Sandwich magnetically imprinted immunosensor for electrochemiluminescence ultrasensing diethylstilbestrol based on enhanced luminescence of Ru@SiO2 by CdTe@ZnS quantum dots

Covalent organic framework with donor-acceptor structure for rapid and sensitive photothermal sensing detection

Given the serious harm caused by dietary intake of diethylstilbestrol (DES), it is urgent to explore rapid and sensitive DES sensing methods. In this work, a photothermal DES immunochromatography sensor based on covalent organic framework (COF) was constructed. The performance of COF in the field of photothermal sensing was systematically investigated for the first time. A donor-acceptor type of COF with a photothermal conversion rate of 51.17 % was synthesized. The logarithm of the DES concentrations-temperature change value standard curve was plotted. The intensity of the photothermal sensing signal was inversely proportional to the sample concentration. The detection limit of the proposed photothermal method (0.24 μg·L-1) was 10 times higher than that of visual detection (3 μg·L-1). This work not only constructed a novel detection method for DES sensing, but also provided a feasible demonstration for the application of COF in photothermal sensing and expanded the application of their photothermal properties.

Advances on chalcogenide quantum dots-based sensors for environmental pollutants monitoring

Water contamination represents a significant ecological impact with global consequences, contributing to water scarcity worldwide. The presence of several pollutants, including heavy metals, pharmaceuticals, pesticides, and pathogens, in water resources underscores a pressing global concern, prompting the European Union (EU) to establish a Water Watch List to monitor the level of these substances. Nowadays, the standard methods used to detect and quantify these contaminants are mainly liquid or gas chromatography coupled with mass spectrometry (LC/GC-MS). While these methodologies offer precision and accuracy, they require expensive equipment and experienced technicians, and cannot be used on the field. In this context, chalcogenide quantum dots (QDs)-based sensors have emerged as promising, user-friendly, practical, and portable tools for environmental monitoring. QDs are semiconductor nanocrystals that possess excellent properties, and have demonstrated versatility across various sensor types, such as fluorescent, electrochemical, plasmonic, and colorimetric ones. This review summarizes recent advances (2019-2023) in the use of chalcogenide QDs for environmental sensing, highlighting the development of sensors capable of detect efficiently heavy metals, anions, pharmaceuticals, pesticides, endocrine disrupting compounds, organic dyes, toxic gases, nitroaromatics, and pathogens.

Dual-mode biosensor platform based on synergistic effects of dual-functional hybrid nanomaterials

Detection of biomarkers is very vital in the prevention, diagnosis and treatment of diseases. However, due to the poor accuracy and sensitivity of the constructed biosensors, we are now facing great challenges. In addressing these problems, nanohybrid-based dual mode biosensors including optical-optical, optical-electrochemical and electrochemical-electrochemical have been developed to detect various biomarkers. Integrating the merits of nanomaterials with abundant active sites, synergy and excellent physicochemical properties, many bi-functional nanohybrids have been reasonable designed and controllable preparation, which applied to the construction dual mode biosensors. Despite the significant progress, further efforts are still needed to develop dual mode biosensors and ensure their practical application by using portable digital devices. Therefore, the present review summarizes an in-depth evaluation of the bi-functional nanohybrids assisted dual mode biosensing platform of biomarkers. We are hoping this review could inspire further concepts in developing novel dual mode biosensors for possible detection application.

Nanomaterials-Based Electrochemiluminescence Biosensors for Food Analysis: Recent Developments and Future Directions

Developing robust and sensitive food safety detection methods is important for human health. Electrochemiluminescence (ECL) is a powerful analytical technique for complete separation of input source (electricity) and output signal (light), thereby significantly reducing background ECL signal. ECL biosensors have attracted considerable attention owing to their high sensitivity and wide dynamic range in food safety detection. In this review, we introduce the principles of ECL biosensors and common ECL luminophores, as well as the latest applications of ECL biosensors in food analysis. Further, novel nanomaterial assembly strategies have been progressively incorporated into the design of ECL biosensors, and by demonstrating some representative works, we summarize the development status of ECL biosensors in detection of mycotoxins, heavy metal ions, antibiotics, pesticide residues, foodborne pathogens, and other illegal additives. Finally, the current challenges faced by ECL biosensors are outlined and the future directions for advancing ECL research are presented.

An ultrasensitive cathodic electrochemiluminescence immunoassay for thrombomodulin based on Ru(bpy)32+ encapsulated by MIL-NH2-101(Al) nanocomposites

The rapid and reliable determination of thrombomodulin (TM) is of great significance for the diagnosis of disseminated intravascular coagulation, thrombosis and others. This work exhibits an electrochemiluminescent (ECL) sensor, which was prepared using Ru(bpy)₃²⁺ encapsulated by MIL-NH₂-101(Al) nanocomposites for the sensitive detection of the new-thrombus marker thrombomodulin (TM) for the first time. Specifically, on one hand, with the advantages of high specific surface area, large hollow porous structure and favorable biocompatibility, MIL-NH₂-101(Al) could load a large amount of luminescent Ru(bpy)₃²⁺ and thereby greatly enhance the ECL signal of the immunosensor. On the other hand, K₂S₂O₈ is used as co-reactant to form a reduction-oxidation ECL system for cathodic ECL detection with strong anti-interference capacity. The experimental results show that the ECL signal intensity of the Ru(bpy)₃²⁺@MIL-NH₂-101(Al)-based immunosensor decreased with the immunocapturing of TM, exhibiting a linear detection concentration ranging from 1 × 10^-5 to 10 μg mL^-1 and the limit of detection (LOD) of 8.2 × 10^-6 μg mL^-1 (S/N = 3). With its ideal stability, selectivity and reproducibility, the proposed ECL immunosensor can provide excellent aid and shows great promise for the detection of TM.

Progress and Prospects of Electrochemiluminescence Biosensors Based on Porous Nanomaterials

Porous nanomaterials have attracted much attention in the field of electrochemiluminescence (ECL) analysis research because of their large specific surface area, high porosity, possession of multiple functional groups, and ease of modification. Porous nanomaterials can not only serve as good carriers for loading ECL luminophores to prepare nanomaterials with excellent luminescence properties, but they also have a good electrical conductivity to facilitate charge transfer and substance exchange between electrode surfaces and solutions. In particular, some porous nanomaterials with special functional groups or centered on metals even possess excellent catalytic properties that can enhance the ECL response of the system. ECL composites prepared based on porous nanomaterials have a wide range of applications in the field of ECL biosensors due to their extraordinary ECL response. In this paper, we reviewed recent research advances in various porous nanomaterials commonly used to fabricate ECL biosensors, such as ordered mesoporous silica (OMS), metal–organic frameworks (MOFs), covalent organic frameworks (COFs) and metal–polydopamine frameworks (MPFs). Their applications in the detection of heavy metal ions, small molecules, proteins and nucleic acids are also summarized. The challenges and prospects of constructing ECL biosensors based on porous nanomaterials are further discussed. We hope that this review will provide the reader with a comprehensive understanding of the development of porous nanomaterial-based ECL systems in analytical biosensors and materials science.

Ultrasensitive and Highly Selective Detection of Bisphenol a Using Core-Shell Magnetic Molecularly Imprinted Quantum Dots Electrochemiluminescent Probe

The main aim of this work was to develop a magnetic molecularly imprinted polymer (MMIP)-based quantum dots electrochemiluminescent (ECL) probe for the ultrasensitive and highly selective detection of bisphenol A (BPA). The prepared core-shell Fe₃O₄@SiO₂ exhibited superparamagnetic properties, making them easy to separate. The MIP was fabricated by the self-polymerization of dopamine on the surface of amine-terminated Fe₃O₄@SiO₂ (Fe₃O₄@SiO₂-NH₂) magnetic nanoparticles and doped with quantum dots (QDs) to form an ECL system. The ECL intensity decrease with the concentration of BPA increased, due to the BPA molecules occupied molecularly imprinted sites and blocked the strong ECL emission of QDs. The prepared ECL sensor performed satisfactorily in the detection of BPA, with a wide linear range from 10^- 4 to 10^- 9 mol L^- 1 and a low detection limit of 3.4 × 10^- 10 mol L^- 1 (S/N = 3). The recoveries of BPA achieved were in the range 96%-107% in the detection of actual water samples. The proposed ECL sensor displayed high sensitivity and stability, and may provide an approach for determining other important analytes.

Integrating potential-resolved electrochemiluminescence with molecularly imprinting immunoassay for simultaneous detection of dual acute myocardial infarction markers

A novel potential-resolved molecularly imprinted electrochemical luminescence (ECL) immunosensor has been developed for the first time for the dual sensitive detection of markers of acute myocardial infarction (AMI): cardiac troponin I (cTnI) and myoglobin (Mb). In this work, cost-effective and robust molecularly imprinted polymer (MIP) as biomimetic antibody was used to construct the immunosensors through electropolymerization and elution to form polydopamine (PDA)-MIP modified electrode. In the presence of AMI biomarkers, two ECL probes including Ru(bpy)₃²⁺@ MOCs and MoS₂ QDs functionalized by cTnI antibody and Mb aptamer could be specifically captured respectively. And two potential distinct ECL signals will be generated in one potential scan. The intensity of ECL reflects the concentrations of cTnI and Mb. The two ECL probes were characterized with field emission scanning electron microscopy, X-ray diffraction, FT-IR spectrum and UV-Vis diffuse reflectance spectroscopy. The prepared sensor exhibited a wide linear range (0.05-10⁴ ng/mL) and a low detection limit (0.0184 ng/mL for cTnI and 0.0492 ng/mL for Mb). Additionally, the MIP-ECL sensor displayed excellent anti-interference, sensitivity and stability to detect cTnI and Mb. Therefore, it will be conducive to accelerate more precise and credible early diagnosis for AMI.

Regenerative Flexible Upconversion-Luminescence Biosensor for Visual Detection of Diethylstilbestrol Based on Smartphone Imaging

Diethylstilbestrol (DES), an endocrine disrupting chemical, has been linked to serious health problems in humans. In this work, a regenerative flexible upconversion-fluorescence biosensor was designed for the detection of DES in foodstuffs and environmental samples. Herein, amino-functionalized upconversion nanoparticles (UCNPs) were synthesized and immobilized on the surface of a flexible polydimethylsiloxane substrate, which was further modified with complementary DNA and dabcyl-labeled DES aptamer. The fluorescence resonance energy transfer (FRET) system was established for DES detection between dabcyl and UCNPs as the acceptor and donor pairs, respectively, which resulted in the quenching of the upconversion luminescence intensity. In the presence of a target, the FRET system was destroyed and upconversion fluorescence was restored due to the stronger affinity of the aptamer toward DES. The designed biosensor was also implemented in a dual-mode signal readout based on images from a smartphone and spectra from a spectrometer. Under the optimized experimental conditions, good linear relationships were achieved based on imaging (y = 53.055x + 36.175, R² = 0.9851) and spectral data (y = 1.1582x + 1.9561, R² = 0.9897). The designed biosensor revealed great practicability with a spiked recovery rate of 77.91-97.95% for DES detection in real environment and foodstuff samples. Furthermore, the proposed biosensor was regenerated seven times with an accuracy threshold of 80% demonstrating its durability and reusability. Thus, this biosensor is expected to be applied to point-of-care and on-site detection based on the developed portable smartphone device and android application.

Electrochemiluminescence Immunosensor Based on Nanobody and Au/CaCO3 Synthesized Using Waste Eggshells for Ultrasensitive Detection of Ochratoxin A

A novel ultrasensitive electrochemiluminescence (ECL) immunoassay based on Au/CaCO₃ was proposed for detecting ochratoxin A (OTA) in coffee. Au/CaCO₃ nanocomposites synthesized using waste eggshells as the template with a large surface area and excellent electrochemical properties were applied for immobilizing a large amount of Ru(bpy)₃ ²⁺ and conjugating a high-affinity nanobody (prepared by the phage display technique). Coupling of the Au/CaCO₃ nanocomposites and nanobody technologies provided an ultrasensitive and highly selective ECL immunosensor for OTA detection in the range of 10 pg/mL-100 ng/mL with a low detection limit of 5.7 pg/mL. Moreover, the as-prepared ECL immunosensor showed excellent performance and high stability. Finally, the proposed ECL sensor was applied to analyze OTA in coffee samples, confirming the desirable accuracy and practical applicability potential. Overall, this work presents a new nanomaterial for fabricating the sensing interface of immunosensors by harnessing natural waste as the source and a method for detecting toxic OTA in foods.

Nanobody-based immunosensing methods for safeguarding public health

Immunosensing methods are biosensing techniques based on specific recognition of an antigen-antibody immunocomplex, which have become commonly used in safeguarding public health. Taking advantage of antibody-related biotechnological advances, the utilization of an antigen-binding fragment of a heavy-chain-only antibody termed as 'nanobody' holds significant biomedical potential. Compared with the conventional full-length antibody, a single-domain nanobody retaining cognate antigen specificity possesses remarkable physicochemical stability and structural adaptability, which enables a flexible and efficient molecular design of the immunosensing strategy. This minireview aims to summarize the recent progress in immunosensing methods using nanobody targeting tumor markers, environmental pollutants, and foodborne microbes.

Study of the effect of the introduction of Tris(bipyridine)ruthenium(II) chloride into silicon dioxide particles by spectrofluorometry methods

The Stoeber reaction was used to grow silica microparticles in the presence of the fluorescent dye Tris(bipyridine)ruthenium (II) chloride. The diameter of the obtained particles varies from about 150 to 280 nm depending on the dye concentration. Using spectrofluorometry methods, concentration quenching of fluorescence of dye solutions was studied before and after growing the microparticles. It was found out that the concentration quenching of fluorescence decreases significantly after its incorporation into the silicon dioxide microparticles upon excitation in the short-wavelength region of the spectrum.

A review of the incorporation of QDs and imprinting technology in optical sensors – imprinting methods and sensing responses

This review aims to cover the simultaneous method of using molecularly imprinted technology and quantum dots (QDs) as well as its application in the field of optical sensors.

Lithium-Ion-Assisted Ultrafast Charging Double-Electrode Smart Windows with Energy Storage and Display Applications

Lithium-ion-assisted ultrafast charging double-electrode smart windows with energy storage and a fluorescence display device (FTO/PB/Ru@SiO2||Ru@SiO2/WO/FTO) based on double electrochromic electrodes (cathode and anode) (FSDECEs) have been designed and fabricated. Here, Prussian blue (PB) and WOred are selected as the electrochromic cathode and anode, respectively. There is a synergistic effect and a large potential difference between the two electrodes. They could be simultaneously and rapidly bleached after being connected with each other. Also, the fluorescence intensity of Ru@SiO2 nanoparticles (NPs) could be regulated by the fluorescence resonance energy transfer effect (FRET). After discharging, the two electrochromic electrodes in the bleached state can be recharged by a Mg-O2 battery with a FeN5 single atomic catalyst to quickly recover the colored state. The double electrochromic electrodes can reversibly alter between coloring and bleaching states only by connecting and disconnecting the electrodes. The fluorescence intensity of FSDECEs can switch between quenching and emission, thus endowing the "on" and "off" functions. The system is concise, environmentally friendly, and easy to operate. The proposed FSDECEs demonstrate high fluorescence contrast, a fast response time, and long-term stability. Such an ingenious design of fluorescence switching based on the double electrochromic electrode in a single cell sheds light on next-generation transparent, portable, and self-powered electrochromic devices and electronic equipment.

Point-of-Care Diagnostics: Molecularly Imprinted Polymers and Nanomaterials for Enhanced Biosensor Selectivity and Transduction

Significant healthcare disparities resulting from personal wealth, circumstances of birth, education level, and more are internationally prevalent. As such, advances in biomedical science overwhelmingly benefit a minority of the global population. Point-of-Care Testing (POCT) can contribute to societal equilibrium by making medical diagnostics affordable, convenient, and fast. Unfortunately, conventional POCT appears stagnant in terms of achieving significant advances. This is attributed to the high cost and instability associated with conventional biorecognition: primarily antibodies, but nucleic acids, cells, enzymes, and aptamers have also been used. Instead, state-of-the-art biosensor researchers are increasingly leveraging molecularly imprinted polymers (MIPs) for their high selectivity, excellent stability, and amenability to a variety of physical and chemical manipulations. Besides the elimination of conventional bioreceptors, the incorporation of nanomaterials has further improved the sensitivity of biosensors. Herein, modern nanobiosensors employing MIPs for selectivity and nanomaterials for improved transduction are systematically reviewed. First, a brief synopsis of fabrication and wide-spread challenges with selectivity demonstration are presented. Afterward, the discussion turns to an analysis of relevant case studies published in the last five years. The analysis is given through two lenses: MIP-based biosensors employing specific nanomaterials and those adopting particular transduction strategies. Finally, conclusions are presented along with a look to the future through recommendations for advancing the field. It is hoped that this work will accelerate successful efforts in the field, orient new researchers, and contribute to equitable health care for all.