The effect of different methods of cross-linking of collagen on its dielectric properties

The State of Starch/Hydroxyapatite Composite Scaffold in Bone Tissue Engineering with Consideration for Dielectric Measurement as an Alternative Characterization Technique

Hydroxyapatite (HA) has been widely used as a scaffold in tissue engineering. HA possesses high mechanical stress and exhibits particularly excellent biocompatibility owing to its similarity to natural bone. Nonetheless, this ceramic scaffold has limited applications due to its apparent brittleness. Therefore, this had presented some difficulties when shaping implants out of HA and for sustaining a high mechanical load. Fortunately, these drawbacks can be improved by combining HA with other biomaterials. Starch was heavily considered for biomedical device applications in favor of its low cost, wide availability, and biocompatibility properties that complement HA. This review provides an insight into starch/HA composites used in the fabrication of bone tissue scaffolds and numerous factors that influence the scaffold properties. Moreover, an alternative characterization of scaffolds via dielectric and free space measurement as a potential contactless and nondestructive measurement method is also highlighted.

Label-Free Characterization of Collagen Crosslinking in Bone-Engineered Materials Using Nonlinear Optical Microscopy

Engineered biomaterials provide unique functions to overcome the bottlenecks seen in biomedicine. Hence, a technique for rapid and routine tests of collagen is required, in which the test items commonly include molecular weight, crosslinking degree, purity, and sterilization induced structural change. Among them, the crosslinking degree mainly influences collagen properties. In this study, second harmonic generation (SHG) and coherent anti-Stokes Raman scattering (CARS) microscopy are used in combination to explore the collagen structure at molecular and macromolecular scales. These measured parameters are applied for the classification and quantification among the different collagen scaffolds, which were verified by other conventional methods. It is demonstrated that the crosslinking status can be analyzed from SHG images and presented as the coherency of collagen organization that is correlated with the mechanical properties. Also, the comparative analyses of SHG signal and relative CARS signal of amide III band at 1,240 cm−1 to δCH2 band at 1,450 cm−1 of these samples provide information regarding the variation of the molecular structure during a crosslinking process, thus serving as nonlinear optical signatures to indicate a successful crosslinking.

Efficacy evaluation of electric field frequency and temperature on dielectric properties of collagen cross-linked by glutaraldehyde

Solid-state dielectric properties are reported for unmodified collagen (Col) and glutaraldehyde-modified collagen (Col-GA) over the frequency range from 100Hz to 100kHz and at temperatures from 25 to 145°C. In the full temperature and frequency range the average values of the relative permittivity and dielectric loss for Col samples are higher than those recorded for Col-GA samples. The peak temperature of these both parameters associated with the release of loosely bound water is around 73 and 77°C for Col and Col-GA samples, respectively. The activation energy for the reorientation and breaking of hydrogen bonds takes the values 32kJmol^-1 for Col and 23kJmol^-1 for Col-GA. The relative permittivity decrement and conductivity increment of Col-GA samples fall by 40 and 30% on average in the temperature range 25-75°C, as compared to Col samples. Dielectric properties of Col-GA may be helpful in designing scaffolds for tissue engineering.

Comparison of various types of collagenous scaffolds applied for embryonic nerve cell culture

The purpose of the study was to confirm whether collagen-based scaffolds using different cross-linking methods are suitable elaborate environments for embryonic nerve cell culture. Three 3D sponge-shaped porous scaffolds were composed using collagen alone, collagen with chondroitin sulphate modified by 1-ethyl-3-(3-dimethyl aminopropyl) carbodiimide hydrochloride, and collagen cross-linked by 2,3-dialdehyde cellulose (DAC). Embryonic nerve cells from rats were applied to the scaffolds and stained with bisbenzimide to study cell entrapment within the scaffolds. The metabolic activity of the cells cultured in the scaffolds was determined by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. The majority of cells were differentiated into neurocytes or oligodendrocytes. Collagen and collagen-chondroitin sulphate scaffolds entrapped a low number of cells. The highest cell density was found in the collagen-DAC scaffold. Moreover, in collagen-DAC scaffolds, the metabolic activity was markedly higher than in the other samples. Although all used scaffolds are suitable for the culture of embryonic nerve cells, the collagen-DAC scaffold properties are the most favorable. This scaffold entraps the highest number of cells and constitutes a favorable environment for their culture. Hence, the Col-DAC scaffold is recommended as an effective carrier for embryonic nerve cells.

A Review: Origins of the Dielectric Properties of Proteins and Potential Development as Bio-Sensors

Polymers can be classified as synthetic polymers and natural polymers, and are often characterized by their most typical functions namely their high mechanical resistivity, electrical conductivity and dielectric properties. This bibliography report consists in: (i) Defining the origins of the dielectric properties of natural polymers by reviewing proteins. Despite their complex molecular chains, proteins present several points of interest, particularly, their charge content conferring their electrical and dielectric properties; (ii) Identifying factors influencing the dielectric properties of protein films. The effects of vapors and gases such as water vapor, oxygen, carbon dioxide, ammonia and ethanol on the dielectric properties are put forward; (iii) Finally, potential development of protein films as bio-sensors coated on electronic devices for detection of environmental changes particularly humidity or carbon dioxide content in relation with dielectric properties variations are discussed. As the study of the dielectric properties implies imposing an electric field to the material, it was necessary to evaluate the impact of frequency on the polymers and subsequently on their structure. Characterization techniques, on the one hand dielectric spectroscopy devoted for the determination of the glass transition temperature among others, and on the other hand other techniques such as infra-red spectroscopy for structure characterization as a function of moisture content for instance are also introduced.

Dielectric study of interaction of water with normal and osteoarthritis femoral condyle cartilage

The main goal of this paper is the in vitro study of healthy and osteoarthritis (OA) human cartilage using the dielectric spectroscopy in the alpha-dispersion region of the electric field and in the temperatures from 25 to 140°C. The activation energy of conductivity needed to break the bonds formed by water in the extracellular matrix takes the average values of 61kJ/mol and 44kJ/mol for the control and OA cartilages, respectively. At 28°C, the small difference appears in the permittivity decrement between the control and OA cartilages, while the conductivity increment is about 2 times higher for the control tissue than that for the OA tissue. At 75°C, the conductivity increment for both of these samples is 8 times higher than their respective permittivity decrement. In addition, at 140°C the values of these both parameters for the OA tissue decrease by 8 times as compared to those recorded for the control sample. The relaxation frequency of about 10kHz is similar for both of these samples. The knowledge on dielectric properties of healthy and OA cartilage may prove relevant to tissue engineering focused on the repair of cartilage lesions via the layered structure designing.

Hyaluronic acid/EDC/NHS-crosslinked green electrospun silk fibroin nanofibrous scaffolds for tissue engineering

The mechanical properties of SF nanofibrous matrices were enhanced through crosslinking with HA/EDC/NHS for soft tissue engineering.

Assessment of dehydrothermally cross-linked collagen membrane for guided bone regeneration around peri-implant dehiscence defects: a randomized single-blinded clinical trial

Purpose

The aim of this study was to determine the clinical feasibility of using dehydrothermally cross‐linked collagen membrane (DCM) for bone regeneration around peri-implant dehiscence defects, and compare it with non-cross-linked native collagen membrane (NCM).

Methods

Dehiscence defects were investigated in twenty-eight patients. Defect width and height were measured by periodontal probe immediately following implant placement (baseline) and 16 weeks afterward. Membrane manipulation and maintenance were clinically assessed by means of the visual analogue scale score at baseline. Changes in horizontal thickness at 1 mm, 2 mm, and 3 mm below the top of the implant platform and the average bone density were assessed by cone-beam computed tomography at 16 weeks. Degradation of membrane was histologically observed in the soft tissue around the implant prior to re-entry surgery.

Results

Five defect sites (two sites in the NCM group and three sites in the DCM group) showed soft-tissue dehiscence defects and membrane exposure during the early healing period, but there were no symptoms or signs of severe complications during the experimental postoperative period. Significant clinical and radiological improvements were found in all parameters with both types of collagen membrane. Partially resorbed membrane leaflets were only observed histologically in the DCM group.

Conclusions

These findings suggest that, compared with NCM, DCM has a similar clinical expediency and possesses more stable maintenance properties. Therefore, it could be used effectively in guided bone regeneration around dehiscence-type defects.

Electrostatic Forces Mediated by Choline Dihydrogen Phosphate Stabilize Collagen

Cross-linkers aid in improving biostability of collagen via different mechanisms. Choline dihydrogen phosphate (cDHP), a biocompatible ionic liquid, has been reported as a potential cross-linker for collagen. However, its mechanism is yet unclear. This study explores the effect of cDHP on the physicochemical stability of collagen and nature of its interaction. Dielectric behavior of collagen-cDHP composites signifies that cDHP enhances intermolecular forces. This was demonstrated by an increase in cross-linked groups and high denaturation temperature of collagen-cDHP composites. XRD measurements reveal minor conformational change in helices. Molecular modeling studies illustrate that the force existing between collagen and cDHP is electrostatic in nature. Herein, it is postulated that dihydrogen phosphate anion attaches to cationic functional groups of collagen, resulting in closer vicinity of various side chains of collagen, forming physical and chemical cross-links within collagen, contributing to its structural stability. Our study suggests that dihydrogen phosphate anions can be employed for developing a new class of biocompatible cross-linkers.

Thermal denaturation behavior of collagen fibrils in wet and dry environment

We have developed a new minimally invasive technique--integrated low-level energy adhesion technique (ILEAT)--which uses heat, pressure, and low-frequency vibrations for binding living tissues. Because the adhesion mechanism of the living tissues is not fully understood, we investigated the effect of thermal energy on the collagen structure in living tissues using ILEAT. To study the effect of thermal energy and heating time on the structure of the collagen fibril, samples were divided in two categories-wet and dry. Further, atomic force microscopy was used to analyze the collagen fibril structure before and after heating. Results showed that collagen fibrils in water denatured after 1 minute at temperatures higher than 80 °C, while partial denaturation was observed at temperatures of 80 °C and a heating time of 1 min. Furthermore, complete denaturation was achieved after 90 min, suggesting that the denaturation rate is temperature and time dependent. Moreover, the collagen fibrils in dry condition maintained their native structure even after being heated to 120 °C for 90 min in the absence of water, which specifically suppressed denaturation. However, partial denaturation of collagen fibrils could not be prevented, because this determines the adhesion between the collagen molecules, and stabilizes tissue bonding.

Stem Cells on Biomaterials for Synthetic Grafts to Promote Vascular Healing

This review is divided into two interconnected parts, namely a biological and a chemical one. The focus of the first part is on the biological background for constructing tissue-engineered vascular grafts to promote vascular healing. Various cell types, such as embryonic, mesenchymal and induced pluripotent stem cells, progenitor cells and endothelial- and smooth muscle cells will be discussed with respect to their specific markers. The in vitro and in vivo models and their potential to treat vascular diseases are also introduced. The chemical part focuses on strategies using either artificial or natural polymers for scaffold fabrication, including decellularized cardiovascular tissue. An overview will be given on scaffold fabrication including conventional methods and nanotechnologies. Special attention is given to 3D network formation via different chemical and physical cross-linking methods. In particular, electron beam treatment is introduced as a method to combine 3D network formation and surface modification. The review includes recently published scientific data and patents which have been registered within the last decade.

Yttrium Iron Garnet: Properties and Applications Review

Due to a fast progress in the development of communication systems, the dielectric and magnetic ceramics (ferrites) have become attractive to be used in devices. Although the ferrites of the spinel type were the first material to be used in the microwave range, garnets have smaller dielectric losses and, therefore, are chosen for many applications. High demands for modern electric applications in magnetic materials results in new techniques and products being permanently studied and researched, with a consequent appearance of new solutions for a wide applications series. This work presents the study of the ferrimagnetic composite, constituted by Y3Fe5O12 (YIG) and Gd3Fe5O12 (GdIG) phases, through solid state synthetic route and submitted to high-energy mechanical milling. Additionally, experiments were made in order to evaluate the electric and magnetic behavior of the composites at radio frequency and microwave range and then later suggest an adequate technological application. The composites were efficient as ferrite resonator antennas (FRAs) and microstrip antennas (thick films deposited on metalized surface alumina substrate by screen-printing technique), in the microwave frequency range. The experiments with FRAs showed satisfactory results due to the control of the antennas radiation characteristics and their tuning by the use of an external magnetic field. The composite resonators studied in this work can be important to the development of a third generation (3G) wideband antennas to cell phones and other wireless products.

Healing potential of mesenchymal stem cells cultured on a collagen-based scaffold for skin regeneration

BACKGROUND

Wound healing of burned skin remains a major goal in public health. Previous reports showed that the bone marrow stem cells were potent in keratinization and vascularization of full thickness skin wounds.

METHODS

In this study, mesenchymal stem cells were derived from rat adipose tissues and characterized by flowcytometry. Staining methods were used to evaluate their differentiation ability. A collagen-chitosan scaffold was prepared by freeze-drying method and crosslinked by carbodiimide-based crosslinker.

RESULTS

The results of immunecytochemistry and PCR experiments confirmed the adipose-derived stem cells (ASC) in differentiation to the keratinocytes under the treatment of keratinocyte growth factor. The isolated ASC were seeded on the scaffolds and implanted at the prepared wounds. The scaffolds without cells were considered as a control and implanted on the other side of the rat. Histopathological analyses confirmed the formation of new tissue on the scaffold-cell side after 14 days with the formation of dermis and epidermis.

CONCLUSION

These results indicated the capacity of ASC in differentiation to keratinocytes and also wound healing in vivo.

Stability of collagen in the presence of 3,4-dihydroxyphenylalanine (DOPA)

Many cross-linking agents for collagen are available with varying levels of toxicity and some are in use in biomedical implants of collagen. L-DOPA (3,4-dihydroxyphenylalanine), a neurotransmitter, is a naturally present compound in the living system and is the target in therapeutic strategy of Parkinson's disease. This work reports the effect of the neurotransmitter DOPA on the stability of collagen solution using circular dichroism (CD), fluorescence spectroscopy, melting and shrinkage temperature. Collagen solution treated with various concentrations of DOPA ranging from 10(-2) to 10(-5)M was analyzed using fluorescence and CD spectra. When collagen was treated with DOPA, the intensity of emission was found to increase indicating the possibility of interaction of DOPA with collagen and maximum emission intensity was observed between 10(-3) and 10(-4)M for L-DOPA and DL-DOPA, respectively. CD studies show possible aggregation of collagen even in the presence of low concentrations of DOPA. The shrinkage temperature of DOPA treated collagen fibres was experimentally determined to be 69+/-1 degrees C. The melting temperature of DOPA cross linked collagen solution also exhibited a significant increase from 35 to 40 degrees C (+/-0.1) (P<0.05). The experimental results suggest that the optimum concentration for cross linking collagen with DOPA ranges between 10(-3) and 10(-4)M. Thus, DOPA may be a useful stabilizing agent for collagen for biomedical applications.

The treatment of collagen fibrils by tissue transglutaminase to promote vascular smooth muscle cell contractile signaling

The enzyme tissue transglutaminase 2 (TG2) appears to play an important role in several physiological processes such as wound healing, the progression of cancer and of vascular disease. Additionally, TG2 has been proposed as a means of stabilizing collagen extracellular matrix (ECM) scaffolds for tissue engineering applications. In this report, we examined the effect of TG2 treatment on the mechanical properties of the ECM, and associated cell responses. Using a model ECM of fibrillar collagen, we quantitatively examined vascular smooth muscle cell (vSMC) response to untreated, or TG2 treated collagen. We show that cells respond to TG2 treated collagen with increased spreading, an increase in contractile response as indicated by elevated F-actin polymerization and myosin light chain phosphorylation, and increased proliferation, without apparent changes in integrin specificity or matrix topography. Comparative atomic force microscopy loading studies indicate that TG2 treated fibrils are 3 times more resistant to shearing force from an AFM tip than untreated fibrils. The data suggest that TG2 treatment of collagen increases matrix mechanical stiffness, which apparently alters the contractile and proliferative response of vSMC.