Triple-helix molecular switch-based versatile "off-on" electrochemiluminescence and fluorescence biosensing platform for ultrasensitive detection of lipopolysaccharide by multiple-amplification strategy

Supramolecular assembly-induced electrochemiluminescence enhancement of gold nanoclusters for hemoglobin detection

Gold nanoclusters (Au NCs) with excellent optical properties and biocompatibility have become one of the most promising electrochemiluminescence (ECL) emitters. However, the low efficiency and poor stability of Au NCs restrict their applications in ECL. Herein, by supramolecular assembly of L-arginine (Arg) and 4-hydroxy-2-mercapto-6-methylpyrimidine (MTU) on the surface of Au NCs, Arg/MTU-Au NCs with enhanced ECL efficiency and stability were prepared. Compared with the MTU-stabilized Au NCs (MTU-Au NCs), the ECL efficiency of Arg/MTU-Au NCs increased by 24.8 times. As a proof-of-concept, a sensitive biosensing platform was constructed for sensitive detection of hemoglobin (Hb) in urine using Arg/MTU-Au NCs as ECL emitters. The proposed ECL detection platform provides a feasible strategy for the detection of biomarkers in urine and has broad application prospects in disease screening and clinical marker detection.

Simultaneous detection of C-reactive protein and lipopolysaccharide based on a dual-channel electrochemical biosensor for rapid Gram-typing of bacterial sepsis

Sepsis is a life-threatening multi-organ failure syndrome, with bacterial infections being the most common cause. Rapid Gram-typing is imperative to assist in antibiotic intervention. C-reactive protein (CRP) and lipopolysaccharide (LPS) are effective biomarkers for discerning the Gram type of bacteria but differ by several orders of magnitude in clinical detection, thereby impeding their simultaneous detection. And two independent methods are time-consuming and laborious. In this study, a dual-channel electrochemical biosensor was developed for simultaneous detection of LPS and CRP. Under optimal conditions, linear ranges of LPS (0.5-1000 pg/mL) and CRP (0.1-20 μg/mL) were obtained in line with the clinical evaluation scopes. In simulated sample tests, Gram-positive, Gram-negative, and healthy plasma samples were clearly distinguished by the developed biosensors, and these results were consistent with that of enzyme-linked immunosorbent assay (ELISA). In addition, the results of the plasma samples tested by the electrochemical biosensor matched those derived from blood cultures in the laboratory. Collectively, the electrochemical biosensor was expected to provide the scientific basis for the rapid Gram-typing and point-of-care detection of bacterial sepsis.

Triple-Mode Sensor Coupled by Photoelectrochemical, Electrochromic, and Spectral Signals for Sensitive Visualized Detection of Nonylphenol

Conventional photoelectrochemical (PEC) biosensors suffer from the difficulty of visualizing rapid detection and limited accuracy due to a single-signal output. Here, we develop a PEC, electrochromic (EC), and spectral (ST) triple-mode platform for the sensitive visualized detection of nonylphenol (NP). First, the reasonably stepped Fermi energy level arrangement between the defective TiO2 anode and MoO3 cathode enables a remarkable photocurrent response (Mode 1). Then, MoO3 itself is a widely used EC candidate, which can react with free Li-ions to form a LixMoO3 intermediate, and its color will change from white to blue accordingly (Mode 2). More importantly, MoO3 is also a Li-ion host and the potential of LixMoO3 depends on the inserted Li-ion quantity deduced by spectral analysis on residual Li-ions in the electrolyte (Mode 3). The EC signal endows fast visual detection, and triple-mode cross-validation improves reliability and accuracy. As a result, this PEC-EC-ST triple-mode molecularly imprinted sensor has a wide linear range (1-5000 μg L-1), a low detection limit (0.18 μg L-1), selectivity, stability, reproducibility, and actual sample detection capability. This innovative multimode platform not only improves detection reliability but also broadens applications of electrochromic/energy storage materials in biosensors.

Highly sensitive detection of circulating tumour cells based on an ASV/CV dual-signal electrochemical strategy

Circulating tumour cells (CTCs), as a tumour marker, may provide more information in early diagnosis and accurate therapy of cancer patients. Electrochemical detection of CTCs has exhibited exceptional advantages. However, single-signal electrochemical detection usually has a high probability of false positives coming from interferents, operating personnel, and nonstandard analytical processes. Herein, a dual-signal strategy using anodic stripping voltammetry (ASV) and cyclic voltammetry (CV) for highly sensitive detection of CTCs was developed. When MCF-7 cells were present, aptamer DNA (DNA1)-magnetic beads (MBs) were captured by CTCs and detached from the biosensing electrodes. Following magnetic separation, polystyrene bead (PS)-CdS QDs labelled on MCF-7 cells were dissolved by HNO3 and the intensity of the oxidation peak current of Cd2+ ions was proportional to the amount of MCF-7 cells in ASV (y = 6.8929 lg Ccells + 1.0357 (Ccells, cells per mL; R2, 0.9947; LOD, 3 cells per mL)). Meanwhile, the anodic peak currents of the remaining electrode in CV were also proportional to the amount of MCF-7 cells (y = 3.7891 lg Ccells + 52.3658 (Ccells, cells per mL; R2, 0.9846; LOD, 3 cells per mL)). An ASV/CV dual-signal biosensor for electrochemical detection of CTCs was achieved, which overcame the limitations of any single-signal mode and improved the detection reliability and precision.

A convenient fluorescent/electrochemical dual-mode biosensor for accurate detection of Pb2+ based on DNAzyme cycle

The presence of heavy metals in the ecological environment is a serious threat to human health. Therefore, it is very important to establish a simple and sensitive method for the detection of heavy metals. Currently, most of the methods are single-channel sensing, and these methods are prone to false-positive signals, which reduces the accuracy. In this work, Pb²⁺-DNAzyme was immobilized on magnetic beads (MBs) using a linkage of biotin and streptavidin and successfully applied to the construction of a fluorescent/electrochemical dual-mode (DM) biosensor. The supernatant after magnetic separation formed a double strand on the electrode, which was combined with methylene blue (MB) for electrochemical detection (EC). At the same time, FAM-d was added to the precipitate, and after magnetic separation, the supernatant was subjected to fluorescent detection (FL). Under optimal conditions, the signal response of the constructed dual-mode biosensor showed a good linear relationship with the concentration of Pb²⁺. The DNAzyme-based dual-mode biosensor achieved sensitive and selective detection of Pb²⁺ with good accuracy and reliability, opening a new way for the development of biosensing strategies for the detection of Pb²⁺. More importantly, the sensor has high sensitivity and accuracy for the detection of Pb²⁺ in actual sample analysis.

Self-Powered DNAzyme Walker Enables Dual-Mode Biosensor Construction for Electrochemiluminescence and Electrochemical Detection of MicroRNA

Herein, an electrochemiluminescence (ECL) and electrochemical (EC) dual-mode biosensor platform with a self-powered DNAzyme walking machine was established for accurate and sensitive detection of miRNA-21. By employing a magnesium ion (Mn²⁺)-dependent DNAzyme cleavage cycling reaction, the walking machine was built by assembling DNAzyme walking strands and ferrocene (Fc)-labeled substrate strands on the Au nanoparticles and graphitic carbon nitride nanosheet (g-C₃N₄ NS)-covered electrode. The DNAzyme walking strand was first prohibited by a blocker strand. After the addition of target miRNA-21 and Mn²⁺, the DNAzyme walker could be activated and produce autonomous movements along the electrode track fueled by Mn²⁺-dependent DNAzyme-catalyzed substrate cleavage without additional energy supply. Notably, each walking step resulted in the cleavage of a substrate strand and the release of a Fc-labeled DNA strand fragment, allowing us to acquire an extreme ECL signal recovery of g-C₃N₄ inhibited by Fc. Meanwhile, numerous Fc-labeled DNA fragments escaped from the surface of the electrode, directly producing an obvious decrease in the square wave voltammetry (SWV) signal from Fc on the same sensing platform. This work not only avoided difficultly assembling various signal indicators but also significantly improved the sensitivity through using self-powered DNAzyme-walker amplification. Moreover, the proposed design employed the same reaction to produce two signal output modes, which could eliminate the interference from diverse reactive pathways on the outcome to mutually improve the accuracy. Therefore, the dual-mode miRNA-21 biosensor exhibited wide detection ranges of 100 aM to 100 nM with low detection limits of 54.3 and 78.6 aM by ECL and SWV modes, respectively, which provided an efficient and universal biosensing approach with extensive applications in early disease diagnosis and bioanalysis.

Simple and fast colorimetric detection of lipopolysaccharide based on aptamer and SYBR Green I mediated aggregation of gold nanoparticles

Lipopolysaccharide (LPS) poses a considerable threat to food safety and human health. A colorimetric assay for LPS detection based on LPS binding aptamer (LBA) and SYBR Green I (SG) mediated aggregation of gold nanoparticles (AuNPs) was established. In the absence of LPS, the LBA was absorbed onto the AuNPs surface which prevented SG-induced aggregation of AuNPs, and the sensing system exhibited red color. When LPS was added, it interacted with the LBA, forming a complex. At higher LPS concentration, many LBAs were exhausted resulting in SG-induced aggregation of AuNPs, and color change from red to blue. The range of colorimetric detection of LPS was linear in 0-12 EU/mL, with a limit of detection of 0.1698 EU/mL. Spiked LPS in real samples and interfering substances were also identified. This assay ingeniously using the fluorescent dye SG as an effective trigger of AuNPs aggregation, is rapid and facile than most of those earlier reported LBA-based LPS assays, and there is potential to be modified to construct assays for other targets.

Boronate Affinity-Amplified Electrochemical Aptasensing of Lipopolysaccharide

As lipopolysaccharide (LPS) is closely associated with sepsis and other life-threatening conditions, the point-of-care (POC) detection of LPS is of significant importance to human health. In this work, we illustrate an electrochemical aptasensor for the POC detection of low-abundance LPS by utilizing boronate affinity (BA) as a simple, efficient, and cost-effective amplification strategy. Briefly, the BA-amplified electrochemical aptasensing of LPS involves the tethering of the aptamer receptors and the BA-mediated direct decoration of LPS with redox signal tags. As the polysaccharide chain of LPS contains hundreds of cis-diol sites, the covalent crosslinking between the phenylboronic acid group and cis-diol sites can be harnessed for the site-specific decoration of each LPS with hundreds of redox signal tags, thereby enabling amplified detection. As it involves only a single-step operation (∼15 min), the BA-mediated signal amplification holds the significant advantages of unrivaled simplicity, rapidness, and cost-effectiveness over the conventional nanomaterial- and enzyme-based strategies. The BA-amplified electrochemical aptasensor has been successfully applied to specifically detect LPS within 45 min, with a detection limit of 0.34 pg/mL. Moreover, the clinical utility has been validated based on LPS detection in complex serum samples. As a proof of concept, a portable device has been developed to showcase the potential applicability of the BA-amplified electrochemical LPS aptasensor in the POC testing. In view of its simplicity, rapidness, and cost-effectiveness, the BA-amplified electrochemical LPS aptasensor holds broad application prospects in the POC testing.

A sensitive electrochemiluminescence biosensor for assay of cancer biomarker (MMP-2) based on NGQDs-Ru@SiO2 luminophore

A sensitive biosensor that can be used for the determination of matrix metalloproteinase 2 (MMP-2) was proposed. The biosensor was developed by using an excellent self-enhanced nanocomposites as an illuminant and a peptide as a recognition element. For the electrostatic attraction between Ru(bpy)₃²⁺ and nitrogen-doped graphene quantum dots (NGQDs), the self-enhanced electrochemiluminescence (ECL) nanocomposites of NGQDs-Ru(bpy)₃²⁺-doped silica nanoparticles (NGQDs-Ru@SiO₂) were synthesized through a simple sol-gel process. Then, a specific peptide (labeled sulfhydryl) was combined with the self-enhanced ECL nanocomposites (carboxyl in NGQDs) via acylation reaction to obtain the peptide-NGQDs-Ru@SiO₂ nanoprobe, which was fabricated onto the gold electrode surface via Au-S bond. The peptide of the ECL nanoprobe was exposed to cleavage in the presence of MMP-2, which caused the signal substance to move farther away from the electrode, leading to a decrease of the ECL signal. The proposed NGQDs-Ru@SiO₂-labeled peptide ECL biosensor displayed a lower detection limit of 6.5 pg mL^-1 than those of reported ECL methods. The proposed biosensor provided an outlook for future applications in other disease-associated biomarkers.

A CRISPR/Cas12a-Mediated Dual-Mode Electrochemical Biosensor for Polymerase Chain Reaction-Free Detection of Genetically Modified Soybean

A clustered regularly interspaced short palindromic repeats (CRISPR)/Cas12a-mediated dual-mode electrochemical biosensor without polymerase chain reaction (PCR) amplification was designed for sensitive and reliable detection of genetically modified soybean SHZD32-1. A functionalized composite bionanomaterial Fe3O4@AuNPs/DNA-Fc&Ru was synthesized as the signal unit, while a characteristic gene fragment of SHZD32-1 was chosen as the target DNA (tDNA). When Cas12a, crRNA, and tDNA were present simultaneously, a ternary complex Cas12a-crRNA-tDNA was formed, and the nonspecific cleavage ability of the CRISPR/Cas12a system toward single-stranded DNA was activated. Thus, the single-stranded DNA-Fc in the signal unit was cleaved, resulting in the decrease in the fast scan voltammetric (FSV) signal from ferrocene (Fc) and the increase in the electrochemiluminescence (ECL) signal from ruthenium complex (Ru) inhibited by Fc. The linear range was 1-107 fmol/L for ECL and 10-108 fmol/L for FSV, and the limit of detection (LOD) was 0.3 fmol/L for ECL and 3 fmol/L for FSV. Accuracy, precision, stability, selectivity, and reliability were all satisfied. In addition, PCR-free detection could be completed in an hour at room temperature without requiring complicated operation and sample processing, showing great potential in the field detection of genetically modified crops.

An "off-on" electrochemiluminescence biosensor coupled with strand displacement-powered 3D micromolecule walking nanomachine for ultrasensitive detection of adenosine triphosphate

A three-dimensional (3D) micromolecule walking nanomachine propelled by strand displacement was developed to establish a novel switching electrochemiluminescence (ECL) biosensor for ultrasensitive detection of adenosine triphosphate (ATP). Generally, walking nanomachines reported previously were limited to DNA walkers, while the proposed 3D walking nanomachine focused on the micromolecule walker. Firstly, TiO₂ and silver nanoparticles (Ag NPs) functionalized N-(4-aminobutyl)-N-(ethylisoluminol) (Ag-ABEI) were deposited onto the electrode surface to offer an enhanced ECL signal, resulting from the double catalytic effect of TiO₂ and Ag NPs for H₂O₂. Following, dopamine (DA)-labeled DNA duplex probes (S1/S2-DA) immobilized onto the modified electrode cut down the original ECL signal due to the quenching of DA toward ABEI (signal-off). Target ATP walker moved along the 3D DNA track, simultaneously releasing numerous DNA3, which was applied to displace S2-DA, resulting in the quenched ECL intensity recovery (signal-on). As a result, the biosensor showed a low limit of detection down to 0.5 nM (S/N = 3) and was successfully employed to determine ATP in human serum samples. Thus, the established biosensing strategy holds great potential for biochemical studies and clinical diagnosis.

"Dual Signal-On" Split-Type Aptasensor for TNF-α: Integrating MQDs/ZIF-8@ZnO NR Arrays with MB-Liposome-Mediated Signal Amplification

Ultrasensitive and accurate detection of biomarkers in serum is of great importance for disease diagnosis and treatment. So far, the commonly used single-mode signal suffers from certain instinct drawbacks that restrict assay performances. Herein, we report the proof-of-concept fabrication of a split-type photoelectrochemical (PEC) and electrochemical (EC) dual-modal aptasensor for ultrasensitively tracing tumor necrosis factor-α, a noteworthy biological biomarker with essential clinical importance. By smart integrating molybdenum disulfide QDs/zeolitic imidazolate framework-8@ZnO nanorod arrays with a methylene blue-liposome-mediated signal amplification strategy, "dual signal-on" detection is accomplished based on a sandwich reaction of the target with aptamer-anchored carboxyl magnetic beads and an aptamer-confined MB liposome. Linear ranges of 5 fg/mL-5 μg/mL (detection limit 1.46 fg/mL) for PEC and 10 fg/mL-0.5 μg/mL (detection limit 6.14 fg/mL) for EC are obtained, respectively. An independent signal transduction mechanism supports the accuracy improvement, and a separate biological process from a translator enables convenient fabrication, short-time consumption, wider linearity, as well as outstanding reproducibility and stability in practical application. This work presents a universal bioassay route with prospects in biomedical and related areas.

Sensitive Dual-Mode Biosensors for CYFRA21-1 Assay Based on the Dual-Signaling Electrochemical Ratiometric Strategy and "On-Off-On" PEC Method

Herein, an electrochemical (EC)-photoelectrochemical (PEC) dual-mode biosensor was constructed for cytokeratin 19 fragment 21-1 (CYFRA21-1) assay based on the dual-signaling electrochemical ratiometric strategy and "on-off-on" PEC method. The indium tin oxide (ITO) electrode was modified by 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA)@C₆₀ and gold nanoparticles (Au NPs), and the double-stranded DNA composed of thiol/methylene blue (MB)-labeled single-stranded DNA (ssDNA) (S0-MB) and antibody/ferrocene (Fc)-labeled ssDNA (Ab1-S1-Fc) was immobilized on the Au NPs/PTCDA@C₆₀/ITO electrode via the Au-S bond between Au NPs and thiol of S0-MB. With the help of another antibody-labeled ssDNA (Ab2-S2), the presence of CYFRA21-1 triggered a typical antigen-antibody sandwich immune reaction (Ab1, CYFRA21-1, and Ab2) and proximity hybridization between Ab1-S1-Fc and Ab2-S2. This caused the release of Ab1-S1-Fc from the modified electrode and the change of S0-MB to a hairpin structure, resulting in a decrease (an increase) of the oxidation peak current of Fc (MB) and an increase of the photocurrent due to the enhancing (inhibiting) effect of MB (Fc) on the photoelectric performance of the Au NPs/PTCDA@C₆₀/ITO electrode. Thus, CYFRA21-1 was detected by the developed EC-PEC dual-mode sensing platform sensitively, and the linear response ranges of 0.001-40 ng/mL with a detection limit of 0.3 pg/mL for the EC technique and 0.0001-4 ng/mL with a detection limit of 0.03 pg/mL for the PEC method were obtained. Furthermore, by changing the specific antibodies of disease-related biomarkers, the developed dual-mode biosensing platform could be readily extended to detect other antigens, implying its great potential applications in biological analysis and early disease diagnosis.

Open Surface Droplet Microfluidic Magnetosensor for Microcystin-LR Monitoring in Reservoir

Establishing rapid, simple, and in situ detection of microcystin-LR (MC-LR) in drinking water sources is of significant importance for human health. To ease the situation that current methods cannot address, an open surface droplet microfluidic magnetosensor was designed and validated to quantify MC-LR in reservoir water, which is capable of (1) MC-LR isolation via MC-LR antibody-conjugated magnetic beads, (2) parallel and multistep analytical procedures in 15-array power-free and reusable active droplet microfluidic chips, (3) immunoassay incubation and fluorescence excitation within a miniaturized multifunctional 3D-printing optosensing accessory, and (4) signal read-out and data analysis by a user-friendly Android app. The proposed smartphone-based fluorimetric magnetosensor exhibited a low limit of detection of 1.2 × 10^-5 μg/L in the range of 10^-4 μg/L to 100 μg/L. This integrated and high throughput platform was utilized to draw an MC-LR contamination map for six reservoirs distributed in the Pearl River delta, Guangdong Province. It promises to be a simple and successful quantification method for MC-LR field detection, bringing many benefits to rapid on-site screening.