Three-dimensional CdS nanosheet-enwrapped carbon fiber framework: Towards split-type CuO-mediated photoelectrochemical immunoassay

Biosensors for natriuretic peptides in cardiovascular diseases. A review

Heart failure (HF) is a complex clinical syndrome associated with high rates of morbidity and mortality. Over the years, it has been crucial to find accurate biomarkers capable of doing a precise monitor of HF and provide an early diagnosis. Of these, it has been established an important role of natriuretic peptides in HF assessment. Moreover, the development of biosensors has been garnering interest as new diagnostic medical tools. In this review we first provide a general overview of HF, its pathogenesis, and diagnostic features. We then discuss the role of natriuretic peptides in heart failure by characterizing them and point out their potential as biomarkers. Finally, we adress the evolution of biosensors development and the available natriuretic peptides biosensors for disease monitoring.

Chemical Redox Cycling in an Organic Photoelectrochemical Transistor: Toward Dual Chemical and Electronic Amplification for Bioanalysis

The organic photoelectrochemical transistor (OPECT) has been proven to be a promising platform to study the rich light-matter-bio interplay toward advanced biomolecular detection, yet current OPECT is highly restrained to its intrinsic electronic amplification. Herein, this work first combines chemical amplification with electronic amplification in OPECT for dual-amplified bioanalytics with high current gain, which is exemplified by human immunoglobulin G (HIgG)-dependent sandwich immunorecognition and subsequent alkaline phosphatase (ALP)-mediated chemical redox cycling (CRC) on a metal-organic framework (MOF)-derived BiVO4/WO3 gate. The target-dependent redox cycling of ascorbic acid (AA) acting as an effective electron donor could lead to an amplified modulation against the polymer channel, as indicated by the channel current. The as-developed bioanalysis could achieve sensitive HIgG detection with a good analytical performance. This work features the dual chemical and electronic amplification for OPECT bioanalysis and is expected to stimulate further interest in the design of CRC-assisted OPECT bioassays.

High-entropy effect with hollow (ZnCdFeMnCu)xS nanocubes for photoelectrochemical immunoassay

High entropy (HE) compounds with chemically disordered multi-cation structures have become a hot research topic because of their fascinating "cocktail effect". However, high entropy effect with the efficient photoelectric response has not been reported for photoelectrochemical (PEC) immunoassays. Herein, an innovative PEC immunoassay for the sensitive detection of prostate-specific antigen (PSA) was ingeniously constructed using hollow nanocubic (ZnCdFeMnCu)xS photoactive matrices with high entropic effect via the cation exchange. Initially, a sandwich-type immunoreaction has behaved using dopamine-loaded liposome labeled with anti-PSA secondary antibodies. In the presence of PSA, addition of Triton X-100 caused the liposomal cleavage to release dopamine, which was then detected as a reduced photocurrent on (ZnCdFeMnCu)xS-based photoelectrode. Under optimal condition, the PEC immunoassay showed good photocurrent responses toward target PSA with the dynamic linear range of 0.1-50 ng mL-1 with a limit of detection of 34.1 pg mL-1. Significantly, this system can provide a new platform for the development of PEC immunoassays by coupling with high-entropy photoactive materials.

Photoelectrochemical biosensor for DNA demethylase detection based on enzymatically induced double-stranded DNA digestion by endonuclease-exonuclease system and Bi4O5Br2-Au/CdS photoactive material

A novel photoelectrochemical (PEC) biosensor for the detection of DNA demethylase MBD2 was developed based on Bi₄O₅Br₂-Au/CdS photosensitive material. Bi₄O₅Br₂ was firstly modified with gold nanoparticles (AuNPs), following with the modification onto the ITO electrode with CdS to realize the strong photocurrent response as a result of AuNPs had good conductibility and the matched energy between CdS and Bi₄O₅Br₂. In the presence of MBD2, double-stranded DNA (dsDNA) on the electrode surface was demethylated, which triggered the digestion activity of endonuclease HpaII to cleave dsDNA and induced the further cleavage of the dsDNA fragment by exonuclease III (Exo III), causing the release of biotin labeled dsDNA and inhibiting the immobilization of streptavidin (SA) onto the electrode surface. As a results, the photocurrent was increased greatly. However, in the absence of MBD2, HpaII digestion activity was inhibited by DNA methylation modification, which further caused the failure in the release of biotin, leading to the successful immobilization of SA onto the electrode to realize a low photocurrent. The sensor had a detection of 0.3-200 ng/mL and a detection limit was 0.09 ng/mL (3σ). The applicability of this PEC strategy was assessed by studying the effect of environmental pollutants on MBD2 activity.

Bioderived establishment of three-dimensional type-I Ag2S/ZnIn2S4 heterojunction for high-efficacy organic photoelectrochemical transistor biomolecular detection

Advanced optoelectronic devices have attracted extensive interdisciplinary interest but lags far behind in biomolecular detection. The nascent organic photoelectrochemical transistor (OPECT) is expected to become a versatile platform to this end. Herein, using biological derivation of type-I Ag₂S/ZnIn₂S₄ heterojunction, a light-fueled high-efficacy OPECT system with zero-gate-biased operation is successfully developed for biomolecular detection. Exemplified by a sandwich immunocomplexing towards mouse IgG (MIgG) with Ag nanoparticles (Ag NPs) as the label, steering the acidolysis-release of Ag⁺ toward ZnIn₂S₄ could induce the in-situ formation of type-I Ag₂S/ZnIn₂S₄ heterojunction, increasing the recombination of light-activated excitons and thus inhibiting the photo-responsibility of ZnIn₂S₄, as sensitively monitored by the amplified OPECT response. The proposed device could achieve good analytical performance in terms of high specificity and sensitivity, with a detection limit as low as 33.7 fg mL^-1. This OPECT device based on bio-induced formation of type-I heterojunction can provide a novel route to biomolecular detection, and offered a new perspective for the optoelectronic sensors to be used in futuristic physiological and pathological detection.

Ferroelectric polarization effect on the photocatalytic activity of Bi0.9Ca0.1FeO3/CdS S-scheme nanocomposites

BiFeO₃ (BFO), as a kind of narrow band-gap semiconductor material, has gradually emerged advantages in the application of photocatalysis. In this paper, Ca doped BFO nanoparticles Bi_0.9Ca_0.1FeO₃ (BCFO) were prepared by sol-gel method. And BCFO and CdS nanocomposites with two morphologies were obtained by controlling the time of loading CdS under a low temperature liquid phase process. It is found that the band gap becomes narrower after doping Ca into BFO, which is conducive to the absorption of visible light. Among all the samples, the composite of CdS nanowires and BCFO nanoparticles obtained by reaction time of 10 min has the best photocatalytic performance. The degradation rate of Methyl Orange solution was 94% after 90 min under visible light irradiation, which was much higher than that of pure BCFO and CdS. Furthermore, significant enhancement in the degradation rate (100% degradation in 60 min) can be achieved in poled samples after electric polarization process. The highest degradation rate is due to the promoted separation of photogenerated carriers induced by the internal polarization field and the formation of S-scheme heterostructure between BCFO and CdS. Such BCFO-CdS nanocomposites may bring new insights into designing highly efficient photocatalyst.

Tunable Competitive Absorption-Induced Signal-On Photoelectrochemical Immunoassay for Cardiac Troponin I Based on Z-Scheme Metal-Organic Framework Heterojunctions

Recently emerged Z-scheme heterostructure-based immunoassays have presented new opportunities for photoelectrochemical (PEC) biosensing development. Here, we described a tunable signal-on PEC biosensor for the detection of cardiac troponin I (cTnI), which exploited a competitive absorption effect between Cu(II) ions and a Zr metal-organic framework (Zr-MOF) constructed on TiO₂ nanorods (Cu²⁺@Zr-MOF@TiO₂ NRs). Water-stable Zr-MOF was coated onto TiO₂ NRs on fluorine-doped tin oxide to form a Z-scheme heterostructure substrate (Zr-MOF@TiO₂ NRs), which exhibited a high photoelectric response. Cu²⁺@Zr-MOF@TiO₂ NRs, constructed by loading Cu(II) ions onto the architecture of Zr-MOF by electrostatic interaction, demonstrated a low background signal. After sandwich immunorecognition within a 96-well plate, H₂S, generated by confined alkaline phosphatase on zeolitic imidazolate framework-8, was directed to react with Cu(II) ions to form CuS. This resulted in an in situ change in the photoelectrode and an enhanced photoelectric signal. The developed PEC biosensing platform exhibited high sensitivity and selectivity for the cTnI immunoassay with a detection limit of 8.6 pg/mL. The Z-scheme-based competition absorption modulation of photoelectrochemistry provides a new strategy for general PEC biosensing development.

Enzymatic photoelectrochemical bioassay based on hierarchical CdS/NiO heterojunction for glucose determination

The design and development of a 3D hierarchical CdS/NiO heterojunction and its application in a self-powered cathodic photoelectrochemical (PEC) bioanalysis is introduced. Specifically, NiO nanoflakes (NFs) were in situ formed on carbon fibers via a facile liquid-phase deposition method followed by an annealing step and subsequent integration with CdS quantum dots (QDs). The glucose oxidase (GOx) was then coated on the photocathode to allow the determination of glucose. Under 5 W 410 nm LED light and at a working voltage of 0.0 V (vs. Ag/AgCl), this method can assay glucose concentrations down to 1.77×10^-9 M. The linear range was 5×10^-7 M to 1×10^-3 M, and the relative standard deviation (RSD) was below 5%. The photocathodic biosensor achieved target detection with high sensitivity and selectivity. This work is expected to stimulate more passion in the development of innovative hierarchical heterostructures for advanced self-powered photocathodic bioanalysis. Design of 3D hierarchical CdS/NiO heterojunction and its application in a self-powered cathodic photoelectrochemical (PEC) bioanalysis.

Nanozyme-Activated Synergistic Amplification for Ultrasensitive Photoelectrochemical Immunoassay

At present, enzyme-mediated signal amplification strategies have been widely applied in photoelectrochemical (PEC) biosensing systems, while the introduction of natural enzymes onto the surface of photoelectrodes inevitably obstructs the electron transfer due to their insulating properties as proteins, leading to severe damage to photocurrent. In this work, the PdPt bimetallic nanozymes with the efficient peroxidase-like activity were used as alternatives to natural enzymes and amplified PEC biosensing signals via their efficient enzymatic reaction and remarkable enhancement in photocurrent. As a result, photoactive CdS nanorods modified with PdPt bimetallic nanozymes showed a boosted PEC performance compared with the pristine CdS nanorods due to the localized surface plasmon resonance effect and Schottky junction. On the basis of the as-prepared CdS/PdPt photoelectrode, a sensitive split-type glucose oxidase-mediated PEC immunoassay for carcinoembryonic antigen (CEA) detection was successfully constructed. Along with the sandwich immunocomplexing, the subsequently produced hydrogen peroxide (H₂O₂) can oxidize 4-chloro-1-naphthol into insoluble precipitates to inhibit photocurrent and simultaneously trigger the bio-etching of CdS to further restrain photocurrent signals due to the excellent peroxidase-mimicking activity of PdPt nanozymes. Owing to the synergistic signal amplification fulfilled by PdPt nanozymes, an ultrasensitive immunoassay of CEA was realized with a wider linear range from 1 to 5000 pg/mL and a low detection limit of 0.21 pg/mL, opening a new avenue for building ultrasensitive PEC biosensors with nanozymes.

Methods of Encapsulation of Biomacromolecules and Living Cells. Prospects of Using Metal–Organic Frameworks

The review discusses different methods of encapsulation and biomineralization of macromolecules and living cells. Main advantages and disadvantages of most commonly used carriers, matrices, and materials for immobilization of proteins, enzymes, nucleic acids, and living cells are briefly surveyed. Examples of delivery vehicles for multifunctional encapsulation of protein-like substances are presented. Particular attention is paid to prospects of using metal–organic frameworks in medicine and biotechnology.

Fullerenol as a photoelectrochemical nanoprobe for discrimination and ultrasensitive detection of amplification-free single-stranded DNA

Traditional approaches for nucleic acids detection require prior amplification of target genes, while nanomaterials-aided DNA biosensors are very magnificent but still suffer from the nanomaterial acquirement and limited sensitivity (above picomolar level). Herein, fullerenol C60(OH)25, a representative fullerene derivative, was employed as a photoelectrochemical (PEC) nanoprobe to achieve discrimination and ultrasensitive detection of amplification-free single-stranded DNA (ssDNA) down to sub-femtomolar level. The bonded hydroxyl groups with intense density endowed fullerenol to directly recognize and capture ssDNA-AuNPs via the hydrogen bonding interactions (H-bonds), leading to a sharply decreased photocurrent with quenching efficiency up to 85%, which could be attributed to the photo-generated electrons on the conduction band of fullerenol (-4.66 eV) preferentially migrating to the Fermi level of AuNPs (-5.1 eV) rather than the electrode. In the presence of target gene (mutant human p53 gene fragment), the H-bonds between fullerenol and ssDNA were competitively depleted during the base pairing process of complete hybridization between ssDNA and target, making double-stranded DNA-AuNPs (dsDNA-AuNPs) depart so that the photocurrent powerfully recovered. On basis of the photocurrent variation before and after target introduction, this proposed simple, rapid and ultrasensitive PEC biosensor for amplification-free target gene detection illustrated a wide liner ranged from 1 fM to 100 pM and a detection limit of 0.338 fM. This work presented an ingenious strategy for the discrimination and ultrasensitive detection of nucleic acids, and the well-designed PEC biosensor was further conducive to the impetus of clinic diagnostics.

Photochemical deposition of amorphous MoSx on one-dimensional NaNbO3–CdS heterojunction photocatalysts for highly efficient visible-light-driven hydrogen evolution

A novel ternary MoS_x–CdS–NaNbO₃ (MoS_x–CN) photocatalyst was successfully fabricated through a two-step method (hydrothermal synthesis and photo-deposition step).