Near-infrared light-induced photoelectrochemical biosensor based on plasmon-enhanced upconversion nanocomposites for microRNA-155 detection with cascade amplifications

Signal amplification strategies in photoelectrochemical sensing of carcinoembryonic antigen

Early detection of cancer markers is critical for cancer diagnosis and cancer therapy since these markers may indicate cancer risk, incidence, and disease prognosis. Carcinoembryonic antigen (CEA) is a type of non-specific and broad-spectrum cancer biomarker commonly utilized for early cancer diagnosis. Moreover, it serves as an essential tool to assess the efficacy of cancer treatment and monitor tumor recurrence as well as metastasis, thus garnering significant attention for precise and sensitive CEA detection. In recent years, photoelectrochemical (PEC) techniques have emerged as prominent methods in CEA detection due to the advantages of PEC, such as simple equipment requirements, cost-effectiveness, high sensitivity, low interference from background signals, and easy of instrument miniaturization. Different signal amplification methods have been reported in PEC sensors for CEA analysis. Based on these, this article reviews PEC sensors based on various signal amplification strategies for detection of CEA during the last five years. The advantages and drawbacks of these sensors were discussed, as well as future challenges.

Cross-Priming-Linked Hierarchical Isothermal Amplification Programming Progressive Activating Clustered Regularly Interspaced Short Palindromic Repeats/Cas12a in miRNA Signaling

Cascade isothermal nucleic acid amplification, which integrates several different amplification protocols to enhance the assay performance, is widely utilized in biosensing, particularly for detecting microRNAs (miRNAs), crucial biomarkers associated with tumor initiation and progression. However, striking a balance between a high amplification efficiency and simplicity in design remains a challenge. Therefore, methods achieving high amplification efficiency without significantly increasing complexity are highly favored. In this study, we propose a novel approach for miRNA detection, employing cross-priming-linked hierarchical isothermal amplification (CP-HIA) to progressively activate the clustered regularly interspaced short palindromic repeats (CRISPR)/Cas12a system. The CP-HIA method strategically combines nicking-rolling circle amplification (n-RCA) and palindrome-aided circular strand displacement amplification (p-CSDA) for miRNA detection. Remarkably, this method utilizes only two main probes. Its key innovation lies in the interactive cross-priming strategy, wherein the amplification product from n-RCA is recycled to further drive p-CSDA, and vice versa. This interactive process establishes a hierarchical amplification, significantly enriching the activation probes for progressive CRISPR/Cas12a activation and subsequent target signal amplification. Consequently, the method exhibits greatly enhanced analytical performance, including high sensitivity and specificity in detecting low concentrations of miRNA. As low as 1.06 fM miRNA can thus be quantitatively detected, and the linear response of the miRNA is from 10 fM to 10 nM. These features demonstrate its potential for early disease diagnosis and monitoring. We anticipate that the CP-HIA method will serve as a promising platform for developing advanced molecular diagnostic tools for biomedical research.

Red and near-infrared light-activated photoelectrochemical nanobiosensors for biomedical target detection

Photoelectrochemical (PEC) nanobiosensors integrate molecular (bio)recognition elements with semiconductor/plasmonic photoactive nanomaterials to produce measurable signals after light-induced reactions. Recent advancements in PEC nanobiosensors, using light-matter interactions, have significantly improved sensitivity, specificity, and signal-to-noise ratio in detecting (bio)analytes. Tunable nanomaterials activated by a wide spectral radiation window coupled to electrochemical transduction platforms have further improved detection by stabilizing and amplifying electrical signals. This work reviews PEC biosensors based on nanomaterials like metal oxides, carbon nitrides, quantum dots, and transition metal chalcogenides (TMCs), showing their superior optoelectronic properties and analytical performance for the detection of clinically relevant biomarkers. Furthermore, it highlights the innovative role of red light and NIR-activated PEC nanobiosensors in enhancing charge transfer processes, protecting them from biomolecule photodamage in vitro and in vivo applications. Overall, advances in PEC detection systems have the potential to revolutionize rapid and accurate measurements in clinical diagnostic applications. Their integration into miniaturized devices also supports the development of portable, easy-to-use diagnostic tools, facilitating point-of-care (POC) testing solutions and real-time monitoring.

Near-infrared light-induced homogeneous photoelectrochemical biosensor based on 3D walking nanomotor-assisted CRISPR/Cas12a for ultrasensitive microRNA-155 detection

The dysregulation of microRNA (miRNA) expression levels is intricately linked to a myriad of human diseases, and the precise and delicate detection thereof holds paramount significance in the realm of clinical diagnosis and therapy. Herein, a near-infrared (NIR) light-mediated homogeneous photoelectrochemical (PEC) biosensor was constructed for miRNA-155 detection based on NaYF4: Yb, Tm@ZnIn2S4 (NYF@ ZIS) coupled with a three-dimensional (3D) walking nanomotor-assisted CRISPR/Cas12a strategy. The upconverted light emitted by the NYF in the visible and UV region upon NIR light excitation could be utilized to excite ZIS to produce a photocurrent response. The presence of target miRNA-155 initiated an amplification reaction within the 3D walking nanomotor, resulting in the production of multiple nucleic acid fragments. These fragments could activate the collateral cleavage capability of CRISPR/Cas12a, leading to the indiscriminate cleavage of single-stranded DNA (ssDNA) on ALP-ssDNA-modified magnetic beads and the subsequent liberation of alkaline phosphatase (ALP). The released ALP facilitated the catalysis of ascorbic acid 2-phosphate to generate ascorbic acid as the electron donor to capture the photogenerated holes on the NYF@ZIS surface, resulting in a positively correlated alteration in the photocurrent response. Under optimal conditions, the NIR light-initiated homogeneous PEC biosensor had the merits of good linear range (0.1 fM to 100 pM), an acceptable limit of detection (65.77 aM) for miRNA-155 detection. Considering the pronounced sensitivity, light stability, and low photodamage, this strategy presents a promising platform for detecting various other miRNA biomarkers in molecular diagnostic practice.

Integrating target-responsive microfluidic-based biosensing chip with smartphone for simultaneous quantification of multiple fluoroquinolones

The presence of fluoroquinolone (FQs) antibiotic residues in the food and environment has become a significant concern for human health and ecosystems. In this study, the background-free properties of upconversion nanoparticles (UCNPs), the high specificity of the target aptamer (Apt), and the high quenching properties of graphene oxide (GO) were integrated into a microfluidic-based fluorescence biosensing chip (MFBC). Interestingly, the microfluidic channels of the MFBC were prepared by laser-printing technology without the need for complex preparation processes and additional specialized equipment. The target-responsive fluorescence biosensing probes loaded on the MFBC were prepared by self-assembly of the UCNPs-Apt complex with GO based on π-π stacking interactions, which can be used for the detection of the two FQs on a large scale without the need for multi-step manipulations and reactions, resulting in excellent multiplexed, automated and simultaneous sensing capabilities with detection limits as low as 1.84 ng/mL (enrofloxacin) and 2.22 ng/mL (ciprofloxacin). In addition, the MFBC was integrated with a smartphone into a portable device to enable the analysis of a wide range of FQs in the field. This research provides a simple-to-prepare biosensing chip with great potential for field applications and large-scale screening of FQs residues in the food and environment.

Self-powered photoelectrochemical immunosensing platform for sensitive CEA detection using dual-photoelectrode synergistic signal amplification

Self-powered photoelectrochemical (PEC) sensing, as an emerging sensing mode, can effectively solve the problems such as weak anti-interference ability and poor signal response of individual photoanode or photocathode sensing. In this work, an ITO/Co-CuInS2 photocathode and ITO/WO3@CdS photoanode based self-powered cathodic PEC immunosensor was developed, which integrated dual-photoelectrode to synergistic amplify the signal for highly sensitive and specific detection of carcinoembryonic antigen (CEA). The self-powered PEC sensor could drive electrons transfer through the difference in Fermi levels between the two photoelectrodes without an external bias voltage. The photoanode was introduced to amplify the photoelectric signal, and the photocathode was only designed for the construction of sensing interfaces. The proposed sensor quantitatively determined the target CEA with the detection limit of 0.23 pg/mL and a linear correlation confine of 0.1 pg/mL ∼100 ng/mL. The constructed immunosensing platform exhibited high sensitivity, satisfactory stability and great biological detection selectivity, providing a feasible and effective strategy for the manufacture of new self-powered sensors in high-performance PEC bioanalytical applications.

Development of fluorescent GO-AgNPs-Eu3+ nanoparticles based paper visual sensor for foodborne spores detection

Foodborne spores are ubiquitous with extremely strong resistance, and pose a serious threat to food safety and human health. Therefore, rapid, sensitive, and selective detection of spores are crucial. In this study, a fluorescent probe was developed based on lanthanide ion (Eu3+)-labeled nano-silver-modified graphene oxide (GO-AgNPs-Eu3+) for the detection of 2,6-dipicolinic acid (DPA), a biomarker unique to spores, to allow quantitative spores detection. The GO-AgNPs-Eu3+ nano-fluorescent probe was loaded onto a polyvinylidene fluoride microfiltration membrane, and a smartphone-assisted portable GO-AgNPs-Eu3+ nanoparticles-based paper visual sensor was designed for rapid on-site quantitative and real-time online detection of spores. The results indicated that the developed probe achieved equilibrium binding with DPA within 5 min, and enhanced fluorescence emission through antenna effect. The fluorescence detection presented a good linear relationship in the DPA concentration range of 0-45 μM, with a DPA detection limit of 4.62 nM and spore detection limit of 104 cfu/mL. The developed sensor showed a change in fluorescence from blue to red with increasing DPA concentration, and this color change was quantitatively detected through smartphone RGB variations, with a detection limit of 13.1 μM for DPA and 6.3 cfu/mL for Bacillus subtilis spores. Subsequently, the sensitivity and selectivity of the developed sensor were verified using actual milk and water samples spiked with B. subtilis spores. The results of this study provided objective technological support for rapid detection of spores, which is important for reducing the occurrence of foodborne diseases and improving food safety.

2D Z-scheme ZnIn2S4/g-C3N4 heterojunction based on photoelectrochemical immunosensor with enhanced carrier separation for sensitive detection of CEA

Semiconducting materials based on photoelectrochemical (PEC) sensors have been widely utilized for detection. Meanwhile, the sensitivity of the PEC sensor was limited by low-efficiency carrier separation. Thus, a novel sandwich-type PEC bioimmunosensing based on 2D Z-scheme ZnIn2S4/g-C3N4 heterojunction as a photosensitive material and BiVO4 as a photoquencher was designed for the sensitive detection of carcinoembryonic antigen (CEA). Firstly, the 2D ZnIn2S4/g-C3N4 structure provided a multitude of activated sites which facilitated the loading of the capture antibody (Ab1). Secondly, the Z-scheme heterojunction had a high redox capacity while promoting the rapid separation and migration of photogenerated electron-hole pairs (e-/h+). Thus it was able to consume more electron donors to a certain extent, resulting in a higher initial photocurrent. In addition, BiVO4 with large spatial potential resistance was introduced for the first time to realize signal amplification. BiVO4 could not only compete with substrate materials for electron donors, but also effectively prevent electron donors from contacting the substrate, further reducing the photocurrent signal. Under optimized conditions, the sensor had a favorable detection range (0.0001-100 ng/mL) to CEA and a low detection limit of 0.03 pg/mL. With high specificity, excellent stability, and remarkable reproducibility, this sensor provided a new perspective for constructing accurate and convenient PEC immunosensor for bioanalysis and early disease diagnosisdisease diagnosis.

Upconversion-Powered Photoelectrochemical Bioanalysis for DNA Sensing

In this work, we report a new concept of upconversion-powered photoelectrochemical (PEC) bioanalysis. The proof-of-concept involves a PEC bionanosystem comprising a NaYF4:Yb,Tm@NaYF4 upconversion nanoparticles (UCNPs) reporter, which is confined by DNA hybridization on a CdS quantum dots (QDs)/indium tin oxide (ITO) photoelectrode. The CdS QD-modified ITO electrode was powered by upconversion absorption together with energy transfer effect through UCNPs for a stable photocurrent generation. By measuring the photocurrent change, the target DNA could be detected in a specific and sensitive way with a wide linear range from 10 pM to 1 μM and a low detection limit of 0.1 pM. This work exploited the use of UCNPs as signal reporters and realized upconversion-powered PEC bioanalysis. Given the diversity of UCNPs, we believe it will offer a new perspective for the development of advanced upconversion-powered PEC bioanalysis.

Advancements and applications of upconversion nanoparticles in wound dressings

Wound healing is a complex process that requires effective management to prevent infections and promote efficient tissue regeneration. In recent years, upconversion nanoparticles (UCNPs) have emerged as promising materials for wound dressing applications due to their unique optical properties and potential therapeutic functionalities. These nanoparticles possess enhanced antibacterial properties when functionalized with antibacterial agents, helping to prevent infections, a common complication in wound healing. They can serve as carriers for controlled drug delivery, enabling targeted release of therapeutic agents to the wound site, allowing for tailored treatment and optimal healing conditions. These nanoparticles possess the ability to convert near-infrared (NIR) light into the visible and/or ultraviolet (UV) regions, making them suitable for therapeutic (photothermal therapy and photodynamic therapy) and diagnostic applications. In the context of wound healing, these nanoparticles can be combined with other materials such as hydrogels, fibers, metal-organic frameworks (MOFs), graphene oxide, etc., to enhance the healing process and prevent the growth of microbial infections. Notably, UCNPs can act as sensors for real-time monitoring of the wound healing progress, providing valuable feedback to healthcare professionals. Despite their potential, the use of UCNPs in wound dressing applications faces several challenges. Ensuring the stability and biocompatibility of UCNPs under physiological conditions is crucial for their effective integration into dressings. Comprehensive safety and efficacy evaluations are necessary to understand potential risks and optimize UCNP-based dressings. Scalability and cost-effectiveness of UCNP synthesis and manufacturing processes are important considerations for practical applications. In addition, efficient incorporation of UCNPs into dressings, achieving uniform distribution, poses an important challenge that needs to be addressed. Future research should prioritize addressing concerns regarding stability and biocompatibility, efficient integration into dressings, rigorous safety evaluation, scalability, and cost-effectiveness. The purpose of this review is to critically evaluate the advantages, challenges, and key properties of UCNPs in wound dressing applications to provide insights into their potential as innovative solutions for enhancing wound healing outcomes. We have provided a detailed description of various types of smart wound dressings, focusing on the synthesis and biomedical applications of UCNPs, specifically their utilization in different types of wound dressings.

One Stone Two Birds: An Upconversion Nanosensor for Sensitive Detection of Fluoroquinolones in Aquatic Products Based on Chelation Recognition

Excessive residues of fluoroquinolones (FQs) in aquatic products have become a growing issue in recent years. Herein, we demonstrate an upconversion fluorescence nanosensor constructed by a one-stone-two-birds strategy, where Fe3+ not only quenches upconversion fluorescence with high efficiency but also specifically recognizes the bidentate ligand structure of FQs. Compared to existing methods, the proposed sensor is simpler to synthesize and cheap and has more storage stability due to the unification of the quencher and recognition molecule. Enrofloxacin (ENR) was chosen as a representative veterinary drug for FQs to verify the effectiveness of the nanosensor. Under optimal conditions, the range of detection for ENR was 2.0 × 10-2 to 2.0 × 102 μg/mL, with a limit of detection of 1.08 × 10-3 μg/mL. The developed nanosensor was further validated by high-performance liquid chromatography-ultraviolet (HPLC-UV) without significant differences in practical detection. Hence, this study offers a potential strategy for the detection of FQs.