Systematic evaluation of a tissue-engineered bone for maxillary sinus augmentation in large animal canine model

Trends of regenerative tissue engineering for oral and maxillofacial reconstruction in veterinary medicine

Oral and maxillofacial (OMF) defects are not limited to humans and are often encountered in other species. Reconstructing significant tissue defects requires an excellent strategy for efficient and cost-effective treatment. In this regard, tissue engineering comprising stem cells, scaffolds, and signaling molecules is emerging as an innovative approach to treating OMF defects in veterinary patients. This review presents a comprehensive overview of OMF defects and tissue engineering principles to establish proper treatment and achieve both hard and soft tissue regeneration in veterinary practice. Moreover, bench-to-bedside future opportunities and challenges of tissue engineering usage are also addressed in this literature review.

Structural insights into the binding of zoledronic acid with RANKL via computational simulations

Zoledronic acid (ZOL) inhibits receptor activator of nuclear factor-κB ligand (RANKL) and reduces bone turnover. This plays an important role in the development of bisphosphonate-related osteonecrosis of the jaw (BRONJ). Previous reports have shown that ZOL binds to the enzyme farnesyl pyrophosphate synthase (FPPS) to block its activity. However, the mechanism of action of ZOL and its interaction with RANKL is still unclear. In this study, we confirmed that ZOL significantly suppressed the bone remodeling in ZOL-treated rats, investigated whether ZOL could bind to RANKL and examined the interactions between these molecules at the atomic level. Surface plasmon resonance (SPR) assay was performed to validate that ZOL could directly bind to RANKL in a dose dependent manner, and the equilibrium constant was calculated (K_D = 2.28 × 10⁻⁴ M). Then, we used molecular docking simulation to predict the binding site and analyze the binding characteristics of ZOL and RANKL. Through molecular dynamics simulation, we confirmed the stable binding between ZOL and RANKL and observed their dynamic interactions over time. Binding free energy calculations and its decomposition were conducted to obtain the binding free energy −70.67 ± 2.62 kJ/mol for the RANKL–ZOL complex. We identified the key residues of RANKL in the binding region, and these included Tyr217(A), Val277(A), Gly278(A), Val277(B), Gly278(B), and Tyr215(C). Taken together, our results demonstrated the direct interaction between ZOL and RANKL, indicating that the pharmacological action of ZOL might be closely related to RANKL. The design of novel small molecules targeting RANKL might reduce the occurrence of BRONJ.

A Novel Bone Substitute Based on Recombinant Type I Collagen for Reconstruction of Alveolar Cleft

This study aimed to examine the optimal cross-link density of recombinant peptide (RCP) particles, based on human collagen type I, for bone reconstruction in human alveolar cleft. Low- (group 1), medium- (group 2), and high- (group 3) cross-linked RCP particles were prepared by altering the duration of the heat-dependent dehydration reaction. Rat palatine fissures (n = 45), analogous to human congenital bone defects, were examined to evaluate the potential of bone formation by the three different RCP particles. Microcomputed tomography images were obtained to measure bone volume and bone mineral density at 4, 8, 12, and 16 weeks post grafting. Specimens were obtained for histological analysis at 16 weeks after grafting. Additionally, alkaline phosphatase and tartrate acid phosphatase staining were performed to visualize the presence of osteoblasts and osteoclasts. At 16 weeks, bone volume, bone mineral density, and new bone area measurements in group 2 were significantly higher than in any other group. In addition, the number of osteoblasts and osteoclasts on the new bone surface in group 2 was significantly higher than in any other group. Our results demonstrated that medium cross-linking was more suitable for bone formation—and could be useful in human alveolar cleft repairs as well.

Extracellular vesicles derived from human dental pulp stem cells promote osteogenesis of adipose-derived stem cells via the MAPK pathway

Recent studies have shown that co-culture systems play an important role in bone tissue engineering. In this study, human dental pulp stem cells (hDPSCs) were co-cultured with human adipose-derived stem cells (hADSCs), and osteoblastic phenotypes were found to be enhanced in co-cultures compared with monocultures of hDPSCs or hADSCs. Furthermore, GW4869, an inhibitor of extracellular vesicle (EV) formation, suppressed the mineralization of co-cultured cells. Studies indicate that the therapeutic potential of DPSCs is realized through paracrine action, in which EVs play an important role. To study their role, we successfully obtained and identified hDPSC-derived extracellular vesicles (hDPSC-EVs), and further investigated their effects on hADSCs and the underlying mechanism. hADSCs were stimulated with hDPSC-EVs, which were found to promote the migration and mineralization of hADSCs. Moreover, hDPSC-EVs promoted osteogenic differentiation by enhancing the phosphorylation of ERK 1/2 and JNK in hADSCs. To investigate the specific proteins in EVs that might play a role in hADSC osteogenic differentiation, we performed proteomic analysis of hDPSC-EVs. We determined the top 30 enriched pathways, which notably included the insulin signaling pathway. The number of genes enriched in the insulin signaling pathway was the largest, in addition to the “protein processing in endoplasmic reticulum” term. The MAPK cascade is a typical downstream pathway mediating insulin signaling. To further study the effects of hDPSC-EVs on maxillofacial bone regeneration, we used hDPSC-EVs as a cell-free biomaterial in a model of mandibular defects in rats. To assess the therapeutic potential of EVs, we analyzed their proteome. Animal experiments demonstrated that hDPSC-EVs promoted the regeneration of bone defects. Overall, these results highlight the potential of hDPSC-EVs to induce lineage specific differentiation of hADSCs. The results also indicated the importance of considering hDPSC-EVs as biomimetic materials for clinical translation of treatments for oral maxillofacial defects.

Rat Palatine Fissure: A Suitable Experimental Model for Evaluating Bone Regeneration

IMPACT STATEMENT

The rat palatine fissure is anatomically similar to human alveolar cleft. In this study, we examined potential bone repair by an autologous bone implant and beta-tricalcium phosphate (β-TCP) using rat palatine fissure as a model. Autologous bone chips or β-TCP granules were implanted into the rat palatine fissure. Our model demonstrated that higher bone volume and bone mineral density were achieved with autologous bone graft than with β-TCP. We have provided the first demonstration of the suitability of the rat palatine fissure as the implant site to simulate the transplantation of bone graft materials into human alveolar cleft.

Comparative characterization of mesenchymal stem cells from human dental pulp and adipose tissue for bone regeneration potential

Bone tissue engineering is an area of regenerative medicine that attempts to repair bone defects. Seed cells such as dental pulp stem cells (DPSCs) and adipose tissue-derived stem cells (ADSCs) are two of the most well-characterized cells for bone regeneration because their use involves few ethical constraints and they have the ability to differentiate into multiple cell types, secreting growth factors and depositing mineral. However, bone regeneration ability of these cells remains unclear. This study aimed to compare the bone formation capacity of DPSCs and ADSCs in vitro and in vivo. Studies revealed that DPSCs had enhanced colony-forming ability, higher proliferative ability, stronger migration ability and higher expression of angiogenesis-related genes. They also secreted more vascular endothelial growth factor compared to ADSCs. In contrast, ADSCs grew more slowly compared to DPSCs but exhibited greater osteogenic differentiation potential, higher expression of osteoblast marker genes, and greater mineral deposition. Furthermore, after DPSCs and ADSCs were implanted into a mandibular defect of a rat for 6 weeks, ADSCs showed visible bone tissue as early as week 1 and promoted faster and greater bone regeneration compared to the DPSC group. These results suggest that ADSCs might be more useful than DPSCs for bone regeneration.

Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone

The successful regeneration of functional bone tissue in critical-size defects remains a significant clinical challenge. To address this challenge, synthetic bone scaffolds are widely developed, but remarkably few are translated to the clinic due to poor performance in vivo. Here, it is demonstrated how architectural design of 3D printed scaffolds can improve in vivo outcomes. Ceramic scaffolds with different pore sizes and permeabilities, but with similar porosity and interconnectivity, are implanted in rabbit calvaria for 12 weeks, and then the explants are harvested for microcomputed tomography evaluation of the volume and functionality of newly formed bone. The results indicate that scaffold pores should be larger than 390 µm with an upper limit of 590 µm to enhance bone formation. It is also demonstrated that a bimodal pore topology-alternating large and small pores-enhances the volume and functionality of new bone substantially. Moreover, bone formation results indicate that stiffness of new bone is highly influenced by the scaffold's permeability in the direction concerned. This study demonstrates that manipulating pore size and permeability in a 3D printed scaffold architecture provides a useful strategy for enhancing bone regeneration outcomes.

Optimized beagle model for maxillary sinus floor augmentation via a mini-lateral window with simultaneous implant placement

Objective

This study was performed to establish an optimized beagle model for maxillary sinus floor augmentation via a mini-lateral window with simultaneous implant placement.

Methods

Twelve beagles underwent maxillary sinus floor augmentation via a mini-lateral window with simultaneous implant placement through sites selected by analyzing preoperative cone beam computed tomography (CBCT) images. During the experiment, no maxillary teeth were extracted and the infraorbital nerve was not severed. The osteotomy was only 5 mm in diameter. The implant stability quotient was measured, and postoperative CBCT was used to detect the condition of the sinus membrane and bone augmentation.

Results

The site corresponding to the tip of the highest dental cusp of the maxillary fourth premolar was suitable for the procedure, and the implant site was on the palatal bone plate. All implants achieved good primary stability. Postoperative CBCT showed no sinus membrane perforation, and the implants penetrated into the sinus cavity surrounded by bone substitute.

Conclusion

The herein-described optimized model with mini-lateral osteotomy and without extraction or severing of the infraorbital nerve was minimally invasive, retained more lateral bone of the sinus, and achieved good sinus floor-lifting results. This model is highly reproducible and merits wider application.

Tissue Engineering in Ophthalmology: Implications for Eyelid Reconstruction

PURPOSE

Bioengineering aims to produce functional tissue replacements to repair defects and has been widely investigated over the past few decades. We aimed to review the available literature on the application of tissue engineering in ophthalmology, with a particular focus on ophthalmic plastic surgery and potential applications for eyelid reconstruction.

METHODS

A literature search was performed on the MEDLINE database using the keywords "bioengineering," "tissue engineering," and "ophthalmology." Articles written in English were included.

RESULTS

There is a substantial body of work on tissue engineering of the cornea. Other structures in ophthalmology investigated include the conjunctiva, lacrimal gland, and orbital bone. We also discuss the potential application of tissue engineering in eyelid reconstruction.

CONCLUSION

Tissue engineering represents the future of regenerative and reconstructive medicine, with significant potential applications in ophthalmic plastic surgery.

Growth differentiation factor 15 promotes blood vessel growth by stimulating cell cycle progression in repair of critical-sized calvarial defect

Repair of large bone defects remains a challenge for surgeons, tissue engineering represents a promising approach. However, the use of this technique is limited by delayed vascularization in central regions of the scaffold. Growth differentiation factor 15(GDF15) has recently been reported to be a potential angiogenic cytokine and has an ability to promote the proliferation of human umbilical vein endothelial cells(HUVECs). Whether it can be applied for promoting vascularized bone regeneration is still unknown. In this study, we demonstrated that GDF15 augmented the expression of cyclins D1 and E, induced Rb phosphorylation and E2F-1 nuclear translocation, as well as increased HUVECs proliferation. Furthermore, we also observed that GDF15 promoted the formation of functional vessels at an artificially-induced angiogenic site, and remarkably improved the healing in the repair of critical-sized calvarial defects. Our results confirm the essential role of GDF15 in angiogenesis and suggest its potential beneficial use in regenerative medicine.

In quest of optimal drug-supported and targeted bone regeneration in the cranio facial area: a review of techniques and methods

Craniofacial bone structures are frequently and extensively affected by trauma, tumors, bone infections and diseases, age-related degeneration and atrophy, as well as congenital malformations and developmental anomalies. Consequently, severe encumbrances are imposed on both patients and healthcare systems due to the complex and lengthy treatment duration. The search for alternative methods to bone transplantation, grafting and the use of homologous or heterologous bone thus responds to one of the most significant problems in human medicine. This review focuses on the current consensus of bone-tissue engineering in the craniofacial area with emphasis on drug-induced stem cell differentiation and induced bone regeneration.

Reosseointegration Following Regenerative Therapy of Tissue-Engineered Bone in a Canine Model of Experimental Peri-Implantitis

BACKGROUND

Due to the existence of inflammation and limited osteogenesis on the precontaminated implant surface, reosseointegration is difficult to realize by current therapies. Tissue-engineering strategy has been proved quite effective in intractable bone defect situation.

PURPOSE

This study was designed to see whether the adoption of tissue-engineered bone complex of adipose-derived stem cells (ASCs) and bone morphogenetic protein-2 (BMP-2) gene delivery would work efficiently in the correction of experimental peri-implantitis.

METHODS

All premolars in both side of mandibular were removed from six beagle canines three months before implant placement. Typical peri-implantitis were then induced by three month ligature placement. After the implementation of identical anti-bacterial and mechanical debridement therapy, the shaped peri-implant defect were stuffed with four groups of constructs, as A: beta tricalcium phosphate (β-TCP); B: β-TCP with ASCs; C: β-TCP with enhanced green fluorescent protein gene transduced ASCs (AdGFP-ASCs); and D: β-TCP with bone morphogenetic protein-2 gene-modified ASCs (AdBMP-2-ASCs). Systematic radiographic, micro-CT, and histomorphometrical assessments were performed.

RESULTS

After six months of healing, more bone formation and reosseointegration was found around the implant of groups B and C than group A. And group D further promoted the new bone height and reosseointegration percentage. Moreover, sequential fluorescence labeling tells that group D exhibited the quickest and strongest bone formation on the cleaned implant surface during the entire observation period as compared to the other three groups.

CONCLUSIONS

These data demonstrated that tissue engineered bone of ASCs, BMP-2 gene delivery, and β-TCP could exert powerful therapeutic effect on peri-implantitis as expected, which may suggest a feasible way to maintain the stability and masticatory function of dental implant.

Translational value of sheep as animal model to study sinus augmentation

Sinus augmentation is a routine surgical procedure in dentistry. At present, various animal models are available for the research purpose on this topic. In particular, for the first time, we have performed a morphological study on sheep sinus, using cone beam computed tomography (CBCT), to precisely define the anatomy of the ovine sinus. Then, we compared the sheep and human sinus morphological parameters, in order to uniform the research approach to the sinus augmentation procedures and to standardize this experimental model. Six fresh heads of adult female sheep were studied with CBCT and histologic examination to determine the dimensions and the organization of the ovine maxillary sinus. The comparison of the dimensional values between man and sheep shows evident differences between the two species; CBCT offers detailed information for studying normal maxillary sinus. Human and sheep maxillary sinus show anatomical differences that must be taken into account in experimental procedures.

Bone regeneration by nanohydroxyapatite/chitosan/poly(lactide-co-glycolide) scaffolds seeded with human umbilical cord mesenchymal stem cells in the calvarial defects of the nude mice

In the preliminary study, we have found an excellent osteogenic property of nanohydroxyapatite/chitosan/poly(lactide-co-glycolide) (nHA/CS/PLGA) scaffolds seeded with human umbilical cord mesenchymal stem cells (hUCMSCs) in vitro and subcutaneously in the nude mice. The aim of this study was to further evaluate the osteogenic capacity of nHA/CS/PLGA scaffolds seeded with hUCMSCs in the calvarial defects of the nude mice. Totally 108 nude mice were included and divided into 6 groups: PLGA scaffolds + hUCMSCs; nHA/PLGA scaffolds + hUCMSCs; CS/PLGA scaffolds + hUCMSCs; nHA/CS/PLGA scaffolds + hUCMSCs; nHA/CS/PLGA scaffolds without seeding; the control group (no scaffolds) (n = 18). The scaffolds were implanted into the calvarial defects of nude mice. The amount of new bones was evaluated by fluorescence labeling, H&E staining, and Van Gieson staining at 4 and 8 weeks, respectively. The results demonstrated that the amount of new bones was significantly increased in the group of nHA/CS/PLGA scaffolds seeded with hUCMSCs (p < 0.01). On the basis of previous studies in vitro and in subcutaneous implantation of the nude mice, the results revealed that the nHA and CS also enhanced the bone regeneration by nHA/CS/PLGA scaffolds seeded with hUCMSCs in the calvarial defects of the nude mice at early stage.

Peri-Implant Bone Regeneration Using rhPDGF-BB, BMSCs, and β-TCP in a Canine Model

BACKGROUND

The presence of insufficient bone volume remains a major clinical problem for dental implant placement to restore oral function. Tissue engineering provides a promising approach for inducing bone regeneration and enhancing osseointegration in dental implants.

PURPOSE

The tissue-engineered bone consisting of recombinant human platelet-derived growth factor (rhPDGF-BB), bone marrow stem cells (BMSCs), and beta-tricalcium phosphate (β-TCP) particles was validated for the first time in a preclinical large animal canine model in terms of its ability to promote new bone formation around the implants, as well as osseointegration between the tissue-engineered bone and dental implants.

MATERIALS AND METHODS

Proliferation and osteogenic differentiation of canine BMSCs treated with rhPDGF-BB were evaluated with an MTT, alkaline phosphatase (ALP) activity, Alizarin Red staining, and real-time quantitative PCR (RT-qPCR) analysis of osteogenic genes. The therapeutic potential of tissue-engineered bone consisting of rhPDGF-BB/BMSCs/β-TCP in bone repair was evaluated in mesial-implant defects of immediate postextraction implants in the canine mandible.

RESULTS

rhPDGF-BB treatment significantly increased proliferation and osteogenic differentiation of canine BMSCs. Furthermore, the tissue-engineered bone consisting of rhPDGF-BB/BMSCs/β-TCP significantly enhanced bone formation and osseointegration.

CONCLUSION

This study provides important evidence that supports the potential application of rhPDGF-BB/BMSCs/β-TCP tissue-engineered bone in immediate implantation for oral function restoration.

Endoscopic lift of the maxillary sinus floor in Beagles

The aim of this study was to introduce a modified endoscopic lift of the floor of the maxillary sinus in Beagles. Twelve operations (bilateral and randomly chosen) were done in 6 Beagles each in the test group (modified endoscopic operation), and the control group, in which the operation was done with an osteotome. All operations were evaluated by two indices of safety (perforation of the sinus membrane and nasal bleeding) and 3 effective indices (the intraoperative height after lifting, volume of bone grafts, and dislocation of the sinus grafts). The sinus membrane was not perforated and there were no nasal bleeds in either group. The intraoperative height after lifting was 13.7 (0.8) mm in the test group and 9.1 (0.5) mm in the control group, so it was significantly higher in the test group than the control group (p=0.0001). Similarly, the volume of bone graft was 0.9 (0.04) ml in the test group and 0.5 (0.02) ml in the control group (p=0.0001). The volume of the anterior and posterior bone grafts in the implant cavity in the test group did not differ significantly (p=0.102), while there were significant differences in the control group (p=0.002). Endoscopic lifting of the floor of the maxillary sinus is a safe and effective approach based on direct observation in Beagles.

Systematic modification and evaluation of a canine model for elevation of the floor of the maxillary sinus

We have modified a canine model for raising the floor of the maxillary sinus by selecting a new surgical approach, and have evaluated the model with computed tomographic (CT) scans and endoscopy. Preoperative CT scans were taken of two beagle cadavers and four healthy, live beagles. The CT data were entered into Simplant software to select a candidate site for a surgical incision located between the first molar and the greater palatine foramen. All animals had the floor of the maxillary sinus raised from the candidate site. During the operation an endoscope was put outside the candidate site and into the maxillary sinus through a lateral puncture to record the condition of the Schneiderian membrane and the position of the candidate site. Postoperative CT scans were used to measure the position of the site, and the positions were compared. Eleven variables were measured on the coronal and sagittal sections. The two most important variables were the mean (SD) horizontal distance from the candidate site to the palatal alveolar ridge (8.1 (0.9)mm) and the residual bone height (2.0 (0.4)mm). There were no significant differences in the anteroposterior or internal-external position of the candidate site. Intraoperative endoscopic views showed the intact, white, and opaque membrane from the candidate site, and the movement of the membrane in the middle of the sinus floor from the lateral puncture. The candidate site is therefore an ideal surgical approach for raising the floor of the maxillary sinus, and the canine model is suitable for research in this area.

Osteotome sinus floor elevation with and without grafting: an animal study in Labrador dogs

AIM

To evaluate implant stability and histological outcomes after osteotome sinus floor elevation (OSFE) procedure, and to compare new bone formation and implant osseointegration with and without grafting.

MATERIAL AND METHODS

OSFE with simultaneous implant placement was conducted bilaterally on 6 Labrador dogs. Twenty-four implants were placed. The right side sinus (Group 1) was grafted with biphasic calcium phosphate (BCP), whereas the left side (Group 2) was left without any grafting materials. The animals were euthanized 8 and 24 weeks after surgery for histological and histomorphometric assessment. Bone-to-implant contact (BIC%), alveolar bone height (ABH), bone density (BD) and grafting material density (GMD) were measured. The implant stability (ISQ) was assessed using resonance frequency analysis (RFA) at implant placement and 1, 2, 4, 8, 12, 24 weeks after surgery.

RESULTS

Endo-sinus new bone with direct contact to implant surface were observed in two groups at both time points. ABH showed no difference between groups at both time points. BIC% and BD in Group 2 (40.05%, 35.90%) was higher than those in Group 1 (23.30%,25.59%) at 24 weeks. Significant shrinkage of grafting material was seen in Group 1. The GMD in Group 1 at 8 weeks was 24.35%, while it dropped to 19.90% at 24 weeks. The changing pattern of ISQ for both groups were similar.

CONCLUSIONS

Spontaneous new bone formation and better bone-to-implant contact were found for OSFE without grafting. The grafting material application during OSFE procedure showed no advantages in histological results.

Comparison of the use of adipose tissue-derived and bone marrow-derived stem cells for rapid bone regeneration

Stem cell-based bone tissue engineering has been recognized as a new strategy for maxillary sinus floor elevation. More rapid bone formation may enhance this technique when simultaneous dental implant placement is desired. Adipose tissue-derived stem cells (ADSCs) and bone marrow stem cells (BMSCs) are the most well-characterized cell sources for bone regeneration, but comparative studies on the osteogenic potential of these cells have yielded conflicting conclusions. This study aimed to compare the rapid bone formation capacity of ADSCs and BMSCs in a canine sinus floor augmentation model. In in vitro studies, BMSCs had a higher proliferative ability and greater osteogenic differentiation potential at both the mRNA and protein levels. When GFP-labeled cells on calcium phosphate cement (CPC) scaffolds were implanted subcutaneously into nude mice, both ADSCs and BMSCs survived for 4 wks, but only BMSCs formed new bone. Furthermore, according to sequential fluorescence labeling results for the canine sinus, BMSCs promoted rapid and greater bone regeneration during the entire observation period. In contrast, obvious mineralization was detected starting from 3 wks after implantation in the ADSC group. These results suggest that BMSCs might be more useful than ADSCs for rapid bone regeneration for sinus augmentation with simultaneous implant placement.

A comparative study of dog models for osteotome sinus floor elevation and dental implants in posterior maxilla subjacent to the maxillary sinus

OBJECTIVE

The objective of this study was to investigate the suitability of beagles and Labrador retrievers as animal models for osteotome sinus floor elevation (OSFE) and dental implants in posterior maxilla subjacent to sinus.

STUDY DESIGN

Ten beagles and 8 Labrador retrievers were included. Their posterior maxillas subjacent to the sinus were studied by a gross survey, CT scan, and histologic analysis.

RESULTS

In the posterior maxilla subjacent to sinus, the bone height was significantly higher for Labrador retrievers than for beagles (P < .05). There was no significant difference in sinus size from the coronal section and its location from the sagittal section (P > .05) between Labrador retrievers and beagles.

CONCLUSIONS

As an animal model, the Labrador is more suitable for OSFE and dental implants in posterior maxilla subjacent to sinus. The midpoint of the maxillary fourth premolar is an ideal site for implantation.

The healing of critical-size calvarial bone defects in rat with rhPDGF-BB, BMSCs, and β-TCP scaffolds

Platelet-derived growth factor-BB (PDGF-BB) plays important roles in regenerating damaged tissue. In this study we investigated the effects of a tissue-engineered bone combined with recombinant human PDGF-BB (rhPDGF-BB), bone marrow stem cells (BMSCs) and β-tricalcium phosphate (β-TCP) to repair critical-size calvarial bone defects in rat. Proliferation and osteogenic differentiation of BMSCs treated with different concentration rhPDGF-BB (0, 10, and 50 ng/ml) was evaluated by MTT, alkaline phosphatase (ALP) activity, alizarin red staining and real-time quantitative PCR (RT-qPCR) analysis of osteogenic gene. BMSCs were then combined with rhPDGF-BB-loaded β-TCP and transplanted into 5 mm calvarial bone defects. The new bone formation and mineralization was evaluated by micro-computerized tomography (Micro-CT) and histological analysis at week 8 after operation. It was observed that the proliferation of BMSCs treated with rhPDGF-BB was enhanced with a time- and dose- dependent manner. There were increased ALP activity, mineralized deposition and elevated mRNA levels of osteogenic gene for BMSCs treated with rhPDGF-BB, particularly in the 50 ng/ml group. Histological analysis showed new bone formation and mineralization in the rhPDGF-BB/BMSCs/β-TCP group was significantly higher than BMSCs/β-TCP, rhPDGF-BB/β-TCP, and β-TCP alone group (P < 0.05). In conclusion, rhPDGF-BB/BMSCs/β-TCP is a promising tissue-engineered bone for craniofacial bone regeneration.

Bone regeneration by stem cell and tissue engineering in oral and maxillofacial region

Clinical imperatives for the reconstruction of jaw bone defects or resorbed alveolar ridge require new therapies or procedures instead of autologous/allogeneic bone grafts. Regenerative medicine, based on stem cell science and tissue engineering technology, is considered as an ideal alternative strategy for bone regeneration. In this paper, we review the current choices of cell source and strategies on directing the osteogenic differentiation of stem cells. The preclinical animal models for bone regeneration and the key translational points to clinical success in oral and maxillofacial region are also discussed. We propose comprehensive strategies based on stem cell and tissue engineering researches, allowing for clinical application in oral and maxillofacial region.

Maxillary sinus floor elevation using a tissue-engineered bone with calcium-magnesium phosphate cement and bone marrow stromal cells in rabbits

The objective of this study was to assess the effects of maxillary sinus floor elevation with a tissue-engineered bone constructed with bone marrow stromal cells (bMSCs) and calcium-magnesium phosphate cement (CMPC) material. The calcium (Ca), magnesium (Mg), and phosphorus (P) ions released from calcium phosphate cement (CPC), magnesium phosphate cement (MPC), and CMPC were detected by inductively coupled plasma atomic emission spectroscopy (ICP-AES), and the proliferation and osteogenic differentiation of bMSCs seeded on CPC, MPC, and CMPC or cultured in CPC, MPC, and CMPC extracts were measured by MTT analysis, alkaline phosphatase (ALP) activity assay, alizarin red mineralization assay, and real-time PCR analysis of the osteogenic genes ALP and osteocalcin (OCN). Finally, bMSCs were combined with CPC, MPC, and CMPC and used for maxillary sinus floor elevation in rabbits, while CPC, MPC, or CMPC without cells served as control groups. The new bone formation in each group was detected by histological finding and fluorochrome labeling at weeks 2 and 8 after surgical operation. It was observed that the Ca ion concentrations of the CMPC and CPC scaffolds was significantly higher than that of the MPC scaffold, while the Mg ions concentration of CMPC and MPC was significantly higher than that of CPC. The bMSCs seeded on CMPC and MPC or cultured in their extracts proliferated more quickly than the cells seeded on CPC or cultured in its extract, respectively. The osteogenic differentiation of bMSCs seeded on CMPC and CPC or cultured in the corresponding extracts was significantly enhanced compared to that of bMSCs seeded on MPC or cultured in its extract; however, there was no significant difference between CMPC and CPC. As for maxillary sinus floor elevation in vivo, CMPC could promote more new bone formation and mineralization compared to CPC and MPC, while the addition of bMSCs could further enhance its new bone formation ability significantly. Our data suggest that CMPC possesses moderate biodegradability and excellent osteoconductivity, which may be attributed to its Ca and Mg ion composition, and the tissue-engineered bone constructed of CMPC and bMSCs might be a potential alterative graft for maxillofacial bone regeneration.

The use of injectable sonication-induced silk hydrogel for VEGF(165) and BMP-2 delivery for elevation of the maxillary sinus floor

Sonication-induced silk hydrogels were previously prepared as an injectable bone replacement biomaterial, with a need to improve osteogenic features. Vascular endothelial growth factor (VEGF(165)) and bone morphogenic protein-2 (BMP-2) are key regulators of angiogenesis and osteogenesis, respectively, during bone regeneration. Therefore, the present study aimed at evaluating in situ forming silk hydrogels as a vehicle to encapsulate dual factors for rabbit maxillary sinus floor augmentation. Sonication-induced silk hydrogels were prepared in vitro and the slow release of VEGF(165) and BMP-2 from these silk gels was evaluated by ELISA. For in vivo studies for each time point (4 and 12 weeks), 24 sinus floors elevation surgeries were made bilaterally in 12 rabbits for the following four treatment groups: silk gel (group Silk gel), silk gel/VEGF(165) (group VEGF), silk gel/BMP-2 (group BMP-2), silk gel/VEGF(165)/BMP-2 (group V + B) (n = 6 per group). Sequential florescent labeling and radiographic observations were used to record new bone formation and mineralization, along with histological and histomorphometric analysis. At week 4, VEGF(165) promoted more tissue infiltration into the gel and accelerated the degradation of the gel material. At this time point, the bone area in group V + B was significantly larger than those in the other three groups. At week 12, elevated sinus floor heights of groups BMP-2 and V + B were larger than those of the Silk gel and VEGF groups, and the V + B group had the largest new bone area among all groups. In addition, a larger blood vessel area formed in the remaining gel areas in groups VEGF and V + B. In conclusion, VEGF(165) and BMP-2 released from injectable and biodegradable silk gels promoted angiogenesis and new bone formation, with the two factors demonstrating an additive effect on bone regeneration. These results indicate that silk hydrogels can be used as an injectable vehicle to deliver multiple growth factors in a minimally invasive approach to regenerate irregular bony cavities.

Maxillary sinus floor elevation using BMP-2 and Nell-1 gene-modified bone marrow stromal cells and TCP in rabbits

This study evaluated the synergistic osteogenic effect of bone morphogenetic protein-2 (BMP-2) and Nel-like molecule-1 (Nell-1) genes in a rabbit maxillary sinus floor elevation model. Bone marrow stromal cells (bMSCs) were cultured and transduced with AdEGFP, AdNell-1, AdBMP-2, or AdNell-1 + AdBMP-2 overexpression virus. These gene-modified autologous bMSCs were then combined with a β-tricalcium phosphate (β-TCP) granule scaffold and used to elevate the maxillary sinus floor in rabbits. bMSCs cotransduced with AdNell-1 + AdBMP-2 demonstrated a synergistic effect on osteogenic differentiation as detected by real-time PCR analysis on markers of runt-related transcription factor-2, osteocalcin, collagen type 1, alkaline phosphatase activity, and calcium deposits in vitro. As for maxillary sinus floor elevation in a rabbit model in vivo, AdNell-1 + AdBMP-2 gene-transduced autologeous bMSCs/β-TCP complex had the largest bone area and most mature bone structure among the groups, as detected by HE staining and immunohistochemistry at weeks 2 and 8 after implantation. Our data suggested that the BMP-2 and Nell-1 genes possessed a synergistic effect on osteogenic differentiation of bMSCs, while bMSCs modified with the BMP-2 and Nell-1 genes could promote new bone formation and maturation in the rabbit maxillary sinus model.

Maxillary sinus floor elevation using a tissue-engineered bone with rhBMP-2-loaded porous calcium phosphate cement scaffold and bone marrow stromal cells in rabbits

The aim of this study was to evaluate the effects of maxillary sinus floor elevation by a tissue-engineered bone complex with recombinant human bone morphogenetic protein-2 (rhBMP-2)-loaded porous calcium phosphate cement (CPC) scaffold and bone marrow stromal cells (bMSCs) in rabbits. bMSCs were cultured and osteogenically induced. The osteoblastic differentiation of expanded bMSCs was detected by alkaline phosphatase activity, and calcium deposits in vitro. Thirty-six rabbits were randomly allocated into week 2, 4 and 8 observation groups. At each time point, 24 maxillary sinus floor elevation surgeries in 12 rabbits were performed bilaterally and randomly implanted by (1) CPC materials alone (group A, n = 6), (2) rhBMP-2/CPC composite materials alone (group B, n = 6), (3) CPC/bMSCs complex (group C, n = 6) and (4) rhBMP-2/CPC/bMSCs complex (group D, n = 6). As for maxillary sinus floor elevation, rhBMP-2-loaded CPC could promote new bone formation as compared to CPC, while addition of bMSCs could further enhance its new bone formation and maturity significantly, as detected by histological findings, and fluorochrome labeling. Our data suggested that rhBMP-2/CPC possessed excellent osteoinductive ability, while combining with bMSCs could further promote new bone formation and maturation in maxillary sinus elevation.

Long-term outcome of cryopreserved bone-derived osteoblasts for bone regeneration in vivo

Cryopreserved bone-derived osteoblasts (CBOs) have been considered as a promising cell source for bone regeneration. Previous studies have demonstrated that CBOs had good proliferation and osteogenicity. However, the long-term outcome of CBOs in vivo still remains unknown. In this experiment, we applied CBOs combined with calcium phosphate cement (CPC) to augment maxillary sinus in canine, computer tomography, polychrome labeling, biomechanical tests, fluorescent immunohistochemistry staining and histological analysis were used to analyze the property and mineralization process of the tissue-engineered bone preclinical application. Our results showed that CBOs combined with CPC could promote bone regeneration, dramatically maintain the height, volume and biomechanical property of augmented maxillary sinus. Furthermore, the tissue-engineered bone was more mature than scaffold alone or autogenous bone, and bone formation and remodeling were still apparent 20 months postoperatively. Additionally, 4 months after surgery might be the suitable time point for implants placement in the regenerated bone. These results also indicate that cryopreserved bone may be a potential source of osteoblasts for maxillary sinus augmentation.

Maintenance of phenotype and function of cryopreserved bone-derived cells

The emerging fields of tissue engineering and regenerative medicine require large numbers of cells for therapy. Although the properties of cells obtained from a variety of fresh tissues have been delineated, the knowledge regarding cryopreserved grafts-derived cells remains elusive. Previous studies have shown that living cells could be isolated from cryopreserved bone grafts. However, whether cryopreserved bone-derived cells can be applied in regenerative medicine is largely unknown. The present study was to evaluate the potential application of cryopreserved grafts-derived cells for tissue regeneration. We showed that cells derived from cryopreserved bone grafts could maintain good proliferation activity and osteogenic phenotype. The biological phenotype of these cells could be well preserved. The transplantation of cryopreserved bone-derived cells on scaffold could promote new bone formation in nude mice and enhance the osteointegration for dental implants in canine, which confirmed their osteogenic capacity, and showed that cells derived from cryopreserved bone were comparable to that of fresh bone in terms of the ability to promote osteogenesis in vivo. This work demonstrates that cryopreserved bone grafts may represent a novel, accessible source of cells for tissue regeneration therapy, and the results of our study may also stimulate the development of other cryopreservation techniques in basic and clinical studies.

MSCA-1/TNAP selection of human jaw periosteal cells improves their mineralization capacity

Human jaw periosteum-derived cells (JPCs) represent an alternative cell source to bone marrow-derived mesenchymal stem cells for tissue engineering applications in the oral and maxillofacial surgery. In this study we investigated how far the presence or expression of human mesenchymal stem cell antigen-1/tissue non-specific alkaline phosphatase (MSCA-1/TNAP) and LNGFR (CD271) can be utilized to select and enrich the osteogenic progenitor cell fraction from the entire JPC population. Depending on their mineralization capacity, we classified the human isolated JPCs into mineralizing (mJPCs) and non-mineralizing JPCs (nmJPCs). Flow cytometric analyses revealed that undifferentiated mJPCs expressed MSCA-1/TNAP at significant higher levels than nmJPCs at day 5 and 10 of osteogenesis. Western blot analyses showed increased MSCA-1/TNAP expression levels in mJPCs during osteogenesis, whereas in nmJPCs MSCA-1/TNAP expression remained undetectable. Using the MSCA-1 and LNGFR specific antibodies, we separated the positive and negative fractions from the entire mJPC population. In order to analyse the mineralization capacity of the MSCA-1(+) and LNGFR(+) cell subsets, we quantified the calcium deposition in both subpopulations in comparison to the respective negative subpopulations. The MSCA-1(+)/TNAP(+) cell fraction showed a significant higher osteogenic capacity compared to the MSCA-1-/TNAP- cell fraction whereas the LNGFR(+/-) cell fractions did not differ in their osteogenic potential. Our findings suggest that MSCA-1 may represent a promising osteogenic marker for mJPC.