Comparative evaluation of ten different condylar base fracture osteosynthesis techniques

Optimal Plate Choice for High-Neck Mandibular Condyle Fracture: A Mechanistic Analysis of 16 Options

(1) Background: Mandibular fractures are common, with the condylar process being a frequent site of injury, accounting for 25-45% of cases. This research aims to assess the mechanical suitability of various plates for high-neck condyle fractures. (2) Methods: Polyurethane models mimicking high-neck condyle fractures were utilized in this study. Sixteen distinct plate designs, constructed from titanium sheets, were tested. The figures underwent force assessments on a durability testing apparatus, and the relationship between used force and fracture movement was documented. (3) Results: For high-neck breaking, the two straight plates emerged as the most effective, aligning with established osteosynthesis standards. The second-best plate exhibited nearly half the strength of the gold standard. (4) Conclusions: In response to the aim of this study, considering the mechanical aspects, the double plain plate stands out as the optimal choice for osteosynthesis in cases of high-neck fractures of the mandibular condylar process. In addition, the authors propose the Mechanical Excellence Factor (MEF) as a superior metric for appraising a plate's mechanical force, surpassing the conventional Plate Design Factor (PDF).

Which of the 37 Plates Is the Most Mechanically Appropriate for a Low-Neck Fracture of the Mandibular Condyle? A Strength Testing

(1) Background: The mandible is the most frequently injured component of the facial skeleton, with 25-45% of mandibular fractures involving the condylar process. This study aims to mechanically compare which plates are most suitable for use in low-neck fractures of the condyle. (2) Methods: Polyurethane mandibular models with simulated low-neck fractures were tested using 37 distinct plate designs. These plates were fabricated from 1 mm thick, grade 23 titanium sheets. The models were then subjected to force tests on a strength machine, and the correlation between applied force and fracture displacement was recorded. (3) Results: For low-neck fractures, XCP side-dedicated 3+5 and ACP-T plates demonstrated strength comparable to that of two straight plates, the current gold standard in osteosynthesis. (4) Conclusions: The Mechanical Excellence Factor (MEF) introduced by the authors provides a more accurate metric for theoretically predicting a plate's mechanical strength compared to the Plate Design Factor (PDF). Eight plate characteristics were utilized to calculate the MEF. Employing the MEF allows for rapid, preliminary validation before undertaking strength tests. Furthermore, the findings of this study can guide the selection of the most durable plate designs for subsequent fatigue testing.

Which of 51 Plate Designs Can Most Stably Fixate the Fragments in a Fracture of the Mandibular Condyle Base?

In the surgical treatment of the most common fracture of the mandible, which is a fracture of the condylar base, a great choice of different plate shapes is observed. The aim of this study was to determine which shape gives the greatest fixation stiffness. To ensure homogeneity in comparison, tests were performed on polyurethane models divided at the level of the condylar base fracture and each were fixed with 51 plates. The plates were cut from a 1 mm thick grade 23 titanium sheet. The models were then loaded and the force required for 1 mm of fracture displacement was recorded. It was noted that in addition to osteosynthesis from two simple plates, there were also two dedicated single plates with similar rigidity. Among the large number of described designs of plates, there is considerable variation in terms of the stability of the fixation performed with them. The proposed Mechanical Excellence Factor allows a pre-evaluation of the expected rigidity of fixation with a given plate shape without the need for a loading experiment. The authors expect this to be helpful for surgeons in the application of relevant plates, as well for inventors of new plates for the osteosynthesis of basal fractures in mandibular condyle.

Remodelling of mandibular condylar head after fixation of fractures with ultrasound activated resorbable pins: A retrospective case series

The aim of this study was to assess whether the resorption of poly-lactic acid pins, used for condylar head fracture fixation, adversely affect remodelling of the condylar head. A retrospective review of patients was performed that underwent ORIF of CHF with ultrasound activated resorbable poly-lactic acid pins and had CT/CBCT scans of the condyle at least 18 months after surgery, at which point the fixation material was expected to be resorbed. We reviewed the size, shape and position of the condylar head and compared this to the normal side and compared this to the results of conservative management and ORIF with titanium screws in the literature. Most patients had condylar heads normally positioned and shaped, with minimal bone changes. The position of the condyle in the fossa, its shape and bone changes compare favourably with previous studies on CHF managed conservatively or with titanium screw fixation. There was no radiographic evidence of the pins after 18 months. In conclusion, ultrasound activated resorbable pins can provide suitable fixation for ORIF of condylar head fractures, avoiding the need for screw removal, and there was no evidence that the resorption process adversely affected the remodelling of the condylar head.

In vivo biocompatibility evaluation of 3D-printed nickel-titanium fabricated by selective laser melting

Nickel-titanium (NiTi) belongs to the group of shape-memory alloys (SMAs), which are characterized by flexibility and reversible deformability. Advanced techniques in 3D printing by selective laser-melting (SLM) process allow the manufacturing of complex patient-specific implants from SMAs. Osteosynthesis materials made of NiTi could be used for minimally invasive surgical approaches in oral- and maxillofacial surgery. However, the in vivo biocompatibility has not yet been fully investigated, especially in load-sharing and load-bearing implants. The aim of this study was to evaluate the in vivo biocompatibility of SLM-produced NiTi for intraosseous and subperiosteal applications. Test specimens were implanted into the frontonasal bone of ten miniature pigs. To assess peri-implant bone metabolism, fluorescent dye was administered after 2, 4, 6, 10, 12, and 14 weeks intraperitoneally. Specimens and the surrounding tissues were harvested after 8 and 16 weeks for histological analysis. While the NiTi implants presented a higher bone-to-implant contact ratio (BIC) after 8 than after 16 weeks (43.3 vs. 40.3%), the titanium implants had a significantly higher BIC after 16 weeks (33.6 vs. 67.7%). Histologically, no signs of peri-implant inflammation or foreign-body reaction were detectable. With respect to this preliminary study design, 3D-printed NiTi shows sufficient biocompatibility for intraosseous and subperiosteal implant placement.

Towards a consensus for classification of mandibular condyle fractures

The merits of surgical treatment of fractures of the mandibular condyle versus non-surgical management remains highly controversial, despite a large volume of literature dedicated to this topic. One reason the controversy remains, is because most of the outcomes in the literature are not directly comparable. The disparate range of condylar fracture classifications used is one of the reasons that studies are not comparable. We sought to review classification systems for condylar fractures used in the recent scientific literature. Review of the literature from 2016 to 2019, looking for papers relating to fractures of the mandibular condyle. Papers identified were assessed for type of study, focus of study, classification system used. 88 studies were identified, including prospective and retrospective cohort studies, randomised and non-randomised prospective studies, randomised controlled trials and case series. More studies focussed on epidemiological factors than surgical access, fixation or outcomes. 31 used no classification system, whilst 17 used unique classification systems and 40 used previously referenced classification systems. Classification systems are used to help separate clinical problems into distinguishable groups, where there is a difference in management or outcome depending on the distinguishing features. There is currently a wide diversity of classification systems used for condyle fractures, and as a result, comparisons of surgical access, fixation and outcomes are difficult to make. Having a single classification system across the published literature would allow easier comparison and the classification proposed by the AO group is recommended for future use.

Assessment of biomechanical properties of specially-designed miniplate patterns in a mandibular subcondylar fracture model with finite element analysis and a servohydraulic testing unit

The aim of our study was to compare the biomechanical stability of three different systems used to fix mandibular condylar fractures on synthetic polyurethane mandibles using a servohydraulic testing unit and finite element analysis (FEA). We measured the resistance to displacement loads causing 1.75 and 3.5mm displacements of the fragments, and the maximum resistance values before failure of the fixation system in 30 condylar necks of 15 polyurethane mandible models. The three subgroups investigated were arranged as a triangular plate (n=10), a quadrangular plate (n=10), and a straight miniplate (n=10). The most successful fixation pattern was achieved with two straight four-hole miniplates. However, the triangular plate can easily be applied as a second option by an endoscopic approach. The rectangular plates showed no success in mandibular condylar fractures.

Evaluation of Stress Distribution of Four Different Fixation Systems at High- and Low-Level Subcondylar Fractures on a Nonhomogenous Finite Element Model

PURPOSE

The aim of the present study was to provide insight into a suitable fixation system for subcondylar fractures located at different levels.

MATERIALS AND METHODS

High and low subcondylar fractures were simulated on a nonhomogenous mandibular model, and rhombic, trapezoid, and lambda plates and 2 miniplates were used for fixation. The stress in the bone and displacement of the fracture site were measured using finite element analysis.

RESULTS

For both high and low subcondylar fractures, the lowest von Mises stress was measured in the rhombic plate system. For high subcondylar fractures, the highest tension in the cortical bone was measured in the trapezoid plate system, and the highest compression was measured in the rhombic plate system. For low subcondylar fractures, the highest tension in the bone was measured in the rhombic system and the highest compression was measured in the trapezoid system. In both high and low subcondylar fracture models, the least displacement amount was measured in the 2-plate system.

CONCLUSIONS

The results of the present study have shown that the rhombic plate system might be the proper choice for high subcondylar fractures and the 2-plate system might provide better results for low subcondylar fractures.

Open Rigid Internal Fixation of Low-Neck Condylar Fractures of the Mandible: Mechanical Comparison of 16 Plate Designs

BACKGROUND

In the literature, no information on plates for low-neck mandibular condylar osteosynthesis can be found, despite the fact that 30 plate designs have already been published. The aim of this study was to compare any dedicated plates for possible use in low-neck condylar fracture osteosynthesis.

METHODS

The force required for 1-mm displacement of the fixed fracture fragments and incidents of screw loosening were recorded on polyurethane mandibles among 16 designs of titanium plates fixed by 6-mm screws in a 2.0 system.

RESULTS

Double-straight plate fixation was the mechanical gold standard (15.2 ± 3.5 N), followed by A-shape Condylar Plates (14.9 ± 2.1 N), X-shape Condylar Plates (14.2 ± 1.3 N) and Auto Repositioning Plates (11.8 ± 2.4 N). Screw loosening was uncommon, as a minimum of three screws were placed into the condylar part. Fewer screws were lost from the ramus part of the fixation if the plate was attached to the condylar part by three screws. Often, the stability of the ramus screws was lost when there were only two fixing screws in the condyle (p < 0.001).

CONCLUSIONS

It is advisable to consider the mechanical advantages as one decides which plate to choose for open rigid internal fixation in low-neck condylar fractures, or to only be aware of the significant differences in mobility within the fracture line after fixation with different dedicated plates.

Forces Causing One-Millimeter Displacement of Bone Fragments of Condylar Base Fractures of the Mandible after Fixation by All Available Plate Designs

Background: There has been no direct comparison of all existing plates dedicated for fracture osteosynthesis of mandibular condyle base until now. The aim of the study was to test mechanically all available designs of titanium plates on the market on polyurethane mandibles using an individually designed clamping system. Methods: Forces required for a 1 mm displacement of fixed fracture and incidents of screw loosening were recorded. Results indicated the best mechanical plates among all existing designs available. Results: It has occured that some of osseofixation plates should not be used any more, whereas some shape of the single plates are similar shape to two single plates shape are regarded as the best osseofixation method for condyle base fracture. Conclusion: General observation is the bigger plate and more screws, the better rigid stable osteosynthesis of mandibular condyle base. 4 plates of current designs of total 30 tested series can be recommended for open rigid internal fixation of fractures of the base of the mandibular condyle. The rest of 26 existing plates should not be used in condylar base fractures.

Biomechanical Evaluation of Mandibular Condyle Fracture Osteosynthesis Using the Rhombic Three-Dimensional Condylar Fracture Plate

PURPOSE

The aim of the present study was to evaluate the biomechanical stability of osteosynthesis in mandibular condyle fractures using a newly designed rhombic 3-dimensional (3D) condylar fracture plate and compare it with that using standard two 4-hole miniplates and with that in nonfractured condyles.

MATERIALS AND METHODS

Using 200 porcine mandibles, 3 different monocortical plating techniques were evaluated. The condyles were fractured along a defined line tangentially through the sigmoid notch and perpendicular to the posterior border. After anatomic reduction, osteosynthesis was performed using either standard rhombic 3D condylar fracture plates and standard screws (group A) or locking rhombic 3D condylar fracture plates, which were fixed either with standard screws (group B) or locking screws (group C). For comparison, nonfractured condyles (group D) and condyles fixed with standard two 4-hole miniplates and 8 screws (group E) were included. Using a universal mechanical testing machine (TIRA Test 2720; TIRA GmbH Schalkau, Germany), each group was subjected to linear loading from laterally to medially, medially to laterally, anteriorly to posteriorly, and posteriorly to anteriorly. The maximum axial force and displacement at the maximum force were measured. The mean values were compared for statistical significance using analysis of variance with Bonferroni's correction (statistical significance set at P < .05).

RESULTS

The main mode of failure in the plating techniques investigated was the pull out of screws from the proximal fragment. We found no statistically significant differences in the stability of osteosynthesis between the two 4-hole miniplates and the rhombic 3D condylar fracture plate when loading from posteriorly to anteriorly, laterally to medially, and medially to laterally. However, when loading from anteriorly to posteriorly, a statistically significant difference between the standard and locking system and the two 4-hole miniplate system was observed, with the latter proving more stable.

CONCLUSIONS

The results of the present biomechanical study suggest that the rhombic 3D condylar fracture plates are suitable for the treatment of condylar neck fractures. Both types of the plate are able to resist physiologic strains comparable to the two 4-hole miniplates.

Condylar Fractures: Review of 40 Cases

Purpose:

To put an algorithmic approach for the treatment of condylar fractures according to the condition of occlusion.

Patients and Methods:

This study had been carried out between May 2016 and April 2017. Forty patients were included (6 females and 34 males) with their ages ranged between 3 and 60 years. Patients were managed through two approaches as follows: maxillomandibular fixation (MMF) only regimen and MMF with open reduction and internal fixation regimen. The operated cases were 12 with bilateral condylar/subcondylar fractures, and the rest were unilateral 28 cases.

Results:

Data were assessed demographically, time lapse before the intervention, surgically, functionally, and radiologically. In general, there were no significant differences between closed and open methods.

Conclusion:

Retromandibular approach was convenient for internal fixation of condylar fracture with a good outcome. In our work, there were no significant differences between closed and open methods in the treatment of condylar fractures.

Evaluation of an experimental oblique plate for osteosynthesis of mandibular condyle fractures

OBJECTIVE

The aim of this study was to test the bone thickness and potential screw length for osteosynthesis of condylar base fractures (according to the Loukota classification) with an experimental titanium plate, placed in an ideal position against 2 types of conventional plates.

STUDY DESIGN

After exclusion of completely edentulous mandibles, 28 dentate macerated mandibles available at the time of the study were included. Linear regression models 1 and 2 compared the sums of the 2 cranial bone thicknesses and the 3 caudal thicknesses among the 3 different plate designs, and linear models 3 and 4 tested the bone thickness in the 2 most cranial screw axes.

RESULTS

Linear models 1 and 2 revealed significantly higher potential screw lengths for the experimental oblique plate. Equally, linear models 3 and 4 indicated significantly higher bone thickness for the novel oblique plate.

CONCLUSION

The novel proposed oblique plate allows for favorable plate positioning in a biomechanically ideal location with sufficient amounts of local bone for stable plate fixation. When plates with 15-degree angulated screw holes are used, stable bicortical plate fixation can be achieved.

Finite Element Evaluation of Stable Fixation in Combined Mandibular Fractures

PURPOSE

The fixation of combined mandibular fractures, especially symphyseal-condylar fractures, although occurring commonly and having a higher complication rate in the clinic, is rarely investigated regarding predictable therapeutic approaches. Thus this study's aim was to assess different forms of condylar fixation when combined with symphyseal fracture fixation.

MATERIALS AND METHODS

Using finite element models, we analyzed the stress distribution that occurs when a condylar fracture is fixed with 1 miniplate, 2 miniplates, or a trapezoidal condylar miniplate and when a symphyseal fracture is fixed with 2 parallel plates, 2 perpendicular plates, or 2 lag screws. The null hypothesis was that there would be no differences among the different fixation techniques.

RESULTS

The results showed a stress concentration in the anterior region of the condyle, close to the sigmoid notch. Moreover, adequate fixation in the symphysis could result in less tension at the condylar region. Therefore, when the symphysis was fixed with a lag-screw technique, condylar fixation was less required, showing a more adequate stress distribution when the condyle was fixed with 1 or 2 plates. Conversely, when the symphyseal fixation was less effective, by use of perpendicular plates, there was a change in the stress distribution at the condylar region, altering fixation behavior and resulting in more tension and displacement in the condyle, especially when a trapezoidal plate was used.

CONCLUSIONS

A lag screw and parallel double plates appear to be suitable for symphyseal fixation, whereas 2 straightly positioned plates and a trapezoidal plate are suitable for condylar fixation. However, the combination of perpendicular plates in symphyseal fixation and a trapezoidal plate in condylar fixation showed an altered stress distribution.

A New Method of Fixation With the Yang's Keyhole Plate System for the Treatment of Mandible Fractures

PURPOSE

This study was designed to assess the clinical outcomes and surgical convenience of a newly designed Yang's Keyhole plate (YK plate) system for treatment of subcondyle and angle fractures of the mandible. To evaluate the system's clinical outcomes and surgical convenience, chart review and surgical simulation using a mandible replica model were performed.

METHODS

The YK plate system, which is a slightly modified sliding plate, has 0.8-mm thick titanium and a widened hole in the anterior region to permit a screw head to be inserted. The clinical results and clinical convenience of the newly developed YK plate system and the existing 4-hole miniplate fixation technique were compared using a surgical simulation. Moreover, the clinical results of the patients who underwent mandibular surgery were compared during the follow-up examination periods (ie, weeks 1, 2, 4, 8, and 16).

RESULTS

No critical complications in any of the 22 patients were reported during the 4-month follow-up period. The results of the assessment of clinical convenience using the surgical simulation showed that using the YK plate system was more convenient and saved time compared to using the 4-hole miniplate.

CONCLUSION

The newly developed YK plate system can be applied to subcondyle and angle fractures of the mandible and can provide reliable and convenient application and use.

Treatment of fractures of the mandibular condylar head with ultrasound-activated resorbable pins: early clinical experience

Controversy continues about the benefits and disadvantages of open reduction and internal fixation of fractures of the condylar head. Once a decision to treat surgically has been made, an appropriate method of fixation must be chosen. Standard titanium fixation has a number of complications, including the risk of protrusion of the screw beyond the condylar head and the possible need for removal later. Resorbable fixation is an alternative, and ultrasound-activated resorbable pins are a new innovation. We have treated a series of 15 patients with 17 fractures of the condylar head, in which the use of ultrasound-activated resorbable fixation has provided adequate strength and stability during early healing. Complications included technical difficulties in achieving complete anatomical reduction as a result of fragmentation of the condylar head, and three facial nerve palsies, two of which recovered within three months. No pins failed, and there was no sign of instability during healing.

Comparison of Different Fixation Types Used in Unilateral Mandibular Condylar Fractures: An In Vivo Study With New Biomechanical Model

INTRODUCTION

The aim of this in vivo study is to compare the single-titanium, double-titanium mini plate, and single resorbable plate systems used in internal rigid fixation of the unilateral mandibular condylar fractures on new design biomechanical model.

METHODS

Thirty synthetic polyurethane models were used for biomechanical testing. Fracture lines were created for each model. Fragments were fixed with single-titanium plates in Group A (n = 10), double-titanium plates in Group B (n = 10), and single biodegradable plate (PPLA) in Group C (n = 10). Masticatory forces were applied to the models and the biomechanical properties of the titanium plate and screws, resorbable plate, and screws were evaluated.

RESULTS

The average failure force for Group A, Group B, and Group C is 199, 324, 177N and the average bone displacement for Group A, Group B, Group C is 1.9, 0.3, 2.1 mm, respectively.

DISCUSSION

Double titanium plates showed the most acceptable results in the fixation of unilateral subcondylar fractures where the single titanium and biodegradable plate systems failed to provide enough stability in unilateral subcondylar fracture fixation. Biodegradable plate systems are still not an alternative in fixation of unilateral condylar fractures.

Simultaneous surgery for subcondylar fracture and prominent angle of the mandible

We experienced a patient of subcondylar fracture who had a squared contour of the lower face with prominent angle of the mandible and masseter hypertrophy. Our patient was increasingly seeking esthetic improvement of the lower third of the face. But she did not want multi-stage operations. Thus, we decided and performed a one-stage mandibular angle ostectomy with fracture management. We have a stable and esthetic result simultaneously despite fractures of the fixation plates during follow-up period, so report a case.

COMPARATIVE EVALUATION OF THE MECHANICAL PROPERTIES OF RESORBABLE AND TITANIUM MINIPLATES USED FOR FIXATION OF MANDIBULAR CONDYLE FRACTURES

In this paper, comparative evaluation of the mechanical properties of resorbable and titanium miniplates, which are used for the fixation of the mandibular condyle fractures, was carried out using finite element analysis (FEA). To do so, first two-dimensional (2D) computed tomography (CT) images of mandibles recorded from 10 adult patients were converted into three-dimensional (3D) solid body models. Then these models were transferred to the finite element software. In the finite element stage of the study, a condyle fracture was created onto the mandible and double-titanium and double-resorbable miniplates were separately fixed to the mandible surface such that the fractured sites to be firmly attached. Stress distribution over the plates and interfragmentary displacements between adjacent surfaces, which stem from the clenching force applying to the mandible, were calculated using FEA. It was observed from the results that maximum tensile stresses occurred in the titanium miniplates were significantly higher than those obtained from resorbable miniplates (p < 0.01). Higher maximum displacements between fractured surfaces were observed in the case of resorbable plate systems (p < 0.01). Maximum stress and displacement values obtained from both titanium and resorbable plate systems were under clinically acceptable limits. According to results, resorbable plates showed a similar reliability with titanium miniplates in terms of withstanding various stress and strain deformations.

Finite element analysis of patient-specific condyle fracture plates: a preliminary study

Various patterns of internal fixation of mandibular condyle fractures have been proposed in the literature. This study investigates the stability of two patient-specific implants (PSIs) for the open reduction and internal fixation of a subcondylar fracture of the mandible. A subcondylar fracture of a mandible was simulated by a series of finite element models. These models contained approximately 1.2 million elements, were heterogeneous in bone material properties, and also modeled the muscles of mastication. Models were run assuming linear elasticity and isotropic material properties for bone. The stability and von Mises stresses of the simulated condylar fracture reduced with each of the PSIs were compared. The most stable of the plate configurations examined was PSI 1, which had comparable mechanical performance to a single 2.0 mm straight four-hole plate.

Comparative evaluation of various miniplate systems for the repair of mandibular corpus fractures

Miniplates have been used during the last decade to facilitate stability between bony fragments in the maxillofacial region and are currently the preferred surgical method for the fixation of fractures and osteotomies. The aim of this study was to evaluate and compare the biomechanical behaviors of six different types of miniplates used to reconstruct mandibular body fractures: Group 1 (straight, 2 holes, 12.0 mm spacing), Group 2 (straight, 4 holes, 9.0 spacing), Group 3 (straight, 6 holes, 9.0 mm spacing), Group 4 (L-shaped, 4 holes, 9.0 mm spacing, right hand plate), Group 5 (Y-shaped, 5 holes, 12.0 mm spacing), and Group 6 (double Y-shaped, 6 holes, 9.0 mm spacing). Thirty bovine hemimandibles and a custom-made 3-point biomechanical test frame mounted on a Shimadzu universal test machine were used to evaluate the six different miniplate systems. Results revealed that Group 1 (straight, 2 holes, 12.0 mm spacing) and Group 4 (9.0 mm spacing, right hand plate) had the lowest biomechanical stability, whereas Group 6 (6 holes, 9.0 mm spacing) had the highest biomechanical stability. Group 6 also provided statistically greater resistance to displacement than Group 1 and Group 4.

A Biomechanical Comparison of Three 1.5-mm Plate and Screw Configurations and a Single 2.0-mm Plate for Internal Fixation of a Mandibular Condylar Fracture

The most stable pattern of internal fixation for mandibular condyle fractures is an area of ongoing discussion. This study investigates the stability of three patterns of plate fixation using readily available, commercially pure titanium implants. Finite element models of a simulated mandibular condyle fracture were constructed. The completed models were heterogeneous in bone material properties, contained approximately 1.2 million elements and incorporated simulated jaw adducting musculature. Models were run assuming linear elasticity and isotropic material properties for bone. No human subjects were involved in this investigation. The stability of the simulated condylar fracture reduced with the different implant configurations, and the von Mises stresses of a 1.5-mm X-shaped plate, a 1.5-mm rectangular plate, and a 1.5-mm square plate (all Synthes (Synthes GmbH, Zuchwil, Switzerland) were compared. The 1.5-mm X plate was the most stable of the three 1.5-mm profile plate configurations examined and had comparable mechanical performance to a single 2.0-mm straight four-hole plate. This study does not support the use of rectangular or square plate patterns in the open reduction and internal fixation of mandibular condyle fractures. It does provide some support for the use of a 1.5-mm X plate to reduce condylar fractures in selected clinical cases.

Evaluation of clinical use of indigenously developed delta plate in management of subcondylar fracture

Condylar fractures account for 25-35% of mandibular fractures and deserve a special consideration apart from rest of the mandible due to their anatomical differences and healing potential. Previous clinical and biomechanical studies have recommended using two miniplates for fixation of condyle fractures. Two miniplates require a certain size of the proximal condyle fragment and thus are applicable mainly in cases involving low fractures. The present study evaluates the clinical use of indigenously developed titanium delta-shaped miniplate in open reduction and internal fixation of subcondylar fracture.

Endoscopic treatment of mandibular condylar fractures in live minipigs: benefits of the operative learning curve

Endoscopic treatment of mandibular condyle fractures is a minimally invasive technique that avoids the complications of open reduction and internal fixation. We have used live minipigs as an animal model for learning and training the technique. Fourteen condylar fractures were created, reduced, and internally plated in 7 minipigs using an endoscopic approach by a surgeon with no previous experience of the technique. The mandibles were reduced and fixed successfully in each animal. Operating time was reduced as the surgeon became more familiar with the technique. Minipigs are useful as a model for the endoscopic approach to the treatment of mandibular condylar fractures. Surgeons have the opportunity to train and gain surgical endoscopic experience before treating patients.

A review of trauma and trauma-related papers published in the British Journal of Oral and Maxillofacial Surgery in 2010-2011

This review summarises all trauma and related papers published in the British Journal of Oral and Maxillofacial Surgery (BJOMS) from January 2010 to December 2011. In total 45 articles were published, of which 42% (19) were full-length articles. These articles primarily focused on the management of mandibular condyle and orbital fractures, with several papers discussing maxillofacial surgery by the British military. There were no articles discussing midfacial fractures or massive facial trauma. The remaining papers included short communications, technical notes, and letters; and provided discussion of interesting cases, new surgical techniques and fracture classifications. The number of trauma papers published in BJOMS appears to be less than other sub-specialties such as head and neck oncology. The number of prospective and randomised studies remains low, highlighting a need to foster further research within maxillofacial trauma.

Full length articles published in BJOMS during 2010-11--an analysis by sub-specialty and study type

Full length articles such as prospective and retrospective studies, case series, laboratory-based research and reviews form the majority of papers published in the British Journal of Oral and Maxillofacial Surgery (BJOMS). We were interested to evaluate the breakdown of these types of articles both by sub-specialty and the type of study as well as the proportion that are written by UK colleagues compared to overseas authors over a 2 year period (2010-11). A total of 191 full length articles across all sub-specialties of our discipline were published, with 107 papers (56%) coming from UK authors. There were proportionately more oncology papers arising from the UK than overseas (60 and 30% of total respectively) while the opposite was found for cleft/deformity studies (10% and 22%). There was only one laboratory-based study published from the UK compared with 27 papers from overseas. The number of quality papers being submitted to the Journal continues to increase, and the type of article being published between UK and overseas probably reflects different practices and case-loads amongst colleagues. The relatively few UK laboratory based studies published in BJOMS compared to overseas authors are most likely due to authors seeking the most prestigious journals possible for their work.

Comparison of single vs double noncompression miniplates in the management of subcondylar fracture of the mandible

PURPOSE

The purpose of this study was to compare the functions of the condyle and complications after fixation of a subcondylar fracture of the mandible with two noncompression miniplates and a single non-compression miniplate.

MATERIALS AND METHODS

A total of 30 patients who required open reduction of a subcondylar fracture of mandible were selected for the study. The patients were randomly divided into two groups of 15 each. Group I comprised of patients treated with a single miniplate and Group II were treated with two noncompression miniplates. The patients were assessed for malocclusion, lateral deviation on opening, infection, plate removal, facial nerve function, the time taken in the surgery, and cost of implants used, in both the groups. All the parameters were compared statistically using the chi square test.

RESULTS

Out of 30 patients, inadequate reduction was noticed in one patient in Group I. Screw loosening occurred in two cases; both the cases were stabilized with a single miniplate. Screw loosening was always associated with chronic infection. In these cases, hardware removal was performed. Plate bending was observed in one case that was stabilized with a single miniplate. Malocclusion and lateral deviation occurred in this case. When two miniplate were used, no plate bending or screw loosening was observed. Malocclusion was observed in Group II.

CONCLUSION

Two plates for subcondylar fractures represent the best solution to obtain stable osteosynthesis in comparison to a single miniplate.

Biomechanical analysis of titanium plate systems in mandibular condyle fractures: a systematized literature review

PURPOSE: To conduct a systematized review of the literature about the main methodologies used to evaluate the biomechanical fixation systems with titanium plates in fractures of the mandibular condyle. METHODS: A systematized review of literature was performed in the electronic databases PubMed, EMBASE, LILACS and MEDLINE without restriction of the publication date. The eligibility criteria were laboratory studies involving mandibular condyle fractures, studies using titanium plates, biomechanical studies, in vitro and computational studies involving the finite element method (FEM). RESULTS: Eleven articles that met the eligibility criteria were selected, including seven articles involving in vitro studies and four studies with biomechanical analysis by using FEM. CONCLUSION: Although few articles have used the finite element method, the results of in vitro studies were similar to those found in computational studies, regarding to the stable use of two titanium miniplates.

Computer-assisted virtual technology in intracapsular condylar fracture with two resorbable long-screws

Our aim was to fix intracapsular condylar fractures (ICF) with two resorbable long screws using preoperative computer-assisted virtual technology. From February 2008 to July 2011, 19 patients with ICF were treated with two resorbable long screws. Preoperatively we took panoramic radiographs and spiral computed tomography (CT). Depending on their digital imaging and communications in medicine (DICOM) data, the dislocated condylar segments were restored using the SimPlant Pro™ software, version 11.04. The mean (SD) widths of the condylar head and neck from lateral to medial were 19.01 (1.28)mm and 13.84 (1.13)mm, respectively. In all patients, the mandibles and the ICF seen intraoperatively corresponded with the preoperative three-dimensional and virtual reposition. All patients were followed up for 6-46 months (mean 21). Occlusion and mouth opening had been restored completely in all but one patient, and absolute anatomical reduction was also achieved in most cases. Computer-assisted virtual technology plays an important part in the diagnosis of ICF, as well as in its preoperative design. Fixation with only two resorbable long screws is an effective and reliable method for fixing ICF.

What are we reading? A study of downloaded and cited articles from the British Journal of Oral and Maxillofacial Surgery in 2010

A large number of papers related to oral and maxillofacial surgery are published in many specialist journals. With the ever-increasing use of the internet it is easy to download them as part of a journal subscription on a fee per paper basis, or in some cases for free. Online access to the British Journal of Oral and Maxillofacial Surgery (BJOMS) is free to British Association (BAOMS) members with a $30 fee per paper download for non-members. Many colleagues use the online version of the journal, and this provides valuable information about downloading trends. Other data on articles that have been cited in subsequent publications are also readily available, and they form the basis for the calculation of a journal's impact factor. We evaluated the top 50 downloaded papers from the BJOMS website in 2010 to ascertain which articles were being read online. We also obtained data on the number of citations for papers published in 2009-2010 to see whether these papers were similar to the articles being downloaded. In 2010 there were over 360000 downloaded articles. The most popular papers were leading articles, reviews, and full length articles; only one short communication featured in the top 50 downloads. The papers most cited in subsequent publications were full length articles and leading articles or reviews, which represent 80% of the total citations of the 50 papers. Ten papers were in both the top 50 downloaded and most cited lists. We discuss the implications of this study for the journal and our readers.

Three-dimensional fixation of fractures of the mandibular condyle with a resorbable three-dimensional osteosynthesis mesh

We describe the use of a resorbable mesh fixed by ultrasound-activated pins, and report the satisfactory outcome in the first 5 patients treated.

Ultrasound-aided resorbable osteosynthesis of fractures of the mandibular condylar base: an experimental study in sheep

We evaluated the osteosynthesis of condylar fractures using resorbable mini plates and ultrasound-aided insertion of pins clinically and histologically. Stability was greater than that with resorbable screws because of the fusion of pin and plate. Long term evaluation showed complete resorption of the polymeric osteosynthesis material.

Review of biomechanical experimental studies on different plating techniques of mandibular condyle fractures

Mandibular condyle fractures are one of the most frequent injuries of the facial skeleton. The option for open treatment of mandibular condyle fractures has become more favorable since osteosynthesis materials were developed in the past few decades. However, the rigid fixation techniques of treating condyle fractures remain one of the controversial issues in maxillofacial trauma. These injuries are currently treated by plate-screw osteosynthesis and, depending on the case, the bone segments are fixed by one or two miniplates. Several techniques and plate types like adaption miniplates, minidynamic compression plates, resorbable plates and double plates have been evaluated biomechanically in various experimental and clinical studies. The biomechanical and physical behavior of mandibles have been investigated by different approaches. It can be divided into computer biomodels (e.g., finite element analysis) and physical models. Physical models allow testing on a gross level to give fatigue performance and fracture strength. The aim of this article is to carry out a review of the literature which deals with biomechanical evaluation made with physical models of plating techniques of mandibular condyle fracture. Based on the results of these studies, osteosynthesis with two miniplates seems to be the most stable way of treating mandible subcondylar fractures, and PLLA plates were not strong enough compared with metal plates.