Optothermophoretic flipping method for biomolecule interaction enhancement

Dynamic Addressing Molecular Robot (DAMR): An Effective and Efficient Trial-and-Error Approach for the Analysis of Single Nucleotide Polymorphisms

Accurate and efficient molecular recognition plays a crucial role in the fields of molecular detection and diagnostics. Conventional trial-and-error-based molecular recognition approaches have always been challenged in distinguishing minimal differences between targets and non-targets, such as single nucleotide polymorphisms (SNPs) of oligonucleotides. To address these challenges, here, a novel concept of dynamic addressing analysis is proposed. In this concept, by dissecting the regions of the target and creating a corresponding recognizer, it is possible to eliminate the inaccuracy and inefficiency of recognition. To achieve this concept, a Dynamic Addressing Molecular Robot (DAMR), a DNA-based dynamic addressing device is developed which is capable of dynamically locating targets. DAMR is designed to first bind to the conserved region of the target while addressing the specific region dynamically until accurate recognition is achieved. DAMR has provided an approach for analyzing low-resolution targets and has been used for analyzing SNP of miR-196a2 in both cell and serum samples, which has opened new avenues for effective and efficient molecular recognition.

Photothermal Conversion of the Oleophilic PVDF/Ti3C2Tx Porous Foam Enables Non-Aqueous Liquid System Applicable Actuator

Various physical and chemical reaction processes occur in non-aqueous liquid systems, particularly in oil phase systems. Therefore, achieving efficient, accurate, controllable, and cost-effective movement and transfer of substances in the oil phase is crucial. Liquid-phase photothermal actuators (LPAs) are commonly used for material transport in liquid-phase systems due to their remote operability and precise control. However, existing LPAs typically rely on materials like hydrogels and flexible polymers, commonly unsuitable for non-aqueous liquids. Herein, a 3D porous poly(vinylidene fluoride) (PVDF)/Ti3C2Tx actuator is developed using a solvent displacement method. It demonstrates directional movement and controlled material transport in non-aqueous liquid systems. When subject to infrared light irradiation (2.0 W cm-2), the actuator achieves motion velocities of 7.3 and 6 mm s-1 vertically and horizontally, respectively. The actuator's controllable motion capability is primarily attributed to the foam's oil-wettable properties, 3D porous oil transport network, and the excellent photothermal conversion performance of Ti3C2Tx, facilitating thermal diffusion and the Marangoni effect. Apart from multidimensional directions, the actuator enables material delivery and obstacle avoidance by transporting and releasing target objects to a predetermined position. Hence, the developed controllable actuator offers a viable solution for effective motion control and material handling in non-aqueous liquid environments.

Advancing MicroRNA Detection: Enhanced Biotin-Streptavidin Dual-Mode Phase Imaging Surface Plasmon Resonance Aptasensor

MicroRNAs (miRNAs) are novel tumor biomarkers owing to their important physiological functions in cell communication and the progression of multiple diseases. Due to the small molecular weight, short sequence length, and low concentration levels of miRNA, miRNA detection presents substantial challenges, requiring the advancement of more refined and sensitive techniques. There is an urgent demand for the development of a rapid, user-friendly, and sensitive miRNA analysis method. Here, we developed an enhanced biotin-streptavidin dual-mode phase imaging surface plasmon resonance (PI-SPR) aptasensor for sensitive and rapid detection of miRNA. Initially, we evaluated the linear sensing range for miRNA detection across two distinct sensing modalities and investigated the physical factors that influence the sensing signal in the aptamer-miRNA interaction within the PI-SPR aptasensor. Then, an enhanced biotin-streptavidin amplification strategy was introduced in the PI-SPR aptasensor, which effectively reduced the nonspecific adsorption by 20% and improved the limit of detection by 548 times. Furthermore, we have produced three types of tumor marker chips, which utilize the rapid sensing mode (less than 2 min) of PI-SPR aptasensor to achieve simultaneous detection of multiple miRNA markers in the serum from clinical cancer patients. This work not only developed a new approach to detect miRNA in different application scenarios but also provided a new reference for the application of the biotin-streptavidin amplification system in the detection of other small biomolecules.

Coffee Ring Effect Enhanced Surface Plasmon Resonance Imaging Biosensor via 2-λ Fitting Detection Method

SPR biosensors have been extensively used for investigating protein-protein interactions. However, in conventional surface plasmon resonance (SPR) biosensors, detection is limited by the Brownian-motion-governed diffusion process of sample molecules in the sensor chip, which makes it challenging to detect biomolecule interactions at ultra-low concentrations. Here, we propose a highly sensitive SPR imaging biosensor which exploits the coffee ring effect (CRE) for in situ enrichment of molecules on the sensing surface. In addition, we designed a wavelength modulation system utilizing two LEDs to reduce the system cost and enhance the detection speed. Furthermore, a detection limit of 213 fM is achieved, which amounts to an approximately 365 times improvement compared to traditional SPR biosensors. With further development, we believe that this SPR imaging system with high sensitivity, less sample consumption, and faster detection speed can be readily applied to ultra-low-concentration molecular detection and interaction analysis.

Highly-Adaptable Optothermal Nanotweezers for Trapping, Sorting, and Assembling across Diverse Nanoparticles

Optical manipulation of various kinds of nanoparticles is vital in biomedical engineering. However, classical optical approaches demand higher laser power and are constrained by diffraction limits, necessitating tailored trapping schemes for specific nanoparticles. They lack a universal and biocompatible tool to manipulate nanoparticles of diverse sizes, charges, and materials. Through precise modulation of diffusiophoresis and thermo-osmotic flows in the boundary layer of an optothermal-responsive gold film, highly adaptable optothermal nanotweezers (HAONTs) capable of manipulating a single nanoparticle as small as sub-10 nm are designed. Additionally, a novel optothermal doughnut-shaped vortex (DSV) trapping strategy is introduced, enabling a new mode of physical interaction between cells and nanoparticles. Furthermore, this versatile approach allows for the manipulation of nanoparticles in organic, inorganic, and biological forms. It also offers versatile function modes such as trapping, sorting, and assembling of nanoparticles. It is believed that this approach holds the potential to be a valuable tool in fields such as synthetic biology, optofluidics, nanophotonics, and colloidal science.

Electrochemical biosensor using SnO2 colloidal quantum wire for monitoring the interaction of microcystin antigen-antibody

Electrochemical sensors that incorporate immunoassay principles have the ability to monitor dynamic processes of antigen-antibody interactions in real time. In this study, a gold electrode was modified with tin dioxide colloidal quantum wire (SnO2 QWs) and then coated with the leucine/arginine subtype microcystin (MC-LR) antibody. The active site of SnO2 QWs that was not bound by MC-LR antibody was then passivated with bovine serum protein (BSA). When the MC-LR antigen binds specifically to the antibodies on the electrode's surface, it triggers electrochemical reactions and generates electrical signals at specific voltage conditions. The SnO2 QW exhibits excellent electron transport ability, and its ability to form a loose and porous microstructure on the gold electrode surface, which is conducive to the receptor function of the biosensor. The results show a high affinity between the MC-LR antigen and antibody, ranging from 1 pg/mL to 10 ng/mL of MC-LR antigen concentration. The kinetic characteristics of the immune reaction between MC-LR antigen and antibody were elucidated, obtaining a binding constant of 1.399 × 1011 M-1 and a dissociation constant of 7.147 pM, demonstrating the potential of electrochemical biosensing technology in biomolecular interactions.

Quasi-phase extraction-based surface plasmon resonance imaging method for coffee ring effect monitoring and biosensing

Wavelength interrogation surface plasmon resonance imaging (WSPRi) sensing has unique advantages in high-throughput imaging detection. The refractive index resolution (RIR) of WSPRi is limited to the order of 10-6 RIU. This paper demonstrates a novel WSPRi sensing system with a wavelength scanning device of an acousto-optic tunable filter (AOTF) and a low-cost speckle-free SPR excitation source of a halogen lamp. We developed a sensitive quasi-phase extraction method for data processing. The new technique achieved an RIR of 8.84×10-7 RIU, which is the first WSPRi system that has an RIR in the order of 10-7 RIU. Moreover, we performed a real-time recording of the formation of the coffee ring effect during brine evaporation and enhanced the biosensor performance of SPR for the first time. We believe the higher RIR and accuracy of the system will benefit more potential applications toward exploring the biomolecules' behaviors in biological and biochemistry studies.

Wake-Riding Effect-Inspired Opto-Hydrodynamic Diatombot for Non-Invasive Trapping and Removal of Nano-Biothreats

Contamination of nano-biothreats, such as viruses, mycoplasmas, and pathogenic bacteria, is widespread in cell cultures and greatly threatens many cell-based bio-analysis and biomanufacturing. However, non-invasive trapping and removal of such biothreats during cell culturing, particularly many precious cells, is of great challenge. Here, inspired by the wake-riding effect, a biocompatible opto-hydrodynamic diatombot (OHD) based on optical trapping navigated rotational diatom (Phaeodactylum tricornutum Bohlin) for non-invasive trapping and removal of nano-biothreats is reported. Combining the opto-hydrodynamic effect and optical trapping, this rotational OHD enables the trapping of bio-targets down to sub-100 nm. Different nano-biothreats, such as adenoviruses, pathogenic bacteria, and mycoplasmas, are first demonstrated to be effectively trapped and removed by the OHD, without affecting culturing cells including precious cells such as hippocampal neurons. The removal efficiency is greatly enhanced via reconfigurable OHD array construction. Importantly, these OHDs show remarkable antibacterial capability, and further facilitate targeted gene delivery. This OHD serves as a smart micro-robotic platform for effective trapping and active removal of nano-biothreats in bio-microenvironments, and especially for cell culturing of many precious cells, with great promises for benefiting cell-based bio-analysis and biomanufacturing.

Strategies for Surface Design in Surface Plasmon Resonance (SPR) Sensing

Surface plasmon resonance (SPR) comprises several surface-sensitive techniques that enable the trace and ultra-trace detection of various analytes through affinity pairing. Although enabling label-free, sensitive detection and real-time monitoring, several issues remain to be addressed, such as poor stability, non-specific adsorption and the loss of operational activity of biomolecules. In this review, the progress over sensor modification, immobilization techniques and novel 2D nanomaterials, gold nanostructures and magnetic nanoparticles for signal amplification is discussed. The advantages and disadvantages of each design strategy will be provided together with some of the recent achievements.

Surface Plasmon Resonance Microscopy Based on Total Internal Reflection

Surface plasmon resonance microscopy (SPRM) has been widely employed in biological fields because of its high spatial resolution and label-free detection modality. In this study, SPRM based on total internal reflection (TIR) is studied via a home-built SPRM system, and the principle of imaging of a single nanoparticle is analyzed as well. By designing a ring filter and combining it with the deconvolution algorithm in Fourier space, the parabolic tail of the nanoparticle image is removed, in which a spatial resolution of 248 nm is obtained. In addition, we also measured the specific binding between the human IgG antigen and goat anti-human IgG antibody using the TIR-based SPRM. The experimental results have proved that the system can image sparse nanoparticles and monitor biomolecular interactions.