Fluorescent paper-based analytical devices for ultra-sensitive dual-type RNA detections and accurate gastric cancer screening

Collaborative CRISPR-Cas System-Enabled Detection of Circulating Circular RNA for Reliable Monitoring of Acute Myocardial Infarction

Acute myocardial infarction (AMI) is one of the major causes of death worldwide, posing significant global health challenges. Circular RNA (circRNA) has recently emerged as a potential diagnostic biomarker for AMI, providing valuable information for timely medical care. In this work, a new electrochemical method for circRNA detection by engineering a collaborative CRISPR-Cas system is developed. This system integrates the unique circRNA-targeting ability with cascade trans-cleavage activities of Cas effectors, using an isothermal primer exchange reaction as the bridge. Using cZNF292, a circulating circRNA biomarker for AMI is identified by this group; as a model, the collaborative CRISPR-Cas system-based method exhibits excellent accuracy and sensitivity with a low detection limit of 2.13 × 10-15 m. Moreover, the method demonstrates a good diagnostic performance for AMI when analyzing whole blood samples. Therefore, the method may provide new insight into the detection of circRNA biomarkers and is expected to have great potential in AMI diagnosis in the future.

Dual response signal CdTe QDs@ZIF-8 with butterfly spectrum for dual-mode fluorescence/colorimetric detection of tetracycline in animal feeds

In this study, a ratiometric fluorescent sensor CdTe QDs@ZIF-8 with butterfly spectra is successfully constructed by in situ encapsulating mercaptopropionic acid-modified CdTe quantum dots in zeolitic imidazolate framework-8 (ZIF-8) with a simple strategy, and used for the detection of tetracycline in fluorescence/smartphone colorimetry dual-mode. ZIF-8 not only reduces the agglomeration of the quantum dots but also surprisingly generates a new green fluorescence signal at 524 nm while the red fluorescence of the CdTe quantum dots at 650 nm quenches when tetracycline is added. The two opposing fluorescence signals create a butterfly-shaped fluorescence spectrum, allowing the sensor to detect tetracycline over a linear range of 0-70 μM with the detection limit (LOD) of 0.0155 μM by using a ratiometric fluorescence technique. What is more, based on the obvious color change of the fluorescent sensor gradually from red to green under UV light, a highly stable point-of-care testing sensor has been developed for on-site detection of tetracycline through color recognition by smartphones, which can be used for real-time detection of this antibiotic in the range of 0-1000 μM with the LOD of 0.0249 μM. This work provides a simple and efficient method for the on-site detection of tetracycline.

The impact of exosomes on bone health: A focus on osteoporosis

Osteoporosis is a widespread chronic condition. Although standard treatments are generally effective, they are frequently constrained by side effects and the risk of developing drug resistance. A promising area of research is the investigation of extracellular vesicles (EVs), including exosomes, microvesicles, and apoptotic bodies, which play a crucial role in bone metabolism. Exosomes, in particular, have shown significant potential in both the diagnosis and treatment of osteoporosis. EVs derived from osteoclasts, osteoblasts, mesenchymal stem cells, and other sources can influence bone metabolism, while exosomes from inflammatory and tumor cells may exacerbate bone loss, highlighting their dual role in osteoporosis pathology. This review offers a comprehensive overview of EV biogenesis, composition, and function in osteoporosis, focusing on their diagnostic and therapeutic potential. We examine the roles of various types of EVs and their cargo-proteins, RNAs, and lipids-in bone metabolism. Additionally, we explore the emerging applications of EVs as biomarkers and therapeutic agents, emphasizing the need for further research to address current challenges and enhance EV-based strategies for managing osteoporosis.

Rolling Circle Amplification-Enabled Ultrasensitive Point-of-Care Test Method for Aflatoxin B1 in the Environment and Food

Aflatoxin B1 (AFB1) contamination poses a fatal risk to human beings and urgently needs highly sensitive detection for environmental monitoring and food safety. However, the existing challenges are the unsatisfied sensitivity of the immunoassay methods and the complex matrix effect. Rolling circle amplification (RCA) is a promising method for nucleic acid isothermal amplification due to its high specificity and sensitivity. Herein, we constructed a general RCA-based point-of-care test method (RCA-POCT). With biotinylated antibodies, streptavidin, and biotinylated RCA primers, we realized the signal transduction and preliminary signal amplification. In this way, the fluorescent signal of the immunocomplex on the microwells was greatly enhanced. Under optimal conditions, we recorded sensitive detection limits for aflatoxin B1 (AFB1) of 1.94, 16.3, and 37.7 fg/mL (femtogram per microliter), and wide linear ranges with 5 × 10-6 to 5, 5 × 10-5 to 5, and 5 × 10-5 to 5 ng/mL in the irrigation water, field soil, and peanut samples, respectively. Satisfactory recovery, specificity, repeatability, and reproducibility were observed. The RCA-POCT was validated by comparing it to the HPLC method. This work provides a general RCA-assisted detection method for AFB1 in the environment and food.

Avalanche-assisted transient optical phenomenon in aggregated toluidine blue dye

Pulse-modulated CW laser heat deposition modulates the darkness or the transparency of an aggregated medium in the high signal optical regimen. A recently reported work found that transient optical responses of molecular aggregates can be different depending on whether the sample is excited with a laser wavelength tuned within the absorption band of the monomer or within the absorption band of the aggregates. The different transient responses were attributed to different dynamic processes during the laser-induced disassembling of the molecular aggregates and may have implications in the field of organic electronics and optical devices, such as optical logical gates, optical power limiters and all-optical switching. In this paper laser beams with wavelengths of 663 nm and 532 nm were used to produce sudden changes in the thermodynamic equilibrium of the aggregation states of the ortho-toluidine blue dye, which allowed to observe the occurrence of the avalanche - mediated transient phenomenon in the laser-induced disassembling of ortho-toluidine blue (TBO) aggregates. A double exponential model was adjusted to the registered transient data. The obtained values for the fast components of the transient time responses of ortho-toluidine blue dye, for the studied concentrations, ranged from ∼ 6.5 to 9.5 ms at 532 nm, and from ∼ 43 to 48 ms at 663 nm. A single beam experiment was employed to evaluate the performance of the ortho-toluidine blue dye in a beam power-damping device, driven by the simultaneous and cooperative actions of the laser induced disassembling of aggregated dye units and the thermal lensing effect. It was found that the phenomenon of laser-induced dye disassembling of TBO, acting cooperatively with the thermal lensing effect, damps the laser beam power faster than the thermal lensing phenomenon alone. In addition, the results showed that the speed of the laser beam power-damping is dye dependent.

Recent Uses of Paper Microfluidics in Isothermal Nucleic Acid Amplification Tests

Isothermal nucleic acid amplification tests have recently gained popularity over polymerase chain reaction (PCR), as they only require a constant temperature and significantly simplify nucleic acid amplification. Recently, numerous attempts have been made to incorporate paper microfluidics into these isothermal amplification tests. Paper microfluidics (including lateral flow strips) have been used to extract nucleic acids, amplify the target gene, and detect amplified products, all toward automating the process. We investigated the literature from 2020 to the present, i.e., since the onset of the COVID-19 pandemic, during which a significant surge in isothermal amplification tests has been observed. Paper microfluidic detection has been used extensively for recombinase polymerase amplification (RPA) and its related methods, along with loop-mediated isothermal amplification (LAMP) and rolling circle amplification (RCA). Detection was conducted primarily with colorimetric and fluorometric methods, although a few publications demonstrated flow distance- and surface-enhanced Raman spectroscopic (SERS)-based detection. A good number of publications could be found that demonstrated both amplification and detection on paper microfluidic platforms. A small number of publications could be found that showed extraction or all three procedures (i.e., fully integrated systems) on paper microfluidic platforms, necessitating the need for future work.

Functionalized cellulose nanofibrils based supramolecular system-assisted molding enabled strong, antibacterial chitosan bioplastics

Bioplastics are considered as potential alternatives to non-renewable and non-biodegradable petroleum-based plastics. Inspired by ionic and amphiphilic properties of mussel protein, we proposed a versatile and facile strategy for the fabrication of a high-performance chitosan (CS) composite film. This technique incorporates a cationic hyperbranched polyamide (QHB) and a supramolecular system based on the lignosulphonate (LS)-functionalized cellulose nanofibrils (CNF) (LS@CNF) hybrids. The cationic QHB was synthesized by a one-step process from hyperbranched polyamide and quaternary ammonium salt. Meanwhile, the functional LS@CNF hybrids act as a well-dispersed and rigid cross-linked domain in CS matrix. Owing to the interconnected hyperbranched and enhanced supramolecular network, the toughness and tensile strength of the CS/QHB/LS@CNF film simultaneously increased to 19.1 MJ/m³ and 50.4 MPa, 170.2 % and 72.6 % higher than the pristine CS film. Additionally, the functional QHB/LS@CNF hybrids endow the films with superior antibacterial activity, water resistance, UV shielding, and thermal stability. This bioinspired strategy provides a novel and sustainable method for the production of multifunctional CS films.

Development of an Au nanoclusters based activatable nanoprobe for NIR-II fluorescence imaging of gastric acid

Gastric acid is an important functional substance secreted by the stomach of the living organisms, reflecting the gastric physiological condition. The sensing of gastric acid in vivo is of great significance for evaluation of gastric function, diagnosis and treatment of gastric diseases and maintenance of organism health but remains challenging due to the harsh acid and digestive environment of stomach. This study developed an activatable nanoprobe based on Au nanoclusters (Au NCs) for sensitive and real-time noninvasive near-infrared II (NIR-II) fluorescence imaging detection of gastric acid in vivo for the first time. The Au NCs were encapsulated by polydopamine to have enhanced NIR-II luminescence and high stability and combined with methylene blue to possess the pH responsiveness for gastric acid imaging. The developed nanoprobe could not only monitor gastric acid secretion in vivo but also imaging the changes of gastric acid caused by feeding, acid-inhibition drugs and gastric ulcer disease. This study provides a promising avenue for the improvement of the application performance of Au NCs and imaging analysis of gastric acid and related gastric diseases.

Semiconductor/Carbon Quantum Dot-based Hue Recognition Strategy for Point of Need Testing: A Review

The requirement to establish novel methods for visual detection is attracting attention in many application fields of analytical chemistry, such as, healthcare, environment, agriculture, and food. The research around subjects like "point-of-need", "hue recognition", "paper-based sensor", "fluorescent sensor", etc. has been always aimed at the opportunity to manufacture convenient and fast-response devices to be used by non-specialists. It is possible to achieve economic rationality and technical simplicity for optical sensing toward target analytes through introduction of fluorescent semiconductor/carbon quantum dot (QD) and paper-based substrates. In this Review, the mechanisms of anthropic visual recognition and fluorescent visual assays, characteristics of semiconductor/carbon QDs and ratiometric fluorescence test paper, and strategies of semiconductor/carbon QD-based hue recognition are described. We cover latest progress in the development and application of point-of-need sensors for visual detection, which is based on a semiconductor/carbon quantum dot-based hue recognition strategy generated by ratiometric fluorescence technology.

A fluorescent lateral flow immunoassay based on CdSe/CdS/ZnS quantum dots for sensitive detection of olaquindox in feedstuff

A portable fluorescence immunosensor based on the CdSe/CdS/ZnS quantum dots (QDs) with multiple-shell structure was fabricated for the precise quantification of olaquindox (OLA). The QDs labeled anti-OLA antibody used as bioprobe played an important role in the design and preparation of a lateral flow test strip. Due to the strong fluorescent intensity of QDs, the sensitivity is greatly improved. The quantitative results were obtained using a fluorescent strip scan reader within 8 min, and the calculated limit of detection for OLA at 0.12 µg/kg, which was 2.7 times more sensitive than that of the conventional colloidal gold-based strips method. Acceptable recovery of 85.0%-95.5% was obtained by the spiked samples. This newly established QDs-based strip immunoassay method is suitable for the on-site detection and rapid initial screening of OLA in swine feedstuff, and is potentially applied for the detection of other veterinary drugs to ensure food safety.

Facile Microembossing Process for Microchannel Fabrication for Nanocellulose-Paper-Based Microfluidics

Nanofibrillated cellulose paper (nanopaper) has gained growing interest as one promising substrate material for paper-based microfluidics, thanks to its ultrasmooth surface, high optical transparency, uniform nanofiber matrix with nanoscale porosity, and tunable chemical properties. Recently, research on nanopaper-based microfluidics has quickly advanced; however, the current technique of patterning microchannels on nanopaper (i.e., 3D printing, spray coating, or manual cutting and sticking), that is fundamental for application development, still has some limitations, such as ease-of-contamination, and more importantly, only enabling millimeter-scale channels. This paper reports a facile process that leverages the simple operations of microembossing with the convenient plastic micro-molds, for the first time, patterning nanopaper microchannels downing to 200 μm, which is 4 times better than the existing methods and is time-saving (<45 mins). We also optimized the patterning parameters and provided one quick look-up table as the guideline for application developments. As proof-of-concept, we first demonstrated two fundamental microfluidic devices on nanopaper, the laminar-mixer and droplet generator, and two functional nanopaper-based analytical devices (NanoPADs) for glucose and Rhodamine B (RhB) sensing based on optical colorimetry and surface-enhanced Raman spectroscopy, respectively. The two NanoPADs showed outstanding performance with low limits of detection (2 mM for glucose and 19fM for RhB), which are 1.25× and 500× fold improvement compared to the previously reported values. This can be attributed to our newly developed highly accurate microchannel patterning process that enables high integration and fine-tunability of the NanoPADs along with the superior optical properties of nanopaper.

Carbon-Based Fluorescent Nano-Biosensors for the Detection of Cell-Free Circulating MicroRNAs

Currently, non-communicable diseases (NCDs) have emerged as potential risks for humans due to adopting a sedentary lifestyle and inaccurate diagnoses. The early detection of NCDs using point-of-care technologies significantly decreases the burden and will be poised to transform clinical intervention and healthcare provision. An imbalance in the levels of circulating cell-free microRNAs (ccf-miRNA) has manifested in NCDs, which are passively released into the bloodstream or actively produced from cells, improving the efficacy of disease screening and providing enormous sensing potential. The effective sensing of ccf-miRNA continues to be a significant technical challenge, even though sophisticated equipment is needed to analyze readouts and expression patterns. Nanomaterials have come to light as a potential solution as they provide significant advantages over other widely used diagnostic techniques to measure miRNAs. Particularly, CNDs-based fluorescence nano-biosensors are of great interest. Owing to the excellent fluorescence characteristics of CNDs, developing such sensors for ccf-microRNAs has been much more accessible. Here, we have critically examined recent advancements in fluorescence-based CNDs biosensors, including tools and techniques used for manufacturing these biosensors. Green synthesis methods for scaling up high-quality, fluorescent CNDs from a natural source are discussed. The various surface modifications that help attach biomolecules to CNDs utilizing covalent conjugation techniques for multiple applications, including self-assembly, sensing, and imaging, are analyzed. The current review will be of particular interest to researchers interested in fluorescence-based biosensors, materials chemistry, nanomedicine, and related fields, as we focus on CNDs-based nano-biosensors for ccf-miRNAs detection applications in the medical field.

A review on computer-aided chemogenomics and drug repositioning for rational COVID-19 drug discovery

Application of materials capable of energy harvesting to increase the efficiency and environmental adaptability is sometimes reflected in the ability of discovery of some traces in an environment-either experimentally or computationally-to enlarge practical application window. The emergence of computational methods, particularly computer-aided drug discovery (CADD), provides ample opportunities for the rapid discovery and development of unprecedented drugs. The expensive and time-consuming process of traditional drug discovery is no longer feasible, for nowadays the identification of potential drug candidates is much easier for therapeutic targets through elaborate in silico approaches, allowing the prediction of the toxicity of drugs, such as drug repositioning (DR) and chemical genomics (chemogenomics). Coronaviruses (CoVs) are cross-species viruses that are able to spread expeditiously from the into new host species, which in turn cause epidemic diseases. In this sense, this review furnishes an outline of computational strategies and their applications in drug discovery. A special focus is placed on chemogenomics and DR as unique and emerging system-based disciplines on CoV drug and target discovery to model protein networks against a library of compounds. Furthermore, to demonstrate the special advantages of CADD methods in rapidly finding a drug for this deadly virus, numerous examples of the recent achievements grounded on molecular docking, chemogenomics, and DR are reported, analyzed, and interpreted in detail. It is believed that the outcome of this review assists developers of energy harvesting materials and systems for detection of future unexpected kinds of CoVs or other variants.

CaZnO-based nanoghosts for the detection of ssDNA, pCRISPR and recombinant SARS-CoV-2 spike antigen and targeted delivery of doxorubicin

Overexpression of proteins/antigens and other gene-related sequences in the bodies could lead to significant mutations and refractory diseases. Detection and identification of assorted trace concentrations of such proteins/antigens and/or gene-related sequences remain challenging, affecting different pathogens and making viruses stronger. Correspondingly, coronavirus (SARS-CoV-2) mutations/alterations and spread could lead to overexpression of ssDNA and the related antigens in the population and brisk activity in gene-editing technologies in the treatment/detection may lead to the presence of pCRISPR in the blood. Therefore, the detection and evaluation of their trace concentrations are of critical importance. CaZnO-based nanoghosts (NGs) were synthesized with the assistance of a high-gravity technique at a 1,800 MHz field, capitalizing on the use of Rosmarinus officinalis leaf extract as the templating agent. A complete chemical, physical and biological investigation revealed that the synthesized NGs presented similar morphological features to the mesenchymal stem cells (MSCs), resulting in excellent biocompatibility, interaction with ssDNA- and/or pCRISPR-surface, through various chemical and physical mechanisms. This comprise the unprecedented synthesis of a fully inorganic nanostructure with behavior that is similar to MSCs. Furthermore, the endowed exceptional ability of inorganic NGs for detective sensing/folding of ssDNA and pCRISPR and recombinant SARS-CoV-2 spike antigen (RSCSA), along with in-situ hydrogen peroxide detection on the HEK-293 and HeLa cell lines, was discerned. On average, they displayed a high drug loading capacity of 55%, and the acceptable internalizations inside the HT-29 cell lines affirmed the anticipated MSCs-like behavior of these inorganic-NGs.

The Role of Extracellular Vesicles in Osteoporosis: A Scoping Review

As an insidious metabolic bone disease, osteoporosis plagues the world, with high incidence rates. Patients with osteoporosis are prone to falls and becoming disabled, and their cone fractures and hip fractures are very serious, so the diagnosis and treatment of osteoporosis is very urgent. Extracellular vesicles (EVs) are particles secreted from cells to the outside of the cell and they are wrapped in a bilayer of phospholipids. According to the size of the particles, they can be divided into three categories, namely exosomes, microvesicles, and apoptotic bodies. The diameter of exosomes is 30–150 nm, the diameter of microvesicles is 100–1000 nm, and the diameter of apoptotic bodies is about 50–5000 nm. EVs play an important role in various biological process and diseases including osteoporosis. In this review, the role of EVs in osteoporosis is systematically reviewed and some insights for the prevention and treatment of osteoporosis are provided.