A biomimetic self-assembling peptide promotes bone regeneration in vivo: A rat cranial defect study

Effects of vitamin K2 administration on guided bone regeneration in diabetic rats

AIM

The present study aimed to investigate the histomorphometric and immunohistochemical impacts of vitamin K2 on guided bone regeneration (GBR) in calvarial critical-size defects (CSDs) in diabetic rats.

METHODS

A total of 30 rats were used in this study, comprising 12 non-diabetic (control) rats and 18 with streptozotocin-nicotinamide-induced experimental Diabetes mellitus (DM). In all rats, two calvarial CSDs were created: one defect was left empty (E), the other was treated with bovine-derived bone graft and collagen-based resorbable membrane (GM). Study groups were as follows: control rats administered saline (n = 6, C-E and C-GM groups) or vitamin K2 (n = 6, CK-E and CK-GM groups) and diabetic rats administered saline (n = 6, DM-E and DM-GM groups) or vitamin K2 (n = 6, DMK-E and DMK-GM groups). After 4 weeks of saline or vitamin K2 administration, the rats were euthanized. Bone defect healing and new bone formation were assessed histomorphometrically, and osteocalcin and osteopontin levels were examined immunohistochemically.

RESULTS

Percentage of new bone formation was greater in CK-GM vs. CK-E and in DMK-GM vs. DMK-E [d = 3.86 (95% CI = 16.38-28.61), d = 1.86, (95% CI = 10.74-38.58), respectively, p < .05]. Bone defect healing scores were higher in CK-GM vs. CK-E and in DMK-GM vs. DMK-E [d = 2.69 (95% CI = -2.12 to -0.87), d = 3.28 (95% CI = 0.98-1.91), respectively, p < .05]. Osteocalcin expression levels were elevated in CK-GM vs. CK-E, in DMK-GM vs. DMK-E [d = 1.19 (95% CI = 0.08-1.41), d = 1.10 (95% CI = 0.02-1.22), respectively p < .05]. Vitamin K2 enhanced osteocalcin expression levels in DMK-E vs. DM-E [d = 2.78, (95% CI = 0.56-1.53), p < .05] and in DMK-GM vs. DM-GM [d = 2.43, (95% CI = 0.65-2.10), p < .05]. Osteopontin expression was enhanced in defects treated with GM vs. E defects [C-GM vs. C-E, d = 1.56 (95% CI = 0.38-2.01); CK-GM vs. CK-E, d = 1.91 (95% CI = 0.49-1.72); DM-GM vs. DM-E, d = 2.34 (95% CI = -1.12 to -0.50); DMK-GM vs. DMK-E, d = 2.00 (95% CI = 0.58-1.91), p < .05].

CONCLUSION

The research findings suggest that administering vitamin K2 in GBR for rats with DM favorably impacts bone healing in CSDs, presenting an adjunctive strategy for bone regeneration.

A Comparison of the Enamel Remineralisation Potential of Self-Assembling Peptides

BACKGROUND

The aim of this research was to compare the efficacy of the remineralising potential of self-assembling peptides (SAPs): Curodont Repair (P11-4), P26, and leucine-rich amelogenin peptides (LRAP) with the standard 5% NaF varnish (Duraphat) on early enamel caries lesions (EECLs).

METHODS

A demineralising solution (DS) was used to create artificial EECLs in human dental enamel specimens, which were randomly allocated to treatment groups: P11-4; P26 solution; LRAP solution; 5% NaF varnish; and deionised water (DIW). Each specimen was subjected to 8 days of pH cycling. Specimens from each test group were subjected to microcomputed tomography (micro-CT) and nanomechanical testing to assess mineral density (MD), hardness (H), and elastic modulus (EM) properties of sound, demineralised, and treated enamel.

RESULTS

The mean MD percentage gain was highest in the P26 and P11-4 groups, followed by the LRAP, 5% NaF varnish, and DIW groups. There were statistically significant differences amongst groups. In the outer layer of EECLs, the EM and H were highest in P26 and P11-4 groups, followed by the LRAP and 5% NaF varnish. In the inner layer of EECLs, the EM and H were highest in P11-4 and P26 groups, indicative of enhanced penetration and remineralisation of the deeper parts of the artificial EECLs.

CONCLUSIONS

P26 and P11-4 SAPs are more effective than 5% NaF varnish in remineralising the depth of EECLs.

Remineralizing potential of the biomimetic P11-4 self-assembling peptide on noncavitated caries lesions: A retrospective cohort study evaluating semistandardized before-and-after radiographs

BACKGROUND

Self-assembling peptide (SAP) P11-4 was introduced to treat initial caries lesions by means of guiding hydroxyapatite regeneration within the lesion. The objective of this study was to assess its effectiveness in a practical clinical setting.

METHODS

Caries lesions in permanent teeth treated with monomeric and polymeric SAP P11-4 from May 2015 through October 2020 were retrospectively analyzed at lesion and child levels by means of bite-wing radiography for changes in stage and cavitation and restoration.

RESULTS

Two hundred and nineteen children aged 10 through 19 years with a total of 405 proximal lesions in posterior teeth were followed from 0.4 through 5.5 years (median, 7 months; interquartile range, 6-19 months). Regression occurred in 37% of stage RA1 (radiolucency in the outer one-half of enamel) (95% CI, 31% to 44%), 38% of stage RA2 (radiolucency in the inner one-half of enamel plus or minus the enamel-dentin junction) (95% CI, 30% to 45%), and 40% of stage RA3 (radiolucency limited to the outer one-third of dentin) (95% CI, 16% to 68%) lesions. The proportion of lesions with no cavitation was 0.96 (95% CI, 0.94 to 0.98) after 1 year and 0.91 (95% CI, 0.88 to 0.95) after 2 years.

CONCLUSIONS

Real-world clinical data indicate that SAP P11-4 can lead to recovery and a healthier tooth stage.

PRACTICAL IMPLICATIONS

SAP P11-4 is a safe treatment for initial caries lesions in permanent teeth that remineralizes in the deepest zone of the lesion and can be introduced easily into routine dental practice.

Self-Assembled Peptide Hydrogels in Regenerative Medicine

Regenerative medicine is a complex discipline that is becoming a hot research topic. Skin, bone, and nerve regeneration dominate current treatments in regenerative medicine. A new type of drug is urgently needed for their treatment due to their high vulnerability to damage and weak self-repairing ability. A self-assembled peptide hydrogel is a good scaffolding material in regenerative medicine because it is similar to the cytoplasmic matrix environment; it promotes cell adhesion, migration, proliferation, and division; and its degradation products are natural and harmless proteins. However, fewer studies have examined the specific mechanisms of self-assembled peptide hydrogels in promoting tissue regeneration. This review summarizes the applications and mechanisms of self-assembled short peptide and peptide hydrogels in skin, bone, and neural healing to improve their applications in tissue healing and regeneration.

The Self Assembling peptide P11-4 influences viability and osteogenic differentiation of stem cells of the apical papilla (SCAP)

OBJECTIVE

to analyze the effect of P₁₁-4 self-assembly peptide on cell viability and osteogenic capacity of SCAPs through mineral deposition and gene expression of osteogenic markers. .

METHODS

SCAPs were seeded in contact with P₁₁-4 (10 µg/ml, 100 µg/ml and 1 mg/ml) solution. Cell viability was evaluated using a colorimetric assay MTT (3-(4,5-Dimethylthiazol-2-yl)-2,5-Diphenyltetrazolium Bromide) in an experimental time of 24, 48 and 72 h (n=7). Mineral deposition and quantification provided by the cells was tested using the Alizarin Red staining and Cetylpyridinium Chloride (CPC), respectively, after 30 days (n=4). Gene expression of Runt-related transcription factor 2 (RUNX2), Alkaline phosphatase (ALP) and Osteocalcin (OCN) was quantified using quantitative polymerase chain reaction (RT-qPCR), at 3 and 7 days with Glyceraldehyde 3-phosphate dehydrogenase (GAPDH) as the housekeeping gene, and relative gene expression was measured using the ΔΔCq method. Data were analyzed using Kruskall-Wallis followed by multiple comparisons, and T-test for gene expression with α=0.05.

RESULTS

All tested concentrations (10 µg/ml, 100 µg/ml and 1 mg/ml) were not cytotoxic at time 24 and 48 h. After 72 h, a slight decrease in cell viability was observed for the lowest concentration (10 µg/ml). The concentration of 100 µg/ml P11-4 showed the highest mineral deposition. However, qPCR analysis of P11-4 (10 µg/ml) showed upregulation of RUNX2 and OCN at 3 days, with downregulation of ALP at 3 and 7d.

CONCLUSION

P11-4 did not affect cell viability, induced mineral deposition in SCAPs, and upregulated the expression of RUNX2 and OCN genes at 3 days, while downregulating ALP expression at 3 and 7 days.

CLINICAL SIGNIFICANCE

Based on the results obtained in this study it can be stated that self-assembling peptide P11-4 is a potential candidate to induce mineralization on dental stem cells for regenerative purposes and also for a clinical use as a capping agent without compromising the cells health.

Evaluating the efficacy of human dental pulp stem cells and scaffold combination for bone regeneration in animal models: a systematic review and meta-analysis

INTRODUCTION

Human adult dental pulp stem cells (hDPSC) and stem cells from human exfoliated deciduous teeth (SHED) hold promise in bone regeneration for their easy accessibility, high proliferation rate, self-renewal and osteogenic differentiation capacity. Various organic and inorganic scaffold materials were pre-seeded with human dental pulp stem cells in animals, with promising outcomes in new bone formation. Nevertheless, the clinical trial for bone regeneration using dental pulp stem cells is still in its infancy. Thus, the aim of this systematic review and meta-analysis is to synthesise the evidence of the efficacy of human dental pulp stem cells and the scaffold combination for bone regeneration in animal bone defect models.

METHODOLOGY

This study was registered in PROSPERO (CRD2021274976), and PRISMA guideline was followed to include the relevant full-text papers using exclusion and inclusion criteria. Data were extracted for the systematic review. Quality assessment and the risk of bias were also carried out using the CAMARADES tool. Quantitative bone regeneration data of the experimental (scaffold + hDPSC/SHED) and the control (scaffold-only) groups were also extracted for meta-analysis.

RESULTS

Forty-nine papers were included for systematic review and only 27 of them were qualified for meta-analysis. 90% of the included papers were assessed as medium to low risk. In the meta-analysis, qualified studies were grouped by the unit of bone regeneration measurement. Overall, bone regeneration was significantly higher (p < 0.0001) in experimental group (scaffold + hDPSC/SHED) compared to the control group (scaffold-only) (SMD: 1.863, 95% CI 1.121-2.605). However, the effect is almost entirely driven by the % new bone formation group (SMD: 3.929, 95% CI 2.612-5.246) while % BV/TV (SMD: 2.693, 95% CI - 0.001-5.388) shows a marginal effect. Dogs and hydroxyapatite-containing scaffolds have the highest capacity in % new bone formation in response to human DPSC/SHED. The funnel plot exhibits no apparent asymmetry representing a lack of remarkable publication bias. Sensitivity analysis also indicated that the results generated in this meta-analysis are robust and reliable.

CONCLUSION

This is the first synthesised evidence showing that human DPSCs/SHED and scaffold combination enhanced bone regeneration highly significantly compared to the cell-free scaffold irrespective of scaffold type and animal species used. So, dental pulp stem cells could be a promising tool for treating various bone diseases, and more clinical trials need to be conducted to evaluate the effectiveness of dental pulp stem cell-based therapies.

Applications of Stimuli-Responsive Hydrogels in Bone and Cartilage Regeneration

Bone and cartilage regeneration is an area of tremendous interest and need in health care. Tissue engineering is a potential strategy for repairing and regenerating bone and cartilage defects. Hydrogels are among the most attractive biomaterials in bone and cartilage tissue engineering, mainly due to their moderate biocompatibility, hydrophilicity, and 3D network structure. Stimuli-responsive hydrogels have been a hot topic in recent decades. They can respond to external or internal stimulation and are used in the controlled delivery of drugs and tissue engineering. This review summarizes current progress in the use of stimuli-responsive hydrogels in bone and cartilage regeneration. The challenges, disadvantages, and future applications of stimuli-responsive hydrogels are briefly described.

A novel peptide isolated from Catla skin collagen acts as a self-assembling scaffold promoting nucleation of calcium-deficient hydroxyapatite nanocrystals

Catla collagen hydrolysate (CH) was fractionated by chromatography and each fraction was subjected to HA nucleation, with the resultant HA-fraction composites being scored based on the structural and functional group of the HA formed. The process was repeated till a single peptide with augmented HA nucleation capacity was obtained. The peptide (4.6 kDa), exhibited high solubility, existed in polyproline-II conformation and displayed a dynamic yet stable hierarchical self-assembling property. The 3D modelling of the peptide revealed multiple calcium and phosphate binding sites and a high propensity to self-assemble. Structural analysis of the peptide-HA crystals revealed characteristic diffraction planes of HA with mineralization following the (002) plane, retention of the self-assembled hierarchy of the peptide and intense ionic interactions between carboxyl groups and calcium. The peptide-HA composite crystals were mostly of 25-40 nm dimensions and displayed 79% mineralization, 92% crystallinity, 39.25% porosity, 12GPa Young's modulus and enhanced stability in physiological pH. Cells grown on peptide-HA depicted faster proliferation rates and higher levels of osteogenic markers. It was concluded that the prerequisite for HA nucleation by a peptide included: a conserved sequence with a unique charge topology allowing calcium chelation and its ability to form a dynamic self-assembled hierarchy for crystal propagation.

Ultrashort Peptide-Based Hydrogel for the Healing of Critical Bone Defects in Rabbits

The use of hydrogels as scaffolds for three-dimensional (3D) cell growth is an active area of research in tissue engineering. Herein, we report the self-assembly of an ultrashort peptide, a tetrapeptide, Asp-Leu-IIe-IIe, the shortest peptide sequence from a highly fibrillogenic protein TDP-43, into the hydrogel. The hydrogel was mechanically strong and highly stable, with storage modulus values in MPa ranges. The hydrogel supported the proliferation and successful differentiation of bone marrow-derived mesenchymal stem cells (BMSCs) in its matrix as assessed by cell viability, calcium deposition, alkaline phosphatase (ALP) activity, and the expression of osteogenic marker gene studies. To check whether the hydrogel supports 3D growth and regeneration in in vivo conditions, a rabbit critical bone defect model was used. Micro-computed tomography (CT) and X-ray analysis demonstrated the formation of mineralized neobone in the defect areas, with significantly higher bone mineralization and relative bone densities in animals treated with the peptide hydrogel compared to nontreated and matrigel treatment groups. The ultrashort peptide-based hydrogel developed in this work holds great potential for its further development as tissue regeneration and/or engineering scaffolds.

Self-assembling peptide-laden electrospun scaffolds for guided mineralized tissue regeneration

OBJECTIVES

Electrospun scaffolds are a versatile biomaterial platform to mimic fibrillar structure of native tissues extracellular matrix, and facilitate the incorporation of biomolecules for regenerative therapies. Self-assembling peptide P11-4 has emerged as a promising strategy to induce mineralization; however, P11-4 application has been mostly addressed for early caries lesions repair on dental enamel. Here, to investigate P11-4's efficacy on bone regeneration, polymeric electrospun scaffolds were developed, and then distinct concentrations of P11-4 were physically adsorbed on the scaffolds.

METHODS

P11-4-laden and pristine (P11-4-free) electrospun scaffolds were immersed in simulated body fluid and mineral precipitation identified by SEM. Functional groups and crystalline phases were analyzed by FTIR and XRD, respectively. Cytocompatibility, mineralization, and gene expression assays were conducted using stem cells from human exfoliated deciduous teeth. To investigate P11-4-laden scaffolds potential to induce in vivo mineralization, an established rat calvaria critical-size defect model was used.

RESULTS

We successfully synthesized nanofibrous (∼ 500 nm fiber diameter) scaffolds and observed that functionalization with P11-4 did not affect the fibers' diameter. SEM images indicated mineral precipitation, while FTIR and XRD confirmed apatite-like formation and crystallization for P11-4-laden scaffolds. In addition, P11-4-laden scaffolds were cytocompatible, highly stimulated cell-mediated mineral deposition, and upregulated the expression of mineralization-related genes compared to pristine scaffolds. P11-4-laden scaffolds led to enhanced in vivo bone regeneration after 8 weeks compared to pristine PCL.

SIGNIFICANCE

Electrospun scaffolds functionalized with P11-4 are a promising strategy for inducing mineralized tissues regeneration in the craniomaxillofacial complex.

Supramolecular Peptide Nanofiber Hydrogels for Bone Tissue Engineering: From Multihierarchical Fabrications to Comprehensive Applications

Bone tissue engineering is becoming an ideal strategy to replace autologous bone grafts for surgical bone repair, but the multihierarchical complexity of natural bone is still difficult to emulate due to the lack of suitable biomaterials. Supramolecular peptide nanofiber hydrogels (SPNHs) are emerging biomaterials because of their inherent biocompatibility, satisfied biodegradability, high purity, facile functionalization, and tunable mechanical properties. This review initially focuses on the multihierarchical fabrications by SPNHs to emulate natural bony extracellular matrix. Structurally, supramolecular peptides based on distinctive building blocks can assemble into nanofiber hydrogels, which can be used as nanomorphology-mimetic scaffolds for tissue engineering. Biochemically, bioactive motifs and bioactive factors can be covalently tethered or physically absorbed to SPNHs to endow various functions depending on physiological and pharmacological requirements. Mechanically, four strategies are summarized to optimize the biophysical microenvironment of SPNHs for bone regeneration. Furthermore, comprehensive applications about SPNHs for bone tissue engineering are reviewed. The biomaterials can be directly used in the form of injectable hydrogels or composite nanoscaffolds, or they can be used to construct engineered bone grafts by bioprinting or bioreactors. Finally, continuing challenges and outlook are discussed.

Chirality-induced bionic scaffolds in bone defects repair-a review

Due to lack of amino sugar with aging, people will suffer from various epidemic bone diseases called "undead cancer" by the World Health Organization. The key problem in bone tissue engineering that has not been completely resolved is the repair of critical large-scale bone and cartilage defects. The chirality of the extracellular matrix plays a decisive role in the physiological activity of bone cells and the occurrence of bone tissue, but the mechanism of chirality in regulating cell adhesion and growth is still in the early stage of exploration. This paper reviews the application progress of chirality-induced bionic scaffolds in bone defects repair based on "soft" and "hard" scaffolds. The aim is to summarize the effects of different chiral structures (L-shaped and D-shaped) in the process of inducing bionic scaffolds in bone defects repair. In addition, many technologies and methods as well as issues worthy of special consideration for preparing chirality-induced bionic scaffolds are also introduced. We expect that this work can provide inspiring ideas for designing new chirality-induced bionic scaffolds and promote the development of chirality in bone tissue engineering. This article is protected by copyright. All rights reserved.

A long-lasting guided bone regeneration membrane from sequentially functionalised photoactive atelocollagen

The fast degradation of collagen-based membranes in the biological environment remains a critical challenge, resulting in underperforming Guided Bone Regeneration (GBR) therapy leading to compromised clinical results. Photoactive atelocollagen (AC) systems functionalised with ethylenically unsaturated monomers, such as 4-vinylbenzyl chloride (4VBC), have been shown to generate mechanically competent materials for wound healing, inflammation control and drug delivery, whereby control of the molecular architecture of the AC network is key. Building on this platform, the sequential functionalisation with 4VBC and methacrylic anhydride (MA) was hypothesised to generate UV-cured AC hydrogels with reduced swelling ratio, increased proteolytic stability and barrier functionality for GBR therapy. The sequentially functionalised atelocollagen precursor (SAP) was characterised via TNBS and ninhydrin colourimetric assays, circular dichroism and UV-curing rheometry, which confirmed nearly complete consumption of collagen's primary amino groups, preserved triple helices and fast (< 180 s) gelation kinetics, respectively. Hydrogel's swelling ratio and compression modulus were adjusted depending on the aqueous environment used for UV-curing, whilst the sequential functionalisation of AC successfully generated hydrogels with superior proteolytic stability in vitro compared to both 4VBC-functionalised control and the commercial dental membrane Bio-Gide®. These in vitro results were confirmed in vivo via both subcutaneous implantation and a proof-of-concept study in a GBR calvarial model, indicating integrity of the hydrogel and barrier defect, as well as tissue formation following 1-month implantation in rats. STATEMENT OF SIGNIFICANCE: Collagen-based membranes remain a key component in Guided Bone Regeneration (GBR) therapy, but their properties, e.g. proteolytic stability and soft tissue barrier functionality, are still far from optimal. This is largely attributed to the complex molecular configuration of collagen, which makes chemical accessibility and structure-function relations challenging. Here, we fabricated a UV-cured hydrogel network of atelocollagen, whereby triple helices were sequentially functionalised with two distinct ethylenically unsaturated monomers. The effects of the sequential functionalisation and UV-curing on the macroscopic properties, degradation behaviour and GBR capability were investigated in vitro and in vivo. The results highlight the key role of the sequential functionalisation and provide important insights for the design of future, longer-lasting resorbable membranes for GBR therapy.

Efficacy and safety of P11-4 for the treatment of periodontal defects in dogs

Objectives

This study’s aim was to investigate the safety and performance of a self-assembling peptide matrix (SAPM) P₁₁-4 for the treatment of periodontal disease in a controlled pre-clinical study.

Materials and methods

Acute buccal bony dehiscence defects (LxW: 5 × 3 mm) were surgically created on the distal root of four teeth on one mandible side of 7 beagle dogs followed by another identical surgery 8 weeks later on the contralateral side. SAPM P₁₁-4 (with and without root conditioning with 24% EDTA (T1, T2)), Emdogain® (C) and a sham intervention (S) were randomly applied on the four defects at each time point. Four weeks after the second surgery and treatment, the animals were sacrificed, the mandibles measured by micro-computed tomography (µ-CT) and sections of the tissue were stained and evaluated histologically.

Results

Clinically and histologically, no safety concerns or pathological issues due to the treatments were observed in any of the study groups at any time point. All groups showed overall similar results after 4 and 12 weeks of healing regarding new cementum, functionality of newly formed periodontal ligament and recovery of height and volume of the new alveolar bone and mineral density.

Conclusion

A controlled clinical study in humans should be performed in a next step as no adverse effects or safety issues, which might affect clinical usage of the product, were observed.

Clinical relevance

The synthetic SAPM P₁₁-4 may offer an alternative to the animal-derived product Emdogain® in the future.

Supplementary Information

The online version contains supplementary material available at 10.1007/s00784-021-04297-6.

Bovine-Derived Xenografts Immobilized With Cryopreserved Stem Cells From Human Adipose and Dental Pulp Tissues Promote Bone Regeneration: A Radiographic and Histological Study

Adipose tissue-derived stem cells (ADSCs) and dental pulp stem cells (DPSCs) have become promising sources for bone tissue engineering. Our study aimed at evaluating bone regeneration potential of cryopreserved ADSCs and DPSCs combined with bovine-derived xenografts with 10% porcine collagen. In vitro studies revealed that although DPSCs had higher proliferative abilities, ADSCs exhibited greater mineral depositions and higher osteogenic-related gene expression, indicating better osteogenic differentiation potential of ADSCs. After applying cryopreserved ADSCs and DPSCs in a critical-sized calvarial defect model, both cryopreserved mesenchymal stem cells significantly improved bone volume density and new bone area at 2, 4, and 8 weeks. Furthermore, the combined treatment with ADSCs and xenografts was more efficient in enhancing bone repair processes compared to combined treatment with DPCSs at all-time points. We also evaluated the sequential early bone healing process both histologically and radiographically, confirming a high agreement between these two methods. Based on these results, we propose grafting of the tissue-engineered construct seeded with cryopreserved ADSCs as a useful strategy in accelerating bone healing processes.

Biodegradable materials for bone defect repair

Compared with non-degradable materials, biodegradable biomaterials play an increasingly important role in the repairing of severe bone defects, and have attracted extensive attention from researchers. In the treatment of bone defects, scaffolds made of biodegradable materials can provide a crawling bridge for new bone tissue in the gap and a platform for cells and growth factors to play a physiological role, which will eventually be degraded and absorbed in the body and be replaced by the new bone tissue. Traditional biodegradable materials include polymers, ceramics and metals, which have been used in bone defect repairing for many years. Although these materials have more or fewer shortcomings, they are still the cornerstone of our development of a new generation of degradable materials. With the rapid development of modern science and technology, in the twenty-first century, more and more kinds of new biodegradable materials emerge in endlessly, such as new intelligent micro-nano materials and cell-based products. At the same time, there are many new fabrication technologies of improving biodegradable materials, such as modular fabrication, 3D and 4D printing, interface reinforcement and nanotechnology. This review will introduce various kinds of biodegradable materials commonly used in bone defect repairing, especially the newly emerging materials and their fabrication technology in recent years, and look forward to the future research direction, hoping to provide researchers in the field with some inspiration and reference.

An in-vivo Intraoral Defect Model for Assessing the Use of P11-4 Self-Assembling Peptide in Periodontal Regeneration

Periodontal disease is one of the most common diseases worldwide. It has a significant impact on oral health and subsequently the individual’s quality of life. However, optimal regeneration of periodontal tissues, using current treatments, has yet to be achieved. Peptide self-assembly has provided a step-change in nanobiotechnology and regenerative medicine fields. Our aim was to investigate the effects of a self-assembling peptide (SAP; P₁₁-4) on periodontal regeneration in a preclinical model. Twenty-six bilateral maxillary critical-sized periodontal defects were created surgically in 13 rats. Defects on one side of the mouth were filled with P₁₁-4 hydrogel; the contra-lateral defect was untreated (control). Rats were sacrificed immediately post-surgery (time 0) and after 2 and 4 weeks. Retrieved maxillae were processed for histological, immunohistochemical, and histomorphometric assessments. The results of histological analysis showed greater organization of periodontal fibers in defects treated with P₁₁-4, at both time points, when compared to untreated defects. Histomorphometry showed that treated defects had both a significant increase in functional periodontal ligament length and a reduction in epithelial down growth after 4 weeks. At 2 weeks, treated defects showed a significant increase in expression of osteocalcin and osteoprotegerin as judged by immunohistochemistry. Also, a significantly higher osteoprotegerin/RANKL ratio was shown in treated defects. In conclusion, the results demonstrated enhanced regeneration of periodontal tissues when SAP P₁₁-4 was used to fill periodontal defects in rats. The findings of this study suggest that SAP P₁₁-4 is a promising novel candidate for periodontal regenerative therapy. Further investigations are required for optimization before clinical use.

Biomimetic peptide enriched nonwoven scaffolds promote calcium phosphate mineralisation

Cell-free translational strategies are needed to accelerate the repair of mineralised tissues, particularly large bone defects, using minimally invasive approaches. Regenerative bone scaffolds should ideally mimic aspects of the tissue's ECM over multiple length scales and enable surgical handling and fixation during implantation in vivo. Leveraging the knowledge gained with bioactive self-assembling peptides (SAPs) and SAP-enriched electrospun fibres, we presented a cell free approach for promoting mineralisation via apatite deposition and crystal growth, in vitro, of SAP-enriched nonwoven scaffolds. The nonwoven scaffold was made by electrospinning poly(ε-caprolactone) (PCL) in the presence of either peptide P₁₁-4 (Ac-QQRFEWEFEQQ-Am) or P₁₁-8 (Ac QQRFOWOFEQQ-Am), in light of the polymer's fibre forming capability and its hydrolytic degradability as well as the well-known apatite nucleating capability of SAPs. The 11-residue family of peptides (P₁₁-X) has the ability to self-assemble into β-sheet ordered structures at the nano-scale and to generate hydrogels at the macroscopic scale, some of which are capable of promoting biomineralisation due to their apatite-nucleating capability. Both variants of SAP-enriched nonwoven used in this study were proven to be biocompatible with murine fibroblasts and supported nucleation and growth of apatite minerals in simulated body fluid (SBF) in vitro. The fibrous nonwoven provided a structurally robust scaffold, with the capability to control SAP release behaviour. Up to 75% of P₁₁-4 and 45% of P₁₁-8 were retained in the fibres after 7 day incubation in aqueous solution at pH 7.4. The encapsulation of SAP in a nonwoven system with apatite-forming as well as localised and long-term SAP delivery capabilities is appealing as a potential means of achieving cost-effective bone repair therapy for critical size defects.

A structurally robust electrospun peptide-enriched scaffold, with controlled peptide release behaviour, supports nucleation and growth of hydroxyapatite minerals in vitro.

The Overview of Porous, Bioactive Scaffolds as Instructive Biomaterials for Tissue Regeneration and Their Clinical Translation

Porous scaffolds have been employed for decades in the biomedical field where researchers have been seeking to produce an environment which could approach one of the extracellular matrixes supporting cells in natural tissues. Such three-dimensional systems offer many degrees of freedom to modulate cell activity, ranging from the chemistry of the structure and the architectural properties such as the porosity, the pore, and interconnection size. All these features can be exploited synergistically to tailor the cell-material interactions, and further, the tissue growth within the voids of the scaffold. Herein, an overview of the materials employed to generate porous scaffolds as well as the various techniques that are used to process them is supplied. Furthermore, scaffold parameters which modulate cell behavior are identified under distinct aspects: the architecture of inert scaffolds (i.e., pore and interconnection size, porosity, mechanical properties, etc.) alone on cell functions followed by comparison with bioactive scaffolds to grasp the most relevant features driving tissue regeneration. Finally, in vivo outcomes are highlighted comparing the accordance between in vitro and in vivo results in order to tackle the future translational challenges in tissue repair and regeneration.

In situ formation of injectable hydrogels for chronic wound healing

Hydrogels have been widely used in wound healing treatment over the past decade.