High efficiency electrochemiluminescence of 3D porous g-C3N4 with dissolved O2 as co-reactant and its sensing application for ultrasensitive detection of microRNA in tumor cells

N vacancy and self-enhancement induced high anodic electrochemiluminescence of 3D g-C3N4 for sensitive staphylococcus aureus analysis

Here, 3D g-C3N4 with dense N vacancy in its 3D porous interconnected open-framework was synthesized, and the co-reactive 3-(dibutylamino)propylamine (DBAPA) was further covalently coupled onto the surface, resulting in a strong self-enhanced anodic electrochemiluminescence (ECL). Through introduction of high-density N vacancy, for the obtained 3D g-C3N4-NV, the band gap was broadened and the electrical conductivity was enhanced, realizing an obvious ECL improvement. Moreover, after the covalent binding of co-reactive DBAPA, the obtained 3D g-C3N4-NV-DBAPA exhibited a more intensive self-enhanced ECL signal due to the higher co-reaction efficiency originated from shorter electron transfer distance and lower energy loss. Based on the high initial signal of the proposed 3D g-C3N4-NV-DBAPA, a sensitive ECL biosensor with signal "on-off" was fabricated in assistance with multiple horizontal ordered hybridization chain reaction (HO-HCR). Through orderly fixing the reacted DNA chains on the Y-shape DNA structure on the electrode could effectively decrease diffusion process and improve the reaction efficiency of HCR process, resulting in the formation of numerous long horizontal double-strand DNA that could immobilize abundant ferrocene-doxorubicin (Fc-Dox) with ECL quenching effect. Meanwhile, compared to the traditional vertical HCR, the HO-HCR could make the quench reagent closer to the ECL emitter on the electrode surface and obtain a more effective quenching effect to enhance the sensing sensitivity. As a result, the proposed ECL biosensor archived the sensitive measurement of staphylococcus aureus with a detection limit of 10.3 aM.

PdPt@SnS2 Nanosheets for a Novel Ultrasensitive Electrochemiluminescence Biosensor for miRNA-21 Assay

PdPt nanosheets decorated on SnS2 nanosheets (i.e., PdPt@SnS2 NSs) were fabricated for a novel electrochemiluminescence (ECL) biosensor for ultrasensitive detection of miRNA-21 based on catalytic hairpin assembly (CHA) cycles. The PdPt@SnS2 NSs serve as both the main luminophore and a highly effective coreaction accelerator in the ECL biosensor. In the CHA cycles, more miRNA-21 is captured, and the performance of the ECL biosensor is improved. When miRNA-21 is present, the hairpin chain DNA1 (i.e., H1) is opened, and the ferrocene (Fc)-modified hairpin chain DNA2 (i.e., Fc-H2) hybridizes with as-opened H1 by replacing miRNA-21 to stimulate CHA cycles of miRNA-21. During the CHA cycles, Fc-H2 quenches the ECL signal to monitor miRNA-21. As a result, the ECL biosensor shows ultrasensitive and highly selective detection of miRNA-21 from 1 aM to 1 nM with a detection limit (LOD) of 0.02 aM. In addition, the ECL biosensor exhibits excellent practicality for miRNA-21 detection in human serum samples.

Recent Advances in Electrochemiluminescence Biosensors for MicroRNA Detection

Electrochemiluminescence (ECL) as an analytical technology with a perfect combination of electrochemistry and spectroscopy has received considerable attention in bioanalysis due to its high sensitivity and broad dynamic range. Given the selectivity of bio-recognition elements and the high sensitivity of the ECL analysis technique, ECL biosensors are powerful platforms for the sensitive detection of biomarkers, achieving the accurate prognosis and diagnosis of diseases. MicroRNAs (miRNAs) are crucial biomarkers involved in a variety of physiological and pathological processes, whose aberrant expression is often related to serious diseases, especially cancers. ECL biosensors can fulfill the highly sensitive and selective requirements for accurate miRNA detection, prompting this review. The ECL mechanisms are initially introduced and subsequently categorize the ECL biosensors for miRNA detection in terms of the quenching agents. Furthermore, the work highlights the signal amplification strategies for enhancing ECL signal to improve the sensitivity of miRNA detection and finally concludes by looking at the challenges and opportunities in ECL biosensors for miRNA detection.

Functionalized nanomaterials-based electrochemiluminescent biosensors and their application in cancer biomarkers detection

To detect a range of trace biomarkers associated with human diseases, researchers have been focusing on developing biosensors that possess high sensitivity and specificity. Electrochemiluminescence (ECL) biosensors have emerged as a prominent research tool in recent years, owing to their potential superiority in low background signal, high sensitivity, straightforward instrumentation, and ease of operation. Functional nanomaterials (FNMs) exhibit distinct advantages in optimizing electrical conductivity, increasing reaction rate, and expanding specific surface area due to their small size effect, quantum size effect, and surface and interface effects, which can significantly improve the stability, reproducibility, and sensitivity of the biosensors. Thereby, various nanomaterials (NMs) with excellent properties have been developed to construct efficient ECL biosensors. This review provides a detailed summary and discussion of FNMs-based ECL biosensors and their applications in cancer biomarkers detection.

PdPtB Electrochemiluminescence Nanoenhancer and SiC@Au-PEDOT Nanowires-Based Detection of β-Amyloid Oligomers in Alzheimer's Disease

β-Amyloid oligomers (AβOs) are promising biomarkers for the diagnosis of Alzheimer's disease (AD). The present research introduces a novel electrochemiluminescence (ECL) immunosensor based on PdPtB nanoenhancer and SiC@Au-PEDOT nanowires (NWs) for the specific and ultrasensitive detection of AβOs. The PdPtB nanoenhancer exhibited excellent oxidase-like catalytic activity with in situ generation of reactive oxygen species (ROS) to enhance luminol ECL in neutral media. In addition, SiC@Au-PEDOT NWs were utilized as a biocompatible and conductive substrate for the modification of the glassy carbon electrode (GCE). With this design, the ECL immunosensor showed outstanding AβOs analytical performance without exogenous coreactant. The ECL immunosensor demonstrated a favorable linear range of 20 pM to 20 nM and a detection limit of 10 pM under optimized conditions with potential straightforward clinical application. In general, the developed ECL immunosensor provides a promising strategy for the early diagnosis of AD.

A dual-mode method for detection of miRNA based on the photoluminescence and resonance light scattering

MicroRNAs (miRNAs) hold potential as useful biomarkers for early diagnosis and evaluation of diverse cancers, but their low abundance and short length make the detection of miRNAs face low sensitivity and accuracy. Herein, a photoluminescence (PL)-resonance light scattering (RLS) dual-mode method was developed for the sensitive and accurate detection of miRNA-141 using CdTe quantum dots (QDs) and Au nanoparticles. The presence of miRNA-141 induced PL quenching and RLS increasing. The limit of detection (LOD) was as low as 3.7 fM, and the miRNA-141 was detected linearly in a range from 10 fM to 10 nM. The dual signals generated no mutual interference and were detected using the same spectrophotometer, allowing for mutual validation to ensure the accuracy and reliability of the detection results. This study proposes valuable references for constructing dual-mode detection methods.

High-Density N-Vacancy-Induced Multipath Electrochemiluminescence Improvement of 3D g-C3N4 for Ultrasensitive MiRNA-222 Analysis

Using dissolved O₂ as the cathodic co-reactant of three-dimensional (3D) g-C₃N₄ is a convenient method to improve the electrochemiluminescence (ECL) signal, but it still suffers the disadvantages of limited luminous efficiency of 3D g-C₃N₄ and low content, low reactivity, and instability of dissolved O₂. Here, N vacancy with high density was first introduced into the structure of 3D g-C₃N₄ (3D g-C₃N₄-NV), which could conveniently realize multipath ECL improvement by simultaneously solving the above shortcomings effectively. Specifically, N vacancy could change the electronic structure of 3D g-C₃N₄ to broaden its band gap, increase fluorescence (FL) lifetime, and accelerate electron transfer rate, obviously improving the luminous efficiency of 3D g-C₃N₄. Meanwhile, N vacancy made the excitation potential of 3D g-C₃N₄-NV to shift from -1.3 to -0.6 V, effectively weakening the electrode passivation. Moreover, the adsorption capacity of 3D g-C₃N₄-NV was obviously enhanced, which could make the dissolved O₂ enrich around 3D g-C₃N₄-NV. And massive active NV sites of 3D g-C₃N₄-NV could promote O₂ to more efficiently convert to reactive oxygen species (ROS) that were key intermediates in ECL generation. Using the newly proposed 3D g-C₃N₄-NV-dissolved O₂ system as an ECL emitter, an ultrasensitive target conversion biosensor was constructed for miRNA-222 detection. The fabricated ECL biosensor exhibited satisfactory analytical performance for miRNA-222 with a detection limit of 16.6 aM. The strategy achieved multipath ECL improvement by introducing high-density N vacancy simply in the 3D structure of g-C₃N₄ and could open a new horizon for developing a high-performance ECL system.

Ultra-Sensitive MicroRNA Biosensor Based on Strong Aggregation-Induced Electrochemiluminescence from Bidentate Ligand-Stabilized Copper Nanoclusters in Polymer Hydrogel

Herein, dihydrolipoic acid (DHLA)-stabilized copper nanoclusters (Cu NCs) with high aggregation-induced electrochemiluminescence (AIECL) in polymer hydrogel were prepared to construct an ECL biosensor for detection of microRNA-21. DHLA, a small molecule ligand with two sulfhydryl groups, was used as a protective agent to synthesize Cu NCs, which improved the ECL stability and intensity of Cu NCs. Furthermore, the Cu NCs were loaded into the (PVP-PVA)hydrogel to form the DHLA-Cu NCs@(PVP-PVA)hydrogel composite, which showed effective AIECL performance. The confinement of Cu NCs into the hydrogel increased the local concentration of Cu NCs, which could not only prevent oxides from entering the copper core, but also limit the vibration to reduce non-radiative transitions of Cu NCs, leading to a distinct AIECL emission. Then, combined with the self-priming clip trigger isothermal amplification (SCTIA) technology, an ECL biosensor was constructed to realize the sensitive detection of miRNA-21. Interestingly, SCTIA technology was a simple and efficient strategy that realized multiple-cycle amplified processes to acquire a mass of output DNA, achieving remarkable signal amplification. Therefore, this strategy provided an efficient approach in the preparation of Cu NCs with high AIECL emission and target amplification technology, which might have promising potential in clinical application.

The multifunctional Prussian blue/graphitic carbon nitride nanocomposites for fluorescence imaging-guided photothermal and photodynamic combination therapy

Cancer has been regarded as one of the most intractable diseases worldwide and threatens human health and life. Photothermal/Photodynamic therapy (PTT and PDT) have emerged as reliable and effective strategies in cancer treatment with the superiorities of non-invasiveness, slight side effects, and high treatment efficiency. Herein, a nanocomposite (PBCN) was fabricated via electrostatic interaction between Prussian blue nanoparticles (PBNPs) and graphitic carbon nitride (g-C₃N₄), and the resulting PBCN possessed good photothermal properties and excellent photodynamic effects with 808 nm irradiation. Furthermore, it exhibits excellent fluorescence imaging ability in cells, highlighting its potential as a powerful imaging agent in the biomedical field. Combination with a photothermal material, photosensitizer, and fluorescence imaging agent would thus allow PBCN to realize fluorescence imaging-guided PTT/PDT, showing an outstanding theranostic effect on cancer cells.

PEGylated Ni Single-Atom Catalysts as Ultrasensitive Electrochemiluminescent Probes with Favorable Aqueous Dispersibility for Assaying Drug-Resistant Pathogens

Ni single-atom catalysts (SACs) were synthesized by high-temperature calcination of nickel ions and 1,10-phenanthroline on carbon black as a carrier. Benefiting from the ultrahigh atom utilization efficiency, Ni SACs can significantly accelerate decay of dissolved oxygen to generate abundant reactive oxygen species through an oxygen reduction reaction occurring on cathodes. The generated reactive oxygen species can vastly enhance the electrochemiluminescent (ECL) signal of luminol without participation of exogenous co-reactants. To overcome the inherent unfavorable aqueous dispersibility of Ni SACs prepared by the calcination protocol, they were functionalized with highly hydrophilic PEG 2000. Thanks to the abundant carboxyl groups on PEG 2000, the PEGylated Ni SACs (Ni@PEG) can be used as ECL probes to tag biorecognition molecules. In this proof-of-principle work, an ECL biosensor for assaying methicillin-resistant Staphylococcus aureus was developed by using porcine IgG as capture molecule and phage cell-binding domain tagged with Ni@PEG as signal tracer. It shows a broad linear range of 73-7.3 × 10⁶ CFU/mL and a low detection limit of 25 CFU/mL. The recovery values for assaying spiked samples are between 80.8 and 119.2%. It was also utilized to assess MRSA susceptibility to four antibiotics, with results consistent with those obtained by the standard broth microdilution technique. To the best of our knowledge, it is the first time to utilize aqueous dispersible SACs as highly sensitive ECL probes for developing biosensors.