Physiochemical characterization of taste masking levetiracetam ion exchange resinates in the solid state and formulation of stable liquid suspension for pediatric use

Palatable Levocetirizine Dihydrochloride Solid Dispersed Fast-Dissolving Films: Formulation and In Vitro and In Vivo Characterization

One of the most important issues for bitter-tasting drugs such as levocetirizine dihydrochloride (LCD) is the production of palatable dosage forms. LCD also has a delayed onset of action following oral administration. In this study, solid dispersed fast-dissolving films (FDFs) of LCD using the solvent casting method for oral application were prepared and evaluated. The FDF is composed of HPMC as the film forming polymer and different types of superdisintegrants (sodium starch glycolate, croscarmellose sodium, or crospovidone). FDF containing crospovidone showed the highest percentage release of the drug (100.54% ± 1.47 within 3 min.) and was chosen for fabricating into palatable solid dispersed FDFs using different ratios of gelatine. The results of Raman and FTIR revealed that the drug's crystalline structure has been disrupted, and the drug has intermolecular hydrogen bonds with gelatine. The solid dispersed FDF (LF-7), which contained the drug in the form of a 1 : 1 solid dispersion with gelatine, showed a rapid in vitro disintegration (25 seconds) and a burst release of the drug (99.22% ± 2.22 within one min). The in vivo studies were conducted on human participants and showed a significant (p < 0.05) reduction in disintegration time (9.43 ± 2.16 sec.) and higher taste masking ability of the solid dispersed FDF (LF-7) compared to the nonsolid dispersed FDF (LF-4). The stability studies indicated that the prepared FDF remained stable over three months. Overall, FDFs of levocetirizine dihydrochloride with a palatable and rapid onset of action were developed to relieve allergic symptoms.

Investigation of Chloroquine Resinate Feasibility and In Vitro Taste Masking Evaluation for Pediatric Formulations

In this study, chloroquine resinates were prepared at a 1:1 (w:w) drug-to-resin ratio using the batch method with polacrilex (PC), sodium polystyrene sulfonate (SPS), and polacrilin potassium (PP) ion exchange resins (IER). The influence of drug/resin ratio and pH of the medium on drug loading efficiency was explored. UV-VIS spectrophotometric analysis showed that SPS resin had high loading efficiency for chloroquine diphosphate (CLP), above 89%, regardless of the pH. PP resin was more effective at pH 5.0 (90.68%) than at pH 1.0 (2.09%), and PC resin had only 27.63% of CLP loading efficiency. CLP complexation with IER yielded amorphous mixtures according to results from differential scanning calorimetry (DSC) and X-ray powder diffraction (XRPD), thus indicating drug-resin interaction. The taste masking efficiency was evaluated with in vitro methods using an adapted dissolution test and an electronic tongue system. During dissolution tests, SPS released only 1.0% of CLP after 300 s, while PP released over 10% after 90 s in simulated saliva solution. The electronic tongue distinguished the samples containing CLP, resins, and resinates by using multidimensional projection techniques that indicated an effective drug taste masking. In an accelerated stability study, the drug contents did not decrease in chloroquine resinates, and there was no physical degradation of the resinates after 60 days. Using chloroquine resinates therefore represents a novel way to evaluate taste masking in vitro which is relevant for the early formulation development process.

Application of response surface methodology (RSM) in statistical optimization and pharmaceutical characterization of a patient compliance effervescent tablet formulation of an antiepileptic drug levetiracetam

Background

The main objective of the present study was to develop and optimize an effervescent tablet of levetiracetam, an antiepileptic drug, using central composite design with response surface methodology (RSM).The present investigation helps to overcome the problem associated with levetiracetam tablets and liquid dosage forms with children and elderly people like bad taste and swallowing difficulties. It also facilitates as an alternative manufacturing process for advanced patented technology like 3D printing process employed in SPRITAM® tablet.

Levetiracetam effervescent tablets were prepared by dry granulation (roll compaction) method using water-soluble excipients and optimized by central composite rotatable design (CCRD) using two variables (citric acid and effersoda) at two levels (high and low). Overall, fourteen formulation trials were generated through statistical software Minitab 17.3.0 placing 6 center points, 4 cube points, and 4 axial points. All formulations were subjected to compression using single punch machine.

Results

Quality attributes of compressed tablets were evaluated using various compendial and non-compendial tests. RSM was used to observe the responses like effervescent time, hardness, and friability of the prepared tablet batches for different levels of all the variables. Polynomial equations were developed, and model plots (contour plot and 3-dimensional model surface plots) were generated to study the impact of acid-base couple on the responses. Finally, the optimized formulation was selected on the basis of desired effervescent time, hardness, friability, percent drug release, and drug content. From the studied RSM design, it was observed that small changes in the independent variables (citric acid and effersoda) correlate with shifts in the dependent variables, i.e., the desired responses. The study reveals that all the independent variables (citric acid and effersoda) and dependent variables (effervescent time, hardness, and friability) have a good correlation as indicated by good linear regression coefficient of 0.9808, 0.9939, and 0.9892 for effervescent time, hardness, and friability respectively.

Conclusion

Levetiracetam effervescent tablets are satisfactorily prepared by dry granulation (roll compaction) approach. All desired critical quality attributes were found to be satisfactory. The applicability of RSM with desirability function in optimizing the levetiracetam formulation has made it possible to identify the impact of various independent variables and explore their effect on required responses.

Development of medicated chewing gum of taste masked levocetirizine dihydrochloride using different gum bases: in vitro and in vivo evaluation

Objective: The aim of this study was to develop medicated chewing gum (MCG) formulation for taste-masked levocetirizine dihydrochloride (LCZ) that can provide fast drug release into the salivary fluid.Methods: Taste-masked LCZ was first prepared by two methods: cyclodextrin complexation using Kleptose or Captisol and formation of drug resin complex using Kyron T-154 or Kyron T-314 to overcome poor LCZ palatability. MCGs were then prepared using the taste-masked drug, gum base (Artica-T, Chicle, or Health In Gum (HIG), plasticizer (glycerol or soy lecithin at 6 or 8% of the final gum weight). The developed MCGs were evaluated for physical properties, content uniformity, and drug release. Best release MCGs were evaluated thermally to investigate the plasticizer effectiveness and for ex vivo chew out study to confirm adequate drug release. Drug bioavailability was determined for selected formula compared to commercial tablets.Results: Based on taste-masking efficiency, drug/Kleptose complex (1:3 molar ratio) was chosen for incorporation into chewing gums. Physical properties and drug release showed that gum base type, plasticizer type, and level affected not only physical properties but also drug release from MCGs. Thermal study showed decreased glass transition temperature (Tg) with increased plasticizer level. Chew out study confirmed almost complete drug release after a few minutes of chewing. Pharmacokinetic results showed shorter t_max (0.585 vs. 1.375 h) and higher C_max (0.113 vs. 0.0765 μg/mL) for MCGs than conventional tablets.Conclusion: Results provided evidence that MCGs could be a better alternative to conventional tablet formulations with improved bioavailability and enhanced palatability.

Oral sustained-release suspension based on a lauryl sulfate salt/complex

The objective of this study was to evaluate the feasibility of lauryl sulfate (LS) salt/complex as a novel carrier in oral sustained-release suspensions. Mirabegron, which has a pH-dependent solubility, was selected as the model drug. Sodium lauryl sulfate (SLS) was bound to mirabegron in a stoichiometric manner to form an LS salt/complex. LS salt/complex formulation significantly reduced the solubility of mirabegron and helped mirabegron achieve sustained-release over a wide range of pH conditions. Microparticles containing the LS salt/complex were prepared by spray drying with the aqueous dispersion of ethylcellulose (Aquacoat^® ECD). The diameter of the microparticles was less than 200μm, which will help avoid a gritty taste. In vitro results indicated the microparticles had slower dissolution profiles than the LS salt/complex. The dissolution rate could be controlled flexibly by changing the amount of Aquacoat^® ECD. The microparticle suspension retained the desired sustained-release property and dissolution profile after being stored for 30days at 40°C. In addition, the suspension displayed sustained-release behavior in dogs without a pronounced C_max peak, which will help prevent side effects. These results suggest that microparticles containing LS salt/complex may be useful as a novel sustained-release suspension for oral delivery.