Computed tomographic analysis of the position of the mandibular canal in unilateral temporomandibular joint ankylosis patients

Variations in the Position of Mandibular Foramen in Temporomandibular Ankylosis Patients

Aim

To evaluate the variation in the position of the mandibular foramen and mandibular canal in patients with and without temporomandibular joint ankylosis.

Materials and Methods

100 temporomandibular joints were evaluated of which 50 joints were ankylosed joints (Group A) and the rest 50 were normal joints (Group B) without ankylosis. These groups were further divided into those with growing potential (less than 18 years) and those without growing potential (above 18 years). The position of the mandibular foramen was measured from its center to the glenoid fossa, sigmoid notch, coronoid notch, gonion and posterior border on CBCT scans. The position of the mandibular canal was measured from the outer aspect of the canal to the lower border of the mandible, buccal and lingual cortical plates and the alveolus in the region of the 1st, 2nd and 3rd molars.

Results

The mean distance of the foramen from the base of the skull in Group A was 19.01 mm while the same for Group B was 31.26 mm. The mandibular foramen was found to be closer to the occlusal plane (5.43 mm) in Group A as compared to the mean distance of 6.21 mm reported in Group B. There was no significant difference in the position of the foramen from the posterior border, gonion and sigmoid notch between the groups. The mental foramen was seen more commonly posterior to the 2nd premolar and closer to the first molar region in Group A while in Group B it was seen anterior or near the 2nd premolar. In Group A, the mean distance of the canal to the buccal cortical plate in the 1st and 2nd molar regions was 3.65 mm and 5.76 mm, respectively, while in Group B it was 6.09 mm and 6.59 mm. The canal was further away from the lower border in ankylosis cases (8.79 mm) than the control group (7.41 mm). On comparing the unaffected side in unilateral cases with the normal mandible, the canal and the foramen location were similar to that of a normal mandible with the values in the lower range that is usually seen in normal mandibles.

Conclusion

Ankylosis of the mandible is a debilitating condition especially when it develops in an individual prior completion of growth as it can affect the mandibular anatomy. Understanding the variations that accompany a deranged mandible can assist the surgeon in planning of surgical procedures in a manner that limits the possible complications resulting from surgery.

Computed Tomographic Analysis of Position of Mandibular Canal and Mandibular Foramen in Patients with Mandibular Asymmetry

Introduction

Mandibular osteotomies in facial asymmetry are complicated by the abnormal position and course of inferior alveolar nerve. This manuscript aims to evaluate the possible variations in the preoperative positions of mandibular canal and mandibular foramen in patients with mandibular asymmetry due to condylar hyperplasia or condylar hypoplasia.

Materials & Methods

This study included 15 patients with mandibular asymmetry due to condylar hyperplasia or condylar hypoplasia for which bilateral sagittal split osteotomy (BSSO) was performed as a corrective procedure. The presence/absence and extent of postoperative neurosensory deficiency was recorded subjectively and objectively. The measurements were done using multiplanar reconstruction (MPR) of three-dimensional radiographic imaging and were compared to normal subjects.

Discussion

The results revealed that the mandibular canal was closer to the buccal cortex on the affected side and the inferior border on both sides in the region of second molar in condylar hyperplasia. In condylar hypoplasia, the canal was nearer to the inferior border and the alveolar crest in relation to second and third molars respectively on the affected and contralateral sides.The mandibular foramen was also more superior to the occlusal plane on both sides in both condylar hyperplasia and hypoplasia.

Conclusion

Based on the study outcomes, the authors propose that assessment of the positions of mandibular canal and mandibular foramen is crucial to avoid postoperative neurosensory deficiencies.

Morphometric Analysis of Cleft Lip Palate and Prognathic Mandibles in Relation to Mandibular Canal Course

INTRODUCTION

This study aimed to evaluate the mandibular canal course in individuals with cleft lip palate (CLP) and mandibular prognathism in terms of the sagittal split-ramus osteotomy using cone-beam computed tomography.

MATERIALS AND METHODS

Individuals with CLP older than 16 years of age and planned to undergo Le fort I + SSR osteotomies and those with class III occlusion planned to undergo Le fort I + SSR osteotomies were included. The measurements on the cleft side of CLP patients were compared with both their noncleft sides and those with class III occlusion. The course of the inferior alveolar nerve and its position in the mandible were evaluated starting from the mandibular foramen, the first entrance to the mandible, to the mental foramen, the exit from the mandible.

RESULTS

The distance between the mandibular canal and the buccal surface of the mandible (B3) on the plane tangent to the distal of the mandibular first molar and perpendicular to the occlusal plane was found to be greater in individuals with CLP (P = 0.011). Buccal cortex thickness (C4) at the level of the mandibular canal on the plane tangent to the distal of the mandibular second molar and perpendicular to the occlusal plane was found to be lower in individuals with CLP (P = 0.021).

CONCLUSIONS

The buccal cortex thickness of the mandible corpus and the distance of the mandibular canal to the buccal surface is different in patients with CLP compared to class III individuals' posterior to the mandible. Surgeons should take these differences into consideration during mandibular osteotomy.

Postoperative Positional and Dimensional Changes of Mandibular Canal after Bilateral Sagittal Split Set-Back Osteotomy

Objective

This preliminary study was planned to provide information about preoperative mandibular canal (MC) position and the postoperative positional changes of MC and length in three dimensions, with the purpose of providing some assistance in reducing inferior alveolar neurosensory disturbance (IAND).

Methods

MC was examined on CBCT data using SimPlant Pro Standalone 13.0. MC locations were measured in all dimensions, with respect to mandibular bony borders.

Results

The results showed that MC is frequently located in the midthird of the ramus anteroposteriorly and superoinferiorly and in the midthird of the corpus superoinferiorly. Postoperatively, ramus width was increased, ramus length was decreased significantly, and MC was repositioned laterally and inferiorly. MC length was decreased on both sides, non-correlated with the set-back amounts.

Conclusion

Preoperative results may be beneficial for the prediction of MC position for surgeons, and postoperative results will be used for the following studies to correlate postoperative positional changes with IAND.

Morphologic Analysis of the Temporomandibular Joint Between Patients With Facial Asymmetry and Asymptomatic Subjects by 2D and 3D Evaluation: A Preliminary Study

Signs and symptoms of temporomandibular joint (TMJ) dysfunction are commonly found in patients with facial asymmetry. Previous studies on the TMJ position have been limited to 2-dimensional (2D) radiographs, computed tomography (CT), or cone-beam computed tomography (CBCT). The purpose of this study was to compare the differences of TMJ position by using 2D CBCT and 3D model measurement methods. In addition, the differences of TMJ positions between patients with facial asymmetry and asymptomatic subjects were investigated. We prospectively recruited 5 patients (cases, mean age, 24.8 ± 2.9 years) diagnosed with facial asymmetry and 5 asymptomatic subjects (controls, mean age, 26 ± 1.2 years). The TMJ spaces, condylar and ramus angles were assessed by using 2D and 3D methods. The 3D models of mandible, maxilla, and teeth were reconstructed with the 3D image software. The variables in each group were assessed by t-test and the level of significance was 0.05. There was a significant difference in the horizontal condylar angle (HCA), coronal condylar angle (CCA), sagittal ramus angle (SRA), medial joint space (MJS), lateral joint space (LJS), superior joint space (SJS), and anterior joint space (AJS) measured in the 2D CBCT and in the 3D models (P < 0.05). The case group had significantly smaller SJS compared to the controls on both nondeviation side (P = 0.009) and deviation side (P = 0.004). In the case group, the nondeviation SRA was significantly larger than the deviation side (P = 0.009). There was no significant difference in the coronal condylar width (CCW) in either group. In addition, the anterior disc displacement (ADD) was more likely to occur on the deviated side in the case group. In conclusion, the 3D measurement method is more accurate and effective for clinicians to investigate the morphology of TMJ than the 2D method.