Wireless portable bioelectronic nose device for multiplex monitoring toward food freshness/spoilage

TRPA1 nanovesicle-conjugated receptonics for rapid biocide screening

Although biocides are important materials in modern society and help protect human health and the environment, increasing exposure to combined biocides can cause severe side effects in the human body, such as lung fibrosis. In this study, we developed a receptonics system to screen for biocides in combined household chemical products based on biocides. The system contains transient receptor potential ankyrin 1 (TRPA1) nanovesicles (NVs) to sense biocides based on pain receptors and a side-gated field-effect transistor (SGFET) using a single-layer graphene (SLG) micropattern channel. The binding affinities between the TRPA1 receptor and the various biocides were estimated by performing biosimulation and using a calcium ion (Ca2+) assay, and the sensitivity of the system was compared with that of TRPA1 NV receptonics systems. Based on the results of the TRPA1 NV receptonics system, the antagonistic and potentiation effects of combined biocides and household chemical products depended on the concentration. Finally, the TRPA1 NV receptonics system was applied to screen for biocides in real products, and its performance was successful. Based on these results, the TRPA1 NV receptonics system can be utilized to perform risk evaluations and identify biocides in a simple and rapid manner.

A novel dual-channel cassava starch/polyvinyl alcohol-based film for visual monitoring of shrimp freshness

In this study, the polyvinylpyrrolidone-alizarin nanoparticles (PVP-AZ NPs) with favorable water dispersion and the carbon quantum dots (RQDs) with aggregate induced emission effect were synthesized to construct an eco-friendly film for food freshness monitoring. The introduction of PVP-AZ NPs and RQDs enhanced the network structure and thermal stability of the cassava starch/polyvinyl alcohol film, and reduced its crystallinity and light transmittance via non-covalent binding with the film-forming matrix. The developed film exhibited visually recognizable colorimetric and fluorescent responses to ammonia at 0.025-25 mg/mL, and it can be reused at least 6 times. Practical application experiment proved that the film, as an indicator label, can achieve accurate, real-time, and visual dynamic monitoring of the freshness of shrimp stored at 25 °C, 4 °C, and - 20 °C under daylight (orange yellow to purple) and UV light (red to blue). The integration of multivariate detection technology can eliminate the interference of external factors by self-correction to improve sensitivity and reliability, which provides a reference for the development of other food quality and safety monitoring platforms.

A pattern recognition artificial olfactory system based on human olfactory receptors and organic synaptic devices

Neuromorphic sensors, designed to emulate natural sensory systems, hold the promise of revolutionizing data extraction by facilitating rapid and energy-efficient analysis of extensive datasets. However, a challenge lies in accurately distinguishing specific analytes within mixtures of chemically similar compounds using existing neuromorphic chemical sensors. In this study, we present an artificial olfactory system (AOS), developed through the integration of human olfactory receptors (hORs) and artificial synapses. This AOS is engineered by interfacing an hOR-functionalized extended gate with an organic synaptic device. The AOS generates distinct patterns for odorants and mixtures thereof, at the molecular chain length level, attributed to specific hOR-odorant binding affinities. This approach enables precise pattern recognition via training and inference simulations. These findings establish a foundation for the development of high-performance sensor platforms and artificial sensory systems, which are ideal for applications in wearable and implantable devices.

Highly selective and sensitive histamine and tryptamine analysis using SiO2@AuNPs@PDA molecularly imprinted polymer coupled with SALDI-TOF MS

A combination of SiO2@AuNPs@PDA molecularly imprinted and surface-assisted laser desorption/ionization-time-of-flight mass spectrometry (SALDI-TOF MS) was devised as a method for highly specific and ultrasensitive detection of two biogenic amines-histamine (HIS) and tryptamine (TRP)-in real samples. In this strategy, AuNPs modified amino-abundant silica nanospheres (SiO2@AuNPs). The prepared SiO2@AuNPs were used as a substrate to synthesize a molecularly imprinted polymer (MIP) through in situ dopamine self-polymerization with HIS and TRP as the template molecules (SiO2@AuNP@PDA-MIP). The as-prepared MIP structure, properties, and target-analyte identification conditions were characterized and optimized and it was used as the matrix for MS. Compared to the case of nonimprinted materials, the imprinting function endowed the matrix with a higher selectivity for capturing the target molecules. The enriched analytes were directly and rapidly identified using SALDI-TOF MS without elution. Meanwhile, the proposed method has low background interference, good reproducibility and stability, high salt tolerance, and satisfactory linearity (R2 > 0.99), and it enables ultrasensitive detection of HIS and TRP (limits of detection for HIS and TRP were 0.2 and 0.1 ng mL-1, respectively). Moreover, the proposed method was applied to analyze samples of real beer, sausage, and chicken, and the results agreed with those obtained via liquid chromatography-MS, suggesting that the method has excellent practical applications in the field of food safety.

Synchronous Diagnosis of Respiratory Viruses Variants via Receptonics Based on Modeling Receptor-Ligand Dynamics

The transmission and pathogenesis of highly contagious fatal respiratory viruses are increasing, and the need for an on-site diagnostic platform has arisen as an issue worldwide. Furthermore, as the spread of respiratory viruses continues, different variants have become the dominant circulating strains. To prevent virus transmission, the development of highly sensitive and accurate on-site diagnostic assays is urgently needed. Herein, a facile diagnostic device is presented for multi-detection based on the results of detailed receptor-ligand dynamics simulations for the screening of various viral strains. The novel bioreceptor-treated electronics (receptonics) device consists of a multichannel graphene transistor and cell-entry receptors conjugated to N-heterocyclic carbene (NHC). An ultrasensitive multi-detection performance is achieved without the need for sample pretreatment, which will enable rapid diagnosis and prevent the spread of pathogens. This platform can be applied for the diagnosis of variants of concern in clinical respiratory virus samples and primate models. This multi-screening platform can be used to enhance surveillance and discriminate emerging virus variants before they become a severe threat to public health.

Plasmonic digital PCR for discriminative detection of SARS-CoV-2 variants

We developed a novel strategy for discriminative detection of SARS-CoV-2 variants based on the plasmonic photothermal effect of gold nanofilms and digital polymerase chain reaction (dPCR) technology. This method consists of the gold nanofilm-based dPCR chip fabrication for ultrafast heating and cooling cycles by the plasmonic photothermal effect, the LED quencher immobilization through the interfacing compound on the surface of the gold nanofilm to prevent photoquenching of PCR signaling dye, and the discriminative detection of the variant viruses from the COVID-19 clinical samples by photothermal cycles with fabricated dPCR chips and a portable plasmonic PCR device. Compared to conventional sequencing or RT-qPCR-based variant detection methods, this technology can be effectively applied to point-of-care testing by enabling ultrafast quantitative analysis with a small device. With this method, we successfully detected the delta variant and the omicron variant with a high sensitivity of 10 copies from COVID-19 patients' clinical samples within 25 min, including reverse transcription. This method can be applied universally to rapid and accurate point-of-care testing for various pandemic viruses as well as the coronavirus.

Biomimetic Wearable Sensors: Emerging Combination of Intelligence and Electronics

Owing to the advancement of interdisciplinary concepts, for example, wearable electronics, bioelectronics, and intelligent sensing, during the microelectronics industrial revolution, nowadays, extensively mature wearable sensing devices have become new favorites in the noninvasive human healthcare industry. The combination of wearable sensing devices with bionics is driving frontier developments in various fields, such as personalized medical monitoring and flexible electronics, due to the superior biocompatibilities and diverse sensing mechanisms. It is noticed that the integration of desired functions into wearable device materials can be realized by grafting biomimetic intelligence. Therefore, herein, the mechanism by which biomimetic materials satisfy and further enhance system functionality is reviewed. Next, wearable artificial sensory systems that integrate biomimetic sensing into portable sensing devices are introduced, which have received significant attention from the industry owing to their novel sensing approaches and portabilities. To address the limitations encountered by important signal and data units in biomimetic wearable sensing systems, two paths forward are identified and current challenges and opportunities are presented in this field. In summary, this review provides a further comprehensive understanding of the development of biomimetic wearable sensing devices from both breadth and depth perspectives, offering valuable guidance for future research and application expansion of these devices.

Design of an effective small expression tag to enhance GPCR production in E. coli-based cell-free and whole cell expression systems

G protein-coupled receptors (GPCRs) play crucial roles in sensory, immune, and tumor metastasis processes, making them valuable targets for pharmacological and sensing applications in various industries. However, most GPCRs have low production yields in Escherichia coli (E. coli) expression systems. To overcome this limitation, we introduced AT10 tag, an effective fusion tag that could significantly enhance expression levels of various GPCRs in E. coli and its derived cell-free protein synthesis (CFPS) system. This AT10 tag consisted of an A/T-rich gene sequence designed via optimization of translation initiation rate. It is translated into a short peptide sequence of 10 amino acids at the N-terminus of GPCRs. Additionally, effector proteins could be utilized to suppress cytotoxicity caused by membrane protein expression, further boosting GPCR production in E. coli. Enhanced expression of various GPCRs using this AT10 tag is a promising approach for large-scale production of functional GPCRs in E. coli-based CFPS and whole cell systems, enabling their potential utilization across a wide range of industrial applications.

Advancing biological investigations using portable sensors for detection of sensitive samples

Portable biosensors are emerged as powerful diagnostic tools for analyzing intricately complex biological samples. These biosensors offer sensitive detection capabilities by utilizing biomolecules such as proteins, nucleic acids, microbes or microbial products, antibodies, and enzymes. Their speed, accuracy, stability, specificity, and low cost make them indispensable in forensic investigations and criminal cases. Notably, portable biosensors have been developed to rapidly detect toxins, poisons, body fluids, and explosives; they have proven invaluable in forensic examinations of suspected samples, generating efficient results that enable effective and fair trials. One of the key advantages of portable biosensors is their ability to provide sensitive and non-destructive detection of forensic samples without requiring extensive sample preparation, thereby reducing the possibility of false results. This comprehensive review provides an overview of the current advancements in portable biosensors for the detection of sensitive materials, highlighting their significance in advancing investigations and enhancing sensitive sample detection capabilities.

Chitosan-Based Hydrogel-Incorporated Trp-CDs with Antibacterial Properties and pH-Mediated Fluorescence Response as a Smart Food Preservation Material

The great problem of food spoilage is causing food waste worldwide. However, prolonging the shelf life of food and responding to spoilage are good strategies for dealing with this problem. Herein, we present the design of multifunctional chitosan-based hydrogel-incorporated tryptophan carbon quantum dots (Trp-CDs) with antibacterial properties and pH-mediated fluorescence response (pH = 1-13). This chitosan (CS)/tannic acid (TA)/Trp-CDs hydrogel (CTTC hydrogel) was rapidly formed by a high density of hydrogen bonds and has the advantages of good mechanical properties (1628.55 kPa, 280%), washability (5-10 min), antioxidant activity (95.83%), and antibacterial properties. In practical application with fruits, the hydrogel significantly prolonged the shelf life of strawberries by at least 5 days and oranges by 20 days under ambient conditions. In particular, the hydrogel has good pH-mediated fluorescence responsiveness and reversibility due to doping with Trp-CDs, laying a foundation for its application in response to food spoilage.

Ni-rGO Sensor Combined with Human Olfactory Receptor-Embedded Nanodiscs for Detecting Gas-Phase DMMP as a Simulant of Nerve Agents

Nerve agents are organophosphorus toxic chemicals that can inhibit acetylcholinesterase, leading to paralysis of the nervous system and death. Early detection of nerve agents is important for safety issues. Dimethyl methylphosphonate (DMMP) is widely used as a simulant of nerve agents, and many studies have been conducted using DMMP as a substitute for detecting nerve agents. Despite many studies on sensors for detecting DMMP, they have limitations in sensitivity and selectivity. To overcome these limitations, a nickel-decorated reduced graphene oxide (Ni-rGO) sensor with human olfactory receptor hOR2T7 nanodiscs was utilized to create a bioelectronic nose platform for DMMP gas detection. hOR2T7 was produced and reconstituted into nanodiscs for enhancing the sensor's stability, especially for detection in a gas phase. It could detect DMMP gas selectively and repeatedly at a concentration of 1 ppb. This sensitive and selective bioelectronic nose can be applied as a practical tool for the detection of gaseous chemical warfare agents in military and safety fields.

Detection of Counterfeit Perfumes by Using GC-MS Technique and Electronic Nose System Combined with Chemometric Tools

The Scientific Committee on Cosmetic and Non-Food Products has identified 26 compounds that may cause contact allergy in consumers when present in concentrations above certain legal thresholds in a product. Twenty-four of these compounds are volatiles and can be analyzed by gas chromatography-mass spectrometry (GC-MS) or electronic nose (e-nose) technologies. This manuscript first describes the use of the GC-MS approach to identify the main volatile compounds present in the original perfumes and their counterfeit samples. The second part of this work focusses on the ability of an e-nose system to discriminate between the original fragrances and their counterfeits. The analyses were carried out using the headspace of the aqueous solutions. GC-MS analysis revealed the identification of 10 allergens in the perfume samples, some of which were only found in the imitated fragrances. The e-nose system achieved a fair discrimination between most of the fragrances analyzed, with the counterfeit fragrances being clearly separated from the original perfumes. It is shown that associating the e-nose system to the appropriate classifier successfully solved the classification task. With Principal Component Analysis (PCA), the three first principal components represented 98.09% of the information in the database.

Artificial Olfactory Biohybrid System: An Evolving Sense of Smell

The olfactory system can detect and recognize tens of thousands of volatile organic compounds (VOCs) at low concentrations in complex environments. Bioelectronic nose (B-EN), which mimics olfactory systems, is becoming an emerging sensing technology for identifying VOCs with sensitivity and specificity. B-ENs integrate electronic sensors with bioreceptors and pattern recognition technologies to enable medical diagnosis, public security, environmental monitoring, and food safety. However, there is currently no commercially available B-EN on the market. Apart from the high selectivity and sensitivity necessary for volatile organic compound analysis, commercial B-ENs must overcome issues impacting sensor operation and other problems associated with odor localization. The emergence of nanotechnology has provided a novel research concept for addressing these problems. In this work, the structure and operational mechanisms of biomimetic olfactory systems are discussed, with an emphasis on the development and immobilization of materials. Various biosensor applications and current developments are reviewed. Challenges and opportunities for fulfilling the potential of artificial olfactory biohybrid systems in fundamental and practical research are investigated in greater depth.

Advances in the Production of Olfactory Receptors for Industrial Use

In biological olfactory systems, olfactory receptors (ORs) can recognize and discriminate between thousands of volatile organic compounds with very high sensitivity and specificity. The superior properties of ORs have led to the development of OR-based biosensors that have shown promising potential in many applications over the past two decades. In particular, newly designed technologies in gene synthesis, protein expression, solubilization, purification, and membrane mimetics for membrane proteins have greatly opened up the previously inaccessible industrial potential of ORs. In this review, gene design, expression and solubilization strategies, and purification and reconstitution methods available for modern industrial applications are examined, with a focus on ORs. The limitations of current OR production technology are also estimated, and future directions for further progress are suggested.

Application of Polyoxometalates in Chemiresistive Gas Sensors: A Review

Polyoxometalates (POMs) are a series of molecular metal compounds based on W and Mo elements, exhibiting excellent physical and chemical properties. POMs have been widely used in the fields of photoelectric materials, catalytic materials, and coordination chemistry. In recent years, POMs have emerged in the field of chemiresistive gas sensors. They can work as electron acceptors and improve the gas-sensing performance of traditional sensing materials by means of capturing electrons from semiconductors, separating electrons produced by light excitation or thermal excitation and delaying the recombination of electrons and holes. So far, the highest sensing sensitivity response of POMs-based chemiresistive gas sensor is 231 to 1 ppm NO₂ gas. In this review, an overview is investigated about how POMs have evolved as sensing materials in gas sensors. First, some POMs and POMs-based sensing materials in recent years are introduced and classified. After that, brief analyses for each kind of sensing materials are provided. Then we compare the reported POMs-based sensors in different sensing parameters. Finally, the future outlooks are discussed on the basis of the current developments. This work is the first comprehensive overview of POMs-based chemiresistive gas sensors. This work can provide valuable information for developing high-performance POMs-based gas sensors.

Bioelectrical Nose Platform Using Odorant-Binding Protein as a Molecular Transporter Mimicking Human Mucosa for Direct Gas Sensing

Recently, various bioelectronic nose devices based on human receptors were developed for mimicking a human olfactory system. However, such bioelectronic nose devices could operate in an aqueous solution, and it was often very difficult to detect insoluble gas odorants. Here, we report a portable bioelectronic nose platform utilizing a receptor protein-based bioelectronic nose device as a sensor and odorant-binding protein (OBP) as a transporter for insoluble gas molecules in a solution, mimicking the functionality of human mucosa. Our bioelectronic nose platform based on I7 receptor exhibited dose-dependent responses to octanal gas in real time. Furthermore, the bioelectronic platforms with OBP exhibited the sensor sensitivity improved by ∼100% compared with those without OBP. We also demonstrated the detection of odorant gas from real orange juice and found that the electrical responses of the devices with OBP were much larger than those without OBP. Since our bioelectronic nose platform allows us to directly detect gas-phase odorant molecules including a rather insoluble species, it could be a powerful tool for versatile applications and basic research based on a bioelectronic nose.

Progress in the Development of Detection Strategies Based on Olfactory and Gustatory Biomimetic Biosensors

The biomimetic olfactory and gustatory biosensing devices have broad applications in many fields, such as industry, security, and biomedicine. The development of these biosensors was inspired by the organization of biological olfactory and gustatory systems. In this review, we summarized the most recent advances in the development of detection strategies for chemical sensing based on olfactory and gustatory biomimetic biosensors. First, sensing mechanisms and principles of olfaction and gustation are briefly introduced. Then, different biomimetic sensing detection strategies are outlined based on different sensing devices functionalized with various molecular and cellular components originating from natural olfactory and gustatory systems. Thereafter, various biomimetic olfactory and gustatory biosensors are introduced in detail by classifying and summarizing the detection strategies based on different sensing devices. Finally, the future directions and challenges of biomimetic biosensing development are proposed and discussed.

Open-Bandgap Graphene-Based Field-Effect Transistor Using Oligo(phenylene-ethynylene) Interfacial Chemistry

Organic interfacial compounds (OICs) are required as linkers for the highly stable and efficient immobilization of bioprobes in nanobiosensors using 2D nanomaterials such as graphene. Herein, we first demonstrated the fabrication of a field-effect transistor (FET) via a microelectromechanical system process after covalent functionalization on large-scale graphene by introducing oligo(phenylene-ethynylene)amine (OPE). OPE was compared to various OICs by density functional theory simulations and was confirmed to have a higher binding energy with graphene and a lower band gap than other OICs. OPE can improve the immobilization efficiency of a bioprobe by forming a self-assembly monolayer via anion-based reaction. Using this technology, Magainin I-conjugated OGMFET (MOGMFET) showed a high sensitivity, high selectivity, with a limit of detection of 10⁰  cfu mL^-1 . These results indicate that the OPE OIC can be applied for stable and comfortable interfacing technology for biosensor fabrication.

Portable Vertical Graphene@Au-Based Electrochemical Aptasensing Platform for Point-of-Care Testing of Tau Protein in the Blood

Alzheimer’s disease (AD) is a long-term neurodegenerative disease that poses a serious threat to human life and health. It is very important to develop a portable quantitative device for AD diagnosis and personal healthcare. Herein, we develop a portable electrochemical sensing platform for the point-of-care detection of AD biomarkers in the blood. Such a portable platform integrates nanoAu-modified vertical graphene (VG@Au) into a working electrode, which can significantly improve sensitivity and reduce detection limit due to the large specific surface, excellent electrical conductivity, high stability, and good biocompatibility. The tau protein, as an important factor in the course of AD, is selected as a key AD biomarker. The results show that the linear range of this sensing platform is 0.1 pg/mL to 1 ng/mL, with a detection limit of 0.034 pg/mL (S/N = 3), indicating that this portable sensing platform meets the demand for the detection of the tau protein in the blood. This work offers great potential for AD diagnosis and personal healthcare.