Alkanethiol containing glycopolymers: A tool for the detection of lectin binding

Glycosylated Conductive Polymer: A Multimodal Biointerface for Studying Carbohydrate-Protein Interactions

Carbohydrate-protein interactions occur through glycoproteins, glycolipids, or polysaccharides displayed on the cell surface with lectins. However, studying these interactions is challenging because of the complexity and heterogeneity of the cell surface, the inherent structural complexity of carbohydrates, and the typically weak affinities of the binding reactions between the lectins and monovalent carbohydrates. The lack of chromophores and fluorophores in carbohydrate structures often drives such investigations toward fluorescence labeling techniques, which usually require tedious and complex synthetic work to conjugate fluorescent tags with additional risk of altering the reaction dynamics. Probing these interactions directly on the cell surface is even more difficult since cells could be too fragile for labeling or labile dynamics could be affected by the labeled molecules that may interfere with the cellular activities, resulting in unwanted cell responses. In contrast, label-free biosensors allow real-time monitoring of carbohydrate-protein interactions in their natural states. A prerequisite, though, for this strategy to work is to mimic the coding information on potential interactions of cell surfaces onto different biosensing platforms, while the complementary binding process can be transduced into a useful signal noninvasively. Through carbohydrate self-assembled monolayers and glycopolymer scaffolds, the multivalency of the naturally existing simple and complex carbohydrates can be mimicked and exploited with label-free readouts (e.g., optical, acoustic, mechanical, electrochemical, and electrical sensors), yet such inquiries reflect only limited aspects of complicated biointeraction processes due to the unimodal transduction. In this Account, we illustrate that functionalized glycosylated conductive polymer scaffolds are the ideal multimodal biointerfaces that not only simplify the immobilization process for surface fabrication via electrochemical polymerization but also enable the simultaneous analysis of the binding events with orthogonal electrical, optical, or mass sensing label-free readouts. We established this approach using polyaniline and polythiophene as examples. Two general methods were demonstrated for glycosylated polymer fabrications (i.e., electropolymerization of monomer bearing α-mannoside residues or click chemistry based mannose conjugation to electrochemically preformed quinone fused polymer with potential to introduce different carbohydrate moieties and construct glycan arrays in a similar manner). Their conjugated π system extending over a large number of recurrent monomer units renders them sensitive optoelectronic materials. The carbohydrate-protein interactions on the side chain could disrupt the electrostatic, H-bonding, steric, or van der Waals interactions within or between polymers, leading to a change of conductivity or optical absorption of the conductive polymers. This will allow concurrent interrogation of these interactions with adjoining biological processes and mechanisms in multimodal fashion. Furthermore, the functionalized glycosylated conductive polymers can be designed and synthesized with controlled oxidation states, desired ionic dopants, and the imperative density and orientation of the sugar ligands that enable the assessment of differential receptor binding profiles of carbohydrate-protein interactions with much more detailed information and high accuracy. Finally, the glycosylated biosensing interfaces were successfully validated for their applications in Gram-negative bacterial detection, antibiotic resistance studies, and antimicrobial susceptibility assays, all based on inferring carbohydrate-protein interactions directly on cell surfaces, thus illustrating their potential uses in infectious disease research, clinical diagnostics, and environmental monitoring of harmful pathogens.

Study of bacterial adhesion on different glycopolymer surfaces by quartz crystal microbalance with dissipation

Protein-carbohydrate interactions are involved in a wide variety of cellular recognition processes including cell growth regulation, differentiation and adhesion, the immune response, and viral or bacterial infections. A common way for bacteria to achieve adhesion is through their fimbriae which possess cellular lectins that can bind to complementary carbohydrates on the surface of the host tissues. In this work, we synthesized glycopolymers using reversible addition-fragmentation chain transfer (RAFT) polymerization which were subsequently immobilized on a sensor surface for studies of bacterial adhesion by quartz crystal microbalance with dissipation (QCM-D). Ricinus communis Agglutinin (RCA120), a galactose specific lectin, was first studied by QCM-D to determine the specific lectin interactions to the different glycopolymers-treated surfaces. Subsequently, Pseudomonas aeruginosa PAO1 (a Gram-negative bacterium with galactose-specific binding C-type lectin (PA-IL)) and Escherichia coli K-12 (a Gram-negative bacterium with mannose-specific binding lectin) were then used as model bacteria to study bacterial adhesion mechanisms on different polymer-treated sensor surfaces by the coupled resonance theory. Our results showed that lectin-carbohydrate interactions play significant roles in comparison to the nonspecific interactions, such as electrostatic interactions. A significantly higher amount of P. aeruginosa PAO1 could adhere on the glycopolymer surface with strong contact point stiffness as compared to E. coli K-12 on the same surface. Furthermore, in comparison to E. coli K-12, the adhesion of P. aeruginosa PAO1 to the glycopolymers was found to be highly dependent on the presence of calcium ions due to the specific C-type lectin interactions of PA-IL, and also the enhanced bacterial adhesion is attributed to the stiffer glycopolymer surface in higher ionic strength condition.

Complex thiolated mannose/quinone film modified on EQCM/Au electrode for recognizing specific carbohydrate-proteins

A complex thiolated mannose (TM)/quinone functionalised polythiophene (QFPT) thin film was modified on EQCM/Au electrode for recognition of specific carbohydrate-proteins. Different lectins such as those from Sambucus nigra (elder berry), Arachis hypogaea (peanut), Ulex europaeus (gorse, furze), Triticum vulgaris and Concanavalin A (ConA) was used for probes to evaluate bio-sensing performance of the TM/QFPT film. A specific response was observed for ConA from lectins when using the TM/QFPT film as sensing material and employing either elelctrochemical or the QCM method. No response was detected between thiolated mannose and other lectins. The linear relationship between current and ConA concentration is in the range of 0.5-17.5 nM by the elelctrochemical method and the linear relationship between frequency change and ConA concentration is in the range of 0.5-4.5 nM by the QCM method. This shows that the TM/QFPT-modified EQCM biosensor presents a paralleled determination by using electrochemical and the QCM method. The elelctrochemical method of the biosensor can be applicable in a large concentration range and its frequency change can be more precise.

Self-assembled glucosamine monolayers as biomimetic receptors for detecting WGA lectin and influenza virus with a quartz crystal microbalance

N-Acetylglucosamine (GlcNAc) is a natural ligand that interacts with the binding sites of wheat germ agglutinin (WGA) lectin. For immobilization, GlcNAc was linked to p-nitrophenol, and the nitro group was reduced and then bound to cysteine via two-step synthesis. Scanning tunneling microscopy studies revealed proper immobilization of the ligand on the gold surface of a quartz crystal microbalance (QCM) via the cysteine S-H bond as well as binding between GlcNAc and WGA. QCM measurements revealed that maximum sensitivity towards WGA can only be achieved when co-immobilizing one part ligand and 5,000 parts cysteine for steric reasons, because it allows binding of a protein monolayer on the surface. Langmuir-type treatment of the binding isotherm suggests two different binding ranges for WGA and the GlcNAc monolayer, because at concentrations of WGA below 1 μm the Gibbs energy for the binding process is one third higher than that at concentrations above this value. The same systems can be transferred to first proof-of-concept measurements with different strains of influenza A virus (H5N3, H5N1, H1N3) because GlcNAc is part of the oligosaccharide ligand responsible for the first binding step. Thus, it constitutes both a suitable tool for rapid analysis and the basis for future theoretical calculations of ligand-virus interactions.

Selective protein separation using siliceous materials with a trimethoxysilane-containing glycopolymer

A copolymer with α-D-mannose (Man) and trimethoxysilane (TMS) units was synthesized for immobilization on siliceous matrices such as a sensor cell and membrane. Immobilization of the trimethoxysilane-containing copolymer on the matrices was readily performed by incubation at high heat. The recognition of lectin by poly(Man-r-TMS) was evaluated by measurement with a quartz crystal microbalance (QCM) and adsorption on an affinity membrane, QCM results showed that the mannose-binding protein, concanavalin A, was specifically bound on a poly(Man-r-TMS)-immobilized cell with a higher binding constant than bovine serum albumin. The amount of concanavalin A adsorbed during permeation through a poly(Man-r-TMS)-immobilized membrane was higher than that through an unmodified membrane. Moreover, the concanavalin A adsorbed onto the poly(Man-r-TMS)-immobilized membrane was recoverable by permeation of a mannose derivative at high concentration.

Protein adsorption on a glycosylated polyacrylonitrile surface: monitoring with QCM and SPR

A simple and efficient method to fabricate a glycosylated surface on a polyacrylonitrile-based film is described. Construction and protein adsorption processes were monitored in situ using a QCM. A PANCHEMA film was deposited on the gold surface of the quartz crystal, and the glycosylated surface was then constructed through surface modification. Con A and BSA were used as probes to study the specificity of this surface to proteins. It can recognize Con A, while showing no specific interaction with BSA. The binding affinity indicates the presence of strong multivalent interactions between Con A and the glucose residues (cluster glycoside effect). Reproducibility and repeatability of the glycosylated polymer surface are sufficient to allow specific adsorption of Con A.