Towards a flexible electrochemical biosensor fabricated from biocompatible Bombyx mori silk

Biocompatible Electronic Skins for Cardiovascular Health Monitoring

Cardiovascular diseases represent a significant threat to the overall well-being of the global population. Continuous monitoring of vital signs related to cardiovascular health is essential for improving daily health management. Currently, there has been remarkable proliferation of technology focused on collecting data related to cardiovascular diseases through daily electronic skin monitoring. However, concerns have arisen regarding potential skin irritation and inflammation due to the necessity for prolonged wear of wearable devices. To ensure comfortable and uninterrupted cardiovascular health monitoring, the concept of biocompatible electronic skin has gained substantial attention. In this review, biocompatible electronic skins for cardiovascular health monitoring are comprehensively summarized and discussed. The recent achievements of biocompatible electronic skin in cardiovascular health monitoring are introduced. Their working principles, fabrication processes, and performances in sensing technologies, materials, and integration systems are highlighted, and comparisons are made with other electronic skins used for cardiovascular monitoring. In addition, the significance of integrating sensing systems and the updating wireless communication for the development of the smart medical field is explored. Finally, the opportunities and challenges for wearable electronic skin are also examined.

Load-bearing columns inspired fabrication of ductile and mechanically enhanced BSA hydrogels

Currently, protein-based hydrogels are widely applied in soft materials, tissue engineering and implantable scaffolds owing to their excellent biocompatibility, and degradability. However, most protein-based hydrogels are soft brittle. In this study, a ductile and mechanically enhanced bovine serum albumin (BSA) hydrogel is fabricated by soaking the a 1-(3-dimethylaminopropyl)-3ethylcarbodiimide hydrochloride/N-hydroxysuccinimide (EDC/NHS) induced BSA hydrogel in (NH4)2SO4 solution. An EDC/NHS coupling reaction induce protein coupling reactions that cause the BSA skeleton to resemble architectural load-bearing walls, protecting the integrity of the hydrogel and preventing collapse. The effects of the BSA and (NH4)2SO4 concentrations on the hydrogel mechanics are evaluated, and the possible strengthening mechanism is discussed. Besides, the highly kosmotropic ions greatly enhance the hydrophobic interaction within BSA gels and dehydration effect and their mechanical properties were significantly enhanced. The various mechanical properties of hydrogels can be regulated over a large window by soaking hydrogels into various ions. And most of them can be washed away, maintaining high biocompatibility of the protein. Importantly, the protein hydrogels prepared by this strategy could also be modified as strain sensors. In a word, this work demonstrates a new, universal method to provide multi-functional, biocompatible, strength enhanced and regulable mechanical pure protein hydrogel, combining the Hofmeister effect with -NH2/-COOH association groups.

Implantable Flexible Sensors for Health Monitoring

Flexible sensors, as a significant component of flexible electronics, have attracted great interest the realms of human-computer interaction and health monitoring due to their high conformability, adjustable sensitivity, and excellent durability. In comparison to wearable sensor-based in vitro health monitoring, the use of implantable flexible sensors (IFSs) for in vivo health monitoring offers more accurate and reliable vital sign information due to their ability to adapt and directly integrate with human tissue. IFSs show tremendous promise in the field of health monitoring, with unique advantages such as robust signal reading capabilities, lightweight design, flexibility, and biocompatibility. Herein, a review of IFSs for vital signs monitoring is detailly provided, highlighting the essential conditions for in vivo applications. As the prerequisites of IFSs, the stretchability and wireless self-powered properties of the sensor are discussed, with a special attention paid to the sensing materials which can maintain prominent biosafety (i.e., biocompatibility, biodegradability, bioresorbability). Furthermore, the applications of IFSs monitoring various parts of the body are described in detail, with a summary in brain monitoring, eye monitoring, and blood monitoring. Finally, the challenges as well as opportunities in the development of next-generation IFSs are presented.

Biomass-derived 2D carbon materials: structure, fabrication, and application in electrochemical sensors

Biomass, a renewable hydrocarbon, is one of the favorable sources of advanced carbon materials owing to its abundant resources and diverse molecular structures. Biomass-based two-dimensional carbon nanomaterials (2D-BC) have attracted extensive attention due to their tunable structures and properties, and have been widely used in the design and fabrication of electrochemical sensing platforms. This review embarks on the thermal conversion process of biomass from different sources and the synthesis strategy of 2D-BC materials. The affinity between 2D-BC structure and properties is emphasized. The recent progress in 2D-BC-based electrochemical sensors for health and environmental monitoring is also presented. Finally, the challenges and future development directions related to such materials are proposed in order to promote their further application in the field of electrochemical sensing.

One-step laser synthesis platinum nanostructured 3D porous graphene: A flexible dual-functional electrochemical biosensor for glucose and pH detection in human perspiration

There has been a recent increase in the demand for wearable sensors for sweat glucose monitoring to facilitate diabetes management in a patient-friendly and non-invasive manner. To address this issue, the key challenge lies in the design of flexible sensors with high conductivity, miniaturized patterning, and environmental friendliness. Herein, we introduce a flexible electrochemical sensing system for glucose and pH detection based on one-step laser-scribed PtNPs nanostructured 3D porous laser-scribed graphene (LSG). The as-prepared nanocomposites can synchronously possess hierarchical porous graphene architectures, whereas PtNPs can significantly enhance their sensitivity and electrocatalytic activity. Benefiting from these advantages, the fabricated Pt-HEC/LSG biosensor exhibited a high sensitivity of 69.64 μA mM^-1 cm^-2 as well as a low limit of detection (LOD) of 0.23 μM at a detection range of 5-3000 μM (covering the glucose range in sweat). Moreover, the pH sensor was functionalized with polyaniline (PANI) on a Pt-HEC/LSG electrode, and it also exhibited high sensitivity (72.4 mV/pH) in the linear range of pH 4-8. The feasibility of the biosensor was confirmed by analyzing human perspiration during physical exercise. This dual-functional electrochemical biosensor displayed excellent performance, including a low detection limit, high selectivity, and great flexibility. These results confirm that the proposed dual-functional flexible electrode and fabrication process are highly promising for application in human sweat-based electrochemical glucose and pH sensors.

Vascularized polypeptide hydrogel modulates macrophage polarization for wound healing

Wound repair involves a sophisticated process that includes angiogenesis, immunoregulation and collagen deposition. However, weak revascularization performance and the lack of biochemical cues to trigger immunomodulatory function currently limit biomaterial applications for skin regeneration and tissue engineering. Herein, we fabricate a new bioactive polypeptide hydrogel (QK-SF) constituted by silk fibroin (SF) and a vascular endothelial growth factor mimetic peptide KLTWQELYQLKYKGI (QK) for tissue regeneration by simultaneously promoting vascularization and macrophage polarization. Our results showed that this QK-SF hydrogel can be prepared via an easy manufacturing process, and exhibited good gel stability and low cytotoxicity to cultured human umbilical vein endothelial cells (HUVECs) via both live/dead and cell counting kit-8 assays. Importantly, this QK-SF hydrogel triggered macrophage polarization from M1 into M2, as exemplified by the enhanced expression of the M2 marker and decreased expression of the M1 marker in RAW264.7 cells. Furthermore, the QK-SF hydrogel showed high capacity for inducing endothelial growth, migration and angiogenesis, which were proved by increased expression of angiogenesis-related genes in HUVECs. Consistent with in vitro findings, in vivo data show that the QK-SF hydrogel promoted M2 polarization, keratinocyte differentiation, and collagen deposition in the mouse skin wound model in immunohistochemistry assay. Furthermore, this QK-SF hydrogel can reduce inflammation, induce angiogenesis and promote wound healing as exemplified by the increased vessel formation and decreased wound area in the mouse skin wound model. Altogether, these results indicate that the bioactive QK-SF hydrogel plays dual functional roles in promoting angiogenesis and immunoregulation for tissue regeneration. STATEMENT OF SIGNIFICANCE: The QK-SF hydrogel plays dual functional roles in promoting angiogenesis and immunoregulation for tissue repair and wound healing. The QK-SF hydrogel can be prepared via an easy manufacturing process, and exhibited good gel stability and low cytotoxicity to cultured HUVECs. The QK-SF hydrogel triggered macrophage polarization from M1 into M2. The QK-SF hydrogel showed high capacity for inducing endothelial growth, migration and angiogenesis. The QK-SF hydrogel promoted M2 polarization, keratinocyte differentiation, and collagen deposition.

Highly Conformal Polymers for Ambulatory Electrophysiological Sensing

Stable ambulatory electrophysiological sensing is widely utilized for smart e-healthcare monitoring, clinical diagnosis of cardiovascular diseases, treatment of neurological diseases, and intelligent human-machine interaction. As the favorable signal interaction platform of electrophysiological sensing, the conformal property of on-skin electrodes is an extremely crucial factor that can affect the stability of long-term ambulatory electrophysiological sensing. From the perspective of materials, to realize conformal contact between electrodes and skin for stable sensing, highly conformal polymers are strongly demanding and attracting ever-growing attention. In this review, we focused on the recent progress of highly conformal polymers for ambulatory electrophysiological sensing, including their synthetic methods, conformal property, and potential applications. Specifically, three main types of highly conformal polymers for stable long-term electrophysiological signals monitoring were proposed, including nature silk fibroin based conformal polymers, marine mussels bio-inspired conformal polymers, and other conformal polymers such as zwitterionic polymers and polyacrylamide. Furthermore, the future challenges and opportunities of preparing highly conformal polymers for on-skin electrodes were also highlighted. This article is protected by copyright. All rights reserved.