Molecularly imprinted photoelectrochemical sensing based on ZnO/polypyrrole nanocomposites for acrylamide detection

Self-powered molecularly imprinted photoelectrochemical sensor based on Ppy/QD/HOF heterojunction for the detection of bisphenol A

As an emerging porous material, hydrogen-bonded organic framework materials (HOFs) still pose application challenges. In this work, the designed type "I + II" heterojunction extracted hot electrons from HOFs using quantum dots (QDs) and polypyrrole (Ppy), improving the stability and photoelectrochemical performance of materials. In addition to serving as a potential well, electropolymerized Ppy was used as a recognition element for bisphenol A (BPA), and a novel self-powered molecularly imprinted photoelectrochemical (MIP-PEC) sensor was designed. The sensing platform showed a linear relationship from 1 × 10-10 to 1 × 10-7 mol∙L-1 and from 1 × 10-7 to 1 mol∙L-1 with an acceptable detection limit of 4.2 × 10-11 mol∙L-1. This is the first application of HOFs in constructing MIP-PEC sensors and a new attempt to improve the stability of HOFs for the application of porous crystal materials in the sensing field.

Advancements in Chemical and Biosensors for Point-of-Care Detection of Acrylamide

Acrylamide (AA), an odorless and colorless organic small-molecule compound found generally in thermally processed foods, possesses potential carcinogenic, neurotoxic, reproductive, and developmental toxicity. Compared with conventional methods for AA detection, bio/chemical sensors have attracted much interest in recent years owing to their reliability, sensitivity, selectivity, convenience, and low cost. This paper provides a comprehensive review of bio/chemical sensors utilized for the detection of AA over the past decade. Specifically, the content is concluded and systematically organized from the perspective of the sensing mechanism, state of selectivity, linear range, detection limits, and robustness. Subsequently, an analysis of the strengths and limitations of diverse analytical technologies ensues, contributing to a thorough discussion about the potential developments in point-of-care (POC) for AA detection in thermally processed foods at the conclusion of this review.

A molecularly imprinted photoelectrochemical sensor based on an rGO/MoSSe heterojunction for the detection of chlortetracycline

A reduced graphene oxide/molybdenum selenosulfide (rGO/MoSSe) heterojunction was synthesized, and a molecularly imprinted photoelectrochemical sensor for the detection of chlortetracycline was prepared. MoSSe was grown in situ on rGO by a hydrothermal method to form an rGO/MoSSe heterojunction, which acts as the sensitive film of the sensor. Since rGO can promote electron transfer and effectively inhibit electron-hole recombination, it effectively reduces the recombination probability of electrons and holes and improves the photoelectric efficiency, thus enhancing the detection sensitivity of the PEC sensor. The rGO/MoSSe was immobilized on an FTO electrode, and molecularly imprinted polymers (MIPs) were prepared by electropolymerization on the rGO/MoSSe-modified FTO electrode with chlortetracycline as the template molecule and o-phenylenediamine as the functional monomer, so as to construct a molecularly imprinted photoelectrochemical (MIP-PEC) sensor. The determination of chlortetracycline was realized by the strategy of a "gate-controlled effect", and the detection range of the chlortetracycline concentration was 5.0 × 10-13-5 × 10-9 mol L-1 with a detection limit of 1.57 × 10-13 mol L-1. The sensor has been applied to the determination of chlortetracycline in animal-derived food samples.

In2O3/Bi2S3 S-scheme Heterojunction-Driven Molecularly Imprinted Photoelectrochemical Sensor for Ultrasensitive Detection of Florfenicol

Florfenicol (FF) raises significant human health and environmental concerns due to its toxicity to the hematology system and the potential spread of antibiotic-resistant genes. Here, a highly sensitive molecularly imprinted photoelectrochemical (PEC) sensor, featuring an In2O3/Bi2S3 S-scheme heterojunction, is proposed to detect FF without an external voltage supply. Compared with conventional II-type heterojunctions, S-scheme heterojunctions efficiently promote carrier separation and enhance the redox capability of the photocatalytic system. This allows more dissolved O2 and H2O molecules to participate in the redox reaction, resulting in an amplified and stabilized photocurrent response. The electron transfer in the S-scheme heterojunction is confirmed via electron spin resonance (ESR). With the molecular imprinting technique, this PEC platform exhibits exceptional selectivity, wide linear range (1.0 × 10-4-1.0 × 104 ng mL-1), low detection limit (6.4 × 10-5 ng mL-1), and applicability in real milk and chicken samples. This work not only showcases a PEC platform for accurately and portably detecting drugs but also proposes a viable approach for designing S-scheme heterojunctions in sensing analysis.

High-performance Vo-ZnO/ZnS benefiting nanoarchitectonics from the synergism between defect engineering and surface engineering for photoelectrochemical glucose sensors

In this study, a ZnO/ZnS nanocluster heterojunction photoelectrode rich in surface oxygen defects (Vo-ZnO/ZnS) was prepared by applying a simple in situ anion substitution and nitrogen atmosphere annealing method. The synergism between defect and surface engineering significantly improved the photocatalysts. Given this synergism, Vo-ZnO/ZnS was endowed with a long carrier lifetime, narrow band gap, high carrier density, and high performance toward electron transfer under light conditions. Thus, Vo-ZnO/ZnS had three times the photocurrent density of ZnO under light illumination. To further evaluate its advantages in the field of photoelectric bioassay, Vo-ZnO/ZnS was applied as the photocathode of photoelectric sensor system for glucose detection. Vo-ZnO/ZnS showed excellent performance in glucose detection in various aspects, including a low detection limit, high detection sensitivity, and a wide detection range.

MOF/COF heterostructure hybrid composite-based molecularly imprinted photoelectrochemical sensing platform for determination of dibutyl phthalate: A further expansion for MOF/COF application

A novel metal-organic framework (MOF)/covalent-organic framework (COF) heterostructure hybrid composite (NH₂-UiO-66/TpPa-1-COF) with excellent photoactivity was developed, which further acted as the photoelectrochemical sensitized layer of a molecularly imprinted photoelectrochemical (MIP-PEC) sensor for extremely sensitive and selective determination of dibutyl phthalate (DBP). The NH₂-UiO-66/TpPa-1-COF was synthesized using a simple one-step solvothermal method, which showed improved photocurrent response owing to heterojunction formation, favorable energy-band configuration and strong light absorption capacity. To improve the sensing performance, molecularly imprinted polymer (MIP) was developed by sol-gel polymerization method as the recognition component of PEC sensor. The specific binding of imprinting sites towards DBP could block the electron transfer, causing decreased photocurrent response of the MIP-PEC sensor. The MIP-PEC sensor showed a wide detection range from 0.1 nmol L^-1 to 100 μmol L^-1 with a limit of detection of 3.0 × 10^-11 mol L^-1 under optimal conditions. Meanwhile, the proposed MIP-PEC sensor showed good stability, selectivity, reproducibility, and applicability in real samples. This is the first attempt to apply MOF/COF heterostructure hybrid composite for MIP-PEC sensor construction, providing new insight into the potential applications of microporous crystalline framework heterostructure hybrid composite in the sensing field.

Self-powered molecular imprinted photoelectrochemical sensing platform of sialic acid employing WO3/Bi2S3 photoanode and CuInS2 photocathode

A dual-photoelectrode molecular imprinted photoelectrochemical (PEC) sensor is first built for the determination of sialic acid (SA) without additional energy supply. Specifically, WO₃/Bi₂S₃ heterojunction behaves as a photoanode to provide amplified and stable photocurrent for the PEC sensing platform, which is attributed to the matched energy levels of WO₃ and Bi₂S₃ promoting the electron transfer and improving photoelectric conversion properties. CuInS₂ micro-flowers functionalized by molecularly imprinted polymers (MIPs) are served as photocathode to recognize SA, avoiding the deficiency of high production cost and poor stability from biological enzymes, aptamers, or antigen-antibodies. The inherent deviation between the Fermi level of the photoanode and the photocathode guarantees a spontaneous power supply for the PEC system. Benefiting from the photoanode and recognition elements, the as-fabricated PEC sensing platform has a strong anti-interference ability and high selectivity. Moreover, the PEC sensor displays a wide linear range of 1 nM-100 μM and a low detection limit of 7.1 × 10^-10 M (S/N = 3) based on the relationship between photocurrent signal and SA concentration. Accordingly, this research provides a new and valuable approach to detecting various molecules.

Constructing Netlike Nanosheets of ZnO/BiOCl with Heterojunction as Robust Material for Electrochemical Amine Detection

The electrochemical sensing is a potential method for detection of trace toxic substance. Herein, the heterojunction of netlike ZnO/BiOCl nanosheets was constructed for the enhanced electrochemical detection of ammonia. Cyclic voltammetry and linear sweep voltammetry were used to investigate the electrochemical performance. The results show that the ZnO/BiOCl-modified electrode exhibits higher sensitivity towards ammonia compared with the ZnO and BiOCl-based electrodes, which is ascribed to band structure and fast electron transfer. The high response of 11.8 μA mM^-1 and a low detection limit (LOD) of 0.25 μM are achieved. In addition, the ZnO/BiOCl material exhibits high selectivity, repeatability and stability. The better linear relationship between concentration and current (R² =0.99) is significant for quantitative detection of ammonia, implying that netlike ZnO/BiOCl nanosheets can serve as electrochemical sensing platform for detecting toxic substance. This research provides a strategy for fabricating two-dimensional netlike materials and regulating heterojunctions used for electrochemical application.

Construction of a dual-signal molecularly imprinted photoelectrochemical sensor based on bias potential control for selective sensing of tetracycline

The two signals validate each other to improve the accuracy and sensitivity of the MIP-PEC sensor.

A Fast and Easy Probe Based on CMC/Eu (Ⅲ) Nanocomposites to Detect Acrylamide in Different Food Simulants Migrating from Food-Contacting Paper Materials

The residual acrylamide in food paper packaging can be transferred into water and food, which will cause harmful effects on human beings. In this paper, a rapid and easily available fluorescent probe based on carboxymethyl cellulose (CMC)/Eu (Ⅲ) nanocomposites was designed to detect the residue acrylamide with high sensibility. The probe could respond in 1 min. The concentration of acrylamide was linearly correlated to the fluorescence intensity of the probe at the emission wavelength of 615 nm in the concentration range of 0.1–100 μmol/L. The limit of detection (LOD) of the probe was 0.085 μg/L, which is lower than the guideline value of the European Union, the U.S. EPA, and the WHO. An experiment was performed to simulate the acrylamide migrating from food-contacting paper materials to different foods, including waterborne food, alcohol beverage, acidic food, and greasy food. The recoveries and RSDs of acrylamide in all samples indicated that the CMC/Eu (Ⅲ) fluorescent probe was efficient for acrylamide detection. The possible mechanism of the probe for acrylamide detection involved both dynamically quenching and static quenching by forming of non-fluorescent substances.

Ratiometric Fluorescent Metal-Organic Framework Biosensor for Ultrasensitive Detection of Acrylamide

Acrylamide is a neurotoxin and carcinogen that forms during the thermal processing of food, inflicting irreversible harm to human health. Herein, a ratiometric fluorescence biosensor based on a 6-carboxyfluorescein-labeled aptamer (FAM-ssDNA) and porphyrin metal-organic framework (PCN-224) was developed. PCN-224 exhibits strong adsorption capacity for FAM-ssDNA and also quenches the fluorescence of FAM-ssDNA via fluorescence resonance energy transfer and photoinduced electron transfer. FAM-ssDNA hybridizes with complementary DNA to form double-stranded DNA (FAM-dsDNA), which is liberated from the PCN-224 surface, resulting in fluorescence recovery. However, the intrinsic fluorescence of the ligand remains unchanged. Acrylamide can create an adduct with FAM-ssDNA and inhibit the hybridization of FAM-dsDNA, thus realizing ratiometric sensing of acrylamide. The proposed biosensor displays excellent detection performance from 10 nM∼0.5 mM with a limit of detection of 1.9 nM. In conclusion, a fabricated biosensor was successfully applied to detect acrylamide in thermally processed food, and the results were consistent with those of high-performance liquid chromatography.

A fluorescence biosensor based on double-stranded DNA and a cationic conjugated polymer coupled with exonuclease III for acrylamide detection

As a toxic substance on human health produced in food thermal treatment, simple analytical approaches are highly desired for the detection of acrylamide (ACR) in foods. With the aid of exonuclease III (Exo III), a simple fluorescence sensor was proposed based on carboxyfluorescein-labeled double-stranded DNA (FAM-dsDNA) and a cationic conjugated polymer (PFP). Fluorescence resonance energy transfer (FRET) efficiency between FAM and PFP was changed with and without ACR. When ACR was present, ACR and single-stranded DNA (P1, ssDNA) formed an adduct, allowing free FAM-labeled complementarity strand DNA (P2, FAM-csDNA) to appear in the solution and avoiding the digestion of P2 by Exo III. After the addition of PFP, the interaction of PFP and FAM induced strong FRET. Under optimized conditions, ACR was detected with a limit of detection (LOD) of 0.16 μM. According to this biosensor, a LOD of 1.3 μM in water extract samples was observed with a good recovery rate (95-110 %).

Novel optoelectronic metal organic framework material perylene tetracarboxylate magnesium: preparation and biosensing

The pursuit for improving photoelectrochemical (PEC) performances of organic materials remains an urgent need. Here, we have proposed an envision of the preparation the metal-organic frameworks (MOFs) with arenes to realize high photo-to-current conversion efficiency and excellent PEC performances. Magnesium 3,4,9,10-perylene tetracarboxylic acid metal-organic frameworks (Mg-PTCA MOFs) were synthesized for the first time. The uniformly distributed and regular-shaped Mg-PTCA MOFs showed a much more stable and higher photocurrent than the single PTCA and its derivatives, which confirmed our hypothesis. A regenerated-biosensor was designed for microRNA analysis based on Mg-PTCA MOFs as a novel photoelectric material, target-triggered three-dimensional DNA Scaffold (3D-Sca) as an efficient signal amplifier, and gold nanoclusters (Au NCs) as quencher. The elaborately designed biosensor achieved ultrasensitive detection for miRNA 21 with a dynamic range from 10 aM to 10 pM and a detection limit of 2.8 aM. This biosensor showed good analytical performance in the extracts of different cancer cells, indicating the possibility for early diagnosis, timely staging assessment, and accurate prognostic judgment for diseases. The recommendable performances of Mg-PTCA MOFs highlight the significance of organic MOFs in PEC sensing.

A cellulose-based temperature sensitivity molecular imprinted hydrogel for specific recognition and enrichment of paclitaxel

A microcrystalline cellulose-based temperature sensitivity paclitaxel molecular imprinted hydrogel (MCC-TSMIHs-PTX) was successfully prepared by temperature-sensitive monomer N-isopropylacrylamide, functional monomer 4-vinylpyridine, cross-linking agent N, N'-methylenebisacrylamide and microcrystalline cellulose. They showed imprinting effective responses to the temperature changes. The results of adsorption kinetics, adsorption equilibrium, thermodynamics, selectivity and reusability showed the successful formation of a grafting thermosensitivity hydrogel with higher adsorption capacity and specific recognition. When the temperature reached 308 K, imprinting effect of hydrogel cavities would be most effective and conducive to capture template molecules. When the temperature reached 288 K, the lowest imprinting effect would facilitate the desorption of PTX. Finally, the MCC-TSMIHs-PTX was applied to enrich the paclitaxel in Taxus × media extracts samples, the relative contents of PTX in the samples were increased greatly from 7.23% to 78.32%, indicating the MCC-TSMIHs-PTX was a stable adsorption capacity for efficient separation and enrichment of PTX in Taxus × media extracts.

Nanomaterials Enabled and Bio/Chemical Analytical Sensors for Acrylamide Detection in Thermally Processed Foods: Advances and Outlook

Acrylamide, a food processing contaminant with demonstrated genotoxicity, carcinogenicity, and reproductive toxicity, is largely present in numerous prominent and commonly consumed food products that are produced by thermal processing methods. Food regulatory bodies such as the U.S. Food and Drug Administration (U.S. FDA) and European Union Commission regulations have disseminated various acrylamide mitigation strategies in food processing practices. Hence, in the wake of such food and public health safety efforts, there is a rising demand for economic, rapid, and portable detection and quantification methods for these contaminants. Since conventional quantification techniques like liquid chromatography-mass spectrometry (LC-MS) and gas chromatography-mass spectrometry (GC-MS) methods are expensive and have many drawbacks, sensing platforms with various transduction systems have become an efficient alternative tool for quantifying various target molecules in a wide variety of food samples. Therefore, this present review discusses in detail the state of robust, nanomaterials-based and other bio/chemical sensor fabrication techniques, the sensing mechanism, and the selective qualitative and quantitative measurement of acrylamide in various food materials. The discussed sensors use analytical measurements ranging from diverse and disparate optical, electrochemical, as well as piezoelectric methods. Further, discussions about challenges and also the potential development of the lab-on-chip applications for acrylamide detection and quantification are entailed at the end of this review.