Lubricious ionic polymer brush functionalised silicone elastomer surfaces

Brushing Up on Cartilage Lubrication: Polyelectrolyte-Enhanced Tribological Rehydration

This study presents new insights into the potential role of polyelectrolyte interfaces in regulating low friction and interstitial fluid pressurization of cartilage. Polymer brushes composed of hydrophilic 3-sulfopropyl methacrylate potassium salt (SPMK) tethered to a PEEK substrate (SPMK-g-PEEK) are a compelling biomimetic solution for interfacing with cartilage, inspired by the natural lubricating biopolyelectrolyte constituents of synovial fluid. These SPMK-g-PEEK surfaces exhibit a hydrated compliant layer approximately 5 μm thick, demonstrating the ability to maintain low friction coefficients (μ ∼ 0.01) across a wide speed range (0.1-200 mm/s) under physiological loads (0.75-1.2 MPa). A novel polyelectrolyte-enhanced tribological rehydration mechanism is elucidated, capable of recovering up to ∼12% cartilage strain and subsequently facilitating cartilage interstitial fluid recovery, under loads ranging from 0.25 to 2.21 MPa. This is attributed to the combined effects of fluid confinement within the contact gap and the enhanced elastohydrodynamic behavior of polymer brushes. Contrary to conventional theories that emphasize interstitial fluid pressurization in regulating cartilage lubrication, this work demonstrates that SPMK-g-PEEK's frictional behavior with cartilage is independent of these factors and provides unabating aqueous lubrication. Polyelectrolyte-enhanced tribological rehydration can occur within a static contact area and operates independently of known mechanisms of cartilage interstitial fluid recovery established for converging or migrating cartilage contacts. These findings challenge existing paradigms, proposing a novel polyelectrolyte-cartilage tribological mechanism not exclusively reliant on interstitial fluid pressurization or cartilage contact geometry. The implications of this research extend to a broader understanding of synovial joint lubrication, offering insights into the development of joint replacement materials that more accurately replicate the natural functionality of cartilage.

Highly lubricious SPMK-g-PEEK implant surfaces to facilitate rehydration of articular cartilage

To enable long lasting osteochondral defect repairs which preserve the native function of synovial joint counter-face, it is essential to develop surfaces which are optimised to support healthy cartilage function by providing a hydrated, low friction and compliant sliding interface. PEEK surfaces were modified using a biocompatible 3-sulfopropyl methacrylate potassium salt (SPMK) through UV photo-polymerisation, resulting in a ∼350 nm thick hydrophilic coating rich in hydrophilic anionic sulfonic acid groups. Characterisation was done through Fourier Transformed Infrared Spectroscopy, Focused Ion Beam Scanning Electron Microscopy, and Water Contact Angle measurements. Using a Bruker UMT TriboLab, bovine cartilage sliding tests were conducted with real-time strain and shear force measurements, comparing untreated PEEK, SPMK functionalised PEEK (SPMK-g-PEEK), and Cobalt Chrome Molybdenum alloy. Tribological tests over 2.5 h at physiological loads (0.75 MPa) revealed that SPMK-g-PEEK maintains low friction (μ< 0.024) and minimises equilibrium strain, significantly reducing forces on the cartilage interface. Post-test analysis showed no notable damage to the cartilage interfacing against the SPMK functionalised surfaces. The application of a constitutive biphasic cartilage model to the experimental strain data reveals that SPMK surfaces increase the interfacial permeability of cartilage in sliding, facilitating fluid and strain recovery. Unlike previous demonstrations of sliding-induced tribological rehydration requiring specific hydrodynamic conditions, the SPMK-g-PEEK introduces a novel mode of tribological rehydration operating at low speeds and in a stationary contact area. SPMK-g-PEEK surfaces provide an enhanced cartilage counter-surface, which provides a highly hydrated and lubricious boundary layer along with supporting biphasic lubrication. Soft polymer surface functionalisation of orthopaedic implant surfaces are a promising approach for minimally invasive synovial joint repair with an enhanced bioinspired polyelectrolyte interface for sliding against cartilage. These hydrophilic surface coatings offer an enabling technology for the next generation of focal cartilage repair and hemiarthroplasty implant surfaces.

Multifunctional, Low Friction, Antimicrobial Approach for Biomaterial Surface Enhancement

Poly(vinyl chloride) (PVC) biomaterials perform a host of life-saving and life-enhancing roles when employed as medical devices within the body. High frictional forces between the device surface and interfacing tissue can, however, lead to a host of complications including tissue damage, inflammation, pain, and infection. We herein describe a versatile surface modification method using multifunctional hydrogel formulations to increase lubricity and prevent common device-related complications. In a clinically relevant model of the urinary tract, simulating the mechanical and biological environments encountered in vivo, coated candidate catheter surfaces demonstrated significantly lower frictional resistance than uncoated PVC, with reductions in coefficient of friction values of more than 300-fold due to hydration of the surface-localized polymer network. Furthermore, this significant lubrication capacity was retained following hydration periods of up to 28 days in artificial urine at pH 6 and pH 9, representing the pH of physiologically normal and infected urine, respectively, and during 200 repeated cycles of applied frictional force. Importantly, the modified surfaces also displayed excellent antibacterial activity, which could be facilely tuned to achieve reductions of 99.8% in adherence of common hospital-acquired pathogens, Staphylococcus aureus and Proteus mirabilis, relative to their uncoated counterparts through incorporation of chlorhexidine in the coating matrix as a model antiseptic. The remarkable, and pH-independent, tribological performance of these lubricious, antibacterial, and highly durable surfaces offers exciting promise for use of this PVC functionalization approach in facilitating smooth and atraumatic insertion and removal of a wide range of medical implants, ultimately maintaining user health and dignity.