Distal radius microstructure and finite element bone strain are related to site-specific mechanical loading and areal bone mineral density in premenopausal women

Elucidation of the radius and ulna fracture mechanisms in toy poodle dogs using finite element analysis

Fractures occurring in the distal radius and ulna of toy breed dogs pose distinctive challenges for veterinary practitioners, requiring specialized treatment approaches primarily based on anatomical features. Finite Element Analysis (FEA) was applied to conduct numerical experiments to determine stress distribution across the bone. This methodology offers an alternative substitute for directly investigating these phenomena in living dog experiments, which could present ethical obstacles. A three-dimensional bone model of the metacarpal, carpal, radius, ulna, and humerus was reconstructed from Computed Tomography (CT) images of the toy poodle and dachshund forelimb. The model was designed to simulate the jumping and landing conditions from a vertical distance of 40 cm to the ground within a limited timeframe. The investigation revealed considerable variations in stress distribution patterns between the radius and ulna of toy poodles and dachshunds, indicating notably elevated stress levels in toy poodles compared to dachshunds. In static and dynamic stress analysis, toy poodles exhibit peak stress levels at the distal radius and ulna. The Von Mises stresses for toy poodles reach 90.07 MPa (static) and 1,090.75 MPa (dynamic) at the radius and 1,677.97 MPa (static) and 1,047.98 MPa (dynamic) at the ulna. Conversely, dachshunds demonstrate lower stress levels for 5.39 MPa (static) and 231.79 MPa (dynamic) at the radius and 390.56 MPa (static) and 513.28 MPa (dynamic) at the ulna. The findings offer valuable insights for modified treatment approaches in managing fractures in toy breed dogs, optimizing care and outcomes.

Bone mineral density of the ultra-distal radius: are we ignoring valuable information?

The current study explored the possible utilization in dual-X-ray-absorptiometry scanning (DXA) of the ultra-distal radius (UDR). This region of interest is currently unused and mostly unstudied in this context. The study findings suggest UDR as potential useful region of interest in DXA scanning and warrant further study of the site.

PURPOSE

Bone mineral density (BMD) measurement of a non-dominant arm is not routinely performed during dual-X-ray-absorptiometry (DXA) test, and the possible utility of ultra-distal (UDR) radius BMD is not well-studied. We evaluated in women, correlations of UDR BMD with fracture prevalence, fracture risk prediction by the fracture risk assessment tool (FRAX), and osteoporosis diagnosed by traditional sites.

METHODS

Women who underwent a routine DXA (including their non-dominant forearm and including UDR BMD) in a tertiary medical center were included. Risk factors relevant to FRAX calculation were assessed via a self-administered questionnaire. Spearman correlations of UDR BMD to 10-year risks of major osteoporotic and hip fractures (assessed by FRAX) were explored. The possible added value of UDR BMD in explaining prevalent osteoporotic fractures was assessed using a multivariable regression model incorporating age and traditional osteoporosis diagnosis.

RESULTS

The study included 1245 women with a median age of 66 years (interquartile range: 59-73), of whom 298 (24%) had UDR T-score ≤  - 2.5 and 154 (12%) reported prior fractures. UDR BMD was significantly negatively correlated with FRAX risk score for hip and major osteoporotic fractures (R =  - 0.5 and R =  - 0.41, respectively; P < 0.001). UDR T-score ≤  - 2.5 was associated with higher fracture prevalence (19% vs 10%; P < 0.001) and remained significant after adjusting for traditional BMD and age (OR 1.49, 1.01-2.19; P = 0.043).

CONCLUSION

UDR BMD correlates both with prior fractures and with predicted fracture risks and might pose added value over traditional DXA sites.

Variations in Strain Distribution at Distal Radius under Different Loading Conditions

Distal radial fractures exhibit various fracture patterns. By assuming that the strain distribution at the distal radius affects the diversification of the fracture pattern, a parameter study using the finite element model of a wrist developed from computed tomography (CT) images was performed under different loading conditions. The finite element model of the wrist consisted of the radius, ulna, scaphoid, lunate, triquetrum, and major carpal ligaments. The material properties of the bone models were assigned on the basis of the Hounsfield Unit (HU) values of the CT images. An impact load was applied to the scaphoid, lunate, and triquetrum to simulate boundary conditions during fall accidents. This study considered nine different loading conditions that combine three different loading directions and three different load distribution ratios. According to the analysis results, the strain distribution at the distal radius changed with respect to the change in the loading condition. High strain concentration occurred in regions where distal radius fractures are commonly developed. The direction and distribution of the load acting on the radius were considered to be factors that may cause variations in the fracture pattern of distal radius fractures.

Current Applications and Selected Technical Details of Dual-Energy X-Ray Absorptiometry

The application of dual-energy X-ray absorptiometry (DXA) examinations in the assessment of bone mineral density (BMD) in the lumbar spine, hip, and forearm is the basic diagnostic method for recognition of osteoporosis. The constant development of DXA technique is due to the aging of societies and the increasing importance of osteoporosis as a public health problem. In order to assess the degree of bone demineralization in patients with hyperparathyroidism, forearm DXA examination is recommended. The vertebral fracture assessment (VFA) of the thoracic and lumbar spine, performed by a highly-skilled technician, is an interesting alternative to the X-ray examination. The DXA total body examination can be useful in the evaluation of fat redistribution among patients after bariatric surgery, in patients infected with HIV and receiving antiretroviral therapy, and in patients with metabolic diseases and suspected to have sarcopenia. The assessment of visceral adipose tissue (VAT) and detection of abdominal aortic calcifications may be useful in the prediction of cardiovascular events. The positive effect of anti-resorptive therapy may affect some parameters of DXA hip structure analysis (HSA). Long-term anti-resorptive therapy, especially with the use of bisphosphonates, may result in changes in the DXA image, which may herald atypical femur fractures (AFF). Reduction of the periprosthetic BMD in the DXA measurements can be used to estimate the likelihood of loosening the prosthesis and periprosthetic fractures. The present review aims to present current applications and selected technical details of DXA.

Dominant and nondominant distal radius microstructure: Predictors of asymmetry and effects of a unilateral mechanical loading intervention

Most information about distal radius microstructure is based on the non-dominant forearm, with little known about the factors that contribute to bilateral asymmetries in the general population, or what factors may influence bilateral changes over time. Here, we analyzed bilateral high resolution peripheral quantitative computed tomography (HRpQCT) data collected over a 12-month period as part of a clinical trial that prescribed a well-controlled, compressive loading task to the nondominant forearm. Baseline data from 102 women age 21–40, and longitudinal data from 66 women who completed the 12-month trial, were examined to determine factors responsible for side-to-side asymmetries in bone structure and change in structure over time. Cross-sectionally, the dominant radius had 2.4%–2.7% larger cross-sectional area, trabecular area, and bone mineral content than the nondominant radius, but no other differences were noted. Those who more strongly favored their dominant arm had significantly more, thinner, closely spaced trabecular struts in their dominant versus nondominant radius. Individuals assigned to a loading intervention had significant bilateral gains in total bone mineral density (2.0% and 1.2% in the nondominant versus dominant sides), and unilateral gains in the nondominant (loaded) cortical area (3.1%), thickness (3.0%), bone mineral density (1.7%) and inner trabecular density (1.3%). Each of these gains were significantly predicted by loading dose, a metric that included bone strain, number of cycles, and strain rate. Within individuals, change was negatively associated with age, meaning that women closer to age 40 experienced less of a gain in bone versus those closer to age 21. We believe that dominant/nondominant asymmetries in bone structure reflect differences in habitual loads during growth and past ability to adapt, while response to loading reflects current individual physiologic capacity to adapt.

•

We examined relationships between physical activity, handedness, demographics, and asymmetries in distal radius structure.

•

Trabecular and cross-sectional area were 2.4-2.7% larger in the dominant side.

•

We examined factors that predicted 12-month change after a unilateral loading intervention on the nondominant side.

•

The intervention caused unilateral (nondominant) increases in most variables, which scaled with loading dose.

•

The results also suggest that greater dietary calcium is associated with endosteal bone apposition following loading.

Determinants of estimated failure load in the distal radius after stroke: An HR-pQCT study

Bone health is often compromised after stroke and the distal radius is a common site of fragility fractures. The macro- and mircoproperties of bone tissue after stroke and their clinical correlates are understudied. The objectives of the study were to use High-Resolution peripheral Quantitative Computed Tomography (HR-pQCT) to investigate the bone properties at the distal radius, and to identify the correlates of estimated failure load for the distal radius in people with chronic stroke. This was a cross-sectional study of 64 people with stroke (age: 60.8 ± 7.7 years, stroke duration: 5.7 ± 3.9 years) and 64 age- and sex-matched controls. Bilateral bone structural, densitometric, geometric and strength parameters of the distal radius were measured using HR-pQCT. The architecture, stiffness and echo intensity of the bilateral biceps brachii muscle and brachial artery blood flow were evaluated using diagnostic ultrasound. Other outcomes included the Fugl-Meyer Motor Assessment (FMA), Motor Activity Log (MAL), and Composite Spasticity Scale (CSS). The results revealed a significant side (paretic vs non-paretic for the stroke group, non-dominant vs dominant for controls) by group (stroke vs control) interaction effect for estimated failure load, cortical area, cortical thickness, trabecular number and trabecular separation, and all volumetric density parameters. Post-hoc analysis showed percent side-to-side differences in bone outcomes were greater in the stroke group than the control group, with the exception of trabecular thickness and intracortical porosity. Among the HR-pQCT variables, percent side-to-side difference in trabecular volumetric bone mineral density contributed the most to the percent side-to-side difference in estimated failure load in the stroke group (R² change = 0.334, β = 1.106). Stroke-related impairments (FMA, MAL, CSS) were found to be significant determinants of the percent side-to-side difference in estimated failure load (R² change = 0.233, β = -0.480). This was the first study to examine bone microstructure post-stroke. We found that the paretic distal radius had compromised bone structural properties and lower estimated failure load compared to the non-paretic side. Motor impairment was a determinant of estimated bone strength at the distal radius and may be a potential intervention target for improving bone health post-stroke.

Relating Bone Strain to Local Changes in Radius Microstructure Following 12 Months of Axial Forearm Loading in Women

Work in animal models suggests that bone structure adapts to local bone strain, but this relationship has not been comprehensively studied in humans. Here, we quantified the influence of strain magnitude and gradient on bone adaptation in the forearm of premenopausal women performing compressive forearm loading (n = 11) and nonloading controls (n = 10). High resolution peripheral quantitative computed tomography (HRpQCT) scans of the distal radius acquired at baseline and 12 months of a randomized controlled experiment were used to identify local sites of bone formation and resorption. Bone strain was estimated using validated finite element (FE) models. Trabecular strain magnitude and gradient were higher near (within 200 μm) formation versus resorption (p < 0.05). Trabecular formation and resorption occurred preferentially near very high (>95th percentile) versus low (<5th percentile) strain magnitude and gradient elements, and very low strain elements were more likely to be near resorption than formation (p < 0.05). In the cortical compartment, strain gradient was higher near formation versus resorption (p < 0.05), and both formation and resorption occurred preferentially near very high versus low strain gradient elements (p < 0.05). At most, 54% of very high and low strain elements were near formation or resorption only, and similar trends were observed in the control and load groups. These findings suggest that strain, likely in combination with other physiological factors, influences adaptation under normal loads and in response to a novel loading intervention, and represents an important step toward defining exercise interventions to maximize bone strength.

Bone Adaptation in Adult Women Is Related to Loading Dose: A 12-Month Randomized Controlled Trial

Although strong evidence exists that certain activities can increase bone density and structure in people, it is unclear what specific mechanical factors govern the response. This is important because understanding the effect of mechanical signals on bone could contribute to more effective osteoporosis prevention methods and efficient clinical trial design. The degree to which strain rate and magnitude govern bone adaptation in humans has never been prospectively tested. Here, we studied the effects of a voluntary upper extremity compressive loading task in healthy adult women during a 12-month prospective period. A total of 102 women age 21 to 40 years participated in one of two experiments: (i) low (n = 21) and high (n = 24) strain magnitude; or (ii) low (n = 21) and high (n = 20) strain rate. Control (n = 16) no intervention. Strains were assigned using subject-specific finite element models. Load cycles were recorded digitally. The primary outcome was change in ultradistal radius integral bone mineral content (iBMC), assessed with QCT. Interim time points and secondary outcomes were assessed with high resolution pQCT (HRpQCT) at the distal radius. Sixty-six participants completed the intervention, and interim data were analyzed for 77 participants. Likely related to improved compliance and higher received loading dose, both the low-strain rate and high-strain rate groups had significant 12-month increases to ultradistal iBMC (change in control: -1.3 ± 2.7%, low strain rate: 2.7 ± 2.1%, high strain rate: 3.4 ± 2.2%), total iBMC, and other measures. "Loading dose" was positively related to 12-month change in ultradistal iBMC, and interim changes to total BMD, cortical thickness, and inner trabecular BMD. Participants who gained the most bone completed, on average, 128 loading bouts of (mean strain) 575 με at 1878 με/s. We conclude that signals related to strain magnitude, rate, and number of loading bouts contribute to bone adaptation in healthy adult women, but only explain a small amount of variance in bone changes. © 2020 The Authors. Journal of Bone and Mineral Research published by American Society for Bone and Mineral Research.

A new finite element based parameter to predict bone fracture

Dual Energy X-Ray Absorptiometry (DXA) is currently the most widely adopted non-invasive clinical technique to assess bone mineral density and bone mineral content in human research and represents the primary tool for the diagnosis of osteoporosis. DXA measures areal bone mineral density, BMD, which does not account for the three-dimensional structure of the vertebrae and for the distribution of bone mass. The result is that longitudinal DXA can only predict about 70% of vertebral fractures. This study proposes a complementary tool, based on Finite Element (FE) models, to improve the DXA accuracy. Bone is simulated as elastic and inhomogeneous material, with stiffness distribution derived from DXA greyscale images of density. The numerical procedure simulates a compressive load on each vertebra to evaluate the local minimum principal strain values. From these values, both the local average and the maximum strains are computed over the cross sections and along the height of the analysed bone region, to provide a parameter, named Strain Index of Bone (SIB), which could be considered as a bone fragility index. The procedure is initially validated on 33 cylindrical trabecular bone samples obtained from porcine lumbar vertebrae, experimentally tested under static compressive loading. Comparing the experimental mechanical parameters with the SIB, we could find a higher correlation of the ultimate stress, σULT, with the SIB values (R2adj = 0.63) than that observed with the conventional DXA-based clinical parameters, i.e. Bone Mineral Density, BMD (R2adj = 0.34) and Trabecular Bone Score, TBS (R2adj = -0.03). The paper finally presents a few case studies of numerical simulations carried out on human lumbar vertebrae. If our results are confirmed in prospective studies, SIB could be used-together with BMD and TBS-to improve the fracture risk assessment and support the clinical decision to assume specific drugs for metabolic bone diseases.

Exercise Early and Often: Effects of Physical Activity and Exercise on Women's Bone Health

In 2011 over 1.7 million people were hospitalized because of a fragility fracture, and direct costs associated with osteoporosis treatment exceeded 70 billion dollars in the United States. Failure to reach and maintain optimal peak bone mass during adulthood is a critical factor in determining fragility fracture risk later in life. Physical activity is a widely accessible, low cost, and highly modifiable contributor to bone health. Exercise is especially effective during adolescence, a time period when nearly 50% of peak adult bone mass is gained. Here, we review the evidence linking exercise and physical activity to bone health in women. Bone structure and quality will be discussed, especially in the context of clinical diagnosis of osteoporosis. We review the mechanisms governing bone metabolism in the context of physical activity and exercise. Questions such as, when during life is exercise most effective, and what specific types of exercises improve bone health, are addressed. Finally, we discuss some emerging areas of research on this topic, and summarize areas of need and opportunity.