Direct PCR amplification of various modified DNAs having amino acids: convenient preparation of DNA libraries with high-potential activities for in vitro selection

Combining recombinase polymerase amplification with tyrosine modified 2'-deoxyuridine-5'-triphosphate for direct voltammetric detection of double-stranded DNA: Application to potato pathogen Dickeya solani

The approach based on a combination of isothermal recombinase polymerase amplification (RPA), 2'-deoxyuridine-5'-triphosphate modified with tyrosine aromatic group (dUTP-Y1), and direct voltammetric detection of RPA product carrying electroactive labels was successfully applied to the potato pathogen Dickeya solani. The artificial nucleotide dUTP-Y1 demonstrated a good compatibility with RPA, enabling by targeting a section of D. solani genome with a unique sequence to produce the full-size modified products at high levels of substitution of dTTP by dUTP-Y1 (up to 80-90 %) in the reaction mixture. The optimized procedure of square wave voltammetry allowed to reliably detect the product generated by RPA at 80 % substitution of dTTP by dUTP-Y1 (dsDNA-Y1) in microliter sample volumes on the surface of disposable carbon screen printed electrodes at the potential of about 0.6 V. The calibration curve for the amplicon detection was linear in coordinates 'Ip, A vs. Log (c, M)' within the 0.05-1 μM concentration range. The limit of detection for dsDNA-Y1 was estimated as 8 nM. The sensitivity of the established electrochemical approach allowed to detect amplicons generated in a single standard 50 μL RPA reaction after their purification with silica-coated magnetic beads. The overall detectability of D. solani with the suggested combination of RPA and voltammetric registration of dsDNA-Y1 can be as low as a few copies of bacterial genome per standard reaction. In total, amplification, purification, and electrochemical detection take about 120-150 min. Considering the potential of direct electrochemical analysis for miniaturization, as well as compliance with low-cost and low-power requirements, the findings provide grounds for future development of microfluidic devices integrating isothermal amplification, amplicon purification and detection based on the tyrosine modified nucleotide for the purpose of 'on-site' detection of various pathogens.

Superanionic DNA: enzymatic synthesis of hypermodified DNA bearing four different anionic substituents at all four nucleobases

We designed and synthesized a set of four 2'-deoxyribonucleoside 5'-O-triphosphates (dNTPs) derived from 5-substituted pyrimidines and 7-substituted 7-deazapurines bearing anionic substituents (carboxylate, sulfonate, phosphonate, and phosphate). The anion-linked dNTPs were used for enzymatic synthesis of modified and hypermodified DNA using KOD XL DNA polymerase containing one, two, three, or four modified nucleotides. The polymerase was able to synthesize even long sequences of >100 modified nucleotides in a row by primer extension (PEX). We also successfully combined two anionic and two hydrophobic dNTPs bearing phenyl and indole moieties. In PCR, the combinations of one or two modified dNTPs gave exponential amplification, while most of the combinations of three or four modified dNTPs gave only linear amplification in asymmetric PCR. The hypermodified ONs were successfully re-PCRed and sequenced by Sanger sequencing. Biophysical studies including hybridization, denaturation, CD spectroscopy and molecular modelling and dynamics suggest that the presence of anionic modifications in one strand decreases the stability of duplexes while still preserving the B-DNA conformation, whilst the DNA hypermodified in both strands adopts a different secondary structure.

Accelerated Discovery of Potent Bioactive anti-TNFα Aptamers by Microbead-Assisted Capillary Electrophoresis (MACE)-SELEX

Dysregulation of tumor necrosis factor-α (TNFα), a pro-inflammatory cytokine, causes several diseases, making it an important therapeutic target. Here, we identified a novel DNA aptamer against human TNFα using in vitro selection, which included a high exclusion pressure process against non-binding and weak binders through microbead-assisted capillary electrophoresis (MACE) in only three rounds. Among the 15 most enriched aptamers, Apt14 exhibited the highest inhibitory activity for the interaction between TNFα and its cognate receptor in mouse L929 cells. For further improving the bioactivity of the aptamer, dimerization programed by hybridization was evaluated, resulting in the Apt14 dimer exhibited a twofold higher binding affinity and stronger inhibition compared to the monomer counterpart. Rapid identification of bioactive aptamers using MACE in combination with facile dimerization by hybridization accelerates the discovery of novel bioactive aptamers, paving the way toward replacing current monoclonal antibody therapy with the less expensive and non-immunogenic aptamer therapy.

Systematic study of constraints imposed by modified nucleoside triphosphates with protein-like side chains for use in in vitro selection

Successful selection of modified DNAzymes depends on the potential for modified nucleoside triphosphates (dNTPs) to replace their unmodified counterparts in enzyme catalyzed primer extension reactions and, once incorporated, to serve as template bases for information transfer prior to PCR amplification. To date, the most densely modified DNAzymes have been selected from three modified dNTPs: 8-histaminyl-deoxyadenosine (dA^imTP), 5-guanidinoallyl-deoxyuridine (dU^gaTP), and 5-aminoallyl-deoxycytidine (dC^aaTP) to provide several RNA-cleaving DNAzymes with greatly enhanced rate constants compared to unmodified counterparts. Here we report biophysical and enzymatic properties of these three modified nucleosides in the context of specific oligonucleotide sequences to understand how these three modified nucleobases function in combinatorial selection. The base-pairing abilities of oligonucleotides bearing one or three modified nucleosides were investigated by thermal denaturation studies and as templates for enzymatic polymerization with both modified and unmodified dNTPs. While we address certain shortcomings in the use of modified dNTPs, we also provide key evidence of faithful incorporation and enzymatic read-out, which strongly supports their continued use in in vitro selection.

Alkaline-tolerant RNA aptamers useful to purify acid-sensitive antibodies in neutral conditions

Recently, several oligonucleotides have been launched for clinical use and a number of therapeutic oligonucleotides are under clinical trials. Aptamer is one of the oligonucleotide therapeutics and has received a lot of attention as a new technology and an efficacious pharmaceutical compound comparable to antibody. Aptamer could be used for various purposes, not only therapeutics but also diagnostics, and applicable to affinity chromatography as a carrier molecule to purify proteins of interest. Here we demonstrate the usage and advantages of RNA aptamer to Fc region of human IgG (i.e., IgG aptamer) for purification of human antibodies. IgG aptamer requires divalent cations for binding to IgG and bound IgG dissociates easily upon treatment with chelating reagent, such as EDTA, under neutral conditions. This elution step is very mild and advantageous for maintaining active conformations of therapeutic antibodies compared to the widely used affinity purification with Protein A/G, which requires acidic elution that often damages the active conformation of antibodies. In fact, of several monoclonal antibodies tested, three antibodies were prone to aggregate on acidic elution from the Protein A/G resin, while remained fully active upon neutral elution from the IgG aptamer resin. The IgG aptamer was fully manipulated to alkaline resistant by ribose 2'-modifications, and thereby reusable numerous times with 1 N NaOH washing. The capacity of the aptamer resin to bind IgG was equivalent to that of the Protein A/G resin. Therefore, the IgG aptamer will provide us with a unique tool to uncover and purify human monoclonal antibodies, which hold therapeutic potential but lose the activity upon acidic elution from Protein A/G-based affinity resin.

Modified Nucleoside Triphosphates for In-vitro Selection Techniques

The development of SELEX (Selective Enhancement of Ligands by Exponential Enrichment) provides a powerful tool for the search of functional oligonucleotides with the ability to bind ligands with high affinity and selectivity (aptamers) and for the discovery of nucleic acid sequences with diverse enzymatic activities (ribozymes and DNAzymes). This technique has been extensively applied to the selection of natural DNA or RNA molecules but, in order to improve chemical and structural diversity as well as for particular applications where further chemical or biological stability is necessary, the extension of this strategy to modified oligonucleotides is desirable. Taking into account these needs, this review intends to collect the research carried out during the past years, focusing mainly on the use of modified nucleotides in SELEX and the development of mutant enzymes for broadening nucleoside triphosphates acceptance. In addition, comments regarding the synthesis of modified nucleoside triphosphate will be briefly discussed.

Synthesis and Enzymatic Incorporation of Modified Deoxyuridine Triphosphates

To expand the chemical functionality of DNAzymes and aptamers, several new modified deoxyuridine triphosphates have been synthesized. An important precursor that enables this aim is 5-aminomethyl dUTP, whereby the pendent amine serves as a handle for further synthetic functionalization. Five functional groups were conjugated to 5-aminomethyl dUTP. Incorporation assays were performed on several templates that demand 2-5 sequential incorporation events using several commercially available DNA polymerases. It was found that Vent (exo-) DNA polymerase efficiently incorporates all five modified dUTPs. In addition, all nucleoside triphosphates were capable of supporting a double-stranded exponential PCR amplification. Modified PCR amplicons were PCR amplified into unmodified DNA and sequenced to verify that genetic information was conserved through incorporation, amplification, and reamplification. Overall these modified dUTPs represent new candidate substrates for use in selections using modified nucleotide libraries.

Nucleoside triphosphates--from synthesis to biochemical characterization

The traditional strategy for the introduction of chemical functionalities is the use of solid-phase synthesis by appending suitably modified phosphoramidite precursors to the nascent chain. However, the conditions used during the synthesis and the restriction to rather short sequences hamper the applicability of this methodology. On the other hand, modified nucleoside triphosphates are activated building blocks that have been employed for the mild introduction of numerous functional groups into nucleic acids, a strategy that paves the way for the use of modified nucleic acids in a wide-ranging palette of practical applications such as functional tagging and generation of ribozymes and DNAzymes. One of the major challenges resides in the intricacy of the methodology leading to the isolation and characterization of these nucleoside analogues. In this video article, we present a detailed protocol for the synthesis of these modified analogues using phosphorous(III)-based reagents. In addition, the procedure for their biochemical characterization is divulged, with a special emphasis on primer extension reactions and TdT tailing polymerization. This detailed protocol will be of use for the crafting of modified dNTPs and their further use in chemical biology.

In vitro selection of BNA (LNA) aptamers

Recently, we achieved the first in vitro selection of 2'-O,4'-C-methylene bridged/locked nucleic acid (2',4'-BNA/LNA) aptamers. High-affinity thrombin-binding aptamers (TBAs) were obtained from DNA-based libraries containing 2'-O,4'-C-methylene-bridged/linked bicyclic ribonucleotides (B/L nucleotides) in the 5'-primer region, using the method of capillary electrophoresis systematic evolution of ligands by exponential enrichment (CE-SELEX). Furthermore, a similar selection protocol could provide TBAs that contain B/L nucleotides in both primer and random regions. We review technical challenges involved in the generation of various BNA libraries using analogs of B/L nucleoside-5'-triphosphate and polymerase variants and also discuss applications of these libraries to the selection of BNA (LNA) aptamers, as well as future prospects for their therapeutic and diagnostic uses.

Deoxynucleoside triphosphates bearing histamine, carboxylic acid, and hydroxyl residues--synthesis and biochemical characterization

Modified nucleoside triphosphates (dA(Hs)TP, dU(POH)TP, and dC(Val)TP) bearing imidazole, hydroxyl, and carboxylic acid residues connected to the purine and pyrimidine bases through alkyne linkers were prepared. These modified dN*TPs were excellent substrates for various DNA polymerases in primer extension reactions. Moreover, the combined use of terminal deoxynucleotidyl transferase (TdT) and the modified dNTPs led to efficient tailing reactions that rival those of natural counterparts. Finally, the triphosphates were tolerated by polymerases under PCR conditions, and the ensuing modified oligonucleotides served as templates for the regeneration of unmodified DNA. Thus, these modified dN*TPs are fully compatible with in vitro selection methods and can be used to develop artificial peptidases based on DNA.

Advances in aptamer screening and small molecule aptasensors

It has been 20 years since aptamer and SELEX (systematic evolution of ligands by exponential enrichment) were described independently by Andrew Ellington and Larry Gold. Based on the great advantages of aptamers, there have been numerous isolated aptamers for various targets that have actively been applied as therapeutic and analytical tools. Over 2,000 papers related to aptamers or SELEX have been published, attesting to their wide usefulness and the applicability of aptamers. SELEX methods have been modified or re-created over the years to enable aptamer isolation with higher affinity and selectivity in more labor- and time-efficient manners, including automation. Initially, most of the studies about aptamers have focused on the protein targets, which have physiological functions in the body, and their applications as therapeutic agents or receptors for diagnostics. However, aptamers for small molecules such as organic or inorganic compounds, drugs, antibiotics, or metabolites have not been studied sufficiently, despite the ever-increasing need for rapid and simple analytical methods for various chemical targets in the fields of medical diagnostics, environmental monitoring, food safety, and national defense against targets including chemical warfare. This review focuses on not only recent advances in aptamer screening methods but also its analytical application for small molecules.

Nucleoside triphosphates--building blocks for the modification of nucleic acids

Nucleoside triphosphates are moldable entities that can easily be functionalized at various locations. The enzymatic polymerization of these modified triphosphate analogues represents a versatile platform for the facile and mild generation of (highly) functionalized nucleic acids. Numerous modified triphosphates have been utilized in a broad palette of applications spanning from DNA-tagging and -labeling to the generation of catalytic nucleic acids. This review will focus on the recent progress made in the synthesis of modified nucleoside triphosphates as well as on the understanding of the mechanisms underlying their polymerase acceptance. In addition, the usefulness of chemically altered dNTPs in SELEX and related methods of in vitro selection will be highlighted, with a particular emphasis on the generation of modified DNA enzymes (DNAzymes) and DNA-based aptamers.

Artificial specific binders directly recovered from chemically modified nucleic acid libraries

Specific binders comprised of nucleic acids, that is, RNA/DNA aptamers, are attractive functional biopolymers owing to their potential broad application in medicine, food hygiene, environmental analysis, and biological research. Despite the large number of reports on selection of natural DNA/RNA aptamers, there are not many examples of direct screening of chemically modified nucleic acid aptamers. This is because of (i) the inferior efficiency and accuracy of polymerase reactions involving transcription/reverse-transcription of modified nucleotides compared with those of natural nucleotides, (ii) technical difficulties and additional time and effort required when using modified nucleic acid libraries, and (iii) ambiguous efficacies of chemical modifications in binding properties until recently; in contrast, the effects of chemical modifications on biostability are well studied using various nucleotide analogs. Although reports on the direct screening of a modified nucleic acid library remain in the minority, chemical modifications would be essential when further functional expansion of nucleic acid aptamers, in particular for medical and biological uses, is considered. This paper focuses on enzymatic production of chemically modified nucleic acids and their application to random screenings. In addition, recent advances and possible future research are also described.

Synthesis of deoxynucleoside triphosphates that include proline, urea, or sulfonamide groups and their polymerase incorporation into DNA

To expand the chemical array available for DNA sequences in the context of in vitro selection, I present herein the synthesis of five nucleoside triphosphate analogues containing side chains capable of organocatalysis. The synthesis involved the coupling of L-proline-containing residues (dU(tP)TP and dU(cP)TP), a dipeptide (dU(FP)TP), a urea derivative (dU(Bpu)TP), and a sulfamide residue (dU(Bs)TP) to a suitably protected common intermediate, followed by triphosphorylation. These modified dNTPs were shown to be excellent substrates for the Vent (exo(-)) and Pwo DNA polymerases, as well as the Klenow fragment of E. coli DNA polymerase I, although they were only acceptable substrates for the 9°N(m) polymerase. All of the modified dNTPs, with the exception of dU(Bpu)TP, were readily incorporated into DNA by the polymerase chain reaction (PCR). Modified oligonucleotides efficiently served as templates for PCR for the regeneration of unmodified DNA. Thermal denaturation experiments showed that these modifications are tolerated in the major groove. Overall, these heavily modified dNTPs are excellent candidates for SELEX.

A divalent metal-dependent self-cleaving DNAzyme with a tyrosine side chain

The enzymatic incorporation of a phenol-modified 2'-deoxyuridine triphosphate gave rise to a modified DNA library that was subsequently used in an in vitro selection for ribophosphodiester-cleaving DNAzymes in the presence of divalent zinc and magnesium cations. After 11 rounds of selection, cloning and sequencing resulted in 14 distinct sequences, the most active of which was Dz11-17PheO. Dz11-17PheO self-cleaved an embedded ribocytidine with an observed rate constant of 0.20 ± 0.02 min(-1) in the presence of 10 mM Mg(2+) and 1 mM Zn(2+) at room temperature. The activity was inhibited at low concentrations of Hg(2+) cations and somewhat higher concentrations of Eu(3+) cations.

Nucleobase modification as redox DNA labelling for electrochemical detection

Basic aspects of DNA electrochemistry with a strong focus on the use of modified nucleobases as redox probes for electrochemical bioanalysis are reviewed. Intrinsic electrochemical properties of nucleobases in combination with artificial redox-active nucleobase modifications are frequently applied in this field. Synthetic approaches (both chemical and enzymatic) to base-modified nucleic acids are briefly summarized and their applications in redox labelling are discussed. Finally, analytical applications including DNA hybridization, primer extension, PCR, SNP typing, DNA damage and DNA-protein interaction analysis are presented (critical review, 91 references).

Transglutaminase-mediated synthesis of a DNA-(enzyme)n probe for highly sensitive DNA detection

A new synthetic strategy for DNA-enzyme conjugates with a novel architecture was explored using a natural cross-linking catalyst, microbial transglutaminase (MTG). A glutamine-donor substrate peptide of MTG was introduced at the 5-position on the pyrimidine of deoxyuridine triphosphate to prepare a DNA strand with multiple glutamine-donor sites by polymerase chain reaction (PCR). A substrate peptide that contained an MTG-reactive lysine residue was fused to the N terminus of a thermostable alkaline phoshatase from Pyrococcus furiosus (PfuAP) by genetic engineering. By combining enzymatically the substrate moieties of MTG introduced to the DNA template and the recombinant enzyme, a DNA-(enzyme)(n) conjugate with 1:n stoichiometry was successfully obtained. The enzyme/DNA ratio of the conjugate increased as the benzyloxycarbonyl-L-glutaminylglycine (Z-QG) moiety increased in the DNA template. The potential utility of the new conjugate decorated with signaling enzymes was validated in a dot blot hybridization assay. The DNA-(enzyme)(n) probe could clearly detect 10(4) copies of the target nucleic acid with the complementary sequence under harsh hybridization conditions, thereby enabling a simple detection procedure without cumbersome bound/free processes associated with a conventional hapten-antibody reaction-based DNA-detection system.

Protein-inspired modified DNAzymes: dramatic effects of shortening side-chain length of 8-imidazolyl modified deoxyadenosines in selecting RNaseA mimicking DNAzymes

The discovery of imidazole/amine-functionalized DNAzymes that efficiently cleave RNA independently of divalent metal cations (M(2+)) and cofactors underscores the importance of expanding the catalytic repertoire with modified nucleosides. Considerable effort has gone into defining polymerase tolerances of various modified dNTPs for synthesizing and amplifying modified DNA. While long linkers are generally found to enhance incorporation and therefore increase sequence space, shorter linkers may reduce the entropic penalty paid for orienting catalytic functionality. Catalytic enhancement ultimately depends on both the functional group and appropriate linkage to the nucleobase. Whether a shorter linker provides enough catalytic enhancement to outweigh the cost of reduced polymerizability can only be determined by the outcome of the selection. Herein, we report the selection of DNAzyme 20-49 (Dz20-49), which depends on amine, guanidine, and imidazole-modified dNTPs. In contrast to previous selections where we used dA(ime)TP (8-(4-imidazolyl)ethylamino-2'-dATP), here we used dA(imm)TP (8-(4-imidazolyl)methylamino-2'-dATP), in which the linker arm is shortened by one methylene group. Although the most active clone, Dz20-49, was absolutely dependent on the incorporation of either dA(imm)p or dA(ime)p, it catalyzed cofactor independent self-cleavage with a rate constant of 3.1 ± 0.3 × 10(-3) min(-1), a value not dissimilar from unmodified catalysts and strikingly inferior to modified catalysts selected with dA(ime)TP. These results demonstrate that very subtle differences in modified nucleotide composition may dramatically effect DNAzyme selection.

Study on suitability of KOD DNA polymerase for enzymatic production of artificial nucleic acids using base/sugar modified nucleoside triphosphates

Recently, KOD and its related DNA polymerases have been used for preparing various modified nucleic acids, including not only base-modified nucleic acids, but also sugar-modified ones, such as bridged/locked nucleic acid (BNA/LNA) which would be promising candidates for nucleic acid drugs. However, thus far, reasons for the effectiveness of KOD DNA polymerase for such purposes have not been clearly elucidated. Therefore, using mutated KOD DNA polymerases, we studied here their catalytic properties upon enzymatic incorporation of nucleotide analogues with base/sugar modifications. Experimental data indicate that their characteristic kinetic properties enabled incorporation of various modified nucleotides. Among those KOD mutants, one achieved efficient successive incorporation of bridged nucleotides with a 2′-ONHCH₂CH₂-4′ linkage. In this study, the characteristic kinetic properties of KOD DNA polymerase for modified nucleoside triphosphates were shown, and the effectiveness of genetic engineering in improvement of the enzyme for modified nucleotide polymerization has been demonstrated.

Cleavage of adenine-modified functionalized DNA by type II restriction endonucleases

A set of 6 base-modified 2'-deoxyadenosine derivatives was incorporated to diverse DNA sequences by primer extension using Vent (exo-) polymerase and the influence of the modification on cleavage by diverse restriction endonucleases was studied. While 8-substituted (Br or methyl) adenine derivatives were well tolerated by the restriction enzymes and the corresponding sequences were cleaved, the presence of 7-substituted 7-deazaadenine in the recognition sequence resulted in blocking of cleavage by some enzymes depending on the nature and size of the 7-substituent. All sequences with modifications outside of the recognition sequence were perfectly cleaved by all the restriction enzymes. The results are useful both for protection of some sequences from cleavage and for manipulation of functionalized DNA by restriction cleavage.

Novel strategies for the site-specific covalent labelling of nucleic acids

To broaden the scope of applications in DNA nano- and biotechnology, material science, diagnostics and molecular recognition the functionalization of DNA is of utmost importance. In the last decade many new methods have been developed to achieve this goal. Apart from the direct chemical synthesis of modified DNA by automated phosphoramidite chemistry incorporation of labelled triphosphates and the post-synthetic labelling approach evolved as valuable methods. New bioorthogonal reactions as Diels-Alder, click and Staudinger ligations pushed forward the post-synthetic approach as new insights into DNA polymerase substrate specificity allowed generation and amplification of labelled DNA strands. These novel developments are summarized herein.

Synthesis of 8-bromo-, 8-methyl- and 8-phenyl-dATP and their polymerase incorporation into DNA

dATP derivatives bearing Br, Me or Ph groups in position 8 were prepared and tested as substrates for DNA polymerases to show that 8-Br-dATP and 8-Me-dATP were efficiently incorporated, while 8-Ph-dATP was a poor substrate due to its bulky Ph group.

Systematic analysis of enzymatic DNA polymerization using oligo-DNA templates and triphosphate analogs involving 2',4'-bridged nucleosides

In order to systematically analyze the effects of nucleoside modification of sugar moieties in DNA polymerase reactions, we synthesized 16 modified templates containing 2',4'-bridged nucleotides and three types of 2',4'-bridged nucleoside-5'-triphospates with different bridging structures. Among the five types of thermostable DNA polymerases used, Taq, Phusion HF, Vent(exo-), KOD Dash and KOD(exo-), the KOD Dash and KOD(exo-) DNA polymerases could smoothly read through the modified templates containing 2'-O,4'-C-methylene-linked nucleotides at intervals of a few nucleotides, even at standard enzyme concentrations for 5 min. Although the Vent(exo-) DNA polymerase also read through these modified templates, kinetic study indicates that the KOD(exo-) DNA polymerase was found to be far superior to the Vent(exo-) DNA polymerase in accurate incorporation of nucleotides. When either of the DNA polymerase was used, the presence of 2',4'-bridged nucleotides on a template strand substantially decreased the reaction rates of nucleotide incorporations. The modified templates containing sequences of seven successive 2',4'-bridged nucleotides could not be completely transcribed by any of the DNA polymerases used; yields of longer elongated products decreased in the order of steric bulkiness of the modified sugars. Successive incorporation of 2',4'-bridged nucleotides into extending strands using 2',4'-bridged nucleoside-5'-triphospates was much more difficult. These data indicate that the sugar modification would have a greater effect on the polymerase reaction when it is adjacent to the elongation terminus than when it is on the template as well, as in base modification.

SELEX with modified nucleotides

Aptamers, a promising new class of therapeutics, are single-stranded oligonucleotides generated via an in vitro selection process that bind to and inhibit the activity of target proteins in a manner similar to therapeutic antibodies. In order to enhance the drug-like character of aptamers, oligonucleotide libraries containing modified nucleotides are increasingly being used for selection. Principally, the choice of modifications aims to increase aptamer potency by enhancing nuclease-resistance, or increasing target affinity by providing more target recognition functionality or generating more stable aptamer structures.

Arginine-modified DNA aptamers that show enantioselective recognition of the dicarboxylic acid moiety of glutamic acid

We have screened glutamic acid-binding aptamers from a modified DNA pool containing arginine residues using the method of systematic evolution of ligands by exponential enrichment (SELEX). Thirty-one modified DNA molecules were obtained from the enriched pool after the 17th round of selection, and their binding affinities for the target were evaluated by binding assays using affinity gels. Three modified DNA molecules having higher affinity were sequenced and we determined their affinity and specificity for the target by surface plasmon resonance (SPR) measurements. The SPR studies indicated that two of these three aptamers distinguished the dicarboxylic acid moiety of the D-isomer from that of the L-isomer; however, the third aptamer did not show enantioselectivity.

Cross-coupling reactions of nucleoside triphosphates followed by polymerase incorporation. Construction and applications of base-functionalized nucleic acids

Construction of functionalized nucleic acids (DNA or RNA) via polymerase incorporation of modified nucleoside triphosphates is reviewed and selected applications of the modified nucleic acids are highlighted. The classical multistep approach for the synthesis of modified NTPs by triphosphorylation of modified nucleosides is compared to the novel approach consisting of direct aqueous cross-coupling reactions of unprotected halogenated nucleoside triphosphates. The combination of cross-coupling of NTPs with polymerase incorporation gives an efficient and straightforward two-step synthesis of modified nucleic acids. Primer extension using biotinylated templates followed by separation using streptavidine-coated magnetic beads and DNA duplex denaturation is used for preparation of modified single stranded oligonucleotides. Examples of using this approach for electrochemical DNA labelling and bioanalytical applications are given.

DNA polymerase recognition of 2'-deoxy-2'-fluoroarabinonucleoside 5'-triphosphates (2'F-araNTPs)

We examined the ability of 2'-deoxy-2'-fluroarabinonucleoside 5'-triphosphates (2'F-araNTPs) to serve as substrates of various DNA polymerases. In addition, we also examined the ability of these polymerases to accept DNA-FANA (2'-deoxy-2'-fluoroarabinonucleic acids) chimeras as template strands while synthesizing a DNA or FANA-DNA complementary strand. We provide preliminary data demonstrating that 2'F-araNTPs are indeed substrates of several DNA polymerases, and that FANA-DNA chimeric templates are generally well recognized by these polymerase enzymes.

Ferrocenylethynyl derivatives of nucleoside triphosphates: synthesis, incorporation, electrochemistry, and bioanalytical applications

Modified dATP (2'-deoxyadenosine-5'-triphosphate) and dUTP (2'-deoxyuridine-5'-triphosphate) bearing ferrocene (Fc) labels linked via a conjugate acetylene spacer were prepared by single-step aqueous-phase cross-coupling reactions of 7-iodo-7-deaza-dATP or 5-iodo-dUTP with ethynylferrocene. The Fc-labeled dNTPs were good substrates for DNA polymerases and were efficiently incorporated to DNA by primer extension (PEX). Electrochemical analysis of the 2'-deoxyribonucleoside triphosphates (dNTPs) and PEX products revealed significant differences in redox potentials of the Fc label bound either to U or to 7-deazaA and between isolated dNTPs and conjugates incorporated to DNA. Prospective bioanalytical applications are outlined.

An efficient method for the construction of functionalized DNA bearing amino acid groups through cross-coupling reactions of nucleoside triphosphates followed by primer extension or PCR

Single-step aqueous cross-coupling reactions of nucleobase-halogenated 2'-deoxynucleosides (8-bromo-2'-deoxyadenosine, 7-iodo-7-deaza-2'-deoxyadenosine, or 5-iodo-2'-deoxy-uridine) or their 5'-triphosphates with 4-boronophenylalanine or 4-ethynylphenylalanine have been developed and used for efficient synthesis of modified 2'-deoxynucleoside triphosphates (dNTPs) bearing amino acid groups. These dNTPs were then tested as substrates for DNA polymerases for construction of functionalized DNA through primer extension and PCR. While 8-substituted adenosine triphosphates were poor substrates for DNA polymerases, the corresponding 7-substituted 7-deazaadenine and 5-substituted uracil nucleotides were efficiently incorporated in place of dATP or dTTP, respectively, by Pwo (Pyrococcus woesei) DNA polymerase. Nucleotides bearing the amino acid connected through the less bulky acetylene linker were incorporated more efficiently than those directly linked through a more bulky phenylene group. In addition, combinations of modified dATPs and dTTPs were incorporated by Pwo polymerase. Novel functionalized DNA duplexes bearing amino acid moieties were prepared by this two-step approach. PCR can be used for amplification of duplexes bearing large number of modifications, while primer extension is suitable for introduction of just one or several modifications in a single DNA strand.

SELEX--a (r)evolutionary method to generate high-affinity nucleic acid ligands

SELEX stands for systematic evolution of ligands by exponential enrichment. This method, described primarily in 1990 [Ellington, A.D., Szostak, J.W., 1990. In vitro selection of RNA molecules that bind specific ligands. Nature 346, 818-822; Tuerk, C., Gold, L., 1990. Systematic evolution of ligands by exponential enrichment: RNA ligands to bacteriophage T4 DNA polymerase. Science 249, 505-510] aims at the development of aptamers, which are oligonucleotides (RNA or ssDNA) binding to their target with high selectivity and sensitivity because of their three-dimensional shape. Aptamers are all new ligands with a high affinity for considerably differing molecules ranging from large targets as proteins over peptides, complex molecules to drugs and organic small molecules or even metal ions. Aptamers are widely used, including medical and pharmaceutical basic research, drug development, diagnosis, and therapy. Analytical and separation tools bearing aptamers as molecular recognition and binding elements are another big field of application. Moreover, aptamers are used for the investigation of binding phenomena in proteomics. The SELEX method was modified over the years in different ways to become more efficient and less time consuming, to reach higher affinities of the aptamers selected and for automation of the process. This review is focused on the development of aptamers by use of SELEX and gives an overview about technologies, advantages, limitations, and applications of aptamers.

Construction of saccharide-modified DNAs by DNA polymerase

Novel deoxyribonucleotide triphosphates bearing maltose or lactose groups were synthesized as substrates for DNA polymerase. The incorporation efficiencies of these modified substrates were investigated in both primer extension reactions and PCR. The stability and conformation of saccharide-modified dsDNAs were assessed by UV absorbance melting experiments and CD analysis. Enzymatic incorporation of saccharide-modified substrates can be used for the efficient production of saccharide-modified DNAs.

Systematic characterization of 2'-deoxynucleoside- 5'-triphosphate analogs as substrates for DNA polymerases by polymerase chain reaction and kinetic studies on enzymatic production of modified DNA

We synthesized C5-modified analogs of 2'-deoxyuridine triphosphate and 2'-deoxycytidine triphosphate and investigated them as substrates for PCRs using Taq, Tth, Vent(exo-), KOD Dash and KOD(exo-) polymerases and pUC 18 plasmid DNA as a template. These assays were performed on two different amplifying regions of pUC18 with different T/C contents that are expected to have relatively high barriers for incorporation of either modified dU or dC. On the basis of 260 different assays (26 modified triphosphates x 5 DNA polymerases x 2 amplifying regions), it appears that generation of the full-length PCR product depends not only on the chemical structures of the substitution and the nature of the polymerase but also on whether the substitution is on dU or dC. Furthermore, the template sequence greatly affected generation of the PCR product, depending on the combination of the DNA polymerase and modified triphosphate. By examining primer extension reactions using primers and templates containing C5-modified dUs, we found that a modified dU at the 3' end of the elongation strand greatly affects the catalytic efficiency of DNA polymerases, whereas a modified dU opposite the elongation site on the template strand has less of an influence on the catalytic efficiency.