Bacteriophage T7 transcription system: an enabling tool in synthetic biology

A minimal transcription template-based amplification-free CRISPR-Cas13a strategy for DNA detection

CRISPR-Cas13a has shown great potential for the rapid and accurate detection of pathogen nucleic acids. However, conventional CRISPR-Cas13a-based assays typically require pre-amplification, which can introduce aerosol contamination and operational complexities. In this study, we developed a Minimalist transcription template-based Amplification-free CRISPR-Cas13a strategy for DNA detection (MAD). This strategy facilitates the release of pathogen DNA and its annealing with primers from nasopharyngeal swab samples in a straightforward manner, followed by T7 transcription and CRISPR-Cas13a detection, completing the entire process within 40 min. MAD eliminates the need for DNA extraction and pre-amplification while maintaining high sensitivity after optimization, allowing for result visualization via lateral flow strips. Furthermore, evaluation of 167 clinical pediatric samples identified 18 positive cases of human adenovirus, demonstrating a 99.4% concordance in detection compared to standard qPCR. We believe that MAD offers new insights into CRISPR-Cas diagnostics and, due to its simplicity, rapidity, and safety, is poised for widespread application in clinical practice.

Engineering a phi15-based expression system for stringent gene expression in Pseudomonas putida

The T7 phage RNA polymerase (RNAP) is a widely used expression platform, but its implementation in non-model microbial hosts poses significant challenges due to cytotoxicity. We constructed an optimized phage phi15-based expression system as alternative to the T7 platform for a wide range of applications in Pseudomonas putida. The new system employs the small phi15 RNAP, driving expression from an orthogonal phi15 promoter. By finetuning expression levels of phi15rnap and introducing a phi15 lysozyme mutant that inhibits phi15 RNAP in uninduced conditions, a stringent system was created with 200-fold inducibility. Moreover, by successfully decoupling cell growth and protein production using phi15 gp16, a host RNAP inhibitor, expression levels could be enhanced further (20%). Apart from creating four optimized platform P. putida hosts and a set of Golden Gate-compatible vectors, we demonstrate the extensive flexibility of the phi15 system. A proof-of-concept expression for industrially relevant fluorinase resulted in 2.5- and 5-fold increased yield compared to other widely-adopted expression systems. The system functions well in combination with several inducer systems, and in a variety of vector-based and genomically integrated set-ups. In conclusion, the phi15 RNAP, promoter, lysozyme and growth-decoupler provide a valuable plug-and-play set of genetic parts for the P. putida toolbox.

Customized design of host-independent T7 expression system (HITES) for a broad host range

Efficient methods and universal DNA elements are eagerly required for the expression of proteins and the production of target chemicals in synthetic biology and metabolic engineering. This paper develops a customized-design approach by utilizing the host-independent T7 expression system (HITES), which facilitates the rational design and rapid construction of T7 expression systems. Firstly, the EiL (Upper-limit value of initial enzyme activity) value is discovered to play a pivotal factor in the successful construction of the T7 expression system, different host strains exhibit varying EiL values, and this study presents a method to measure the EiL values. Secondly, E. coli DH5α is chosen as the host strain, and it demonstrates that various strategies to modulate T7 RNA polymerase activity can efficiently construct the HITES T7 expression system in E. coli DH5α under the guidance of EiL. Lastly, the customized-design of HITES enables the efficient expression of sfGFP and D-MIase proteins across 13 host strains, guided by EiL values. This customized-design method of HITES offers a streamlined pathway for T7 system construction across a broad range of hosts and serves as an enabling tool for synthetic biology, metabolic engineering, and enzyme engineering.

Considerations for Domestication of Novel Strains of Filamentous Fungi

Fungi, especially filamentous fungi, are a relatively understudied, biotechnologically useful resource with incredible potential for commercial applications. These multicellular eukaryotic organisms have long been exploited for their natural production of useful commodity chemicals and proteins such as enzymes used in starch processing, detergents, food and feed production, pulping and paper making and biofuels production. The ability of filamentous fungi to use a wide range of feedstocks is another key advantage. As chassis organisms, filamentous fungi can express cellular machinery, and metabolic and signal transduction pathways from both prokaryotic and eukaryotic origins. Their genomes abound with novel genetic elements and metabolic processes that can be harnessed for biotechnology applications. Synthetic biology tools are becoming inexpensive, modular, and expansive while systems biology is beginning to provide the level of understanding required to design increasingly complex synthetic systems. This review covers the challenges of working in filamentous fungi and offers a perspective on the approaches needed to exploit fungi as microbial cell factories.

Laccase surface-display for environmental tetracycline removal: From structure to function

Facing the increasingly prominent tetracycline pollution and the resulting environmental problems, how to find environmental and efficient treatment means is one of the current research hotspots. In this study, the laccase surface-display technology for tetracycline treatment was investigated. Via study, the type of anchoring protein had a minor influence on the laccase ability, while the type of laccase showed a major impact. Bacillus subtilis spore coat protein (CotA) exhibited higher laccase activity, stability, and efficiency in degrading tetracycline than Pleurotus ostreatus laccase 6 (Lacc6). The superiority of bacterial laccase over fungal laccase was elucidated from the perspective of crystal structure. Besides, a variety of technical means were used to verify the success of surface-display. pGSA-CotA surface-displayed bacteria exhibited good tolerance to high temperature, pH, and various heavy metals. Importantly, surface-displayed bacteria showed faster degradation efficiency and better treatment effects than the intracellular expression bacteria in tetracycline degradation. This implies that surface display technology has greater potential for laccase-mediated environmental remediation. Due to the adverse impacts of tetracycline on soil enzyme activity and microorganisms, our study found that pGSA-CotA surface-displayed bacteria can alleviate tetracycline stress in soil and partially activate the soil, thereby increasing soil enzyme activity and certain nitrogen cycling genes.

ASIA: An automated stress-inducible adaptor for enhanced stress protein expression in engineered Escherichia coli

Orthogonal T7 RNA polymerase (T7RNAP) and T7 promoter is a potent technique for protein expression in broad cells, but the energy requirements associated with this method impede the growth, leading to cell lysis when dealing with toxic and stress proteins. A Lemo21(DE3) strain denoted as L21 offers a solution by fine-tuning T7RNAP levels under rhamnose to induce T7 lysozyme (LysY) and enhance the protein production, but it requires optimization of inducer concentration, cultural temperature, and condition, even the types of carbon sources. Herein, we construct an automated stress-inducible adaptor (ASIA) employing different stress-inducible promoters from Escherichia coli. The ASIA system is designed to automatically regulate LysY expression in response to stress signals, thereby suppressing T7RNAP and amplifying the overexpression of stress protein cutinase ICCM. This approach fine-tunes T7RNAP levels and outperforms L21 in various temperatures and carbon source conditions. The ASIAhtp strain maintains ICCM yield at 91.6 mg/g-DCW even in the limiting carbon source at 1 g/L, which is 12-fold higher in protein productivity compared to using L21. ASIA as a versatile and robust tool for enhancing overexpression of stress proteins in E. coli is expected to address more difficult proteins in the future.

Re-defining how mRNA degradation is coordinated with transcription and translation in bacteria

In eukaryotic cells, transcription, translation, and mRNA degradation occur in distinct subcellular regions. How these mRNA processes are organized in bacteria, without employing membrane-bound compartments, remains unclear. Here, we present generalizable principles underlying coordination between these processes in bacteria. In Escherichia coli, we found that co-transcriptional degradation is rare for mRNAs except for those encoding inner membrane proteins, due to membrane localization of the main ribonuclease, RNase E. We further found, by varying ribosome binding sequences, that translation affects mRNA stability not because ribosomes protect mRNA from degradation, but because low translation leads to premature transcription termination in the absence of transcription-translation coupling. Extending our analyses to Bacillus subtilis and Caulobacter crescentus, we established subcellular localization of RNase E (or its homolog) and premature transcription termination in the absence of transcription-translation coupling as key determinants that explain differences in transcriptional and translational coupling to mRNA degradation across genes and species.

A low-cost and eco-friendly recombinant protein expression system using copper-containing industrial wastewater

The development of innovative methods for highly efficient production of recombinant proteins remains a prominent focus of research in the biotechnology field, primarily due to the fact that current commercial protein expression systems rely on expensive chemical inducers, such as isopropyl β-D-thiogalactoside (IPTG). In our study, we designed a novel approach for protein expression by creating a plasmid that responds to copper. This specialized plasmid was engineered through the fusion of a copper-sensing element with an optimized multiple cloning site (MCS) sequence. This MCS sequence can be easily customized by inserting the coding sequences of target recombinant proteins. Once the plasmid was generated, it was introduced into an engineered Escherichia coli strain lacking copA and cueO. With this modified E. coli strain, we demonstrated that the presence of copper ions can efficiently trigger the induction of recombinant protein expression, resulting in the production of active proteins. Most importantly, this expression system can directly utilize copper-containing industrial wastewater as an inducer for protein expression while simultaneously removing copper from the wastewater. Thus, this study provides a low-cost and eco-friendly strategy for the large-scale recombinant protein production. To the best of our knowledge, this is the first report on the induction of recombinant proteins using industrial wastewater.

Discovery of a high-performance phage-derived promoter/repressor system for probiotic lactobacillus engineering

BACKGROUND

The Lactobacillaceae family comprises many species of great importance for the food and healthcare industries, with numerous strains identified as beneficial for humans and used as probiotics. Hence, there is a growing interest in engineering these probiotic bacteria as live biotherapeutics for animals and humans. However, the genetic parts needed to regulate gene expression in these bacteria remain limited compared to model bacteria like E. coli or B. subtilis. To address this deficit, in this study, we selected and tested several bacteriophage-derived genetic parts with the potential to regulate transcription in lactobacilli.

RESULTS

We screened genetic parts from 6 different lactobacilli-infecting phages and identified one promoter/repressor system with unprecedented functionality in Lactiplantibacillus plantarum WCFS1. The phage-derived promoter was found to achieve expression levels nearly 9-fold higher than the previously reported strongest promoter in this strain and the repressor was able to almost completely repress this expression by reducing it nearly 500-fold.

CONCLUSIONS

The new parts and insights gained from their engineering will enhance the genetic programmability of lactobacilli for healthcare and industrial applications.

The enigmatic epitranscriptome of bacteriophages: putative RNA modifications in viral infections

RNA modifications play essential roles in modulating RNA function, stability, and fate across all kingdoms of life. The entirety of the RNA modifications within a cell is defined as the epitranscriptome. While eukaryotic RNA modifications are intensively studied, understanding bacterial RNA modifications remains limited, and knowledge about bacteriophage RNA modifications is almost nonexistent. In this review, we shed light on known mechanisms of bacterial RNA modifications and propose how this knowledge might be extended to bacteriophages. We build hypotheses on enzymes potentially responsible for regulating the epitranscriptome of bacteriophages and their host. This review highlights the exciting prospects of uncovering the unexplored field of bacteriophage epitranscriptomics and its potential role to shape bacteriophage-host interactions.

A Sirtuin-Dependent T7 RNA Polymerase Variant

Transcriptional regulation is of great significance for cells to maintain homeostasis and, meanwhile, represents an innovative but less explored means to control biological processes in synthetic biology and bioengineering. Herein we devised a T7 RNA polymerase (T7RNAP) variant through replacing an essential lysine located in the catalytic core (K631) with Nε-acetyl-l-lysine (AcK) via genetic code expansion. This T7RNAP variant requires the deacetylase activity of NAD-dependent sirtuins to recover its enzymatic activities and thereby sustains sirtuin-dependent transcription of the gene of interest in live cells including bacteria and mammalian cells as well as in in vitro systems. This T7RNAP variant could link gene transcription to sirtuin expression and NAD availability, thus holding promise to support some relevant research.

Target-dependent RNA polymerase as universal platform for gene expression control in response to intracellular molecules

Controlling gene expression in response to specific molecules is an essential technique for regulating cellular functions. However, current platforms with transcription and translation regulators have a limited number of detectable molecules to induce gene expression. Here to address these issues, we present a Target-dependent RNA polymerase (TdRNAP) that can induce RNA transcription in response to the intracellular target specifically recognized by single antibody. By substituting the fused antibody, we demonstrate that TdRNAPs respond to a wide variety of molecules, including peptides, proteins, RNA, and small molecules, and produce desired transcripts in human cells. Furthermore, we show that multiple TdRNAPs can construct orthogonal and multilayer genetic circuits. Finally, we apply TdRNAP to achieve cell-specific genome editing that is autonomously triggered by detecting the target gene product. TdRNAP can expand the molecular variety for controlling gene expression and provide the genetic toolbox for bioengineering and future therapeutic applications.

Development of an Efficient Recombinant Protein Expression System in Clostridium saccharoperbutylacetonicum Based on the Bacteriophage T7 System

Recombinant proteins have broad applications. However, there is a lack of a recombinant protein expression system specifically for large-scale production in anaerobic hosts. Here, we developed a powerful and stringently inducible protein expression system based on the bacteriophage T7 system in the strictly anaerobic solvent-producing Clostridium saccharoperbutylacetonicum. With the integration of a codon optimized T7 RNA polymerase into the chromosome, a single plasmid carrying a T7 promoter could efficiently drive high-level expression of the target gene in an orthogonal manner, which was tightly regulated by a lactose-inducible system. Furthermore, by deleting beta-galactosidase genes involved in lactose metabolism, the transcriptional strength was further improved. In the ultimately optimized strain TM-07, the transcriptional strength of the T7 promoter showed 9.5-fold increase compared to the endogenous strong promoter Pthl. The heterologous NADP+-dependent 3-hydroxybutyryl-CoA dehydrogenase (Hbd1) from C. kluyveri was expressed in TM-07, and the yield of the recombinant protein reached 30.4-42.4% of the total cellular protein, surpassing the strong protein expression systems in other Gram-positive bacteria. The relative activity of Hbd1 in the crude enzyme was 198.0 U/mg, which was 8.3-fold higher than the natural activity in C. kluyveri. The relative activity of the purified enzyme reached 467.4 U/mg. To the best of our knowledge, this study represents the first application of the T7 expression system in Clostridium species, and this optimized expression system holds great potential for large-scale endotoxin-free recombinant protein production under strictly anaerobic conditions. This development paves the way for significant advancements in biotechnology and opens up new avenues for industrial applications.

A Pseudomonas Lysogenic Bacteriophage Crossing the Antarctic and Arctic, Representing a New Genus of Autographiviridae

Polar regions tend to support simple food webs, which are vulnerable to phage-induced gene transfer or microbial death. To further investigate phage-host interactions in polar regions and the potential linkage of phage communities between the two poles, we induced the release of a lysogenic phage, vB_PaeM-G11, from Pseudomonas sp. D3 isolated from the Antarctic, which formed clear phage plaques on the lawn of Pseudomonas sp. G11 isolated from the Arctic. From permafrost metagenomic data of the Arctic tundra, we found the genome with high-similarity to that of vB_PaeM-G11, demonstrating that vB_PaeM-G11 may have a distribution in both the Antarctic and Arctic. Phylogenetic analysis indicated that vB_PaeM-G11 is homologous to five uncultured viruses, and that they may represent a new genus in the Autographiviridae family, named Fildesvirus here. vB_PaeM-G11 was stable in a temperature range (4-40 °C) and pH (4-11), with latent and rise periods of about 40 and 10 min, respectively. This study is the first isolation and characterization study of a Pseudomonas phage distributed in both the Antarctic and Arctic, identifying its lysogenic host and lysis host, and thus provides essential information for further understanding the interaction between polar phages and their hosts and the ecological functions of phages in polar regions.

Assessing the Orthogonality of Phage-Encoded RNA Polymerases for Tailored Synthetic Biology Applications in Pseudomonas Species

The phage T7 RNA polymerase (RNAP) and lysozyme form the basis of the widely used pET expression system for recombinant expression in the biotechnology field and as a tool in microbial synthetic biology. Attempts to transfer this genetic circuitry from Escherichia coli to non-model bacterial organisms with high potential have been restricted by the cytotoxicity of the T7 RNAP in the receiving hosts. We here explore the diversity of T7-like RNAPs mined directly from Pseudomonas phages for implementation in Pseudomonas species, thus relying on the co-evolution and natural adaptation of the system towards its host. By screening and characterizing different viral transcription machinery using a vector-based system in P. putida., we identified a set of four non-toxic phage RNAPs from phages phi15, PPPL-1, Pf-10, and 67PfluR64PP, showing a broad activity range and orthogonality to each other and the T7 RNAP. In addition, we confirmed the transcription start sites of their predicted promoters and improved the stringency of the phage RNAP expression systems by introducing and optimizing phage lysozymes for RNAP inhibition. This set of viral RNAPs expands the adaption of T7-inspired circuitry towards Pseudomonas species and highlights the potential of mining tailored genetic parts and tools from phages for their non-model host.

An Improved Spectrophotometric Method for Toluene-4-Monooxygenase Activity

Monooxygenases, an important class of enzymes, have been the subject of enzyme engineering due to their high activity and versatile substrate scope. Reactions performed by these biocatalysts have long been monitored by a colorimetric method involving the coupling of a dye precursor to naphthalene hydroxylation products generated by the enzyme. Despite the popularity of this method, we found the dye product to be unstable, preventing quantitative readout. By incorporating an extraction step to solubilize the dye produced, we have improved this assay to the point where quantitation of enzyme activity is possible. Further, by incorporating spectral deconvolution, we have, for the first time, enabled independent quantification of the two possible regioisomeric products: 1-naphthol and 2-naphthol. Previously, such analysis was only possible with chromatographic separation, increasing the cost and complexity of analysis. The efficacy of our improved workflow was evaluated by monitoring the activity of a toluene-4-monooxygenase enzyme from Pseudomonas mendocina KR-1. Our colorimetric regioisomer quantification was found to be consistent with chromatographic analysis by HPLC. The development and validation of a quantitative colorimetric assay for monooxygenase activity that enables regioisomeric distinction and quantification represents a significant advance in analytical methods to monitor enzyme activity. By maintaining facile, low-cost, high-throughput readout while incorporating quantification, this assay represents an important alternative to more expensive chromatographic quantification techniques.

Rational design of GDP‑D‑mannose mannosyl hydrolase for microbial L‑fucose production

BACKGROUND

L‑Fucose is a rare sugar that has beneficial biological activities, and its industrial production is mainly achieved with brown algae through acidic/enzymatic fucoidan hydrolysis and a cumbersome purification process. Fucoidan is synthesized through the condensation of a key substance, guanosine 5'‑diphosphate (GDP)‑L‑fucose. Therefore, a more direct approach for biomanufacturing L‑fucose could be the enzymatic degradation of GDP‑L‑fucose. However, no native enzyme is known to efficiently catalyze this reaction. Therefore, it would be a feasible solution to engineering an enzyme with similar function to hydrolyze GDP‑L‑fucose.

RESULTS

Herein, we constructed a de novo L‑fucose synthetic route in Bacillus subtilis by introducing heterologous GDP‑L‑fucose synthesis pathway and engineering GDP‑mannose mannosyl hydrolase (WcaH). WcaH displays a high binding affinity but low catalytic activity for GDP‑L‑fucose, therefore, a substrate simulation‑based structural analysis of the catalytic center was employed for the rational design and mutagenesis of selected positions on WcaH to enhance its GDP‑L‑fucose‑splitting efficiency. Enzyme mutants were evaluated in vivo by inserting them into an artificial metabolic pathway that enabled B. subtilis to yield L‑fucose. WcaH^R36Y/N38R was found to produce 1.6 g/L L‑fucose during shake‑flask growth, which was 67.3% higher than that achieved by wild‑type WcaH. The accumulated L‑fucose concentration in a 5 L bioreactor reached 6.4 g/L.

CONCLUSIONS

In this study, we established a novel microbial engineering platform for the fermentation production of L‑fucose. Additionally, we found an efficient GDP‑mannose mannosyl hydrolase mutant for L‑fucose biosynthesis that directly hydrolyzes GDP‑L‑fucose. The engineered strain system established in this study is expected to provide new solutions for L‑fucose or its high value‑added derivatives production.

Resolving the challenge of insoluble production of mature human growth differentiation factor 9 protein (GDF9) in E. coli using bicistronic expression with thioredoxin

Growth differentiation factor 9 (GDF9) is an oocyte-derived protein with fundamental functions in folliculogenesis. While the crucial contributions of GDF9 in follicular survival have been revealed, crystallographic studies of GDF9 structure have not yet been carried out, essentially due to the insoluble expression of GDF9 in E. coli and lack of appropriate source for structural studies. Therefore, in this study, we investigated the impact of different expression rate of bacterial thioredoxin (TrxA) using bicistronic expression constructs to induce the soluble expression of mature human GDF9 (hGDF9) driven by T7 promoter in E. coli. Our findings revealed that in BL21(DE3), the high rate of TrxA co-expression at 30 °C was sufficiently potent for the soluble expression of hGDF9 and reduction of inclusion body formation by 4 fold. We also successfully confirmed the bioactivity of the purified soluble hGDF9 protein by evaluation of follicle-stimulating hormone receptor gene expression in bovine cumulus cells derived from small follicles. This study is the first to present an effective approach for expression of bioactive form of hGDF9 using TrxA co-expression in E. coli, which may unravel the current issues regarding structural analysis of hGDF9 protein and consequently provide a better insight into hGDF9 functions and interactions.

Transcriptomics-Driven Characterization of LUZ100, a T7-like Pseudomonas Phage with Temperate Features

Autographiviridae is a diverse yet distinct family of bacterial viruses marked by a strictly lytic lifestyle and a generally conserved genome organization. Here, we characterized Pseudomonas aeruginosa phage LUZ100, a distant relative of type phage T7. LUZ100 is a podovirus with a limited host range which likely uses lipopolysaccharide (LPS) as a phage receptor. Interestingly, infection dynamics of LUZ100 indicated moderate adsorption rates and low virulence, hinting at temperate characteristics. This hypothesis was supported by genomic analysis, which showed that LUZ100 shares the conventional T7-like genome organization yet carries key genes associated with a temperate lifestyle. To unravel the peculiar characteristics of LUZ100, ONT-cappable-seq transcriptomics analysis was performed. These data provided a bird's-eye view of the LUZ100 transcriptome and enabled the discovery of key regulatory elements, antisense RNA, and transcriptional unit structures. The transcriptional map of LUZ100 also allowed us to identify new RNA polymerase (RNAP)-promoter pairs that can form the basis for biotechnological parts and tools for new synthetic transcription regulation circuitry. The ONT-cappable-seq data revealed that the LUZ100 integrase and a MarR-like regulator (proposed to be involved in the lytic/lysogeny decision) are actively cotranscribed in an operon. In addition, the presence of a phage-specific promoter transcribing the phage-encoded RNA polymerase raises questions on the regulation of this polymerase and suggests that it is interwoven with the MarR-based regulation. This transcriptomics-driven characterization of LUZ100 supports recent evidence that T7-like phages should not automatically be assumed to have a strictly lytic life cycle. IMPORTANCE Bacteriophage T7, considered the "model phage" of the Autographiviridae family, is marked by a strictly lytic life cycle and conserved genome organization. Recently, novel phages within this clade have emerged which display characteristics associated with a temperate life cycle. Screening for temperate behavior is of utmost importance in fields like phage therapy, where strictly lytic phages are generally required for therapeutic applications. In this study, we applied an omics-driven approach to characterize the T7-like Pseudomonas aeruginosa phage LUZ100. These results led to the identification of actively transcribed lysogeny-associated genes in the phage genome, pointing out that temperate T7-like phages are emerging more frequent than initially thought. In short, the combination of genomics and transcriptomics allowed us to obtain a better understanding of the biology of nonmodel Autographiviridae phages, which can be used to optimize the implementation of phages and their regulatory elements in phage therapy and biotechnological applications, respectively.

Construction and Application of Orthogonal T7 Expression System in Eukaryote: An Overview

The T7 system is an orthogonal transcription-system, which is characterized by simplicity, higher efficiency, and higher processivity, and it is used for protein or mRNA synthesis in various biological-systems. In comparison with prokaryotes, the construction of the T7 expression system is still on-going in eukaryotes, but it shows greatly applicable prospects. In the present paper, development of T7 expression system construction in eukaryotes is reviewed, including its construction in animal (mammalian cells, trypanosomatid protozoa, Xenopus oocytes, zebrafish), plant, and microorganism and its application in vaccine production and gene therapy. In addition, the innate challenges of T7 expression system construction in eukaryote and its potential application in vaccine production and gene therapy are discussed.

Bottom-Up Synthetic Biology Using Cell-Free Protein Synthesis

Technical advances in biotechnology have greatly accelerated the development of bottom-up synthetic biology. Unlike top-down approaches, bottom-up synthetic biology focuses on the construction of a minimal cell from scratch and the application of these principles to solve challenges. Cell-free protein synthesis (CFPS) systems provide minimal machinery for transcription and translation, from either a fractionated cell lysate or individual purified protein elements, thus speeding up the development of synthetic cell projects. In this review, we trace the history of the cell-free technique back to the first in vitro fermentation experiment using yeast cell lysate. Furthermore, we summarized progresses of individual cell mimicry modules, such as compartmentalization, gene expression regulation, energy regeneration and metabolism, growth and division, communication, and motility. Finally, current challenges and future perspectives on the field are outlined.

Modified Nucleotides for Chemical and Enzymatic Synthesis of Therapeutic RNA

In recent years, RNA has emerged as a medium with a broad spectrum of therapeutic potential, however, for years, a group of short RNA fragments was studied and considered therapeutic molecules. In nature, RNA plays both functions, with coding and non-coding potential. For RNA, like any other therapeutic, to be used clinically, certain barriers must be crossed. Among them, there are biocompatibility, relatively low toxicity, bioavailability, increased stability, target efficiency and low off-target effects. In the case of RNA, most of these obstacles can be overcome by incorporating modified nucleotides into its structure. This may be achieved by both, in vitro and in vivo biosynthetic methods, as well as chemical synthesis. Some advantages and disadvantages of each approach are summarized here. The wide range of nucleotide analogues has been tested for their utility as monomers for RNA synthesis. Many of them have been successfully implemented, and a lot of pre-clinical and clinical studies involving modified RNA have been carried out. Some of these medications have already been introduced into clinics. After the huge success of RNA-based vaccines that were introduced into widespread use in 2020, and the introduction to the market of some RNA-based drugs, RNA therapeutics containing modified nucleotides appear to be the future of medicine.

Reprogramming T7RNA Polymerase in Escherichia coli Nissle 1917 under Specific Lac Operon for Efficient p-Coumaric Acid Production

Lac operon is the standard regulator used to control the orthogonality of T7RNA polymerase (T7RNAP) and T7 promoter inEscherichia coli BL21(DE3) strain for protein expression. However,E. coliNissle 1917 (EcN), the unique probiotic strain, has seldom been precisely adapted to the T7 system. Herein, we applied bioinformatics analysis on Lac operon from different strains, and it was observed that a weak promoter for LacI repressor existed in EcN. Furthermore, X-gal assay revealed a strong expression of lacZ in EcN. We demonstrated that Lac operon significantly affected the protein expression in the two T7-derived EcN, in which T7RNAP was integrated at lambda (ET7L) and HK022 (ET7H), respectively. Different combinations of replication origin, chaperonin GroELS, inducer, and medium were explored to fine-tune the best strain with tyrosine ammonia-lyase (TAL) for p-coumaric acid (pCA) production, which is one of the essential bioactive compounds for human health. Finally, the highest pCA conversion of 78.8% was achieved using RRtL (plasmid form) under the optimum condition, and a 51.5% conversion was obtained with L::Rt strain which has integrated T7-RtTAL at HK022 of ET7L in the simulated gut environment. The appropriate reprogramming of T7RNAP expedites EcN as an effective and promising cell factory for live bacterial therapeutics in the future.

Towards T7 RNA polymerase (T7RNAP)-based expression system in yeast: challenges and opportunities

During the last decades, we have witnessed unprecedented advances in biological engineering and synthetic biology. These disciplines aim to take advantage of gene pathway regulation and gene expression in different organisms, to enable cells to perform desired functions. Yeast has been widely utilized as a model for the study of eukaryotic protein expression while bacteriophage T7RNAP and its promoter constitute the preferred system for prokaryotic protein expression (such as pET-based expression systems). The ability to integrate a T7RNAP-based expression system in yeast could allow for a better understanding of gene regulation in eukaryotic cells, and potentially increase the efficiency and processivity of yeast as an expression system. However, the attempts for the creation of such a system have been unsuccessful to date. This review aims to: (i) summarize the efforts that, for many years, have been devoted to the creation of a T7RNAP-based yeast expression system and ii) provide an overview of the latest advances in knowledge of eukaryotic transcription and translation that could lead to the construction of a successful T7RNAP expression system in yeast. The completion of this new expression system would allow to further expand the toolkit of yeast in synthetic biology and ultimately contribute to boost yeast usage as a key cell factory in sustainable biorefinery and circular economy.

Mechanistic Studies of an Automated Lipid Nanoparticle Reveal Critical Pharmaceutical Properties Associated with Enhanced mRNA Functional Delivery In Vitro and In Vivo

Recently, lipid nanoparticles (LNPs) have attracted attention due to their emergent use for COVID-19 mRNA vaccines. The success of LNPs can be attributed to ionizable lipids, which enable functional intracellular delivery. Previously, the authors established an automated high-throughput platform to screen ionizable lipids and identified that the LNPs generated using this automated technique show comparable or increased mRNA functional delivery in vitro as compared to LNPs prepared using traditional microfluidics techniques. In this study, the authors choose one benchmark lipid, DLin-MC3-DMA (MC3), and investigate whether the automated formulation technique can enhance mRNA functional delivery in vivo. Interestingly, a 4.5-fold improvement in mRNA functional delivery in vivo by automated LNPs as compared to LNPs formulated by conventional microfluidics techniques, is observed. Mechanistic studies reveal that particles with large size accommodate more mRNA per LNP, possess more hydrophobic surface, are more hemolytic, bind a larger protein corona, and tend to accumulate more in macropinocytosomes, which may quantitatively benefit mRNA cytosolic delivery. These data suggest that mRNA loading per particle is a critical factor that accounts for the enhanced mRNA functional delivery of automated LNPs. These mechanistic findings provide valuable insight underlying the enhanced mRNA functional delivery to accelerate future mRNA LNP product development.

Highly Reversible Tunable Thermal-Repressible Split-T7 RNA Polymerases (Thermal-T7RNAPs) for Dynamic Gene Regulation

Temperature is a physical cue that is easy to apply, allowing cellular behaviors to be controlled in a contactless and dynamic manner via heat-inducible/repressible systems. However, existing heat-repressible systems are limited in number, rely on thermal sensitive mRNA or transcription factors that function at low temperatures, lack tunability, suffer delays, and are overly complex. To provide an alternative mode of thermal regulation, we developed a library of compact, reversible, and tunable thermal-repressible split-T7 RNA polymerase systems (Thermal-T7RNAPs), which fused temperature-sensitive domains of Tlpa protein with split-T7RNAP to enable direct thermal control of the T7RNAP activity between 30 and 42 °C. We generated a large mutant library with varying thermal performances via an automated screening framework to extend temperature tunability. Lastly, using the mutants, novel thermal logic circuitry was implemented to regulate cell growth and achieve active thermal control of the cell proportions within co-cultures. Overall, this technology expanded avenues for thermal control in biotechnology applications.

Massively parallel characterization of engineered transcript isoforms using direct RNA sequencing

Transcriptional terminators signal where transcribing RNA polymerases (RNAPs) should halt and disassociate from DNA. However, because termination is stochastic, two different forms of transcript could be produced: one ending at the terminator and the other reading through. An ability to control the abundance of these transcript isoforms would offer bioengineers a mechanism to regulate multi-gene constructs at the level of transcription. Here, we explore this possibility by repurposing terminators as 'transcriptional valves' that can tune the proportion of RNAP read-through. Using one-pot combinatorial DNA assembly, we iteratively construct 1780 transcriptional valves for T7 RNAP and show how nanopore-based direct RNA sequencing (dRNA-seq) can be used to characterize entire libraries of valves simultaneously at a nucleotide resolution in vitro and unravel genetic design principles to tune and insulate termination. Finally, we engineer valves for multiplexed regulation of CRISPR guide RNAs. This work provides new avenues for controlling transcription and demonstrates the benefits of long-read sequencing for exploring complex sequence-function landscapes.

Psychrophilic phage VSW-3 RNA polymerase reduces both terminal and full-length dsRNA byproducts in in vitro transcription

RNA research and applications are underpinned by in vitro transcription (IVT), but RNA impurities resulting from the enzymatic reagents severely impede downstream applications. To improve the stability and purity of synthesized RNA, we have characterized a novel single-subunit RNA polymerase (RNAP) encoded by the psychrophilic phage VSW-3 from a plateau lake. The VSW-3 RNAP is capable of carrying out in vitro RNA synthesis at low temperatures (4-25°C). Compared to routinely used T7 RNAP, VSW-3 RNAP provides a similar yield of transcripts but is insensitive to class II transcription terminators and synthesizes RNA without redundant 3'-cis extensions. More importantly, through dot-blot detection with the J2 monoclonal antibody, we found that the RNA products synthesized by VSW-3 RNAP contained a much lower amount of double-stranded RNA byproducts (dsRNA), which are produced by transcription from both directions and are significant in T7 RNAP IVT products. Taken together, the VSW-3 RNAP almost eliminates both terminal loop-back dsRNA and full-length dsRNA in IVT and thus is especially advantageous for producing RNA for in vivo use.

mRNA Therapeutic Modalities Design, Formulation and Manufacturing under Pharma 4.0 Principles

In the quest for a formidable weapon against the SARS-CoV-2 pandemic, mRNA therapeutics have stolen the spotlight. mRNA vaccines are a prime example of the benefits of mRNA approaches towards a broad array of clinical entities and druggable targets. Amongst these benefits is the rapid cycle "from design to production" of an mRNA product compared to their peptide counterparts, the mutability of the production line should another target be chosen, the side-stepping of safety issues posed by DNA therapeutics being permanently integrated into the transfected cell's genome and the controlled precision over the translated peptides. Furthermore, mRNA applications are versatile: apart from vaccines it can be used as a replacement therapy, even to create chimeric antigen receptor T-cells or reprogram somatic cells. Still, the sudden global demand for mRNA has highlighted the shortcomings in its industrial production as well as its formulation, efficacy and applicability. Continuous, smart mRNA manufacturing 4.0 technologies have been recently proposed to address such challenges. In this work, we examine the lab and upscaled production of mRNA therapeutics, the mRNA modifications proposed that increase its efficacy and lower its immunogenicity, the vectors available for delivery and the stability considerations concerning long-term storage.

Immunogenicity of In Vitro-Transcribed RNA

In vitro-transcribed RNAs are emerging as new biologics for therapeutic innovation, as exemplified by their application recently in SARS-CoV-2 vaccinations. RNAs prepared by in vitro transcription (IVT) allow transient expression of proteins of interest, conferring safety over DNA- or virus-mediated gene delivery systems. However, in vitro-transcribed RNAs should be used with caution because of their immunogenicity, which is in part triggered by double-stranded RNA (dsRNA) byproducts during IVT. Cellular innate immune response to dsRNA byproducts can lead to undesirable consequences, including suppression of protein synthesis and cell death, which in turn can detrimentally impact the efficacy of mRNA therapy. Thus, it is critical to understand the nature of IVT byproducts and the mechanisms by which they trigger innate immune responses.Our lab has been investigating the mechanisms by which the innate immune system discriminates between "self" and "nonself" RNA, with the focus on the cytoplasmic dsRNA receptors retinoic acid-inducible gene I (RIG-I) and melanoma differentiation-associated 5 (MDA5). We have biochemically and structurally characterized critical events involving RNA discrimination and signal transduction by RIG-I or MDA5. We have used in vitro-transcribed RNAs as tools to investigate RNA specificity of RIG-I and MDA5, which required optimization of the IVT reaction and purification processes to eliminate the effect of IVT byproducts. In this Account, we summarize our current understanding of RIG-I and MDA5 and IVT reactions and propose future directions for improving IVT as a method to generate both research tools and therapeutics. Other critical proteins in cellular innate immune response to dsRNAs are also discussed. We arrange the contents in the following order: (i) innate immunity sensors for nonself RNA, including the RIG-I-like receptors (RLRs) in the cytosol and the toll-like receptors (TLRs) in the endosome, as well as cytoplasmic dsRNA-responding proteins, including protein kinase R (PKR) and 2',5'-oligoadenylate synthetases (OASes), illustrating the feature of protein-RNA binding and its consequences; (ii) the immunogenicity of IVT byproducts, specifically the generation of dsRNA molecules during IVT; and (iii) methods to reduce IVT RNA immunogenicity, including optimizations of RNA polymerases, reagents, and experimental conditions during IVT and subsequent purification.

A single mutation attenuates both the transcription termination and RNA-dependent RNA polymerase activity of T7 RNA polymerase

Transcription termination is one of the least understood processes of gene expression. As the prototype model for transcription studies, the single-subunit T7 RNA polymerase (RNAP) is known to respond to two types of termination signals, but the mechanism underlying such termination, especially the specific elements of the polymerase involved, is still unclear, due to a lack of knowledge with respect to the structure of the termination complex. Here we applied phage-assisted continuous evolution to obtain variants of T7 RNAP that can bypass the typical class I T7 terminator with stem-loop structure. Through in vivo selection and in vitro characterization, we discovered a single mutation (S43Y) that significantly decreased the termination efficiency of T7 RNAP at all transcription terminators tested. Coincidently, the S43Y mutation almost eliminates the RNA-dependent RNAP (RdRp) activity of T7 RNAP without impeding the major DNA-dependent RNAP (DdRp) activity of the enzyme. S43 is located in a hinge region and regulates the transformation between transcription initiation and elongation of T7 RNAP. Steady-state kinetics analysis and an RNA binding assay indicate that the S43Y mutation increases the transcription efficiency while weakening RNA binding of the enzyme. As an enzymatic reagent for in vitro transcription, the T7 RNAP S43Y mutant reduces the undesired termination in run-off RNA synthesis and produces RNA with higher terminal homogeneity.

Tailoring Genetic Elements of the Plasmid-Driven T7 System for Stable and Robust One-Step Cloning and Protein Expression in Broad Escherichia coli

The plasmid-driven T7 system (PDT7) is a flexible approach to trigger protein overexpression; however, most of the reported PDT7 rely on many auxiliary elements or inducible systems to attenuate the toxicity from the orthogonality of the T7 system, which limits its application as the one-step cloning and protein expression system. In this study, we developed a stable and robust PDT7 via tailoring the genetic elements. By error-prone mutagenesis, a mutated T7RNAP with TTTT insertion conferred a trace but enough amount of T7RNAP for stable and efficient PDT7, denoted as PDT7m. The replication origin was kept at the same level, while the ribosome binding site (RBS) of the T7 promoter was the most contributing factor, thus enhancing the protein expression twofold using PDT7m. For application as a host-independent screening platform, both constitutive and IPTG-inducible PDT7m were constructed. It was found that each strain harnessed different IPTG inducibilities for tailor-made strain selection. Constitutive PDT7m was successfully used to express the homologous protein (i.e., lysine decarboxylase) or heterologous protein (i.e., carbonic anhydrase, CA) as a one-step cloning and protein expression tool to select the best strain for cadaverine (DAP) or CA production, respectively. Additionally, PDT7m is compatible with the pET system for coproduction of DAP and CA simultaneously. Finally, PDT7m was used for in vivo high-end chemical production of aminolevulinic acid (ALA), in which addition of the T7 terminator successfully enhanced 340% ALA titer, thus paving the way to rapidly and effectively screening the superior strain as a cell factory.

Construction of Stable T7 Expression System in Saccharomyces cerevisiae by Improving Nuclear Membrane Permeability with Viroporin HIV-1 Vpu

T7 expression system (T7 RNA polymerase / T7 promoter), derived from T7 bacteriophage, is one of the most extensively used protein expression systems, which is also an enabling tool in synthetic biology. However, in eukaryote, most of T7 expression system is transient expression system. This is mainly due to the absence of post-transcriptional processing of mRNAs transcribed by T7RNAP in eukaryotic cells, so they cannot effectively pass through nuclear membrane and enter cytoplasm. In this study, Saccharomyces cerevisiae was selected as host to construct stable T7 expression system, in which HIV-1 viroporin (Vpu) was used to improve the permeability of nuclear membrane. Results of NanoLuc® (Nluc) luciferase expression indicated that Vpu could effectively promote the transport of T7 transcripts and increase the amount of protein synthesized. The method of using viroporin to improve permeability of the nuclear membrane provides an effective tool for constructing a stable T7 expression system in eukaryote.

Probing steps in DNA transcription using single-molecule methods

Transcriptional regulation is one of the key steps in determining gene expression. Diverse single-molecule techniques have been applied to characterize the stepwise progression of transcription, yielding complementary results. These techniques include, but are not limited to, fluorescence-based microscopy with single or multiple colors, force measuring and manipulating microscopy using magnetic field or light, and atomic force microscopy. Here, we summarize and evaluate these current methodologies in studying and resolving individual steps in the transcription reaction, which encompasses RNA polymerase binding, initiation, elongation, mRNA production, and termination. We also describe the advantages and disadvantages of each method for studying transcription.

Construction of T7-Like Expression System in Pseudomonas putida KT2440 to Enhance the Heterologous Expression Level

Pseudomonas putida KT2440 has become an attractive chassis for heterologous expression with the development of effective genetic manipulation tools. Improving the level of transcriptional regulation is particularly important for extending the potential of P. putida KT2440 in heterologous expression. Although many strategies have been applied to enhance the heterologous expression level in P. putida KT2440, it was still at a relatively low level. Herein we constructed a T7-like expression system in P. putida KT2440, mimicking the pET expression system in Escherichia coli, which consisted of T7-like RNA polymerase (MmP1) integrated strain and the corresponding expression vector for the heterologous expression enhancement. With the optimization of the insertion site and the copy number of RNA polymerase (RNAP), the relative fluorescence intensity (RFI) of the super-folder green fluorescent protein (sfGFP) was improved by 1.4-fold in MmP1 RNAP integrated strain. The induction point and IPTG concentration were also optimized. This strategy was extended to the gene-reduced strain EM42 and the expression of sfGFP was improved by 2.1-fold. The optimal RNAP integration site was also used for introducing T7 RNAP in P. putida KT2440 and the expression level was enhanced, indicating the generality of the integration site for the T7 expression system. Compared to other inducible expression systems in KT2440, the heterologous expression level of the Mmp1 system and T7 system were more than 2.5 times higher. Furthermore, the 3.6-fold enhanced expression level of a difficult-to-express nicotinate dehydrogenase from Comamonas testosteroni JA1 verified the efficiency of the T7-like expression system in P. putida KT2440. Taken together, we constructed and optimized the T7-like and T7 expression system in P. putida, thus providing a set of applicable chassis and corresponding plasmids to improve recombinant expression level, expecting to be used for difficult-to-express proteins.

Plasmid replication based on the T7 origin of replication requires a T7 RNAP variant and inactivation of ribonuclease H

T7 RNA polymerase (RNAP) is a valuable tool in biotechnology, basic research and synthetic biology due to its robust, efficient and selective transcription of genes. Here, we expand the scope of T7 RNAP to include plasmid replication. We present a novel type of plasmid, termed T7 ori plasmids that replicate, in an engineered Escherichia coli, with a T7 phage origin as the sole origin of replication. We find that while the T7 replication proteins; T7 DNA polymerase, T7 single-stranded binding proteins and T7 helicase-primase are dispensable for replication, T7 RNAP is required, although dependent on a T7 RNAP variant with reduced activity. We also find that T7 RNAP-dependent replication of T7 ori plasmids requires the inactivation of cellular ribonuclease H. We show that the system is portable among different plasmid architectures and ribonuclease H-inactivated E. coli strains. Finally, we find that the copy number of T7 ori plasmids can be tuned based on the induction level of RNAP. Altogether, this study assists in the choice of an optimal genetic tool by providing a novel plasmid that requires T7 RNAP for replication.

Charting the landscape of RNA polymerases to unleash their potential in strain improvement

One major mission of microbial cell factory is overproduction of desired chemicals. To this end, it is necessary to orchestrate enzymes that affect metabolic fluxes. However, only modification of a small number of enzymes in most cases cannot maximize desired metabolites, and global regulation is required. Of myriad enzymes influencing global regulation, RNA polymerase (RNAP) may be the most versatile enzyme in biological realm because it not only serves as the workhorse of central dogma but also participates in a plethora of biochemical events. In fact, recent years have witnessed extensive exploitation of RNAPs for phenotypic engineering. While a few impressive reviews showcase the structures and functionalities of RNAPs, this review not only summarizes the state-of-the-art advance in the structures of RNAPs but also points out their enormous potentials in metabolic engineering and synthetic biology. This review aims to provide valuable insights for strain improvement.

Database Study on the Expression and Purification of Membrane Proteins

Membrane proteins are crucial for biological processes, and many of them are important to drug targets. Understanding the three-dimensional structures of membrane proteins are essential to evaluate their bio function and drug design. High-purity membrane proteins are important for structural determination. Membrane proteins have low yields and are difficult to purify because they tend to aggregate. We summarized membrane protein expression systems, vectors, tags, and detergents, which have deposited in the Protein Data Bank (PDB) in recent four-and-a-half years. Escherichia coli is the most expression system for membrane proteins, and HEK293 cells are the most commonly cell lines for human membrane protein expression. The most frequently vectors are pFastBac1 for alpha-helical membrane proteins, pET28a for beta-barrel membrane proteins, and pTRC99a for monotopic membrane proteins. The most used tag for membrane proteins is the 6×His-tag. FLAG commonly used for alpha-helical membrane proteins, Strep and GST for beta-barrel and monotopic membrane proteins, respectively. The detergents and their concentrations used for alpha-helical, beta-barrel, and monotopic membrane proteins are different, and DDM is commonly used for membrane protein purification. It can guide the expression and purification of membrane proteins, thus contributing to their structure and bio function studying.

Development of Host-Orthogonal Genetic Systems for Synthetic Biology

The construction of a host-orthogonal genetic system can not only minimize the impact of host-specific nuances on fine-tuning of gene expression, but also expand cellular functions such as in vivo continuous evolution of genes based on an error-prone DNA polymerase. It represents an emerging powerful approach for making biology easier to engineer. In this review, the recent advances are described on the design of genetic systems that can be stably inherited in the host cells and are responsible for important biological processes including DNA replication, RNA transcription, protein translation, and gene regulation. Their applications in synthetic biology are summarized and the future challenges and opportunities are discussed in developing such systems.

CRISPRi-Mediated NIMPLY Logic Gate for Fine-Tuning the Whole-Cell Sensing toward Simple Urine Glucose Detection

Whole-cell biosensors have been regarded as a prominent alternative to chemical and physical biosensors due to their renewability, environmental friendliness, and biocompatibility. However, there is still a lack of noninvasive measurements of urine glucose, which plays a vital role in monitoring the risk of diabetes in the healthcare system, via whole-cell biosensors. In this study, we characterized a glucose-inducible promoter and further enhanced the sensing performance using three genetic effectors, which encompassed ribozyme regulator (RiboJ), clustered regularly interspaced short palindromic repeat interference (CRISPRi), and plasmid-based T7RNA polymerase (PDT7), to develop the noninvasive glucose biosensor by fluorescent signal. As a result, RiboJ increased dynamic range to 2989 au, but declined signal-to-noise (S/N) to 1.59, while CRISPRi-mediated NIMPLY gate intensified both dynamic range to 5720 au and S/N to 4.58. The use of single PDT7 orthogonal with T7 promoter in cells (i.e., P strain) achieved a 44 180 au of dynamic range with S/N at 3.08. By coupling the PDT7 and NIMPLY-mediated CRISPRi, we constructed an optimum PIGAS strain with the highest S/N value of 4.95. Finally, we adopted the synthetic bacteria into a microdevice to afford an integrative and portable system for daily urine glucose inspection, which would be an alternative approach for medical diagnosis in the future.

Recent advances in chemical modifications of guide RNA, mRNA and donor template for CRISPR-mediated genome editing

The discovery and applications of clustered regularly interspaced short palindromic repeat (CRISPR) systems have revolutionized our ability to track and manipulate specific nucleic acid sequences in many cell types of various organisms. The robustness and simplicity of these platforms have rapidly extended their applications from basic research to the development of therapeutics. However, many hurdles remain on the path to translation of the CRISPR systems to therapeutic applications: efficient delivery, detectable off-target effects, potential immunogenicity, and others. Chemical modifications provide a variety of protection options for guide RNA, Cas9 mRNA and donor templates. For example, chemically modified gRNA demonstrated enhanced on-target editing efficiency, minimized immune response and decreased off-target genome editing. In this review, we summarize the use of chemically modified nucleotides for CRISPR-mediated genome editing and emphasize open questions that remain to be addressed in clinical applications.

Single-pass transcription by T7 RNA polymerase

RNA molecules can be conveniently synthesized in vitro by the T7 RNA polymerase (T7 RNAP). In some experiments, such as cotranscriptional biochemical analyses, continuous synthesis of RNA is not desired. Here, we propose a method for a single-pass transcription that yields a single transcript per template DNA molecule using the T7 RNAP system. We hypothesized that stalling the polymerase downstream from the promoter region and subsequent cleavage of the promoter by a restriction enzyme (to prevent promoter binding by another polymerase) would allow synchronized production of a single transcript per template. The single-pass transcription was verified in two different scenarios: a short self-cleaving ribozyme and a long mRNA. The results show that a controlled single-pass transcription using T7 RNAP allows precise measurement of cotranscriptional ribozyme activity, and this approach will facilitate the study of other kinetic events.

Efficient Overproduction of Active Nitrile Hydratase by Coupling Expression Induction and Enzyme Maturation via Programming a Controllable Cobalt-Responsive Gene Circuit

A robust and portable expression system is of great importance in enzyme production, metabolic engineering, and synthetic biology, which maximizes the performance of the engineered system. In this study, a tailor-made cobalt-induced expression system (CIES) was developed for low-cost and eco-friendly nitrile hydratase (NHase) production. First, the strong promoter P_veg from Bacillus subtilis, the Ni(II)/Co(II) responsive repressor RcnR, and its operator were reorganized to construct a CIES. In this system, the expression of reporter green fluorescent protein (GFP) was specifically triggered by Co(II) over a broad range of concentration. The performance of the cobalt-induced system was evolved to version 2.0 (CIES 2.0) for adaptation to different concentrations of Co(II) through programming a homeostasis system that rebalances cobalt efflux and influx with RcnA and NiCoT, respectively. Harnessing these synthetic platforms, the induced expression of NHase was coupled with enzyme maturation by Co(II) in a synchronizable manner without requiring additional inducers, which is a unique feature relative to other induced systems for production of NHase. The yield of NHase was 111.2 ± 17.9 U/ml using CIES and 114.9 ± 1.4 U/ml using CIES 2.0, which has a producing capability equivalent to that of commonly used isopropyl thiogalactoside (IPTG)-induced systems. In a scale-up system using a 5-L fermenter, the yielded enzymatic activity reached 542.2 ± 42.8 U/ml, suggesting that the designer platform for NHase is readily applied to the industry. The design of CIES in this study not only provided a low-cost and eco-friendly platform to overproduce NHase but also proposed a promising pipeline for development of synthetic platforms for expression of metalloenzymes.

New Insight into Plasmid-Driven T7 RNA Polymerase in Escherichia coli and Use as a Genetic Amplifier for a Biosensor

T7 RNA polymerase (T7RNAP) and T7 promoter are powerful genetic components, thus a plasmid-driven T7 (PDT7) genetic circuit could be broadly applied for synthetic biology. However, the limited knowledge of the toxicity and instability of such a system still restricts its application. Herein, we constructed 16 constitutive genetic circuts of PDT7 and investigated the orthogonal effects in toxicity and instability. The T7 toxicity was elucidated from the construction processes and cell growth characterization, showing the importance of optimal orthogonality for PDT7. Besides, a protein analysis was performed to validate how the T7 system affected cell metabolism and led to the instability. The application of constitutive PDT7 in functional protein expressions, including carbonic anhydrase, lysine decarboxylase, and 5-ALA synthetase was demonstrated. Furthermore, PDT7 working as a genetic amplifier had been designed for E. coli cell-based biosensors, which illustrated the opportunities in the future of PDT7 used in synthetic biology.

Improving CRISPR Genome Editing by Engineering Guide RNAs

CRISPR technology is a two-component gene editing system in which the effector protein induces genetic alterations with the aid of a gene targeting guide RNA. Guide RNA can be produced through chemical synthesis, in vitro transcription, or intracellular transcription. Guide RNAs can be engineered to have chemical modifications, alterations in the spacer length, sequence modifications, fusion of RNA or DNA components, and incorporation of deoxynucleotides. Engineered guide RNA can improve genome editing efficiency and target specificity, regulation of biological toxicity, sensitive and specific molecular imaging, multiplexing, and editing flexibility. Therefore, engineered guide RNA will enable more specific, efficient, and safe gene editing, ultimately improving the clinical benefits of gene therapy.