Structural changes in collagen fibrils across a mineralized interface revealed by cryo-TEM

Understanding the hierarchical structure of collagen fibers of the human periodontal ligament: Implications for biomechanical characteristics

The periodontal ligament (PDL) is a unique fibrous connective tissue that regulates periodontal homeostasis mechanisms. Its biomechanical properties primarily reside in the hierarchical and non-uniform collagenous network. This study aimed to investigate the region-specific structure and composition of collagen fibers in the PDL at various scales and to explore their relationship with mechanical properties in a split-mouth design. Fresh human cadaver transverse PDL specimens of maxillary anterior teeth were categorized into cervical, middle, and apical groups. These specimens were analyzed via Masson's trichrome staining, scanning electron microscopy, picrosirius red (PSR) staining, three-dimensional (3D) reconstruction, Raman spectroscopy, and uniaxial tensile test. Statistical analyses were performed to compare the structural, compositional, and tensile properties among the groups. Notably, the middle PDL samples exhibited superior tensile strength and higher fiber area fraction than the other two transverse sections. Despite a higher mineral-to-matrix ratio and a different collagen secondary structure, the apical PDL demonstrated a relatively weaker tensile strength, possibly associated with its discovered sparser collagen fiber areal fraction. The cervical region, characterized by a mediocre fiber areal fraction, displayed diminished tensile strength. The 3D reconstructed collagenous network model and PSR staining exposed the fiber interaction and the micropores. Microscale porosity and variations in collagen secondary structure, particularly in the apical region, suggest adaptive mechanisms for accommodating compressive forces and maintaining functional integrity. Variance in the tensile properties of samples in different force directions indicated the significant influence of fiber orientation and root level on tissue mechanics. STATEMENT OF SIGNIFICANCE: This study provides critical insights into the biomechanical and structural properties of the human periodontal ligament (PDL), particularly focusing on the underexplored anterior teeth. Through advanced techniques like SEM, histological staining, 3D reconstruction, Raman spectroscopy, and tensile testing, we reveal significant regional variations in PDL collagen organization, composition, and biomechanical properties. Our findings address a crucial knowledge gap concerning the material mechanics of the PDL, offering a foundational understanding for future periodontal tissue engineering and biomimetic material development. This multi-scale analysis underscores the importance of both mesoscale structural characteristics and nanoscale molecular structures in maintaining PDL mechanical integrity.

Understanding the effects of mineralization and structure on the mechanical properties of tendon-bone insertion using mesoscale computational modeling

Tendon-bone fibrocartilaginous insertion, or enthesis, is a specialized interfacial region that connects tendon and bone, effectively transferring forces while minimizing stress concentrations. Previous studies have shown that insertion features gradient mineralization and branching fiber structure, which are believed to play critical roles in its excellent function. However, the specific structure-function relationship, particularly the effects of mineralization and structure at the mesoscale fiber level on the properties and function of insertion, remains poorly understood. In this study, we develop mesoscale computational models of the distinct fiber organization at tendon-bone insertions, capturing the branching network from tendon to interface fibers and the different mineralization scales. We specifically analyze three key descriptors: the mineralization scale of interface fibers, the mean, and relative standard deviation of the local branching angles of interface fibers. Tensile test simulations on insertion models with varying mineralization scales of interface fibers and structures are performed to mimic the primary loading condition applied to the insertion. We measure and analyze five representative mechanical properties: Young's modulus, strength, toughness, resilience, and failure strain. Our results reveal that mechanical properties are significantly influenced by the three key descriptors, with tradeoffs observed between mutually exclusive properties. For instance, strength and resilience plateau beyond a certain mineralization scale, while failure strain and Young's modulus exhibit monotonic decreasing and increasing trends, respectively. Consequently, there exists an optimal mineralization scale for toughness due to these tradeoffs. By analyzing the mesoscale deformation and failure mechanisms from simulation trajectories, we identify three fracture regimes closely related to the trends in mechanical properties, supporting the observed tradeoffs. Additionally, we examine in detail the effects of the mean and relative standard deviation of local branching angles on mechanical properties and deformation mechanisms. Overall, our study enhances the fundamental understanding of the composition-structure-function relationships at the tendon-bone insertion, complementing recent experimental studies. The mechanical insights from our work have the potential to guide the future biomimetic design of fibrillar adhesives and interfaces for joining soft and hard materials.

Effects of mineralization on the hierarchical organization of collagen-a synchrotron X-ray scattering and polarized second harmonic generation study

The process of mineralization fundamentally alters collagenous tissue biomechanics. While the structure and organization of mineral particles have been widely studied, the impact of mineralization on collagen matrix structure, particularly at the molecular scale, requires further investigation. In this study, synchrotron X-ray scattering (XRD) and polarization-resolved second harmonic generation microscopy (pSHG) were used to study normally mineralizing turkey leg tendon in tissue zones representing different stages of mineralization. XRD data demonstrated statistically significant differences in collagen D-period, intermolecular spacing, fibril and molecular dispersion and relative supramolecular twists between non-mineralizing, early mineralizing and late mineralizing zones. pSHG analysis of the same tendon zones showed the degree of collagen fibril organization was significantly greater in early and late mineralizing zones compared to non-mineralizing zones. The combination of XRD and pSHG data provide new insights into hierarchical collagen-mineral interactions, notably concerning possible cleavage of intra- or interfibrillar bonds, occlusion and reorganization of collagen by mineral with time. The complementary application of XRD and fast, label-free and non-destructive pSHG optical measurements presents a pathway for future investigations into the dynamics of molecular scale changes in collagen in the presence of increasing mineral deposition.

Compositional, Structural, and Biomechanical Properties of Three Different Soft Tissue-Hard Tissue Insertions: A Comparative Review

Connective tissue attaches to bone across an insertion with spatial gradients in components, microstructure, and biomechanics. Due to regional stress concentrations between two mechanically dissimilar materials, the insertion is vulnerable to mechanical damage during joint movements and difficult to repair completely, which remains a significant clinical challenge. Despite interface stress concentrations, the native insertion physiologically functions as the effective load-transfer device between soft tissue and bone. This review summarizes tendon, ligament, and meniscus insertions cross-sectionally, which is novel in this field. Herein, the similarities and differences between the three kinds of insertions in terms of components, microstructure, and biomechanics are compared in great detail. This review begins with describing the basic components existing in the four zones (original soft tissue, uncalcified fibrocartilage, calcified fibrocartilage, and bone) of each kind of insertion, respectively. It then discusses the microstructure constructed from collagen, glycosaminoglycans (GAGs), minerals and others, which provides key support for the biomechanical properties and affects its physiological functions. Finally, the review continues by describing variations in mechanical properties at the millimeter, micrometer, and nanometer scale, which minimize stress concentrations and control stretch at the insertion. In summary, investigating the contrasts between the three has enlightening significance for future directions of repair strategies of insertion diseases and for bioinspired approaches to effective soft-hard interfaces and other tough and robust materials in medicine and engineering.

Liquid Transmission Electron Microscopy for Probing Collagen Biomineralization

Collagen biomineralization is fundamental to hard tissue assembly. While studied extensively, collagen mineralization processes are not fully understood, with the majority of theories derived from electron microscopy (EM) under static, dehydrated, or frozen conditions, unlike the liquid phase environment where mineralization occurs. Herein, novel liquid transmission EM (TEM) strategies are presented, in which collagen mineralization was explored in liquid for the first time via TEM. Custom thin-film enclosures were employed to visualize the mineralization of reconstituted collagen fibrils in a calcium phosphate and polyaspartic acid solution to promote intrafibrillar mineralization. TEM highlighted that at early time points precursor mineral particles attached to collagen and progressed to crystalline mineral platelets aligned with fibrils at later time points. This aligns with observations from other techniques and validates the liquid TEM approach. This work provides a new liquid imaging approach for exploring collagen biomineralization, advancing toward understanding disease pathogenesis and remineralization strategies for hard tissues.

Multifilament Collagen Fiber Bundles with Tendon-like Structure and Mechanical Performance

Collagen multifilament bundles comprised of thousands of monofilaments are prepared by multipin contact drawing of an entangled polymer solution consisting of collagen and poly(ethylene oxide) (PEO). The multifilament bundles are hydrated in graded concentrations of PEO and phosphate buffered saline (PBS) to promote assembly of collagen fibrils within each monofilament while preserving the structure of the multifilament bundle. Multiscale structural characterization reveals that the hydrated multifilament bundle contains properly folded collagen molecules packed in collagen fibrils containing microfibrils, staggered by exactly one-sixth of the microfibril D-band spacing to produce a periodicity of 11 nm. Sequence analysis predicts that in this structure, phenylalanine residues are close enough within and between microfibrils to become ultraviolet C (UVC) crosslinked. In agreement with this analysis, the ultimate tensile strength (UTS) and Young's modulus of the hydrated collagen multifilament bundles crosslinked by UVC radiation increase nonlinearly with total UVC energy to reach values in the range of native tendons without damage to the collagen molecules. This fabrication method recapitulates the structure of a tendon across multiple length scales and offers tunability in tensile properties using only collagen molecules and no other chemical additives in addition to PEO, which is almost entirely removed during the hydration process.

Adhesion force microscopy is sensitive to the charge distribution at the surface of single collagen fibrils

Collagen fibrils are a key component of the extracellular matrix of mammalian tissues where they serve as structural elements and as a ligand for receptor-mediated signaling. As collagen molecules assemble into fibrils, in vitro or in vivo, they acquire a modulation of their molecular and electron densities called the D-band, with a 67 nm spacing, that can be visualized by cryo-electron microscopy. The D-band is composed of a gap region missing one-fifth of the molecules in the cross-section compared to the overlap region. This leads to the gap region having a positive potential and the overlap region a negative potential with respect to an n-doped silicon probe as observed by Kelvin Probe Force Microscopy. In this study, we use the adhesion force between an n-doped silicon probe and a collagen substrate to demonstrate the sensitivity of adhesion force towards charge distribution on the surface of collagen fibrils. We also map the charge distribution at the surface of single in vivo and in vitro assembled collagen fibrils and characterize the three-dimensional location and strength of three sub D-band regions that have been observed previously by cryo-electron microscopy. Our approach provides an adhesion fingerprint unique to each fibril type we analyzed and points to local charge variations at the sub D-band level even along a single fibril. It opens the road for a detailed analysis of collagen fibrils surface modifications due to ligand binding or the accumulation of advanced glycation end products at sub D-band resolution on a fibril by fibril basis.

Collagen Remodeling along Cancer Progression Providing a Novel Opportunity for Cancer Diagnosis and Treatment

The extracellular matrix (ECM) is a significant factor in cancer progression. Collagens, as the main component of the ECM, are greatly remodeled alongside cancer development. More and more studies have confirmed that collagens changed from a barrier to providing assistance in cancer development. In this course, collagens cause remodeling alongside cancer progression, which in turn, promotes cancer development. The interaction between collagens and tumor cells is complex with biochemical and mechanical signals intervention through activating diverse signal pathways. As the mechanism gradually clears, it becomes a new target to find opportunities to diagnose and treat cancer. In this review, we investigated the process of collagen remodeling in cancer progression and discussed the interaction between collagens and cancer cells. Several typical effects associated with collagens were highlighted in the review, such as fibrillation in precancerous lesions, enhancing ECM stiffness, promoting angiogenesis, and guiding invasion. Then, the values of cancer diagnosis and prognosis were focused on. It is worth noting that several generated fragments in serum were reported to be able to be biomarkers for cancer diagnosis and prognosis, which is beneficial for clinic detection. At a glance, a variety of reported biomarkers were summarized. Many collagen-associated targets and drugs have been reported for cancer treatment in recent years. The new targets and related drugs were discussed in the review. The mass data were collected and classified by mechanism. Overall, the interaction of collagens and tumor cells is complicated, in which the mechanisms are not completely clear. A lot of collagen-associated biomarkers are excavated for cancer diagnosis. However, new therapeutic targets and related drugs are almost in clinical trials, with merely a few in clinical applications. So, more efforts are needed in collagens-associated studies and drug development for cancer research and treatment.

The stoic tooth root: how the mineral and extracellular matrix counterbalance to keep aged dentin stable

Aging is a physiological process with profound impact on the biology and function of biosystems, including the human dentition. While resilient, human teeth undergo wear and disease, affecting overall physical, psychological, and social human health. However, the underlying mechanisms of tooth aging remain largely unknown. Root dentin is integral to tooth function in that it anchors and dissipates mechanical load stresses of the tooth-bone system. Here, we assess the viscoelastic behavior, composition, and ultrastructure of young and old root dentin using nano-dynamic mechanical analysis, micro-Raman spectroscopy, small angle X-ray scattering, atomic force and transmission electron microscopies. We find that the root dentin overall stiffness increases with age. Unlike other mineralized tissues and even coronal dentin, however, the ability of root dentin to dissipate energy during deformation does not decay with age. Using a deconstruction method to dissect the contribution of mineral and organic matrix, we find that the damping factor of the organic matrix does deteriorate. Compositional and ultrastructural analyses revealed higher mineral-to-matrix ratio, altered enzymatic and non-enzymatic collagen cross-linking, increased collagen d-spacing and fibril diameter, and decreased abundance of proteoglycans and sulfation pattern of glycosaminoglycans . Therefore, even in the absence of remodeling, the extracellular matrix of root dentin shares traits of aging with other tissues. To explain this discrepancy, we propose that altered matrix-mineral interactions, possibly mediated by carbonate ions sequestered at the mineral interface and/or altered glycosaminoglycans counteract the deleterious effects of aging on the structural components of the extracellular matrix. STATEMENT OF SIGNIFICANCE: Globally, a quarter of the population will be over 65 years old by 2050. Because many will retain their dentition, it will become increasingly important to understand and manage how aging affects teeth. Dentin is integral to the protective, biomechanical, and regenerative features of teeth. Here, we demonstrate that older root dentin not only has altered mechanical properties, but shows characteristic shifts in mineralization, composition, and post-translational modifications of the matrix. This strongly suggests that there is a mechanistic link between mineral and matrix components to the biomechanical performance of aging dentin with implications for efforts to slow or even reverse the aging process.

Structural studies of elastic fibre and microfibrillar proteins

Elastic tissues owe their functional properties to the composition of their extracellular matrices, particularly the range of extracellular, multidomain extensible elastic fibre and microfibrillar proteins. These proteins include elastin, fibrillin, latent TGFβ binding proteins (LTBPs) and collagens, where their biophysical and biochemical properties not only give the matrix structural integrity, but also play a vital role in the mechanisms that underlie tissue homeostasis. Thus far structural information regarding the structure and hierarchical assembly of these molecules has been challenging and the resolution has been limited due to post-translational modification and their multidomain nature leading to flexibility, which together result in conformational and structural heterogeneity. In this review, we describe some of the matrix proteins found in elastic fibres and the new emerging techniques that can shed light on their structure and dynamic properties.

D-band strain underestimates fibril strain for twisted collagen fibrils at low strains

Collagen fibrils are the main structural component of load-bearing tissues such as tendons, ligaments, skin, the cornea of the eye, and the heart. The D-band of collagen fibrils is an axial periodic density modulation that can be easily characterized by tissue-level X-ray scattering. During mechanical testing, D-band strain is often used as a proxy for fibril strain. However, this approach ignores the coupling between strain and molecular tilt. We examine the validity of this approximation using an elastomeric collagen fibril model that includes both the D-band and a molecular tilt field. In the low strain regime, we show that the D-band strain substantially underestimates fibril strain for strongly twisted collagen fibrils - such as fibrils from skin or corneal tissue.

Modeling of bending and torsional stiffnesses of bone at sub-microscale: Effect of curved mineral lamellae

Recent transmission electron microscopy images of transverse sections of human cortical bone showed that mineral lamellae (polycrystalline sheets of apatite crystals) form arcuate multi-radius patterns around collagen fibrils. The 3-6 nm thick mineral lamellae are arranged in stacks of 3-20 layers and curve around individual fibrils, few fibrils, and higher numbers of collagen fibrils. We evaluate the effect of these stacked mineral lamellae with various radius of curvature patterns on the elastic bending and torsional responses of bone at the sub-microscale using a finite element method. We find that the curved multi-radius stack patterns increased the bending and torsional stiffnesses by 7% and 23%, respectively, compared to when the stacks of mineral lamellae only encircle individual fibrils for the idealized geometric models considered. This study provides new insights into the structure-property relations for the bone ultrastructure.

Biogenetic Acellular Dermal Matrix Maintaining Rich Interconnected Microchannels for Accelerated Tissue Amendment

Given that many people suffer from extensive skin damage, wound repair has drawn tremendous attention in research. Among the various assistant dressing materials that promote healing, a porcine acellular dermal matrix (PADM), as a skin substitute, can efficiently accelerate healing by promoting cell migration and proliferation. However, a simple, low-cost preparation process remains a challenge facing PADM development, particularly because of the inferior elasticity. To overcome these drawbacks, a CaCl₂-ethanol-H₂O solution (ternary solution) combined with an additional enzyme treatment was used to obtain a transparent, porous, and elastic PADM that retained the major extracellular matrix composition of the dermis. Our results indicated that alterations in the fiber organization and secondary structural changes in the collagen occurred after treatment. Furthermore, the in vivo wound healing and histological analyses clearly revealed an extremely expedited wound repair process following the application of the biocompatible PADM. In conclusion, this study provides new insights into the development of a transparent PADM with a porous structure and good elasticity that can be used as a skin substitute to accelerate the wound healing process. Moreover, this effective technique could potentially be used to extrapolate other decellularized materials in the future.

Non-equilibrium growth and twist of cross-linked collagen fibrils

The lysyl oxidase (LOX) enzyme that catalyses cross-link formation during the assembly of collagen fibrils in vivo is too large to diffuse within assembled fibrils, and so is incompatible with a fully equilibrium mechanism for fibril formation. We propose that enzymatic cross-links are formed at the fibril surface during the growth of collagen fibrils; as a consequence no significant reorientation of previously cross-linked collagen molecules occurs inside collagen fibrils during fibril growth in vivo. By imposing local equilibrium only at the fibril surface, we develop a coarse-grained quantitative model of in vivo fibril structure that incorporates a double-twist orientation of collagen molecules and a periodic D-band density modulation along the fibril axis. Radial growth is controlled by the concentration of available collagen molecules outside the fibril. In contrast with earlier equilibrium models of fibril structure, we find that all fibrils can exhibit a core-shell structure that is controlled only by the fibril radius. At small radii a core is developed with a linear double-twist structure as a function of radius. Within the core the double-twist structure is largely independent of the D-band. Within the shell at larger radii, the structure approaches a constant twist configuration that is strongly coupled with the D-band. We suggest a stable radius control mechanism that corneal fibrils can exploit near the edge of the linear core regime; while larger tendon fibrils use a cruder version of growth control that does not select a preferred radius.

Interfacial bonding between mineral platelets in bone and its effect on mechanical properties of bone

Bone is a composite material consisting principally of apatite mineral, collagen fibrils, non-collagenous proteins, and other organic species. Recent electron microscopy studies have shown that the mineral in bone occurs as stacks of thin polycrystalline sheets ("mineral lamellae," MLs) which surround and lie between the collagen fibrils. We focus on the effect of the interface between these mineral lamellae on the mechanical properties of bone. Previous studies on bone treated with sodium hypochlorite (NaClO) to remove all organic material showed a greatly weakened mineral framework. Here, we treated femoral cortical bone with ethylenediamine (EDA), which only removes collagen, to study the effect of its removal on bone properties. We tested the degree of completion of the treatment by Raman spectroscopy and thermogravimetric analysis. When only collagen is removed, a continuous mineral structure remains and is less weakened than by NaClO treatment. Transmission electron microscopy study of finely ground particles of the EDA treated bone shows that stacks of MLs remain joined, whereas in NaClO treated bone, only isolated crystals are present. Thus, we infer that the MLs in bone are held together in stacks by an organic glue, which is destroyed by NaClO, but which survives the EDA treatment. We show that this glue may contribute to the stiffness, strength, and energy absorption of bone. Further studies are needed to discover the chemical nature of this glue. This study provides a starting point for such investigations.

Physical, Biomechanical, and Optical Characterization of Collagen and Elastin Blend Hydrogels

Collagen and elastin proteins are major components of the extracellular matrix of many organs. The presence of collagen and elastin networks, and their associated properties, in different tissues have led scientists to study collagen and elastin composites for use in tissue engineering. In this study, we characterized physical, biochemical, and optical properties of gels composed of collagen and elastin blends. We demonstrated that the addition of varying amounts of elastin to the constructs alters collagen fibrillogenesis, D-banding pattern length, and storage modulus. However, the addition of elastin does not affect collagen fibril diameter. We also evaluated the autofluorescence properties of the different collagen and elastin blends with fluorescence lifetime imaging (FLIm). Autofluorescence emission showed a red shift with the addition of elastin to the hydrogels. The fluorescence lifetime values of the gels increased with the addition of elastin and were strongly correlated with the storage moduli measurements. These results suggest that FLIm can be used to monitor the gels' mechanical properties nondestructively. These collagen and elastin constructs, along with the FLIm capabilities, can be used to develop and study collagen and elastin composites for tissue engineering and regenerative medicine.

Top-down Fabrication of Spatially Controlled Mineral-Gradient Scaffolds for Interfacial Tissue Engineering

Materials engineering can generally be divided into "bottom-up" and "top-down" approaches, where current state-of-the-art methodologies are bottom-up, relying on the advent of atomic-scale technologies. Applying bottom-up approaches to biological tissues is challenging due to the inherent complexity of these systems. Top-down methodologies provide many advantages over bottom-up approaches for biological tissues, given that some of the complexity is already built into the system. Here, we generate interfacial scaffolds by the spatially controlled removal of mineral content from trabecular bone using a chelating solution. We controlled the degree and location of the mineral interface, producing scaffolds that support cell growth, while maintaining the hierarchical structure of these tissues. We characterized the structural and compositional gradients across the scaffold using X-ray diffraction, microcomputed tomography (μCT), and Raman microscopy, revealing the presence of mineral gradients on the scale of 20 - 40 μm. Using these data, we generated a model showing the dependence of mineral removal as function of time in the chelating solution and initial bone morphology, specifically trabecular density. These scaffolds will be useful for interfacial tissue engineering, with application in the fields of orthopedics, developmental biology, and cancer metastasis to bone.

Synergistic effects of VE-TPGS and riboflavin in crosslinking of dentine

OBJECTIVE

Effect of d-alpha-tocopheryl poly(ethyleneglycol)-1000-succinate (VE-TPGS) with riboflavin-5'-phosphate solution on crosslinking of dentine collagen was investigated to analyze collagen's structural integrity.

METHODS

VE-TPGS was added to RF-solution, at RF/VE-TPGS (w/w) ratios of 0.125/0.250 and 0.125/0.500. Demineralized dentine beams were used (10wt.% phosphoric acid), rinsed using deionized-water and analysed using ELISA (Human MMP2 ELISA; Human CTSK/Cathepsin-K for MMP2 and Cathepsin K analysis). AFM of dentine collagen-fibrils structure was done before and after dentine specimens' placement in mineralization solution and tested after 14days in artificial saliva/collagenase (AS/Co) solution. The specimens were tested after 24h in mineralization solution for surface/bulk elastic modulus. Nano-indentation was carried out for each specimen on intertubular-dentine with lateral spacing of 400nm. Reduced elastic-modulus and nano-hardness were calculated and collagen content was determined using hydroxyproline-assay. Micro-Raman were performed. TEM was carried out to study structural variations of dentine-collagen in artificial-saliva (collagenase). Data were presented as mean±standard deviation and analyzed by SPSS v.15, by analysis of variance.

RESULTS

Synergetic effect of VE-TPGS was observed with RF through higher structural integrity of dentine collagen-fibrils shown by TEM/AFM. Superior surface/bulk mechanical stability was shown by nano-indentation/mechanical testing. Improvement in collagenase degradation resistance for hydroxyproline release was observed and lower endogenous-protease release of MMP-2/Cathepsin-K. Raman-analysis analysed chemical interactions between RF and collagen confirming structural-integrity of collagen fibrils after crosslinking. After 24h mineralization, AFM showed mineral depositions in close association with dentine-collagen fibrils with RF/VE-TPGS formulations.

SIGNIFICANCE

Potential synergetic effect of RF/VE-TPGS was observed by reflection of higher structural integrity and conformational-stability of dentine-collagen fibrils.

Regulators of Collagen Fibrillogenesis during Molar Development in the Mouse

Development of mammalian teeth and surrounding tissues includes time-space changes in the extracellular matrix composition and organization. This requires complex control mechanisms to regulate its synthesis and remodeling. Fibril-associated collagens with interrupted triple helices (FACITs) and a group of small leucine-rich proteoglycans (SLRPs) are involved in the regulation of collagen fibrillogenesis. Recently, collagen type XII and collagen type XIV, members of the FACITs family, were found in the peridental mesenchyme contributing to alveolar bone formation. This study was designed to follow temporospatial expression of collagen types XIIa and XIVa in mouse first molar and adjacent tissues from embryonic day 13, when the alveolar bone becomes morphologically apparent around the molar tooth bud, until postnatal day 22, as the posteruption stage. The patterns of decorin, biglycan, and fibromodulin, all members of the SLRPs family and interacting with collagens XIIa and XIVa, were investigated simultaneously. The situation in the tooth was related to what happens in the alveolar bone, and both were compared to the periodontal ligament. The investigation provided a complex localization of the five antigens in soft tissues, the dental pulp, and periodontal ligaments; in the mineralized tissues, predentin/dentin and alveolar bone; and junction between soft and hard tissues. The results illustrated developmentally regulated and tissue-specific changes in the balance of the two FACITs and three SLRPs.

Metal-Promoted Assembly of Two Collagen Mimetic Peptides into a Biofunctional "Spiraled Horn" Scaffold

Biofunctional scaffolds for the delivery of living cells are of the utmost importance for regenerative medicine. Herein, a novel, robust "spiraled horn" scaffold was elucidated through the Co2+-promoted hierarchical assembly of two collagen mimetic peptides, NCoH and HisCol. Each "horn" displayed a periodic banding pattern with band lengths corresponding to the length of the collagen peptide triple helix. Strand exchange between the two peptide trimers resulted in failure to form this intricate morphology, lending support to a precise metal-ligand-based mechanism of assembly. Little change occurred to the observed morphology when the Co2+ concentration was varied from 0.5 to 4.0 mM, and the scaffold was found to be fully formed within two minutes of exposure to the metal ion. The horned network also displayed biological functionality by binding to a His-tagged fluorophore and associating with cells.

Large Deformation Mechanisms, Plasticity, and Failure of an Individual Collagen Fibril With Different Mineral Content

Mineralized collagen fibrils are composed of tropocollagen molecules and mineral crystals derived from hydroxyapatite to form a composite material that combines optimal properties of both constituents and exhibits incredible strength and toughness. Their complex hierarchical structure allows collagen fibrils to sustain large deformation without breaking. In this study, we report a mesoscale model of a single mineralized collagen fibril using a bottom-up approach. By conserving the three-dimensional structure and the entanglement of the molecules, we were able to construct finite-size fibril models that allowed us to explore the deformation mechanisms which govern their mechanical behavior under large deformation. We investigated the tensile behavior of a single collagen fibril with various intrafibrillar mineral content and found that a mineralized collagen fibril can present up to five different deformation mechanisms to dissipate energy. These mechanisms include molecular uncoiling, molecular stretching, mineral/collagen sliding, molecular slippage, and crystal dissociation. By multiplying its sources of energy dissipation and deformation mechanisms, a collagen fibril can reach impressive strength and toughness. Adding mineral into the collagen fibril can increase its strength up to 10 times and its toughness up to 35 times. Combining crosslinks with mineral makes the fibril stiffer but more brittle. We also found that a mineralized fibril reaches its maximum toughness to density and strength to density ratios for a mineral density of around 30%. This result, in good agreement with experimental observations, attests that bone tissue is optimized mechanically to remain lightweight but maintain strength and toughness.

Is the Collagen Primed for Mineralization in Specific Regions of the Turkey Tendon? An Investigation of the Protein-Mineral Interface Using Raman Spectroscopy

The tendons in the turkey leg have specific well-defined areas which become mineralized as the animal ages and they are a thoroughly characterized model system for studying the mineralization process of bone. In this study, nondestructive Raman spectroscopic analysis was used to explore the hypothesis that regions of the turkey tendon that are associated with mineralization exhibit distinct and observable chemical modifications of the collagen prior to the onset of mineralization. The Raman spectroscopy features associated with mineralization were identified by probing (on the micrometer scale) the transition zone between mineralized and nonmineralized regions of turkey leg tendons. These features were then measured in whole tendons and identified in regions of tendon which are destined to become rapidly mineralized around 14 weeks of age. The data show there is a site-specific difference in collagen prior to the deposition of mineral, specifically the amide III band at 1270 cm(-1) increases as the collagen becomes more ordered (increased amide III:amide I ratio) in regions that become mineralized compared to collagen destined to remain nonmineralized. If this mechanism were present in materials of different mineral fraction (and thus material properties), it could provide a target for controlling mineralization in metabolic bone disease.

The ultrastructure of bone as revealed in electron microscopy of ion-milled sections

Mineral makes up more than half the volume of bone, but its spatial and structural relationship to collagen and other proteins is still a matter of debate. Due to the nanometer-size of bone crystals this matter can be resolved only with transmission electron microscope (TEM) images. Using sections cut with an ultramicrotome, previous investigators determined most mineral lies in the 40nm wide gap zone in collagen fibrils. Using less invasive sectioning methods (ion milling and focused ion beam [FIB]) reveals that most mineral is extrafibrillar, occurring in the form of mineral lamellae, polycrystalline plates 300nm or more long, packed around collagen fibrils in stacks of four or more lamellae <1nm apart. While Ca and P also occur in the gap zone, they do not appear to be in the form of well-crystallized apatite. This new model for bone ultrastructure resolves outstanding problems presented by the previous model.