Processed bovine dentine as a bone substitute

The Use of Human Sterilized Crushed Tooth Particles Compared with BTCP Biomaterial and Empty Defects in Bone Formation inside Critical Rabbit Calvaria Sites

This study aimed to assess the bone regeneration of critical-size defects in rabbit calvaria filled with freshly crushed extracted teeth, comparing them with BTCP biomaterial and empty sites. Materials and methods: Twenty-one female New Zealand rabbits were used in this study. Two critical-size defects 6 mm in size were created in the skull bone, each with a 3 mm separation between them. Three experimental groups were evaluated: Group A (human sterilized crushed teeth granules alone), Group B (Bioner Bone, Bioner Sitemas Implantológicos), and Group C (unfilled defects). The animals were sacrificed at 4 and 8 weeks. Evaluation of the samples involved histological and histomorphometric analyses with radiographic evaluation. The histological evaluation showed a higher volume reduction in Group A compared with Group B (p < 0.05) and Control. Group A showed the highest values for cortical closure and bone formation around the particles, followed by Group B and Group C (p < 0.05). Within the limitations of this animal study, we can conclude that the use of human tooth particles leads to increased bone formation and reduced connective tissue in critical-size defects in rabbit calvaria when compared to BTCP biomaterial. The calvarial model is a robust base for the evaluation of different biomaterials.

Dentin, Dentin Graft, and Bone Graft: Microscopic and Spectroscopic Analysis

BACKGROUND

The use of the human dentin matrix could serve as an alternative to autologous, allogenic, and xenogeneic bone grafts. Since 1967, when the osteoinductive characteristics of autogenous demineralized dentin matrix were revealed, autologous tooth grafts have been advocated. The tooth is very similar to the bone and contains many growth factors. The purpose of the present study is to evaluate the similarities and differences between the three samples (dentin, demineralized dentin, and alveolar cortical bone) with the aim of demonstrating that the demineralized dentin can be considered in regenerative surgery as an alternative to the autologous bone.

METHODS

This in vitro study analyzed the biochemical characterizations of 11 dentin granules (Group A), 11 demineralized using the Tooth Transformer (Group B), and dentin granules and 11 cortical bone granules (Group C) using scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) to evaluate mineral content. Atomic percentages of C (carbon), O (oxygen), Ca (calcium), and P (phosphorus) were individually analyzed and compared by the statistical t-test.

RESULTS

The significant p-value (p < 0.05) between group A and group C indicated that these two groups were not significantly similar, while the non-significant result (p > 0.05) obtained between group B and group C indicated that these two groups are similar.

CONCLUSIONS

The findings support that the hypothesis that the demineralization process can lead to the dentin being remarkably similar to the natural bone in terms of their surface chemical composition. The demineralized dentin can therefore be considered an alternative to the autologous bone in regenerative surgery.

Autologous Tooth Graft: Innovative Biomaterial for Bone Regeneration. Tooth Transformer® and the Role of Microbiota in Regenerative Dentistry. A Systematic Review

Different biomaterials, from synthetic products to autologous or heterologous grafts, have been suggested for the preservation and regeneration of bone. The aim of this study is to evaluate the effectiveness of autologous tooth as a grafting material and examine the properties of this material and its interactions with bone metabolism. PubMed, Scopus, Cochrane Library, and Web of Science were searched to find articles addressing our topic published from 1 January 2012 up to 22 November 2022, and a total of 1516 studies were identified. Eighteen papers in all were considered in this review for qualitative analysis. Demineralized dentin can be used as a graft material, since it shows high cell compatibility and promotes rapid bone regeneration by striking an ideal balance between bone resorption and production; it also has several benefits, such as quick recovery times, high-quality newly formed bone, low costs, no risk of disease transmission, the ability to be performed as an outpatient procedure, and no donor-related postoperative complications. Demineralization is a crucial step in the tooth treatment process, which includes cleaning, grinding, and demineralization. Since the presence of hydroxyapatite crystals prevents the release of growth factors, demineralization is essential for effective regenerative surgery. Even though the relationship between the bone system and dysbiosis has not yet been fully explored, this study highlights an association between bone and gut microbes. The creation of additional scientific studies to build upon and enhance the findings of this study should be a future objective of scientific research.

Biocompatibility of mesoporous SBA-16/hydroxyapatite nanocomposite and dentin demineralized particles on human dental pulp stem cells

In the present work, a biomaterial (SBA-16/HA) based on the growth of hydroxyapatite (HA) particles within an organized silica structure SBA-16 (Santa Barbara Amorphous-16) was developed to evaluate its application to act as a porous microenvironment promoting attachment and viability of human dental pulp stem cells of healthy deciduous teeth (SHED). First, SHED were isolated and their phenotypes were evaluated by flow cytometry. The samples of SBA-16/HA were characterized by X-ray diffraction (XRD), small and wide angle X-ray scattering (SWAXS), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) equipped with energy dispersive spectra detector (EDS). Afterward, cells were cultured in the eluates of the above-mentioned biomaterial aged for 24 hr, 7. and 14 days. Bio-Oss® and dentin particles are involved for comparison and cells are cultured in the eluates of these two materials also. Thiazolyl Blue Tetrazolium bromide assay-MTT (3-(4,5-Dimethylthiazol-2-yl)-2,5-Diphenyltetrazolium Bromide assay) was used for the determination of cell viability. The results obtained by all aforementioned characterization methods of SBA-16/HA, revealed a uniform spherical mesoporous structure, an intrinsic characteristic of this material. This material displayed excellent biocompatibility on SHEDs, and even proliferative potential, indicating that SBA-16/HA could potentially serve as a suitable substrate for bone regeneration. Contrary to SBA-16/HA, dentin particles showed low cytotoxicity at all time points, compared to control and Bio-Oss®groups. Our results substantiate the idea that SBA-16/HA has a beneficial effect on SHEDs, thus paving the way toward developing new material for bone replacement.

Physicochemical and Morphological Characterization of Dentin from Deciduous and Permanent Teeth Processed by Different Methods for Tissue Regeneration

The composition of autogenous dentin differs from that of extracted deciduous and permanent teeth, as graft material must undergo procedures prior to implantation. The aim of this study was to characterize the physicochemical and morphological properties of dentin from deciduous (DTs) and permanent teeth (PTs) that had been demineralized (DMA), deproteinized (DPA), and decellularized (DSA). The dentin particles were DMA with ethylenediaminetetraacetic acid (EDTA), DPA with isopropanol, and DSA with sodium dodecyl sulfate (SDS). Sound dentin (SD) was used as the control group. Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared (FTIR) and X-ray diffraction (XRD) were used to examine the surface and physicochemical properties of the dentin. DMA and DPA dentin had lower concentrations of calcium and protein respectively than SD, showing a significant difference compared with DMA and DPA dentin from DTs and PTs (p < 0.05). In the DSA dentin, it was possible to eliminate the cellular residues of dentin from DTs and PTs, and the gene GAPDH was not expressed. The results of FTIR and XRD revealed a different physicochemical composition according to the dentin processing. EDS demonstrated that DMA dentin obtained the lowest values of calcium and phosphate, and the micrographs obtained by SEM exhibited a porous matrix structure in DMA dentin to a greater degree than in DPA or DSA dentin. The physicochemical properties and morphology of dentin as an autograft material differ depending on whether the teeth are deciduous or permanent; the processing method conditions the characteristics of the dentin substrate as a matrix for tissue regeneration.

Autogenous Mineralized Dentin versus Xenograft granules in Ridge Preservation for Delayed Implantation in Post-extraction Sites: A Randomized controlled clinical trial with an 18 months follow-up

OBJECTIVES

To test primary stability of delayed implants placed in post-extraction ridges preserved with autogenous mineralized dentin matrix (MDM) versus xenograft granules. Clinical, histological and pain experience outcomes were further assessed.

MATERIAL AND METHODS

From March 2018 to July 2020, patients requiring ridge preservation in preparation for delayed implant placement in post-extraction sites were included. Participants were randomly allocated to either the test (MDM) or control group (xenograft granules) prior to ridge preservation. Visual analogue scale and analgesic consumption were measured every day for a week. Six months after preservation, trephine cores were harvested for histomorphometry prior to implant placement. Implants were then placed, and implant stability was measured immediately as well as two months after placement. Marginal bone loss and presence of mucositis/peri-implantitis were registered up to 18 months after prosthetic loading.

RESULTS

Fifty-two patients (66 implants) completed the study. MDM and xenograft groups presented similar primary (77.1 ± 6.9 versus. 77.0 versus. 5.9) and secondary (81.8 ± 5.1 versus. 80.1 ± 3.8) implant stabilities. The percentage of newly formed bone in MDM (47.3%) was significantly higher than xenograft (34.9%) (p < .001), and the proportion of residual graft was significantly lower (12.2% in MDM and 22.1% in xenograft) (p < .001). No significant differences were found as far as clinical, radiographic and patient-related outcomes.

CONCLUSIONS

Implants placed in sites preserved with MDM had similar primary stability in comparison to xenograft granules. MDM showed a significantly higher quantity of newly formed bone and lower amount of residual graft in histomorphometry results and equal clinical and patient-related outcomes.

Histological evaluation of the regenerative potential of a novel treated dentin matrix hydrogel in direct pulp capping

OBJECTIVES

To produce a novel injectable treated dentin matrix hydrogel (TDMH) to be used as a novel pulp-capping agent for dentin regeneration compared with Biodentine and MTA.

MATERIALS AND METHODS

Thirty intact fully erupted premolars scheduled to be extracted for orthodontic reasons were included. Pulps were mechanically exposed in the middle of the cavity floor. TDMH was composed of TDM powder (500-μm particle size) and sodium alginate as an injectable scaffold. The capped teeth were divided into three equal groups (n = 10): TDMH, Biodentine, and MTA respectively. Clinical examination and assessment of periapical response were performed. The teeth were extracted after 2-weeks and 2-month intervals, stained with hematoxylin-eosin, and categorized by using a histologic scoring system. Statistical analysis was performed using chi-square and Kruskal-Wallis test (p = 0.05).

RESULTS

All teeth were vital during observation periods. Histological analysis after 2 months showed complete dentin bridge formation and absence of inflammatory pulp response with no significant differences between groups. However, the formed dentin was significantly thicker with the TDMH group with layers of well-arranged odontoblasts that were found to form a homogenous tubular structure with numerous dentinal tubule lines showing a positive trend to dentin regeneration.

CONCLUSIONS

TDMH could achieve dentin regeneration and conservation of pulp vitality and might serve as a feasible natural substitute for silicate-based cements in restoring in vivo dentin defect in direct pulp-capping procedure.

TRIAL REGISTRATION

PACTR201901866476410.

Biomodification of a Class-V Restorative Material by Incorporation of Bioactive Agents

Restoring subgingival class-V cavities successfully, demand special biological properties from a restorative material. This study aimed to assess the effects of incorporating bioactive materials to glass ionomer cement (GIC) on its mechanical and biological properties. Hydroxyapatite, chitosan, chondroitin sulphate, bioglass, gelatine and processed bovine dentin were incorporated into a GIC restorative material. Compressive strength, biaxial flexural strength (BFS), hardness, setting and working time measurements were investigated. Biocompatibility of the new materials was assessed using both monolayer cell cultures of normal oral fibroblasts (NOF) and TR146 keratinocytes, and a 3D-tissue engineered human oral mucosa model (3D-OMM) using presto-blue tissue viability assay and histological examination. Significant reduction in the compressive strength and BFS of gelatine-modified discs was observed, while chondroitin sulphate-modified discs had reduced BFS only (p value > 0.05). For hardness, working and setting times, only bioglass caused significant increase in the working time. NOF viability was significantly increased when exposed to GIC-modified with bovine dentine, bioglass and chitosan. Histological examination showed curling and growth of the epithelial layer toward the disc space, except for the GIC modified with gelatine. This study has highlighted the potential for clinical application of the modified GICs with hydroxyapatite, chitosan, bioglass and bovine dentine in subgingival class-V restorations.

Combining autologous particulate dentin, L-PRF, and fibrinogen to create a matrix for predictable ridge preservation: a pilot clinical study

OBJECTIVES

The aim of this study was to describe the histological and clinical outcome of "dentin block" (a mixture of autologous particulate dentin, leukocyte- and platelet-rich fibrin (L-PRF), and liquid fibrinogen) in alveolar ridge preservation.

MATERIAL AND METHODS

Ten extraction sockets were grafted with "dentin block," a mixture of particulate autologous dentin with chopped leukocyte-platelet-rich fibrin (L-PRF) membranes at a 1:1 ratio, and liquid fibrinogen as a binder. Two grafted sites were followed at 4 and 5 months, and 6 sites at 6 months. Biopsies were taken from the core of the grafted site for histologic and histo-morphometric analysis.

RESULTS

All patients completed the study without any adverse event. The vertical and horizontal dimensions of the alveolar ridge were preserved or even increased after 4, 5, or 6 months and remained stable after 6 months of the implant placement. The histological examination revealed a median relative percentage of bone, dentin, and connective tissue of 57.0, 0.9, and 39.3%, respectively. A comparison of samples at different time points (4, 5, and 6 months) showed a progressive increase in the proportion of bone with a decrease in the proportion of dentin. The bone was compact with normal osteocytes and moderate osteoblastic activity. In 4 out of 10 samples, no dentin was observed; in the other samples, it represented 1-5% (with geometric fragments).

CONCLUSIONS

Dentin block showed to be a suitable bone substitute in an alveolar ridges preservation model.

CLINICAL RELEVANCE

The promising results of dentin block as a bone substitute in alveolar ridge preservation could have an important clinical impact considering this biomaterial brings together the regenerative potential of three autologous products with excellent biological and clinical behavior, low risk of adverse effects, and feasible acquisition.

BMP-2 and type I collagen preservation in human deciduous teeth after demineralization

BACKGROUND

Great interest has recently been focused on tooth and tooth derivatives as suitable substrates for the treatment of alveolar bone defects. Here, we propose the use of demineralized baby teeth (BT) as potential grafting materials for bone augmentation procedures.

METHODS

Particles of human BT (Ø < 1 mm) were demineralized by means of a chemical/thermal treatment. Demineralized BT particles were thoroughly characterized by scanning electron microscopy/energy dispersive X-ray analyses to evaluate the effects of the demineralization on BT topography and mineral phase composition, and by enzyme-linked immunosorbent assays (ELISA) to quantify collagen and bone morphogenetic protein-2 (BMP-2) protein contents. The response of SAOS-2 cells to exogenous BMP-2 stimulation was evaluated to identify the minimum BMP-2 concentration able to induce osteodifferentiation in vitro (alkaline phosphatase (ALP) activity).

RESULTS

The demineralization treatment led to a dramatic decrease in relative Ca and P content (%) of ≈75% with respect to the native BT particles, while preserving native protein conformation and activity. Interestingly, the demineralization process led to a rise in the bioavailability of BMP-2 in BT particles, as compared to the untreated counterparts. The BMP-2 content found in demineralized BT was also proved to be very effective in enhancing ALP activity, thus in the osteodifferentiation of SAOS-2 cells in vitro, as confirmed by cell experiments performed upon exogenously added BMP-2.

CONCLUSIONS

In this study we demonstrate that the BMP-2 content found in demineralized BT is very effective in inducing cell osteodifferentiation, and strengthens the idea that BTs are very attractive bioactive materials for bone-grafting procedures.

Bone regeneration using composite non-demineralized xenogenic dentin with beta-tricalcium phosphate in experimental alveolar cleft repair in a rabbit model

Background

Alveolar cleft repair is performed via bone grafting procedure to restore the dental arch continuity. A suitable bone substitute materials should possess osteoinductive and osteoconductive properties, to promote new bone formation, along with a slowly resorbable scaffold that is subsequently replaced with functionally viable bone. Calcium phosphate biomaterials have long proved their efficacy as bone replacement materials. Dentin in several forms has also demonstrated its possibility to be used as bone graft replacement material in several studies. The purpose of this study was to evaluate bone regeneration pattern and quantify bone formation after grafting pre-established experimental alveolar clefts defects model in rabbits using composite xenogenic dentin and β-TCP in comparison to β-TCP alone.

Methods

Unilateral alveolar cleft defects were created in 16 New Zealand rabbits according to previously described methodology. Alveolar clefts were allowed 8 weeks healing period. 8 defects were filled with β-TCP, whereas 8 defects filled with composite xenogenic dentin with β-TCP. Bone regeneration of the healed defects was compared at the 8 weeks after intervention. Quantification of bone formation was analyzed using micro-computed tomography (µCT) and histomorphometric analysis.

Results

µCT and histomorphometric analysis revealed that defects filled with composite dentin/β-TCP showed statistically higher bone volume fraction, bone mineral density and percentage residual graft volume when compared to β-TCP alone. An improved surgical handling of the composite dentin/β-TCP graft was also noted.

Conclusions

Composite xenogenic dentin/β-TCP putty expresses enhanced bone regeneration compared to β-TCP alone in the reconstruction of rabbit alveolar clefts defects.

Demineralized dentin and enamel matrices as suitable substrates for bone regeneration

Background

In recent decades, tooth derivatives such as dentin (D) and enamel (E) have been considered as potential graft biomaterials to treat bone defects. This study aimed to investigate the effects of demineralization on the physical-chemical and biological behavior of D and E.

Methods

Human D and E were minced into particles (Ø<1 mm), demineralized and sterilized. Thorough physical-chemical and biochemical characterizations of native and demineralized materials were performed by SEM and EDS analysis and ELISA kits to determine mineral, collagen type I and BMP-2 contents. In addition, MG63 and SAOS-2 cells were seeded on tooth-derived materials and Bio-Oss®, and a comparison of cell responses in terms of adhesion and proliferation was carried out.

Results

The sterilization process, as a combination of chemical and thermal treatments, was found to be effective for all materials. On the other hand, D demineralization allowed preserving the collagen content, while increasing BMP-2 bioavailability. D and demineralized D (dD) displayed excellent biocompatibility, even greater than Bio-Oss®. Conversely, the high mineral content displayed by E, as confirmed by EDS analysis, inhibited cell proliferation. Of note, even though the demineralization process was somehow less effective in E than in D, demineralized E (dE) displayed increased BMP-2 bioavailability and improved performance in vitro compared with native E.

Conclusions

Our results substantiate the idea that the demineralization process lead to an increase of BMP-2 bioavailability, thus paving the way toward development of more effective, osteoinductive tooth-derived materials for bone regeneration and replacement.

Demineralized dentin matrix scaffolds for alveolar bone engineering

From the point of view of implant dentistry, this review discusses the development and clinical use of demineralized dentin matrix (DDM) scaffolds, produced from the patient's own extracted teeth, to repair alveolar bone defects. The structure and the organic and inorganic components of DDM are presented to emphasize the similarities with autogenous bone. Studies of DDM properties, such as osteoinductive and osteoconductive functions as well as efficacy and safety, which are mandatory for its use as a bone graft substitute, are also presented. The clinical applications of powder, block, and moldable DDM are discussed, along with future developments that can support growth factor and stem cell delivery.

Surface characterization and biological properties of regular dentin, demineralized dentin, and deproteinized dentin

Bone autografts are often used for reconstruction of bone defects; however, due to the limitations of autografts, researchers have been in search of bone substitutes. Dentin is of particular interest for this purpose due to high similarity to bone. This in vitro study sought to assess the surface characteristics and biological properties of dentin samples prepared with different treatments. This study was conducted on regular (RD), demineralized (DemD), and deproteinized (DepD) dentin samples. X-ray diffraction and Fourier transform infrared spectroscopy were used for surface characterization. Samples were immersed in simulated body fluid, and their bioactivity was evaluated under a scanning electron microscope. The methyl thiazol tetrazolium assay, scanning electron microscope analysis and quantitative real-time polymerase chain reaction were performed, respectively to assess viability/proliferation, adhesion/morphology and osteoblast differentiation of cultured human dental pulp stem cells on dentin powders. Of the three dentin samples, DepD showed the highest and RD showed the lowest rate of formation and deposition of hydroxyapatite crystals. Although, the difference in superficial apatite was not significant among samples, functional groups on the surface, however, were more distinct on DepD. At four weeks, hydroxyapatite deposits were noted as needle-shaped accumulations on DemD sample and numerous hexagonal HA deposit masses were seen, covering the surface of DepD. The methyl thiazol tetrazolium, scanning electron microscope, and quantitative real-time polymerase chain reaction analyses during the 10-day cell culture on dentin powders showed the highest cell adhesion and viability and rapid differentiation in DepD. Based on the parameters evaluated in this in vitro study, DepD showed high rate of formation/deposition of hydroxyapatite crystals and adhesion/viability/osteogenic differentiation of human dental pulp stem cells, which may support its osteoinductive/osteoconductive potential for bone regeneration.

Autogenous demineralized dentin matrix from extracted tooth for the augmentation of alveolar bone defect: a prospective randomized clinical trial in comparison with anorganic bovine bone

OBJECTIVES

The aim of this study was to prospectively evaluate the clinical efficacy and histological outcome of the autogenous tooth graft material (AutoBT) compared to that of anorganic bovine bone (Bio-Oss^® , Geistlich, Switzerland) in post-extraction alveolar bone augmentation.

PATIENTS AND METHODS

A total of 33 graft sites in 24 patients were included in this study. AutoBT was used in 21 sites of 15 patients and Bio-Oss^® was used in 12 sites of 9 patients for alveolar bone augmentation 2-4 weeks after dental extraction. Vertical dimension of grafted bone was measured both at the time of graft placement and at implant fixture placement after 6 months. Trephine cores were harvested for the histomorphometric evaluations during implant placement when feasible. The primary stability of implant fixture was also measured.

RESULTS

Infection of graft material or graft bed was not observed and graft sites healed without any notable complications in both groups. The vertical dimensions of alveolar bone increased by 5.38 ± 2.65 mm in AutoBT group and 6.56 ± 3.54 mm in Bio-Oss^® group at 6 months post-extraction. Histomorphometrically, new bone formation of AutoBT-grafted site was 31.24 ± 13.87% while that of Bio-Oss^® was 35.00 ± 19.33%. The implant stability quotient (ISQ) of implants placed in AutoBT-grafted sites measured 72.80 ± 10.81 while those placed in Bio-Oss^® -grafted sites measured 70.0 ± 12.86. There were no statistically significant differences between measurements of the two groups.

CONCLUSION

Autogenous demineralized dentin matrix from extracted tooth grafted to extraction sockets for the augmentation of vertical dimension was as effective as augmentation using anorganic bovine bone. Both groups showed favorable wound healing, similar amount of implant stability, and histologically confirmed new bone formation. Thus, the results of this study suggest that autogenous tooth graft material is a viable option for alveolar bone augmentation following dental extraction.

Different methods of dentin processing for application in bone tissue engineering: A systematic review

Dentin has become an interesting potential biomaterial for tissue engineering of oral hard tissues. It can be used as a scaffold or as a source of growth factors in bone tissue engineering. Different forms of dentin have been studied for their potential use as bone substitutes. Here, we systematically review different methods of dentin preparation and the efficacy of processed dentin in bone tissue engineering. An electronic search was carried out in PubMed and Scopus databases for articles published from 2000 to 2016. Studies on dentin preparation for application in bone tissue engineering were selected. The initial search yielded a total of 1045 articles, of which 37 were finally selected. Review of studies showed that demineralization was the most commonly used dentin preparation process for use in tissue engineering. Dentin extract, dentin particles (tooth ash), freeze-dried dentin, and denatured dentin are others method of dentin preparation. Based on our literature review, we can conclude that preparation procedure and the size and shape of dentin particles play an important role in its osteoinductive and osteoconductive properties. Standardization of these methods is important to draw a conclusion in this regard. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2616-2627, 2016.

Evaluation of osteoconductive and osteogenic potential of a dentin-based bone substitute using a calvarial defect model

The aim of this study was to assess the osteoconductive and osteogenic properties of processed bovine dentin using a robust rabbit calvarial defect model. In total, 16 New Zealand White rabbits were operated to create three circular defects in the calvaria. One defect was left unfilled, one filled with collected autogenous bone, and the third defect was filled with the dentin-based bone substitute. Following surgery and after a healing period of either 1 or 6 weeks, a CT scan was obtained. Following sacrificing, the tissues were processed for histological examination. The CT data showed the density in the area grafted with the dentin-based material was higher than the surrounding bone and the areas grafted with autologous bone after 1 week and 6 weeks of healing. The area left unfilled remained an empty defect after 1 week and 6 weeks. Histological examination of the defects filled with the dentin product after 6 weeks showed soft tissue encapsulation around the dentin particles. It can be concluded that the rabbit calvarial model used in this study is a robust model for the assessment of bone materials. Bovine dentin is a biostable material; however, it may not be suitable for repairing large 4-wall defects.

A New Natural Biomaterial: Sheep Dentine Derived Hydroxyapatite

Hydroxyapatite (HA) is a particularly attractive material for bone and tooth implants since it does not only closely resemble human tooth and bone mineral but it has also biologically proven to be compatible with these tissues. The applications of pure HA are restricted to non load bearing implants due to the poor mechanical properties of HA. Biomaterials of synthetic HA are highly reliable but the synthesis of HA is often complicate and expensive. Bioceramics of naturally derived biological apatites are more economic. Aim of the present work is to introduce sheep teeth dentine HA material as an alternative source of bioactive biomaterials for grafting purposes. The work was started with such a way that extracted sheep teeth were cleaned. The teeth were calcinated at 850°C in air. It was seen that enamel matter was easily separated from dentine after calcination. The collected dentine parts were crushed and ball milled. The powder was pressed between hardened steel dies to produce samples suitable for compression and microhardness tests. The obtained powder compacts were sintered at different temperatures, specifically 1000, 1100, 1200, and 1300°C in air. Results of microhardness and compression strength (along with the statistical analysis of these results) as well as those of SEM and XRD analyses are presented. In the literature, there is very little information about the mechanical properties of dentine and enamel matter derived from sheep, bovine and human. The highest compression strength value in the present study was measured around 146 MPa (from human dentine derived HA the highest value was almost 60 MPa after sintering at 1300°C). The best microhardness in the present study was found as nearly 125 HV. The results of this study showed that the HA material produced from sheep tooth dentine can be qualified as a promising source of HA needed to produce bioactive ceramics.

Biocompatibility of Resin-based Dental Materials

Oral and mucosal adverse reactions to resin-based dental materials have been reported. Numerous studies have examined the biocompatibility of restorative dental materials and their components, and a wide range of test systems for the evaluation of the biological effects of these materials have been developed. This article reviews the biological aspects of resin-based dental materials and discusses the conventional as well as the new techniques used for biocompatibility assessment of dental materials.