Mini-pillar microarray for individually electrochemical sensing in microdroplets

Droplet Impedance Feedback-Enabled Microsampling Microfluidic Device for Precise Chemical Information Monitoring

Microelectrodes have transformed our understanding of spatiotemporal responses to electrical stimulation. However, biological signals are often molecular, complicating the capture of intricate chemical signals. The microfluidic chip developed in this paper accurately measures droplet volume by using impedance analysis. The utilization of droplet volume as a feedback signal for precise microsampling pressure control ensures that microsampling remains unaffected by droplet volume influence. Once the microsampling is complete, chemiluminescence detection enables high temporal resolution and continuous and sensitive monitoring of chemical information within the droplets. Experimental verification shows that the chip can avoid volume influence through impedance feedback, achieving consistent and stable microampling at the nanoliter level (0-3 nL). In just 0.3 s, it can perform sensitive chemiluminescence detection of H2O2 and glucose within droplets. The linear detection ranges for these analytes are 10-50,000 and 20-600 μM, respectively, with the limit of detection being 0.648 and 0.334 μM. The significance of this chip lies in its ability to reveal changes in both electrical and chemical signals during transient biological processes. Its potential applications are numerous, encompassing a wide range of emerging areas such as single-cell analysis, cell communication, and cellular immunity.

Integrated phase separation in microliter droplets for ultratrace-enriching biomarker analysis

Ultratrace-enriching biomarker analysis is an effective method for achieving highly accurate and enhanced sensitive detection. In this study, we have developed an enrichment detection platform by combining a minipillar array with an aqueous two-phase system (ATPS) for ultratrace enriching biomarker analysis. After optimizing the enrichment conditions of ATPS, target miRNAs at ultratrace levels specifically accumulate in the DEX-rich phase, which significantly increases the target miRNA concentration-related fluorescence intensity. Compared to non-enriched miRNA in the single-phase PEG solution, the detection limit of ATPS-enriched miRNA had improved more than 200-fold. The ATPS-based enrichment detection strategy offers a novel and convenient approach for the simultaneous detection of biomarkers with ultratrace.

Emerging open-channel droplet arrays for biosensing

Open-channel droplet arrays have attracted much attention in the fields of biochemical analysis, biofluid monitoring, biomarker recognition and cell interactions, as they have advantages with regard to miniaturization, parallelization, high-throughput, simplicity and accessibility. Such droplet arrays not only improve the sensitivity and accuracy of a biosensor, but also do not require sophisticated equipment or tedious processes, showing great potential in next-generation miniaturized sensing platforms. This review summarizes typical examples of open-channel microdroplet arrays and focuses on diversified biosensing integrated with multiple signal-output approaches (fluorescence, colorimetric, surface-enhanced Raman scattering (SERS), electrochemical, etc.). The limitations and development prospects of open-channel droplet arrays in biosensing are also discussed with regard to the increasing demand for biosensors.

Recycling 3D Printed Residues for the Development of Disposable Paper-Based Electrochemical Sensors

Here, we propose a recyclable approach using acrylonitrile-butadiene-styrene (ABS) residues from additive manufacturing in combination with low-cost and accessible graphite flakes as a novel and potential mixture for creating a conductive paste. The graphite particles were successfully incorporated in the recycled thermoplastic composite when solubilized with acetone and the mixture demonstrated greater adherence to different substrates, among which cellulose-based material made possible the construction of a paper-based electrochemical sensor (PES). The morphological, structural, and electrochemical characterizations of the recycled electrode material were demonstrated to be similar to those of the traditional carbon-based surfaces. Faradaic responses based on redox probe activity ([Fe(CN)6]3-/4-) exhibited well-defined peak currents and diffusional mass transfer as a quasi-reversible system (96 ± 5 mV) with a fast heterogeneous rate constant value of 2 × 10-3 cm s-1. To improve the electrode electrochemical properties, both the PES and the classical 3D-printed electrode surfaces were modified with a combination of multiwalled carbon nanotubes (MWCNTs), graphene oxide (GO), and copper. Both electrode surfaces demonstrated the suitable oxidation of nitrite at 0.6 and 0.5 V vs Ag, respectively. The calculated analytical sensitivities for PES and 3D-printed electrodes were 0.005 and 0.002 μA/(μmol L-1), respectively. The proposed PES was applied for the indirect amperometric analysis of S-nitroso-cysteine (CysNO) in serum samples via nitrite quantitation, demonstrating a limit of detection of 4.1 μmol L-1, with statistically similar values when compared to quantitative analysis of the same samples by spectrophotometry (paired t test, 95% confidence limit). The evaluated electroanalytical approach exhibited linear behavior for nitrite in the concentration range between 10 and 125 μmol L-1, which is suitable for realizing clinical diagnosis involving Parkinson's disease, for example. This proof of concept shows the great promise of this recyclable strategy combining ABS residues and conductive particles in the context of green chemical protocols for constructing disposable sensors.

Self-Assembled Microfiber-Like Biohydrogel for Ultrasensitive Whole-Cell Electrochemical Biosensing in Microdroplets

A novel microfiber-like biohydrogel was fabricated by a facile approach relying on electroactive bacteria-induced graphene oxide reduction and confined self-assembly in a capillary tube. The microfiber-like biohydrogel (d = ∼1 mm) embedded high-density living cells and activated efficient electron exchange between cells and the conductive graphene network. Further, a miniature whole-cell electrochemical biosensing system was developed and applied for fumarate detection under -0.6 V (vs Ag/AgCl) applied potential. Taking advantage of its small size, high local cell density, and excellent electron exchange, this microfiber-like biohydrogel-based sensing system reached a linear calibration curve (R² = 0.999) ranging from 1 nM to 10 mM. The limit of detection obtained was 0.60 nM, which was over 1300 times lower than a traditional biosensor for fumarate detection in 0.2 μL microdroplets. This work opened a new dimension for miniature whole-cell electrochemical sensing system design, which provided the possibility for bioelectrochemical detection in small volumes or three-dimensional local detection at high spatial resolutions.

Nanomaterials-based portable electrochemical sensing and biosensing systems for clinical and biomedical applications

Miniaturized electrochemical sensing systems are employed in day-to-day uses in the several area from public health to scientific applications. A variety of electrochemical sensor and biosensor systems may not be effectively employed in real-world diagnostic laboratories and biomedical industries due to their limitation of portability, cost, analytical period, and need of skilled trainer for operating devices. The design of smart and portable sensors with high sensitivity, good selectivity, rapid measurement, and reusable platforms is the driving strength for sensing glucose, lactate, hydrogen peroxide, nitric oxide, mRNA, etc. The enhancement of sensing abilities of such sensor devices through the incorporation of both novel sensitive nanomaterials and design of sensor strategies are evidenced. Miniaturization, cost and energy efficient, online and quantitative detection and multiple sensing ability are the beneficial of the nanostructured-material-based electrochemical sensor and biosensor systems. Owing to the discriminating catalytic action, solidity and biocompatibility for designing sensing system, nanoscale materials empowered electrochemical detection systems are accomplished of being entrenched into/combined with portable or miniaturized devices for specific applications. In this review, the advance development of portable and smart sensing/biosensing systems derived from nanoscale materials for clinical and biomedical applications is described.

Graphical Abstract

Molecular Visual Sensing, Boolean Logic Computing, and Data Security Using a Droplet-Based Superwetting Paradigm

Inspired by information processing and logic operations of life, many artificial biochemical systems have been designed for applications in molecular information processing. However, encoding the binary synergism between matter, energy, and information in a superwetting system remains challenging. Herein, a superwetting paradigm was proposed for multifunctional applications including molecular visual sensing and data security on a superhydrophobic surface. A Triton X-100-encapsulated gelatin (TeG) hydrogel was prepared and selectively decomposed by trypsin, releasing the surfactant to decrease the surface tension of a droplet. Integrating the droplet with the superhydrophobic surface, the superwetting behavior was utilized for visual detection and information encoding. Interestingly, the proposed TeG hydrogel can function as an artificial gelneuron for molecular-level logic computing, where the combination of matters (superhydrophobic surface, trypsin, and leupeptin) acts as inputs to interact with energy (liquid surface tension and solid surface energy) and information (binary character), resulting in superwettability transitions (droplet surface tension, contact angle, rolling angle, and bounce) as outputs. Impressively, the TeG gelneuron can be further developed as molecular-level double cryptographic steganography to encode, encrypt, and hide specific information (including the maze escape route and content of the classical literature) due to its programmability, stimuli responsive ability, and droplet concealment. This study will encourage the development of advanced molecular paradigms and their applications, such as superwetting visual sensing, molecular computing, interaction, and data security.

Superwettable Biosensor for Disease Biomarker Detection

Bioinspired superwettable materials have aroused wide interests in recent years for their promising application fields from service life to industry. As one kind of emerging application, the superwettable surfaces used to fabricate biosensors for the detection of disease biomarkers, especially tumor biomarkers, have been extensively studied. In this mini review, we briefly summarized the sensing strategy for disease biomarker detection based on superwettable biosensors, including fluorescence, electrochemistry, surface-enhanced Raman scattering, and visual assays. Finally, the challenges and direction for future development of superwettable biosensors are also discussed.

Portable electrochemical micro-workstation platform for simultaneous detection of multiple Alzheimer's disease biomarkers

Alzheimer's disease, as a most prevalent type of dementia, is quickly becoming one of the most expensive, lethal, and burdening diseases of this century. Though there are still no efficient therapies, early diagnosis and intervention are important directive significance to clinical works. Here, we develop a portable electrochemical micro-workstation platform consisting of an electrochemical micro-workstation and integrated electrochemical microarray for simultaneously detecting multiple AD biomarkers including Aβ40, Aβ42, T-tau, and P-tau181 in serum. The integrated electrochemical microarray is mainly used for droplet sample manipulation and signal generation. The micro-workstation can regulate signals and transfer the signals to a smartphone by Bluetooth embedded inside. This portable electrochemical micro-workstation platform exhibits excellent analysis performance. The LODs for Aβ40, Aβ42, T-tau, and P-tau181 are 0.125 pg/mL, 0.089 pg/mL, 0.142 pg/mL, and 0.176 pg/mL, respectively, which satisfies the needs of detecting AD biomarkers in serum. The combination of portable micro-workstation and integrated electrochemical microarray provides a promising strategy for the early diagnosis of Alzheimer's disease and personal healthcare.

Functional liquid droplets for analyte sensing and energy harvesting

Over the past century, rapid miniaturization of technologies has helped in the development of efficient, flexible, portable, robust, and compact applications with minimal wastage of materials. In this direction, of late, the usage of mesoscale liquid droplets has emerged as an alternative platform because of the following advantages: (i) a droplet is incompressible and at the same time deformable, (ii) interfacial area of a spherical droplet is minimum for a given amount of mass; and (iii) a droplet interface allows facile mass, momentum, and energy transfer. Subsequently, such attributes have aided towards the design of diverse droplet-based microfluidic technologies. For example, the microdroplets have been utilized as micro-reactors, colorimetric or electrochemical (EC) sensors, drug-delivery vehicles, and energy harvesters. Further, a number of recently reported lab-on-a-chip technologies exploit the motility, storage, and mixing capacities of the microdroplets. In view of this background, the review initiates discussion by highlighting the different attributes of the microdroplets such as size, shape, surface to volume ratio, wettability, and contact line. Thereafter, the effects of the surface or body forces on the properties of the droplets have been elaborated. Finally, the different aspects of such liquid droplet systems towards technological adaptations in health care, sensing, and energy harvesting have been presented. The review concludes with a tight summary on the potential avenues for further developments.

On-demand mixing and dispersion in mini-pillar based microdroplets

The analysis and detection of ultra-trace biomarkers are often carried out in microliter droplets. Common stirring approaches have some difficulties in precise and contactless mixing and dispersion in microdroplets. In this work, an open mini-pillar-based platform that integrates with ultrasound units is developed to achieve contactless mixing and dispersion in microliter samples. On such a platform, mini-pillars can anchor microdroplets as individual microreactors, and each ultrasound unit can be remotely controlled to achieve on-demand contactless micro-stirring, which is also confirmed by mixing and dispersing of Fe3O4 nanoparticles (1 μm) in microdroplets (10 μL). Such on-demand high-throughput mixing and dispersion that integrates ultrasound mixing with microdroplet technology provides a potential robot-based platform for achieving high-throughput and ultra-trace biosensing in microliter droplets.

Droplet array for open-channel high-throughput SERS biosensing

Open-channel and high throughput are two important aspects of clinical diagnosis, correlation biochemical analysis, cell culture techniques and food safety. Here, we propose the mini-pillar based array for open-channel and high-throughput SERS detection of miRNA. The polydimethylsiloxane (PDMS) mini-pillars are used as a high-throughput platform, which have good anchoring and aggregation effects on microdroplets, greatly reducing the amount of analytical solution and facilitate the homogeneous sample distribution after evaporation. The deposited gold nanorods (Au NRs) on the pillars with optimized diameter served as SERS-active substrate, can greatly improve the sensitivity of SERS signal compared to other planar substrates. On the open-channel biological chip, sensitive, simultaneous, and specific detection of breast cancer marker miRNA-1246 can be performed. In this mini-pillar array SERS system, the limit of detection (LOD) is 10^-12 M. The mini-pillar array shows enormous potential for open channel, high-throughput biomolecular detection, providing an opportunity for biomedical point-of-care testing (POCT) and drug screening.