Ex vivo regional gene therapy with human adipose-derived stem cells for bone repair

In vivo effects of cell seeding technique in an ex vivo regional gene therapy model for bone regeneration

When delivering cells on a scaffold to treat a bone defect, the cell seeding technique determines the number and distribution of cells within a scaffold, however the optimal technique has not been established. This study investigated if human adipose-derived stem cells (ASCs) transduced with a lentiviral vector to overexpress bone morphogenetic protein 2 (BMP-2) and loaded on a scaffold using dynamic orbital shaker could reduce the total cell dose required to heal a critical sized bone defect when compared with static seeding. Human ASCs were loaded onto a collagen/biphasic ceramic scaffold using static loading and dynamic orbital shaker techniques, compared with our labs standard loading technique, and implanted into femoral defects of nude rats. Both a low dose and standard dose of transduced cells were evaluated. Outcomes investigated included BMP-2 production, radiographic healing, micro-computerized tomography, histologic assessment, and biomechanical torsional testing. BMP-2 production was higher in the orbital shaker cohort compared with the static seeding cohort. No statistically significant differences were noted in radiographic, histomorphometric, and biomechanical outcomes between the low-dose static and dynamic seeding groups, however the standard-dose static seeding cohort had superior biomechanical properties. The standard-dose 5 million cell dose standard loading cohort had superior maximum torque and torsional stiffness on biomechanical testing. The use of orbital shaker technique was labor intensive and did not provide equivalent biomechanical results with the use of fewer cells.

Adipose-Derived Stem Cells: Angiogenetic Potential and Utility in Tissue Engineering

Adipose tissue (AT) is a large and important energy storage organ as well as an endocrine organ with a critical role in many processes. Additionally, AT is an enormous and easily accessible source of multipotent cell types used in our day for all types of tissue regeneration. The ability of adipose-derived stem cells (ADSCs) to differentiate into other types of cells, such as endothelial cells (ECs), vascular smooth muscle cells, or cardiomyocytes, is used in tissue engineering in order to promote/stimulate the process of angiogenesis. Being a key for future successful clinical applications, functional vascular networks in engineered tissue are targeted by numerous in vivo and ex vivo studies. The article reviews the angiogenic potential of ADSCs and explores their capacity in the field of tissue engineering (TE).

Biodistribution of lentiviral transduced adipose-derived stem cells for "ex-vivo" regional gene therapy for bone repair

Ex-vivo gene therapy has been shown to be an effective method for treating bone defects in pre-clinical models. As gene therapy is explored as a potential treatment option in humans, an assessment of the safety profile becomes an important next step. The purpose of this study was to evaluate the biodistribution of viral particles at the defect site and various internal organs in a rat femoral defect model after implantation of human ASCs transduced with lentivirus (LV) with two-step transcriptional activation (TSTA) of bone morphogenetic protein-2 (LV-TSTA-BMP-2). Animals were sacrificed at 4-, 14-, 56-, and 84-days post implantation. The defects were treated with either a standard dose (SD) of 5 million cells or a high dose (HD) of 15 million cells to simulate a supratherapeutic dose. Treatment groups included (1) SD LV-TSTA-BMP-2 (2) HD LV-TSTA-BMP-2, (3) SD LV-TSTA-GFP (4) HD LV-TSTA-GFP and (5) SD nontransduced cells. The viral load at the defect site and ten organs was assessed at each timepoint. Histology of all organs, ipsilateral tibia, and femur were evaluated at each timepoint. There were nearly undetectable levels of LV-TSTA-BMP-2 transduced cells at the defect site at 84-days and no pathologic changes in any organ at all timepoints. In conclusion, human ASCs transduced with a lentiviral vector were both safe and effective in treating critical size bone defects in a pre-clinical model. These results suggest that regional gene therapy using lentiviral vector to treat bone defects has the potential to be a safe and effective treatment in humans.

Delivery of Growth Factors to Enhance Bone Repair

The management of critical-sized bone defects caused by nonunion, trauma, infection, malignancy, pseudoarthrosis, and osteolysis poses complex reconstruction challenges for orthopedic surgeons. Current treatment modalities, including autograft, allograft, and distraction osteogenesis, are insufficient for the diverse range of pathology encountered in clinical practice, with significant complications associated with each. Therefore, there is significant interest in the development of delivery vehicles for growth factors to aid in bone repair in these settings. This article reviews innovative strategies for the management of critical-sized bone loss, including novel scaffolds designed for controlled release of rhBMP, bioengineered extracellular vesicles for delivery of intracellular signaling molecules, and advances in regional gene therapy for sustained signaling strategies. Improvement in the delivery of growth factors to areas of significant bone loss has the potential to revolutionize current treatment for this complex clinical challenge.

Combining Electrostimulation with Impedance Sensing to Promote and Track Osteogenesis within a Titanium Implant

(1) Background: Electrical stimulation is a promising alternative to promote bone fracture healing but with the limitation of tracking the osteogenesis progress in vivo. To overcome this issue, we present an opportunity to combine the electrical stimulation of a commercial titanium implant, which promotes osteogenesis within the fracture, with a real-time readout of the osteogenic progress by impedance sensing. This makes it possible to adjust the electrical stimulation modalities to the individual patient’s fracture healing process. (2) Methods: In detail, osteogenic differentiation of several cell types was monitored under continuous or pulsatile electrical stimulation at 0.7 V AC/20 Hz for at least seven days on a titanium implant by electric cell-substrate impedance sensing (ECIS). For control, chemical induction of osteogenic differentiation was induced. (3) Results: The most significant challenge was to discriminate impedance changes caused by proliferation events from those initiated by osteogenic differentiation. This discrimination was achieved by remodeling the impedance parameter Alpha (α), which increases over time for pulsatile electrically stimulated stem cells. Boosted α-values were accompanied by an increased formation of actin stress fibers and a reduced expression of the focal adhesion kinase in the cell periphery; morphological alterations known to occur during osteogenesis. (4) Conclusions: This work provided the basis for developing an effective fracture therapy device, which can induce osteogenesis on the one hand, and would allow us to monitor the induction process on the other hand.

Recent advances in gene therapy for bone tissue engineering

Autografting, a major treatment for bone fractures, has potential risks related to the required surgery and disease transmission. Bone morphogenetic proteins (BMPs) are the most common osteogenic factors used for bone-healing applications. However, BMP delivery can have shortcomings such as a short half-life and the high cost of manufacturing the recombinant proteins. Gene delivery methods have demonstrated promising alternative strategies for producing BMPs or other osteogenic factors using engineered cells. These approaches can also enable temporal overexpression and local production of the therapeutic genes in the target tissues. This review addresses recent progress on engineered viral, non-viral, and RNA-mediated gene delivery systems that are being used for bone repair and regeneration. Advances in clustered regularly interspaced short palindromic repeats/Cas9 genome engineering for bone tissue regeneration also is discussed.

Effects of cell seeding technique and cell density on BMP-2 production in transduced human mesenchymal stem cells

Small animal models have demonstrated the efficacy of ex vivo regional gene therapy using scaffolds loaded with BMP-2-expressing mesenchymal stem cells (MSCs). Prior to clinical translation, optimization of seeding techniques of the transduced cells will be important to minimize time and resource expenditure, while maximizing cell delivery and BMP-2 production. No prior studies have investigated cell-seeding techniques in the setting of transduced cells for gene therapy applications. Using BMP-2-expressing transduced adipose-derived MSCs and a porous ceramic scaffold, this study compared previously described static and dynamic seeding techniques with respect to cell seeding efficiency, uniformity of cell distribution, and in vitro BMP-2 production. Static and negative pressure seeding techniques demonstrated the highest seeding efficiency, while orbital shaking was associated with the greatest increases in BMP-2 production per cell. Low density cell suspensions were associated with the highest seeding efficiency and uniformity of cell distribution, and the greatest increases in BMP-2 production from 2 to 7 days after seeding. Our results highlight the potential for development of an optimized cell density and seeding technique that could greatly reduce the number of MSCs needed to produce therapeutic BMP-2 levels in clinical situations. Further studies are needed to investigate in vivo effects of cell seeding techniques on bone healing.

3D-Printing for Critical Sized Bone Defects: Current Concepts and Future Directions

The management and definitive treatment of segmental bone defects in the setting of acute trauma, fracture non-union, revision joint arthroplasty, and tumor surgery are challenging clinical problems with no consistently satisfactory solution. Orthopaedic surgeons are developing novel strategies to treat these problems, including three-dimensional (3D) printing combined with growth factors and/or cells. This article reviews the current strategies for management of segmental bone loss in orthopaedic surgery, including graft selection, bone graft substitutes, and operative techniques. Furthermore, we highlight 3D printing as a technology that may serve a major role in the management of segmental defects. The optimization of a 3D-printed scaffold design through printing technique, material selection, and scaffold geometry, as well as biologic additives to enhance bone regeneration and incorporation could change the treatment paradigm for these difficult bone repair problems.

Influence of donor age and comorbidities on transduced human adipose-derived stem cell in vitro osteogenic potential

Human adipose-derived mesenchymal stem cells (ASCs) transduced with a lentiviral vector system to express bone morphogenetic protein 2 (LV-BMP-2) have been shown to reliably heal bone defects in animal models. However, the influence of donor characteristics such as age, sex, race, and medical co-morbidities on ASC yield, growth and bone regenerative capacity, while critical to the successful clinical translation of stem cell-based therapies, are not well understood. Human ASCs isolated from the infrapatellar fat pads in 122 ASC donors were evaluated for cell growth characteristics; 44 underwent additional analyses to evaluate in vitro osteogenic potential, with and without LV-BMP-2 transduction. We found that while female donors demonstrated significantly higher cell yield and ASC growth rates, age, race, and the presence of co-morbid conditions were not associated with differences in proliferation. Donor demographics or the presence of comorbidities were not associated with differences in in vitro osteogenic potential or stem cell differentiation, except that transduced ASCs from healthy donors produced more BMP-2 at day 2. Overall, donor age, sex, race, and the presence of co-morbid conditions had a limited influence on cell yield, proliferation, self-renewal capacity, and osteogenic potential for non-transduced and transduced (LV-BMP-2) ASCs. These results suggest that ASCs are a promising resource for both autologous and allogeneic cell-based gene therapy applications.

Gene Therapy in Orthopaedics: Progress and Challenges in Pre-Clinical Development and Translation

In orthopaedics, gene-based treatment approaches are being investigated for an array of common -yet medically challenging- pathologic conditions of the skeletal connective tissues and structures (bone, cartilage, ligament, tendon, joints, intervertebral discs etc.). As the skeletal system protects the vital organs and provides weight-bearing structural support, the various tissues are principally composed of dense extracellular matrix (ECM), often with minimal cellularity and vasculature. Due to their functional roles, composition, and distribution throughout the body the skeletal tissues are prone to traumatic injury, and/or structural failure from chronic inflammation and matrix degradation. Due to a mixture of environment and endogenous factors repair processes are often slow and fail to restore the native quality of the ECM and its function. In other cases, large-scale lesions from severe trauma or tumor surgery, exceed the body’s healing and regenerative capacity. Although a wide range of exogenous gene products (proteins and RNAs) have the potential to enhance tissue repair/regeneration and inhibit degenerative disease their clinical use is hindered by the absence of practical methods for safe, effective delivery. Cumulatively, a large body of evidence demonstrates the capacity to transfer coding sequences for biologic agents to cells in the skeletal tissues to achieve prolonged delivery at functional levels to augment local repair or inhibit pathologic processes. With an eye toward clinical translation, we discuss the research progress in the primary injury and disease targets in orthopaedic gene therapy. Technical considerations important to the exploration and pre-clinical development are presented, with an emphasis on vector technologies and delivery strategies whose capacity to generate and sustain functional transgene expression in vivo is well-established.

Osteogenic Differentiation of Human Adipose-Derived Stem Cells Seeded on a Biomimetic Spongiosa-like Scaffold: Bone Morphogenetic Protein-2 Delivery by Overexpressing Fascia

Human adipose-derived stem cells (hADSCs) have the capacity for osteogenic differentiation and, in combination with suitable biomaterials and growth factors, the regeneration of bone defects. In order to differentiate hADSCs into the osteogenic lineage, bone morphogenetic proteins (BMPs) have been proven to be highly effective, especially when expressed locally by route of gene transfer, providing a constant stimulus over an extended period of time. However, the creation of genetically modified hADSCs is laborious and time-consuming, which hinders clinical translation of the approach. Instead, expedited single-surgery gene therapy strategies must be developed. Therefore, in an in vitro experiment, we evaluated a novel growth factor delivery system, comprising adenoviral BMP-2 transduced fascia tissue in terms of BMP-2 release kinetics and osteogenic effects, on hADSCs seeded on an innovative biomimetic spongiosa-like scaffold. As compared to direct BMP-2 transduction of hADSCs or addition of recombinant BMP-2, overexpressing fascia provided a more uniform, constant level of BMP-2 over 30 days. Despite considerably higher BMP-2 peak levels in the comparison groups, delivery by overexpressing fascia led to a strong osteogenic response of hADSCs. The use of BMP-2 transduced fascia in combination with hADSCs may evolve into an expedited single-surgery gene transfer approach to bone repair.

A review and update for registered clinical studies of stem cells for non-tumorous and non-hematological diseases

Objective

To provide consultative information on selecting potential indications of stem cells in the treatment of non-tumorous and non-hematopoietic system conditions, we screened the clinical trials on website: http://www.clinicaltrials.gov.

Methods

A literature search was conducted using the National Institute of Health (NIH) website (http://www.clinicaltrials.gov) from May 10th, 2012 to Oct 13th, 2020 with stem cells as an intervention in human trials for non-tumorous and non-hematological conditions. There was no restriction for language, research location, and research race.

Results and conclusion

Search terms initially found a total of 3576 articles. Firstly, 138 terminated or suspended studies were excluded and further 24 repeated studies were excluded. Secondly, 987 tumorous and hematopoietic conditions-related studies were excluded. Lastly, 1218 studies were excluded without stem cell therapy as their primary purpose. A total of 1209 research studies were entered into the analysis and reviewed. The top 4 diseases were about motor system diseases 229 (19.28%). In addition, 206 (17.34%) studies were related to central nervous system (CNS) diseases. 140 (11.78%) were autoimmune diseases or graft-versus-host disease (GVHD) after organ transplantation. 129 (10.86%) were about respiratory system diseases, among them, 44.19% projects were about new coronary pneumonia (NCP). The main cell types used in various diseases are Mesenchymal Stem Cells (MSCs), bone marrow stem cells (BM-SCs), peripheral blood stem cells (PBSCs), hematopoietic stem cells (HSCs), adipose stem cell (ASCs) and precursor cells.

Musculoskeletal tissue engineering: Regional gene therapy for bone repair

Bone loss associated with fracture nonunion, revision total joint arthroplasty (TJA), and pseudoarthrosis of the spine presents a challenging clinical scenario for the orthopaedic surgeon. Current treatment options including autograft, allograft, bone graft substitutes, and bone transport techniques are associated with significant morbidity, high costs, and prolonged treatment regimens. Unfortunately, these treatment strategies have proven insufficient to safely and consistently heal bone defects in the stringent biological environments often encountered in clinical cases of bone loss. The application of tissue engineering (TE) to musculoskeletal pathology has uncovered exciting potential treatment strategies for challenging bone loss scenarios in orthopaedic surgery. Regional gene therapy involves the local implantation of nucleic acids or genetically modified cells to direct specific protein expression, and has shown promise as a potential TE technique for the regeneration of bone. Preclinical studies in animal models have demonstrated the ability of regional gene therapy to safely and effectively heal critical sized bone defects which otherwise do not heal. The purpose of the present review is to provide a comprehensive overview of the current status of gene therapy applications for TE in challenging bone loss scenarios, with an emphasis on gene delivery methods and models, scaffold biomaterials, preclinical results, and future directions.

Continuous Electrical Stimulation Affects Initial Growth and Proliferation of Adipose-Derived Stem Cells

The aim of the study was to establish electrical stimulation parameters in order to improve cell growth and viability of human adipose-derived stem cells (hADSC) when compared to non-stimulated cells in vitro. hADSC were exposed to continuous electrical stimulation with 1.7 V AC/20 Hz. After 24, 72 h and 7 days, cell number, cellular surface coverage and cell proliferation were assessed. In addition, cell cycle analysis was carried out after 3 and 7 days. After 24 h, no significant alterations were observed for stimulated cells. At day 3, stimulated cells showed a 4.5-fold increase in cell numbers, a 2.7-fold increase in cellular surface coverage and a significantly increased proliferation. Via cell cycle analysis, a significant increase in the G2/M phase was monitored for stimulated cells. Contrastingly, after 7 days, the non-stimulated group exhibited a 11-fold increase in cell numbers and a 4-fold increase in cellular surface coverage as well as a significant increase in cell proliferation. Moreover, the stimulated cells displayed a shift to the G1 and sub-G1 phase, indicating for metabolic arrest and apoptosis initiation. In accordance, continuous electrical stimulation of hADSC led to a significantly increased cell growth and proliferation after 3 days. However, longer stimulation periods such as 7 days caused an opposite result indicating initiation of apoptosis.