1
|
Shrivastava A, Sharma RK. Conversion of lignocellulosic biomass: Production of bioethanol and bioelectricity using wheat straw hydrolysate in electrochemical bioreactor. Heliyon 2023; 9:e12951. [PMID: 36711303 PMCID: PMC9873701 DOI: 10.1016/j.heliyon.2023.e12951] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/10/2022] [Revised: 01/10/2023] [Accepted: 01/10/2023] [Indexed: 01/15/2023] Open
Abstract
The present study evaluated efficiency of wheat straw (WS) hydrolysate obtained through fungal pre-treatment to produce ethanol and electricity in an electrochemical bioreactor. Three white rot fungi Phanerochaete chrysosporium, Phlebia floridensis and Phlebia brevispora were used to degrade WS for hydrolysate preparation, Lignocellulolytic enzyme production was also monitored during the pretreatment. Yeast Pichia fermentans was allowed to ferment all three hydrolysates up to 12 days. The yeast showed maximum electrochemical response as open circuit voltage (0.672 V), current density 542.42 mA m-2, and power density of 65.09 mW m-2 on 12th day in the hydrolysate prepared using Phlebia floridensis. Maximum ethanol production of 9.2% (w/v) was achieved on 7th day with a fermentation efficiency of about 62.1%. Further, the coulombic efficiency improved from 0.06 to 1.46% during 12 days of the experiment. Thus, the results indicated towards the possible conversion of lignocellulosic biomass into bioethanol along with bioelectricity generation.
Collapse
|
2
|
Sonawane JM, Mahadevan R, Pandey A, Greener J. Recent progress in microbial fuel cells using substrates from diverse sources. Heliyon 2022; 8:e12353. [PMID: 36582703 PMCID: PMC9792797 DOI: 10.1016/j.heliyon.2022.e12353] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/09/2022] [Revised: 11/09/2022] [Accepted: 12/07/2022] [Indexed: 12/23/2022] Open
Abstract
Increasing untreated environmental outputs from industry and the rising human population have increased the burden of wastewater and other waste streams on the environment. The most prevalent wastewater treatment methods include the activated sludge process, which requires aeration and is, therefore, energy and cost-intensive. The current trend towards a circular economy facilitates the recovery of waste materials as a resource. Along with the amount, the complexity of wastewater is increasing day by day. Therefore, wastewater treatment processes must be transformed into cost-effective and sustainable methods. Microbial fuel cells (MFCs) use electroactive microbes to extract chemical energy from waste organic molecules to generate electricity via waste treatment. This review focuses use of MFCs as an energy converter using wastewater from various sources. The different substrate sources that are evaluated include industrial, agricultural, domestic, and pharmaceutical types. The article also highlights the effect of operational parameters such as organic load, pH, current, and concentration on the MFC output. The article also covers MFC functioning with respect to the substrate, and the associated performance parameters, such as power generation and wastewater treatment matrices, are given. The review also illustrates the success stories of various MFC configurations. We emphasize the significant measures required to fill in the gaps related to the effect of substrate type on different MFC configurations, identification of microbes for use as biocatalysts, and development of biocathodes for the further improvement of the system. Finally, we shortlisted the best performing substrates based on the maximum current and power, Coulombic efficiency, and chemical oxygen demand removal upon the treatment of substrates in MFCs. This information will guide industries that wish to use MFC technology to treat generated effluent from various processes.
Collapse
Affiliation(s)
- Jayesh M. Sonawane
- Department of Chemical Engineering and Applied Chemistry, University of Toronto M5S 3E5, Canada
- Département de Chimie, Faculté des Sciences et de génie, Université Laval, Québec City, QC, Canada
- Corresponding author.
| | - Radhakrishnan Mahadevan
- Department of Chemical Engineering and Applied Chemistry, University of Toronto M5S 3E5, Canada
| | - Ashok Pandey
- Centre for Innovation and Translational Research, CSIR-Indian Institute of Toxicology Research, Lucknow, 226 001, India
- Centre for Energy and Environmental Sustainability, Lucknow, 226 029, India
| | - Jesse Greener
- Département de Chimie, Faculté des Sciences et de génie, Université Laval, Québec City, QC, Canada
- CHU de Québec, Centre de recherche, Université Laval, 10 rue de l'Espinay, Québec, QC, Canada
- Corresponding author.
| |
Collapse
|
3
|
Wang J, Ren K, Zhu Y, Huang J, Liu S. A Review of Recent Advances in Microbial Fuel Cells: Preparation, Operation, and Application. BIOTECH (BASEL (SWITZERLAND)) 2022; 11:biotech11040044. [PMID: 36278556 PMCID: PMC9589990 DOI: 10.3390/biotech11040044] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/24/2022] [Revised: 09/20/2022] [Accepted: 09/29/2022] [Indexed: 12/07/2022]
Abstract
The microbial fuel cell has been considered a promising alternative to traditional fossil energy. It has great potential in energy production, waste management, and biomass valorization. However, it has several technical issues, such as low power generation efficiency and operational stability. These issues limit the scale-up and commercialization of MFC systems. This review presents the latest progress in microbial community selection and genetic engineering techniques for enhancing microbial electricity production. The summary of substrate selection covers defined substrates and some inexpensive complex substrates, such as wastewater and lignocellulosic biomass materials. In addition, it also includes electrode modification, electron transfer mediator selection, and optimization of operating conditions. The applications of MFC systems introduced in this review involve wastewater treatment, production of value-added products, and biosensors. This review focuses on the crucial process of microbial fuel cells from preparation to application and provides an outlook for their future development.
Collapse
Affiliation(s)
- Jianfei Wang
- Department of Chemical Engineering, SUNY College of Environmental Science and Forestry, Syracuse, NY 13210, USA
| | - Kexin Ren
- Department of Chemical Engineering, SUNY College of Environmental Science and Forestry, Syracuse, NY 13210, USA
| | - Yan Zhu
- Department of Chemical Engineering, SUNY College of Environmental Science and Forestry, Syracuse, NY 13210, USA
| | - Jiaqi Huang
- Department of Chemical Engineering, SUNY College of Environmental Science and Forestry, Syracuse, NY 13210, USA
- The Center for Biotechnology & Interdisciplinary Studies (CBIS), Rensselaer Polytechnic Institute, Troy, NY 12180, USA
| | - Shijie Liu
- Department of Chemical Engineering, SUNY College of Environmental Science and Forestry, Syracuse, NY 13210, USA
- Correspondence:
| |
Collapse
|
4
|
Gul H, Raza W, Lee J, Azam M, Ashraf M, Kim KH. Progress in microbial fuel cell technology for wastewater treatment and energy harvesting. CHEMOSPHERE 2021; 281:130828. [PMID: 34023759 DOI: 10.1016/j.chemosphere.2021.130828] [Citation(s) in RCA: 35] [Impact Index Per Article: 11.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/21/2021] [Revised: 04/17/2021] [Accepted: 05/04/2021] [Indexed: 06/12/2023]
Abstract
The global energy crisis has stimulated the development of various forms of green energy technology such as microbial fuel cells (MFCs) that can be applied synergistically and simultaneously toward wastewater treatment and bioenergy generation. This is because electricigens in wastewater can act as catalysts for destroying organic pollutants to produce bioelectricity through bacterial metabolism. In this review, the factors affecting energy production are discussed to help optimize MFC processes with respect to design (e.g., single, double, stacked, up-flow, sediment, photosynthetic, and microbial electrolysis cells) and operational conditions/parameters (e.g., cell potential, microorganisms, substrate (in wastewater), pH, temperature, salinity, external resistance, and shear stress). The significance of electron transfer mechanisms and microbial metabolism is also described to pursue the maximum generation of power by MFCs. Technically, the generation of power by MFCs is still a significant challenge for real-world applications due to the difficulties in balancing between harvesting efficiency and upscaling of the system. This review summarizes various techniques used for MFC-based energy harvesting systems. This study aims to help narrow such gaps in their practical applications. Further, it is also expected to give insights into the upscaling of MFC technology while assisting environmental scientists to gain a better understanding on this energy harvesting approach.
Collapse
Affiliation(s)
- Hajera Gul
- Department of Chemistry, Shaheed Benazir Bhutto Women University, Peshawar 25000, Pakistan
| | - Waseem Raza
- State Key Laboratory of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology, 116024, PR China
| | - Jechan Lee
- Department of Environmental and Safety Engineering, Ajou University, Suwon, 16499, Republic of Korea
| | - Mudassar Azam
- Institute of Chemical Engineering and Technology, University of the Punjab, Lahore, 54590, Pakistan
| | - Mujtaba Ashraf
- NFC Institute of Engineering & Technology, Department of Chemical Engineering, Khanewal Road Opposite Pak Arab Fertilizers, 60000, Multan, Pakistan
| | - Ki-Hyun Kim
- Department of Civil and Environmental Engineering, Hanyang University, Seoul 04763, Republic of Korea.
| |
Collapse
|
5
|
Bioenergy Potential of Albumin, Acetic Acid, Sucrose, and Blood in Microbial Fuel Cells Treating Synthetic Wastewater. Processes (Basel) 2021. [DOI: 10.3390/pr9081289] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022] Open
Abstract
Microbial fuel cells (MFCs) are a recent biotechnology that can simultaneously produce electricity and treat wastewater. As the nature of industrial wastewater is very complex, and it may contain a variety of substrates—such as carbohydrates, proteins, lipids, etc.—previous investigations dealt with treatment of individual pollutants in MFCs; the potential of acetic acid, sucrose, albumin, blood, and their mixture has rarely been reported. Hence, the current investigation explored the contribution of each substrate, both separately and in mixture. The voltage generation potential, current, and power density of five different substrates—namely, acetic acid, sucrose, albumin, blood, and a mixture of all of the substrates—was tested in a dual-chambered, anaerobic MFC operated at 35 °C. The reaction time of the anaerobic batch mode MFC was 24 h, and each substrate was treated for 7 runs under the same conditions. The dual-chambered MFC consisted of anode and cathode chambers; the anode chamber contained the biocatalyst (sludge), while the cathode chamber contained the oxidizing material (KMnO4). The maximum voltage of 769 mV was generated by acetic acid, while its corresponding values of current and power density were 7.69 mA and 347.85 mW, respectively. Similarly, being a simple and readily oxidizable substrate, acetic acid exhibited the highest COD removal efficiency (85%) and highest Coulombic efficiency (72%) per run. The anode accepted the highest number of electrons (0.078 mmol/L) when acetic acid was used as a substrate. The voltage, current, and power density generated were found to be directly proportional to COD concentration. The least voltage (61 mV), current (0.61 mA), and power density (2.18 mW) were observed when blood was treated in the MFC. Further research should be focused on testing the interaction of two or more substrates simultaneously in the MFC.
Collapse
|
6
|
Cebecioglu R, Akagunduz D, Catal T. Hydrogen production in single-chamber microbial electrolysis cells using Ponceau S dye. 3 Biotech 2021; 11:27. [PMID: 33442525 DOI: 10.1007/s13205-020-02563-0] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/27/2020] [Accepted: 11/19/2020] [Indexed: 12/19/2022] Open
Abstract
In this study, Ponceau S dye, which is one of the hazardous dyes found in industrial wastewater, was examined for hydrogen production in single chamber-free membrane-free microbial electrolysis cells at different concentrations (10-40 mg L-1). A gas content analysis (hydrogen, carbon dioxide, and methane) was measured daily using gas chromatography to determine the effects of the Ponceau S on hydrogen production levels. Hydrogen was successfully produced in the presence of Ponceau S dye, but the gas production levels were affected by the concentrations of Ponceau S. The maximum hydrogen production was measured as 18 mL at a concentration level of 20 mg L-1. Decolorization ratios of Ponceau S were in the range of 85-100%. Hydrogen production rates increased in the presence of Ponceau S (20 mg L-1); however, yield (%) of the production decreased when compared to the control group. The percentage of COD removal was 94.78% in the presence of 40 mg L-1 of Ponceau S. In conclusion, hydrogen can be generated using wastewaters contaminated with azo dyes such as Ponceau S, and decolorization of the dye can be achieved, simultaneously.
Collapse
Affiliation(s)
- Rumeysa Cebecioglu
- Istanbul Protein Research-Application and Inovation Center (PROMER), Istanbul, Turkey
| | - Dilan Akagunduz
- Istanbul Protein Research-Application and Inovation Center (PROMER), Istanbul, Turkey
| | - Tunc Catal
- Istanbul Protein Research-Application and Inovation Center (PROMER), Istanbul, Turkey
- Department of Molecular Biology and Genetics, Uskudar University, 34662 Uskudar, Istanbul, Turkey
| |
Collapse
|
7
|
|
8
|
|
9
|
Ebadinezhad B, Ebrahimi S, Shokrkar H. Evaluation of microbial fuel cell performance utilizing sequential batch feeding of different substrates. J Electroanal Chem (Lausanne) 2019. [DOI: 10.1016/j.jelechem.2019.02.004] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
|