Paper-based 3D culture device integrated with electrochemical sensor for the on-line cell viability evaluation of amyloid-beta peptide induced damage in PC12 cells

Stretchable Sponge-Based Electrochemical Biosensor for Real-Time Sensing of Cells in Three-Dimensional Culture

For the study of cell biology, real-time information on cell physiological processes will be more accurate and closer to the in vivo condition in a three-dimensional (3D) culture system. Although most reported 3D cell culture scaffolds can better mimic the in vivo dynamic microenvironment, the real-time analysis technique is deficient or lacking. Herein, a stretchable and conductive 3D scaffold is developed to construct an electrochemical biosensor for real-time monitoring of cell release in 3D culture under stimulation of drug stimulant and mechanical force. In our design, the polyurethane sponge (PU) dipped with conductive carbon ink (CC/PU) was used as a conductive scaffold, and gold nanoparticles (nano-Au) were electrodeposited on the CC/PU (nano-Au CC/PU) to improve the electrochemical sensing performance. The prepared nano-Au CC/PU scaffold exhibits a good electrocatalytic ability to H2O2 with a linear range from 20 nM to 43 μM. Due to the great biocompatibility, HeLa cells can be cultured directly on the nano-Au CC/PU and the in situ and real-time tracking of H2O2 secretion from cells was achieved. The results demonstrate that both the drug stimulant and mechanical force can rapidly activate the release of reactive oxygen species. This study indicates that the stretchable 3D sensing scaffold has good potential for cell biology research in an in vivo-like microenvironment and can be extensively used in the fields of tissue engineering, drug screening, and pathological research.

Three-dimensional flexible and stretchable gold foam scaffold for real-time electrochemical sensing in cells and in vivo

Compared with typical two-dimensional electrodes, the three-dimensional (3D) cell culture platform can simulate the real cell survival environment for cell growth to accurately reproduce cell functions. Moreover, considering that living cells are exposed to various of mechanical force in the microenvironment, the construction of 3D electrodes with excellent flexible, stretchable, and biocompatibility is of great significance to real-time monitor mechanically evoked biomolecule release from cells. Herein, we demonstrated a straightforward and effective three-step approach to fabricate three-dimensional flexible and stretchable gold foam scaffold (3D Au foam scaffold) for construction of 3D cell culture integrated electrochemical sensing platform. The excellent biological and electrical properties of Au nanostructures and porous networks of the 3D scaffold endow the platform with desirable biocompatibility and sensitive electrochemical sensing performance. As a proof of concept, the 3D Au foam scaffold functionalized with cobalt based nanocubes (Co NCs/Au foam scaffold) was validated to provide 3D culture for human umbilical vein endothelial cells (HUVECs), and synchronously real-time monitor superoxide anion (O₂^•-) released by HUVECs under mechanical stretching. Furthermore, 3-mercaptopropionic acid (3-MPA) modified 3D Au foam (3-MPA/Au foam scaffold) was successfully used for real-time monitoring of catecholamines in rat brain. The results demonstrate the great potential of this 3D Au foam scaffold for real-time electrochemical monitoring biomolecules in vitro and in vivo, providing convenience for future research on mechanotransduction relevant processes.

PC-12 Cell Line as a Neuronal Cell Model for Biosensing Applications

PC-12 cells have been widely used as a neuronal line study model in many biosensing devices, mainly due to the neurogenic characteristics acquired after differentiation, such as high level of secreted neurotransmitter, neuron morphology characterized by neurite outgrowth, and expression of ion and neurotransmitter receptors. For understanding the pathophysiology processes involved in brain disorders, PC-12 cell line is extensively assessed in neuroscience research, including studies on neurotoxicity, neuroprotection, or neurosecretion. Various analytical technologies have been developed to investigate physicochemical processes and the biosensors based on optical and electrochemical techniques, among others, have been at the forefront of this development. This article summarizes the application of different biosensors in PC-12 cell cultures and presents the modern approaches employed in neuronal networks biosensing.

Designing of various biosensor devices for determination of apoptosis: A comprehensive review

Apoptosis is a type of cell death caused by the occurrence of both pathological and physiological conditions triggered by ligation of death receptors outside the cell or triggered by DNA damage and/or cytoskeleton disruption. Timely monitoring of apoptosis can effectively help early diagnosis of related diseases and continuous assessment of the effectiveness of drugs. Detecting caspases, a protease family closely related to cellular apoptosis, and its identification as markers of apoptosis is a popular procedure. Biosensors are used for early diagnosis and play a very important role in preventing disease progression in various body sections. Recently, there has been a widespread increase in the desire to use materials made of paper (e.g. nitrocellulose membrane) for Point-of-Care (POC) testing systems since paper and paper-like materials are cheap, abundant and degradable. Microfluidic paper-based analytical devices (μPADs) are highly promising as they are cost-effective, easy to use, fast, precise and sustainable over time and under different environmental conditions. In this review, we focused our efforts on compiling the different approaches on identifying apoptosis pathway while giving brief information about apoptosis and biosensors. This review includes recent advantages in biosensing techniques to simply determine what happened in the cell life and which direction it would continue. As a conclusion, we believed that the review may help to researchers to compare/update the knowledge about diagnosis of the apoptosis pathway while reminding the basic definitions about the apoptosis and biosensor technologies.

A Three-Dimensional Electrochemical Biosensor Integrated with Hydrogel Enables Real-Time Monitoring of Cells under Their In Vivo-like Microenvironment

Three-dimensional (3D) cell culture can better reproduce the in vivo cell environment and has been extensively used in fields such as tissue engineering, drug screening, and pathological research. Despite the tremendous advancement of 3D cultures, an analysis technique that could collect real-time information of the biological processes therein is sorely lacking. Electrochemical sensing with fast response and high sensitivity has played a vital role in real-time monitoring of living cells, but most current sensors are based on planar electrodes and fail to perfectly match the 3D cell culture matrix. Herein, we developed a robust 3D electrochemical sensor based on functionalized graphene foam (GF), which could be integrated with hydrogels for the 3D culture and in situ monitoring of cells for the first time. Specifically, platinum nanoparticles (Pt NPs) electrodeposited on GF (GF/Pt NPs) conferred the prominent electrochemical sensing performance, and the anti-fouling coating of poly(3,4-ethylenedioxythiophene) (PEDOT) endowed the GF/Pt NPs electrode with greatly improved stability. As a proof of concept, collagen hydrogel with microglia seeded in was filled into the interspace of the 3D GF/Pt NPs/PEDOT sensor to establish an integrated platform, which allowed the successful real-time monitoring of reactive oxygen species released from microglia in the collagen matrix. Given the versatility, our proposed biosensor in conjunction with various 3D culture models will serve as an excellent tool to provide biochemical information of cells under their in vivo-like microenvironment.

Paper-supported co-culture system for dynamic investigations of the lung-tropic migration of breast cancer cells

Tumor tropism metastasis is a multi-step process that involves interactions between tumor cells and the microenvironment. Due to the limitations of experimental techniques, current studies are not able to gain insight into the dynamic process of such tropism migration. To overcome this issue, we developed a paper-supported co-culture system for dynamic investigations of the lung-tropic migration of breast cancer cells. This co-culture system contains a tumor layer, a recruitment layer, and several invasion layers between these two parts. The tumor and recruitment layers are impregnated with breast cancer cells and lung cells, respectively. Stacking these layers forms a co-culture device that comprises interactions between breast cancer and lung, destacking such a device represents cancer cells at different stages of the migration process. Thus, the paper-supported co-culture system offers the possibility of investigating migration from temporal and spatial aspects. Invasion assays using the co-culture system showed that breast cancer cells induced lung fibroblasts to convert to cancer-associated fibroblasts (CAFs), and the CAFs, in turn, recruited breast cancer cells. During migration, the local invasion of the cancer cells is a collective behavior, while the long-distance migration comes from individual cell behaviors. Breast cancer cells experienced repetitive processes of migration and propagation, accompanied by epithelial-mesenchymal and mesenchymal-epithelial transitions, and changes in stemness and drug resistance. Based on these results, the lung-tropic migration of breast cancer is interpreted as a process of bilateral interaction with the local and host-organ microenvironment. The developed paper-supported co-culture system offers the possibility of dynamically investigating tropism migration under the pre-metastatic niche, thus providing an advantageous tool for studying tumor metastasis.

Paper-Based Screen-Printed Electrodes: A New Generation of Low-Cost Electroanalytical Platforms

Screen-printed technology has helped considerably to the development of portable electrochemical sensors since it provides miniaturized but robust and user-friendly electrodes. Moreover, this technology allows to obtain very versatile transducers, not only regarding their design, but also their ease of modification. Therefore, in the last decades, the use of screen-printed electrodes (SPEs) has exponentially increased, with ceramic as the main substrate. However, with the growing interest in the use of cheap and widely available materials as the basis of analytical devices, paper or other low-cost flat materials have become common substrates for SPEs. Thus, in this revision, a comprehensive overview on paper-based SPEs used for analytical proposes is provided. A great variety of designs is reported, together with several examples to illustrate the main applications.

PHAIR: a biosensor for pH measurement in air-liquid interface cell culture

In many biological systems, pH can be used as a parameter to understand and study cell dynamics. However, measuring pH in live cell culture is limited by the sensor ion specificity, proximity to the cell surface, and scalability. Commercially available pH sensors are difficult to integrate into a small-scale cell culture system due to their size and are not cost-effective for disposable use. We made PHAIR-a new pH sensor that uses a micro-wire format to measure pH in vitro human airway cell culture. Tungsten micro-wires were used as the working electrodes, and silver micro-wires with a silver/silver chloride coating were used as a pseudo reference electrode. pH sensitivity, in a wide and narrow range, and stability of these sensors were tested in common standard buffer solutions as well as in culture media of human airway epithelial cells grown at the air-liquid interface in a 24 well cell culture plate. When measuring the pH of cells grown under basal and challenge conditions using PHAIR, cell viability and cytokine responses were not affected. Our results confirm that micro-wire-based sensors have the capacity for miniaturization and detection of diverse ions while maintaining sensitivity. This suggests the broad application of PHAIR in various biological experimental settings.

Integrated paper-based 3D platform for long-term cell culture and in situ cell viability monitoring of Alzheimer's disease cell model

Reactive oxygen species including superoxide anion, hydrogen peroxide (H₂O₂) and hydroxyl radicals, as a conflicting class of biological metabolites in living organism, act crucial effect on Alzheimer's disease (AD). In this work, a facile integrated platform composed of a paper-based three-dimension (3D) cell culture system and an electrochemical sensor was developed for the construction of AD cell model in third dimensional structure and in situ cell viability monitoring by H₂O₂ released from PC12 cells cultured on paper scaffold were divided into three groups containing control group, amyloid beta peptide 25-35 (Aβ_25-35) group and Aβ_25-35+curcumin (Aβ_25-35+cur) group, respectively. In addition, the paper-based 3D platform displayed excellent properties, such as sensitivity, selectivity, reproducibility and stability. The levels of H₂O₂ expressed in PC12 cells of the three groups were monitored through a paper-based 3D platform. The viability of cells cultured on the 96-well plate was measured by 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide (MTT) assay. Results of this paper-based platform are consistent with those of MTT, both displaying improved cell viability and decreased H₂O₂ production in Aβ_25-35+cur group compared to Aβ_25-35 group, which indicates that curcumin has effective cytoprotection. The paper-based 3D platform provides a convenient, economic and universal platform for in situ cell activity monitoring by key small molecules released from living cells.

Engineering next-generation bioinks with nanoparticles: moving from reinforcement fillers to multifunctional nanoelements

The application of additive manufacturing in the biomedical field has become a hot topic in the last decade owing to its potential to provide personalized solutions for patients. Different bioinks have been designed trying to obtain a unique concoction that addresses all the needs for tissue engineering and drug delivery purposes, among others. Despite the remarkable progress made, the development of suitable bioinks which combine printability, cytocompatibility, and biofunctionality is still a challenge. In this sense, the well-established synthetic and functionalization routes to prepare nanoparticles with different functionalities make them excellent candidates to be combined with polymeric systems in order to generate suitable multi-functional bioinks. In this review, we briefly discuss the most recent advances in the design of functional nanocomposite hydrogels considering their already evaluated or potential use as bioinks. The scientific development over the last few years is reviewed, focusing the discussion on the wide range of functionalities that can be incorporated into 3D bioprinted constructs through the addition of multifunctional nanoparticles in order to increase their regenerative potential in the field of tissue engineering.

Lactoferrin-Loaded PEG/PLA Block Copolymer Targeted With Anti-Transferrin Receptor Antibodies for Alzheimer Disease

Last few years, struggles have been reported to develop the nanovesicles for drug delivery via the brain-blood barrier (BBB). Novel drugs, for instance, iAβ5, are efficient to inhibit the aggregates connected to the treatment of Alzheimer disease and are being evaluated, but most of the reports reflect some drawbacks of the drugs to reach the brain in preferred concentrations owing to the less BBB penetrability of the surface dimensions. In this report, we designed and developed a new approach to enhance the transport of drug via BBB, constructed with lactoferrin (Lf)-coated polyethylene glycol-polylactide nanoparticles (Lf-PPN) with superficial monoclonal antibody-functionalized antitransferrin receptor and anti-Aβ to deliver the iAβ5 hooked on the brain. The porcine brain capillary endothelial cells were utilized as BBB typically to examine the framework efficacy and toxicity. The cellular uptake of the immuno-nanoparticles with measured conveyance of the iAβ5 peptide was significantly enhanced and associated with Lf-PPN without monoclonal antibody functionalizations.

Green synthesis of CuO- and Cu2O-NPs in assistance with high-gravity: The flowering of nanobiotechnology

This study, for the first time, reports the synthesis of CuO- and Cu2O nanoparticles (NPs) using the Salvia hispanica extract by a high-gravity technique. The original green synthesis procedure led to the formation of nanoparticles with promising catalytic and biological properties. The synthesized nanoparticles were fully characterized and their catalytic activity was evaluated through a typical Azide-Alkyne Cycloaddition (AAC) reaction. The potential antibacterial activity against gram positive (S. aureus) and gram negative (E. coli) bacteria were investigated. It was shown that the antibacterial properties were independent of the NP morphology as well as of the texture of the synthesis media. As a result, the presently synthesized nanoparticles showed very good photocatalytic and catalytic activities in comparison with the literature. From a biological perspective, they showed lower cytotoxicity in comparison with the literature, and also showed higher antioxidant and antibacterial activities. Thus, these present green CuO and Cu2O nanoparticles deserve further attention to improve numerous medical applications.