Rapid detection of miRNA via development of consecutive adenines (polyA)-based electrochemical biosensors

WS2 nanosheets-based electrochemical biosensor for highly sensitive detection of tumor marker miRNA-4484

In this paper, a few-layer WS2 nanosheets-based electrochemical biosensor was fabricated for the highly sensitive detection of breast cancer tumor marker miRNA-4484. Firstly, few-layer WS2 nanosheets were prepared by shear stripping and characterized by SEM, TEM, AFM and UV spectrophotometer. After modification of few-layer WS2 nanosheets on the electrode surface, the miRNA probe was fixed on the few-layer WS2 nanosheets by polycytosine (PolyC). Then short-chain miRNA containing PolyC was used as the blocking agent to close the excess active sites on the surface of WS2 nanosheets to complete the fabrication of the sensor biosensing interface. Finally, the current changes caused by the specific binding of miRNA-4484 to the probe were analyzed by differential pulse voltammetry (DPV). The results showed that the sensor had a good linear relationship for the detection of miRNA-4484 in the concentration range of 1 aM-100 fM, and the detection limit was as low as 1.61 aM. In addition, the electrochemical sensor had excellent selectivity, stability and reproducibility. The artificial sample tests indicated that the developed biosensors have the potential for clinical application in the future.

A multi-channel electrochemical biosensor based on polyadenine tetrahedra for the detection of multiple drug resistance genes

Antimicrobial resistance poses a serious threat to human health due to the high morbidity and mortality caused by drug-resistant microbial infections. Therefore, the development of rapid, sensitive and selective identification methods is key to improving the survival rate of patients. In this paper, a sandwich-type electrochemical DNA biosensor based on a polyadenine-DNA tetrahedron probe was constructed. The key experimental conditions were optimized, including the length of polyadenine, the concentration of the polyadenine DNA tetrahedron, the concentration of the signal probe and the hybridization time. At the same time, poly-avidin-HRP80 was used to enhance the electrochemical detection signal. Finally, excellent biosensor performance was achieved, and the detection limit for the synthetic DNA target was as low as 1 fM. In addition, we verified the practicability of the system by analyzing E. coli with the MCR-1 plasmid and realized multi-channel detection of the drug resistance genes MCR-1, blaNDM, blaKPC and blaOXA. With the ideal electrochemical interface, the polyA-based biosensor exhibits excellent stability, which provides powerful technical support for the rapid detection of antibiotic-resistant strains in the field.

Catalytic Assembly of DNAzyme Integrates with Primer Exchange Reaction (CDiPER) for Highly Sensitive Detection of MicroRNA

MicroRNAs (miRNAs) have significant regulatory functions in the modulation of gene expression, making them essential biomarkers for the diagnosis and prognosis of diseases. Nevertheless, the identification of miRNA poses significant difficulty in terms of its low abundance, necessitating sensitive and reliable approaches. Herein, we develop a simple approach, termed Catalytic assembly of DNAzyme integrates with Primer Exchange Reaction (CDiPER), for reliable and sensitive miRNA detection through the target recognition-triggered DNAzyme assembly and primer exchange reaction (PER) strategy. In this method, target miRNA can precisely bind with a specifically designed hairpin probe (H probe) to induce the conformation changes of the H probe, releasing DNAzyme sections to activate the PER process for signal amplification and fluorescence signal production. The established method displays a high dynamic range of over 6 orders of magnitude and a low detection limit of 312 aM. The created method has a number of unique advantages, such as (i) a better sensitivity than existing systems using PER for signal amplification as a result of its integration with the target recognition-triggered DNAzyme assembly and (ii) streamlined operating procedures. Further, the technology was used to detect the expression of miRNA in collected clinical samples from diabetes mellitus patients, revealing that miRNA was decreased in patients and demonstrating the significant clinical promise of the method.

An Alternating Current Electroosmotic Flow-Based Ultrasensitive Electrochemiluminescence Microfluidic System for Ultrafast Monitoring, Detection of Proteins/miRNAs in Unprocessed Samples

Early diagnosis of acute diseases is restricted by the sensitivity and complex process of sample treatment. Here, an ultrasensitive, rapid, and portable electrochemiluminescence-microfluidic (ECL-M) system is described via sandwich-type immunoassay and surface plasmonic resonance (SPR) assay. Using a sandwich immunoreaction approach, the ECL-M system employs cardiac troponin-I antigen (cTnI) as a detection model with a Ru@SiO2 NPs labeled antibody as the signal probe. For miR-499-5p detection, gold nanoparticles generate SPR effects to enhance Ru(bpy)3 2+ ECL signals. The system based on alternating current (AC) electroosmotic flow achieves an LOD of 2 fg mL-1 for cTnI in 5 min and 10 aM for miRNAs in 10 min at room temperature. The point-of-care testing (POCT) device demonstrated 100% sensitivity and 98% specificity for cTnI detection in 123 clinical serum samples. For miR-499-5p, it exhibited 100% sensitivity and 97% specificity in 55 clinical serum samples. Continuous monitoring of these biomarkers in rats' saliva, urine, and interstitial fluid samples for 48 hours revealed observations rarely documented in biotic fluids. The ECL-M POCT device stands as a top-performing system for ECL analysis, offering immense potential for ultrasensitive, rapid, highly accurate, and facile detection and monitoring of acute diseases in POC settings.

A Graphene Oxide-based Assay for Sensitive Osteonecrosis of the Femoral Head (ONFH) related microRNA Detection via Exonuclease-III Assisted Dual Signal Cycle

Accurate detection of circulating microRNAs (miRNAs) plays a vital role in the diagnosis of various diseases. The current miRNA detection methods, however, are widely criticized for their low sensitivity and excessive background signal. Herein, we propose a graphene oxide (GO) based fluorescent biosensor for sensitive and reliable miRNA analysis with a low background signal by utilizing exonuclease III (Exo III)-assisted target recycling and hybridization chain reaction (HCR). To initiate Exo-III-assisted dual signal cycles, a hairpin DNA probe (H probe) was developed for selective miRNA binding. Dye quenching occurred when carboxyfluorescein (FAM)-labeled hairpins (HP1 and HP1) were unable to bind to their intended target and instead adsorb onto the surface of GO via p-stacking interactions. Exo III sequentially cleaved the 3'-strand of the H probe and the S probe upon attachment of the target miRNA, resulting in the release of the miRNA and the autonomous production of a "g" sequence. The released target miRNA then hybridized with a second H probe and progressed to the subsequent reaction phase. With the help of the HP1 and HP2 probes, a lengthy dsDNA product was produced when the "g" sequence triggered HCR. The dsDNA product was not absorbed by GO, and the material instead fluoresced brightly. As a result, the amount of miRNA of interest was measured. With a LOD of only 5.6 fM, this bioassay demonstrated excellent selectivity and great sensitivity.

miRNA Detection for Prostate Cancer Diagnosis by miRoll-Cas: miRNA Rolling Circle Transcription for CRISPR-Cas Assay

Micro-RNA (miRNA) emerges as a promising type of biomarker for cancer diagnosis. There is an urgent need for developing rapid, convenient, and precise miRNA detection methods that may be conducted with limited laboratory facilities, especially in underdeveloped areas. Herein, we developed a miRNA detection method termed miRoll-Cas, where miRNA is first amplified by rolling circle transcription and then subject to CRISPR-Cas13a assay. Using miRoll-Cas, we realized the sensitive detection of multiple cancer-relevant miRNA markers (miR21, miR141, and Let7b) and specifically identified other variants of the Let7 family, which can accurately discriminate prostate cancer patients from healthy people. We envision that miRoll-Cas may be readily translated to clinical applications in the diagnosis of a variety of diseases beyond cancer.

Bidirectional motivated bimodal isothermal strand displacement amplifier with a table tennis-like movement for the ultrasensitive fluorescent and colorimetric detection of depression-related microRNA

An increasing number of studies have highlighted the potential of microRNAs (miRNAs) as physiological indicators of major depressive disorder (MDD). Herein, we developed a bidirectional-motivated bimodal isothermal strand displacement amplifier (BB-ISDA) for the ultrasensitive fluorescent and colorimetric detection of MDD-related miRNA-132. In the BB-ISDA system, a pair of functionalized hairpin probes (HP1 and HP2) with nicking recognition sites are designed to recognize target miRNA. The recognition of target miRNA by HP1 (or HP2) generates copious numbers of nicked triggers by HP1 (or HP2)-based ISDA to recognize HP2 (or HP1) by autonomous strand polymerization, cleavage, and displacement, which in turn induces the subsequent generation of copious numbers of nicked G-quadruplex triggers by HP2 (or HP1)-based ISDA to recognize HP1 (or HP2) along a same line. After many cycles, this bidirectional motivated table-tennis-like movement amplifies the fluorescent signal from HP1 and the colorimetric signal from HP2, simultaneously. The dual-signal output pattern was cross-validated for sensing miRNA-132. Each of the detection modal shows the capability for qualitative and quantitative detection of miRNA-132 with high sensitivity and specificity. The adaptability of the bimodal mechanism was verified via the detection of target miRNA-132 from clinical human blood samples. We envision that this BB-ISDA with dual-signal output for accurate and reliable analysis of miRNA is promising for the molecular diagnosis of human mental diseases.

AuNPs/graphdiyne self-powered sensing platform for sensitive detection of microRNA with DNAzyme walker for signal amplification

A novel self-powered biosensor is engineered by the integration of DNAzyme walker and AuNPs/graphdiyne biosensing interface, realizing sensitive detection of target microRNA. The cleverly constructed DNAzyme walker with outstanding signal transduction ability to obtain an amplified signal response. In addition, the AuNPs/graphdiyne significantly improves electron transport speed of biosensing interface for improving the sensitivity of biosensor. A dynamic linear range of 0.05 fM-10 pM with a low detection limit of 0.015 fM (S/N = 3) is obtained by utilizing the self-powered biosensor. Meanwhile, the developed self-powered biosensor is capable of assaying miRNA-21 in human serum samples with satisfactory recoveries. This strategy provides a valid method for the sensitive microRNA detection, and shows great potential in point-care detection of tumor biomarker.

A DNA walker triggered isothermal amplification method based on freezing construction of AuNP probes and its application in ricin detection

DNA molecular machines are widely used in the fields of biosensors and biological detection. Among them, DNA walkers have attracted much attention due to their simple design and controllability. Herein, we attempt to develop a DNA walker triggered exponential amplification method and explore its application. The AuNP probes in the DNA walker are constructed by a freezing technology, instead of the time-consuming and complex synthesis process of the traditional method. Meanwhile, after the "recognition-cleavage-relative motion" cycle of this DNA walker reaction, the exponential amplification reaction is initiated, and leads to the fluorescence recovery of the molecular beacon. Taking ricin as a target, this new method shows a limit of detection of 2.25 pM by selecting aptamers with strong binding affinity, and exhibits a wide detection range, satisfactory specificity, and excellent stability in practical application. Therefore, our method provides a universal sensing platform and has great prospects in the fields of biosensors, food safety detection, and clinical diagnostics.

Ultrasensitive CRISPR/Cas13a-Mediated Photoelectrochemical Biosensors for Specific and Direct Assay of miRNA-21

Sensitive and specific assay of microRNAs (miRNAs) is beneficial to early disease screening. Herein, we for the first time proposed clustered regularly interspaced short palindromic repeats (CRISPR)/Cas13a-mediated photoelectrochemical biosensors for the direct assay of miRNA-21. In this study, compared with traditional nucleic acid-based signal amplification strategies, the CRISPR/Cas13a system can greatly improve the specificity and sensitivity of target determination due to its accurate recognition and high-efficient trans-cleavage capability without complex nucleic acid sequence design. Moreover, compared with the CRISPR/Cas12a-based biosensing platform, the developed CRISPR/Cas13a-mediated biosensor can directly detect RNA targets without signal transduction from RNA to DNA, thereby avoiding signal leakage and distortion. Generally, the proposed biosensor reveals excellent analysis capability with a wider linear range from 1 fM to 5 nM and a lower detection limit of 1 fM. Additionally, it also shows satisfactory stability in the detection of human serum samples and cell lysates, manifesting that it has great application prospects in the areas of early disease diagnosis and biomedical research.

Recent strategies for electrochemical sensing detection of miRNAs in lung cancer

MicroRNAs (miRNAs) associated with lung cancer are diversifying. MiR-21, Let-7, and miR-141 are common diagnostic targets. Some new lung cancer miRNAs, such as miR-25, miR-145, and miR-126, have received increasing attention. Although various techniques are available for the analysis of lung cancer miRNAs, electrochemistry has been recognized for its high sensitivity, low cost, and rapid response. However, how to realize the signal amplification is one of the most important contents in the design of electrochemical biosensors. Herein, we mainly introduce the amplification strategy based on enzyme-free amplification and signal conversion, including non-linear HCR, catalytic hairpin assembly (CHA), electrochemiluminescence (ECL), and Faraday cage. Furthermore, new progress has emerged in the fields of nanomaterials, low oxidation potential, and simultaneous detection of multiple targets. Finally, we summarize some new challenges that electrochemical techniques may encounter in the future, such as improving single-base discrimination ability, shortening electrochemical detection time, and providing real body fluid samples assay.

Zinc-Air Battery-Based Self-Powered Sensor with High Output Power for Ultrasensitive MicroRNA let-7a Detection in Cancer Cells

Self-powered sensors do not require a power supply and are easy to miniaturize, which have potential for constructing wearable, portable, and real-time detection devices. However, it is challenging for the detection of low abundant targets due to the low output power density of fuel cells and much interference of complex biological environment. Herein, a new kind of photocatalytic zinc-air battery-based self-powered electrochemical sensor (ZAB-SPES) was constructed for the detection of microRNA let-7a (miRNA let-7a) by combining magnetic nanobeads (MBs) with a metal-organic framework loaded with glucose oxidase (MOFs@GOX). Poly(1,4-di(2-thienyl))benzene (PDTB) was used as the photocathode material, and the proposed ZAB-SPES had a high power density of 22.8 μW/cm², which was 2-3-fold of commonly used photofuel cells. MBs can capture and separate miRNA from complex samples quickly with a high separation efficiency of 99% within 60 s. The competitive reaction of oxygen reduction reaction between PDTB and MOFs@GOX would change the output power density of the ZAB-SPES. Based on the relationship between output power density and target concentration, the ZAB-SPES realized ultrasensitive detection of miRNA let-7a with a detection limit down to 1.38 fM. Furthermore, the successful detection of miRNA let-7a in A549 cancer cells indicated the great prospects of ZAB-SPES in clinical analysis and early diagnosis of cancers.

A rational design of a cascaded DNA circuit for nanoparticle assembly and its application in the discrimination of single-base changes

In the field of dynamic DNA nanotechnology, a designable DNA assembly circuit based on the toehold-mediated strand displacement reaction has demonstrated its ability to program the self-assembly of nanoparticles. However, the laborious work for the modification of nanoparticles with oligonucleotides, the long assembly time, and the circuit leakage prevent its further and scalable applications. To this end, cascaded circuits composed of two recycling circles are rationally designed in this study. Through the pre-initiation of the autonomous reaction, nanoparticles as sensing elements and no additionally exposed bases on the substrate hybridized with fuel strand, the real assembly time and signal leakage for diagnostic application can be effectively reduced and eliminated, thus offering a promising methodology for future point-of-care testing.

Kinetics of Isothermal Dumbbell Exponential Amplification: Effects of Mix Composition on LAMP and Its Derivatives

Loop-mediated isothermal amplification (LAMP) is an exponential amplification method of DNA strands that is more and more used for its high performances. Thanks to its high sensitivity and selectivity, LAMP found numerous applications from the detection of pathogens or viruses through their genome amplification to its incorporation as an amplification strategy in protein or miRNA biomarker quantification. The LAMP method is composed of two stages: the first one consists in the transformation of the DNA strands into dumbbell structures formed of two stems and loops thanks to four primers; then, in the second stage, only two primers are required to amplify the dumbbells exponentially in numerous hairpins of increasing lengths. In this paper, we propose a theoretical framework to analyze the kinetics of the second stage of LAMP, the isothermal dumbbell exponential amplification (IDEA) as function of the physico-chemical parameters of the amplification reaction. Dedicated experiments validate the models. We believe these results may help the optimization of LAMP performances by reducing the number of experiments necessary to find the best parameters.

Ultrasensitive CRISPR/Cas12a-Driven SERS Biosensor for On-Site Nucleic Acid Detection and Its Application to Milk Authenticity Testing

An ultrasensitive surface-enhanced Raman scattering (SERS) biosensor driven by CRISPR/Cas12a was proposed for on-site nucleic acid detection. We tactfully modified single-strand DNA (ssDNA) with a target-responsive Prussian blue (PB) nanolabel to form a probe and fastened it in the microplate. Attributed to the specific base pairing and highly efficient trans-cleavage ability of the CRISPR/Cas12a effector, precise target DNA recognition and signal amplification can be achieved, respectively. In the presence of target DNA, trans-cleavage towards the probe was activated, leading to the release of a certain number of PB nanoparticles (NPs). Then, these free PB NPs would be removed. Under alkali treatment, the breakdown of the remaining PB NPs in the microplate was triggered, producing massive ferricyanide anions (Fe(CN)₆^4-), which could exhibit a unique characteristic Raman peak that was located in the "biological Raman-silent region". By mixing the alkali-treated solution with the SERS substrate, Au@Ag core-shell NP, the concentration of the target DNA was finally exhibited as SERS signals with undisturbed background, which can be detected by a portable Raman spectrometer. Importantly, this strategy could display an ultralow detection limit of 224 aM for target DNA. Furthermore, by targeting cow milk as the adulterated ingredient in goat milk, the proposed biosensor was successfully applied to milk authenticity detection.

Triblock probe-polyA-probe electrochemical interfacial engineering for the sensitive analysis of RNAi plants

RNA interference (RNAi) is under fast development in agriculture and brings new challenge for GMO analysis. We developed a electrochemical biosensor for the analysis of GM maize samples based on a polyA-DNA capturing probe. Ultrasensitive detection of 10 fM RNA was realized.