The ionic strength effect on the DNA complexation by DOPC — gemini surfactants liposomes

Polymyxin B-Enriched Exogenous Lung Surfactant: Thermodynamics and Structure

The use of an exogenous pulmonary surfactant (EPS) to deliver other relevant drugs to the lungs is a promising strategy for combined therapy. We evaluated the interaction of polymyxin B (PxB) with a clinically used EPS, the poractant alfa Curosurf (PSUR). The effect of PxB on the protein-free model system (MS) composed of four phospholipids (diC16:0PC/16:0-18:1PC/16:0-18:2PC/16:0-18:1PG) was examined in parallel to distinguish the specificity of the composition of PSUR. We used several experimental techniques (differential scanning calorimetry, small- and wide-angle X-ray scattering, small-angle neutron scattering, fluorescence spectroscopy, and electrophoretic light scattering) to characterize the binding of PxB to both EPS. Electrostatic interactions PxB-EPS are dominant. The results obtained support the concept of cationic PxB molecules lying on the surface of the PSUR bilayer, strengthening the multilamellar structure of PSUR as derived from SAXS and SANS. A protein-free MS mimics a natural EPS well but was found to be less resistant to penetration of PxB into the lipid bilayer. PxB does not affect the gel-to-fluid phase transition temperature, Tm, of PSUR, while Tm increased by ∼+ 2 °C in MS. The decrease of the thickness of the lipid bilayer (dL) of PSUR upon PxB binding is negligible. The hydrophobic tail of the PxB molecule does not penetrate the bilayer as derived from SANS data analysis and changes in lateral pressure monitored by excimer fluorescence at two depths of the hydrophobic region of the bilayer. Changes in dL of protein-free MS show a biphasic dependence on the adsorbed amount of PxB with a minimum close to the point of electroneutrality of the mixture. Our results do not discourage the concept of a combined treatment with PxB-enriched Curosurf. However, the amount of PxB must be carefully assessed (less than 5 wt % relative to the mass of the surfactant) to avoid inversion of the surface charge of the membrane.

Studies on the interactions of tiny amounts of common ionic surfactants with unsaturated phosphocholine lipid model membranes

In order to provide the fundamental information about the interactions of common anionic surfactants with the basic unsaturated phospholipids the influence of three cationic (dodecyltrimethylammonium bromide, DTAB; tetradecyltrimethylammonium bromide, TTAB and hexadecyltrimethylamonium bromide, CTAB) and one anionic (sodium dodecylsulfate, SDS) surfactants on the properties of the 1-palmitoyl-2-oleoyl-glycero-3-phosphocholine (POPC) and 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) layers was investigated. The studies proved that a tiny amount of the ionic surfactant added to the already synthesized liposome suspension is sufficient to change the zeta potential of the POPC and DOPC liposomes significantly. This impact increases with the surfactant concentration, the alkyl chain length of the surfactant and the degree of lipid saturation. Moreover, this effect is greater for the anionic surfactant than for the cationic one of the same alkyl chain length. The observed findings were confirmed in the course of the research carried out with the use of the corresponding Langmuir monolayers where the surface pressure - mean area isotherms, the compressibility modulus - surface pressure dependences, the monolayer penetration tests, the surface potential - mean molecular area isotherms and Brewster angle microscopy were discussed. It was found that the presence of the surfactants shifts the isotherms towards larger molecular area, to the higher extent for the SDS than DTAB. This effect increases with the increasing surfactant concentration in the subphase. Moreover, the investigated surfactants remain in the monolayer even at high surface pressure. Nevertheless, no effect on the morphology of the POPC and DOPC monolayers was detected from the BAM images. The surface potential and surface charge of the liposomes calculated on the basis of the zeta potential results reflected the interactions between the surfactant and the lipid layers.

Calcium mediated DNA binding in non-lamellar structures formed by DOPG/glycerol monooleate

In order to test an encapsulation method of short fragmented DNA (∼ 20-300 bp), we study the solubilisation in 150 mM solution of NaCl of a cubic phase formed by glycerol monooleate (GMO) with negatively charged dioleoylphosphatidylglycerol (DOPG) up to the level of unilamellar vesicles and, subsequently, the restoration of the cubic phase using Ca²⁺ cations. We performed small angle X-ray and neutron scattering (SAXS and SANS) to follow structural changes in DOPG/GMO mixtures induced by increasing DOPG content. The cubic phase (Pn3m space group) is preserved up to ∼ 11 mol% of DOPG in DOPG/GMO. Above 20 mol%, the SANS curves are typical of unilamellar vesicles. The thickness of the DOPG/GMO lipid bilayer (d_L) decreases slightly with increasing fraction of DOPG. The addition of 15 mM of CaCl₂ solution shields the electrostatic repulsions of DOPG molecules, increases slightly d_L and restores the cubic structures in the mixtures up to ∼ 37 mol% of DOPG. Zeta potential shows negative surface charge. The analysis of the data provides the radius of the water nano-channels of the formed non-lamellar structures. We discuss their dimensions with respect to DNA binding. In addition, Ca²⁺ mediates DNA - DOPG/GMO binding. The formed hexagonal phase, H_II, binds less of DNA in comparison with cubic phases (∼ 6 wt% and ∼ 20 wt% of the total amount, respectively). The studied system can be utilized as anionic Q_II delivery vector for genetic material.

Non-viral transfection vectors: are hybrid materials the way forward?

Transfection is a process by which oligonucleotides (DNA or RNA) are delivered into living cells. This allows the synthesis of target proteins as well as their inhibition (gene silencing). However, oligonucleotides cannot cross the plasma membrane by themselves; therefore, efficient carriers are needed for successful gene delivery. Recombinant viruses are among the earliest described vectors. Unfortunately, they have severe drawbacks such as toxicity and immunogenicity. In this regard, the development of non-viral transfection vectors has attracted increasing interests, and has become an important field of research. In the first part of this review we start with a tutorial introduction into the biological backgrounds of gene transfection followed by the classical non-viral vectors (cationic organic carriers and inorganic nanoparticles). In the second part we highlight selected recent reports, which demonstrate that hybrid vectors that combine key features of classical carriers are a remarkable strategy to address the current challenges in gene delivery.

The Impact of Alkyl-Chain Purity on Lipid-Based Nucleic Acid Delivery Systems - Is the Utilization of Lipid Components with Technical Grade Justified?

The physicochemical properties and transfection efficacies of two samples of a cationic lipid have been investigated and compared in 2D (monolayers at the air/liquid interface) and 3D (aqueous bulk dispersions) model systems using different techniques. The samples differ only in their chain composition due to the purity of the oleylamine (chain precursor). Lipid 8 (using the oleylamine of technical grade for cost-efficient synthesis) shows lateral phase separation in the Langmuir layers. However, the amount of attached DNA, determined by IRRAS, is for both samples the same. In 3D systems, lipid 8 p forms cubic phases, which disappear after addition of DNA. At physiological temperatures, both lipids (alone and in mixture with cholesterol) assemble to lamellar aggregates and exhibit comparable DNA delivery efficiency. This study demonstrates that non-lamellar structures are not compulsory for high transfection rates. The results legitimate the utilization of oleyl chains of technical grade in the synthesis of cationic transfection lipids.

Recent progress in gene therapy to deliver nucleic acids with multivalent cationic vectors

Due to the potential use as transfecting agents of nucleic acids (DNA or RNA), multivalent cationic non-viral vectors have received special attention in the last decade. Much effort has been addressed to synthesize more efficient and biocompatible gene vectors able to transport nucleic acids into the cells without provoking an immune response. Among them, the mostly explored to compact and transfect nucleic acids are: (a) gemini and multivalent cationic lipids, mixed with a helper lipid, by forming lipoplexes; and (b) cationic polymers, polycations, and polyrotaxanes, by forming polyplexes. This review is focused on the progress and recent advances experimented in this area, mainly during the present decade, devoting special attention to the lipoplexes and polyplexes, as follows: (a) to its biophysical characterization (mainly electrostatics, structure, size and morphology) using a wide variety of experimental methods; and (b) to its biological activity (transfection efficacy and cytotoxicity) addressed to confirm the optimum formulations and viability of these complexes as very promising gene vectors of nucleic acids in nanomedicine.

Interactions between DNA and gemini surfactant: impact on gene therapy: part II

Nonviral gene delivery, provides distinct treatment modalities for the inherited and acquired diseases, relies upon the encapsulation of a gene of interest, which is then ideally delivered to the target cells. Variations in the chemical structure of gemini surfactants and subsequent physicochemical characteristics of the gemini-based lipoplexes and their impact on efficient gene transfection were assessed in part I, which was published in first March 2016 issue of Nanomedicine (1103). In order to design an efficient vector using gemini surfactants, the interaction of the surfactant with DNA and other components of the delivery system must be characterized, and more critically, well understood. Such studies will help to understand how nonviral transfection complexes, in general, overcome various cellular barriers. The Langmuir-Blodgett monolayer studies, atomic force microscopy, differential scanning calorimetry, isothermal titration calorimetry, small-angle x-ray scattering, are extensively used to evaluate the interaction behavior of gemini surfactants with DNA and other vector components. Part II of this review focuses on the use of these unique techniques to understand their interaction with DNA.

Biocompatible cationic lipids for the formulation of liposomal DNA vectors

Ethylphosphocholine lipids are highly biocompatible cationic amphiphiles that can be used for the formulation of liposomal DNA vectors, with negligible toxic effects on cells and organisms. Here we report the characterization of EDPPC (1,2-dipalmitoyl-sn-glycero-O-ethyl-3-phosphocholine chloride) liposomes, containing two different zwitterionic helper lipids, POPC (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine) and DOPE (1,2-dioleoyl-sn-glycero-3-phosphoethanolamine). Depending on the nature of the helper lipid, a phase separation in the bilayer is found at room temperature, where domains enriched in the cationic component coexist in a relatively large temperature range with regions where the zwitterionic lipids are predominant. We studied DNA complexation, the internal structure of lipoplexes and their docking and fusogenic ability with model target bilayers. The structural and functional modifications caused by DNA binding were studied using Dynamic Light Scattering (DLS), zeta potential, and small and wide angle X-ray scattering (SAXS-WAXS) measurements, while the interaction with membranes was assessed by using Giant Unilamellar Vesicles (GUVs) as model target bilayers. The results presented establish a connection between the physicochemical properties of lipid bilayers, and in particular of lipid demixing, with the phase state of the complexes and their ability to interact with model membranes.

Oligonucleotides and polynucleotides condensation onto liposome surface: effects of the base and of the nucleotide length

The association behavior of different nucleic acids with cationic liposomes has been monitored, in order to find out how the polymer length, the type of base and the charge density affect the lipoplex formation. In particular the associative features displayed by the homopolymer 20-mer of adenine, Oligo (dA), of timine, Oligo (dT), and of guanine, Oligo (dG), were compared to understand the role of the base. The effects of the nucleic acid length and of the charge density were evaluated taking account of the association of the polyadenylic acid and of the DNA onto the liposomes. The results show that the homopolymer Oligo (dG) is able to interact with the cationic liposomes to the same extent as DNA, in spite of the fact that Oligo (dG) is a short polymer made of 20 residues and DNA is a longer and dual strand polymer having a higher charge density.