Confinement-dependent friction in peptide bundles

Mechanical deformation affects the counterion condensation in highly-swollen polyelectrolyte hydrogels

Polyelectrolyte gels can generate electric potentials under mechanical deformation. While the underlying mechanism of such a response is often attributed to changes in counterion-condensation levels or alterations in the ionic conditions in the pervaded volume of the hydrogel, the exact molecular origins are largely unknown. By using all-atom molecular dynamics simulations of a polyacrylic acid hydrogel in explicit water as a model system, we simulate the uniaxial compression and uniaxial stretching of weakly to highly swollen (i.e., between 60-90% solvent content) hydrogel networks and calculate the microscopic condensation levels of counterions around the hydrogel chains. The counterion condensation under deformation is highly non-monotonic. Ionic condensation around the constituting chains of the deformed hydrogel tends to increase as the chains are stretched. This increase reaches a maximum and decreases as the chains are strongly stretched. The condensation around the collapsed chains of the hydrogel is weakly affected by the deformation. As a result, both compressing and stretching the model hydrogel lead to an overall increase in the counterion condensation. The effect vanishes for weakly swollen hydrogels, for which most ions are already condensed. The simulations with single, stretched polyelectrolyte chains show a qualitatively similar response, suggesting the effect of chain elongation on the ionic distribution throughout the hydrogel. Notably, this deformation-induced counterion condensation phenomenon does not occur in a polyelectrolyte solution at its critical concentration, indicating the role of hydrogel topology constraining the chain ends. Our results indicate that counterion condensation in a deforming polyelectrolyte hydrogel can be highly heterogeneous and exhibit a rich behaviour of electrostatic responses.

Anisotropic Friction in a Ligand-Protein Complex

The effect of an externally applied directional force on molecular friction is so far poorly understood. Here, we study the force-driven dissociation of the ligand-protein complex biotin-streptavidin and identify anisotropic friction as a not yet described type of molecular friction. Using AFM-based stereographic single molecule force spectroscopy and targeted molecular dynamics simulations, we find that the rupture force and friction for biotin-streptavidin vary with the pulling angle. This observation holds true for friction extracted from Kramers' rate expression and by dissipation-corrected targeted molecular dynamics simulations based on Jarzynski's identity. We rule out ligand solvation and protein-internal friction as sources of the angle-dependent friction. Instead, we observe a heterogeneity in free energy barriers along an experimentally uncontrolled orientation parameter, which increases the rupture force variance and therefore the overall friction. We anticipate that anisotropic friction needs to be accounted for in a complete understanding of friction in biomolecular dynamics and anisotropic mechanical environments.

Effect of Charge State on the Equilibrium and Kinetic Properties of Mechanically Interlocked [5]Rotaxane: A Molecular Dynamics Study

Rotaxanes can exhibit stimuli-responsive behavior by allowing positional fluctuations of their rota groups in response to physiochemical conditions such as the changes in solution pH. However, ionic strength of the solution also affects the molecular conformation by altering the charge state of the entire molecule, coupling the stimuli-responsiveness of rotaxanes with their conformation. A molecular-scale investigation on a model system can allow the decoupling and identification of various effects and can greatly benefit applications of such molecular switches. By using atomistic molecular dynamics simulations, we study equilibrium and kinetics properties of various charge states of the [5]rotaxane, which is a supramolecular moiety with four rotaxanes bonded to a porphyrin core. We model various physiochemical charge states, each of which can be realized at various solution pH levels as well as several exotic charge distributions. By analyzing molecular configurations, hydrogen bonding, and energetics of single molecules in salt-free water and its polyrotaxanated network at the interface of water and chloroform, we demonstrate that charge-neutral and negatively charged molecules often tend to collapse in a way that they can expose their porphyrin core. Contrarily, positively charged moieties tend to take more extended molecular configurations blocking the core. Further, sudden changes in the charge states emulating the pH alterations in solution conditions lead to rapid, sub-10 ns level, changes in the molecular conformation of [5]rotaxane via shuttling motion of CB6 rings along axles. Finally, simulations of 2D [5]rotaxane network structures support our previous findings on a few nanometer-thick film formation at oil-water interfaces. Overall, our results suggest that rotaxane-based structures can exhibit a rich spectrum of molecular configurations and kinetics depending on the ionic strength of the solution.

Principal component analysis of nonequilibrium molecular dynamics simulations

Principal component analysis (PCA) represents a standard approach to identify collective variables {x_i} = x, which can be used to construct the free energy landscape ΔG(x) of a molecular system. While PCA is routinely applied to equilibrium molecular dynamics (MD) simulations, it is less obvious as to how to extend the approach to nonequilibrium simulation techniques. This includes, e.g., the definition of the statistical averages employed in PCA as well as the relation between the equilibrium free energy landscape ΔG(x) and the energy landscapes ΔG(x) obtained from nonequilibrium MD. As an example for a nonequilibrium method, "targeted MD" is considered which employs a moving distance constraint to enforce rare transitions along some biasing coordinate s. The introduced bias can be described by a weighting function P(s), which provides a direct relation between equilibrium and nonequilibrium data, and thus establishes a well-defined way to perform PCA on nonequilibrium data. While the resulting distribution P(x) and energy ΔG∝lnP will not reflect the equilibrium state of the system, the nonequilibrium energy landscape ΔG(x) may directly reveal the molecular reaction mechanism. Applied to targeted MD simulations of the unfolding of decaalanine, for example, a PCA performed on backbone dihedral angles is shown to discriminate several unfolding pathways. Although the formulation is in principle exact, its practical use depends critically on the choice of the biasing coordinate s, which should account for a naturally occurring motion between two well-defined end-states of the system.

Effects of electrostatic interactions on ligand dissociation kinetics

We study unbinding of multivalent cationic ligands from oppositely charged polymeric binding sites sparsely grafted on a flat neutral substrate. Our molecular dynamics simulations are suggested by single-molecule studies of protein-DNA interactions. We consider univalent salt concentrations spanning roughly a 1000-fold range, together with various concentrations of excess ligands in solution. To reveal the ionic effects on unbinding kinetics of spontaneous and facilitated dissociation mechanisms, we treat electrostatic interactions both at a Debye-Hückel (DH) (or implicit ions, i.e., use of an electrostatic potential with a prescribed decay length) level and by the more precise approach of considering all ionic species explicitly in the simulations. We find that the DH approach systematically overestimates unbinding rates, relative to the calculations where all ion pairs are present explicitly in solution, although many aspects of the two types of calculation are qualitatively similar. For facilitated dissociation (FD) (acceleration of unbinding by free ligands in solution) explicit-ion simulations lead to unbinding at lower free-ligand concentrations. Our simulations predict a variety of FD regimes as a function of free-ligand and ion concentrations; a particularly interesting regime is at intermediate concentrations of ligands where nonelectrostatic binding strength controls FD. We conclude that explicit-ion electrostatic modeling is an essential component to quantitatively tackle problems in molecular ligand dissociation, including nucleic-acid-binding proteins.

Dynamics of Seeded Aβ40-Fibril Growth from Atomistic Molecular Dynamics Simulations: Kinetic Trapping and Reduced Water Mobility in the Locking Step

Filamentous β-amyloid aggregates are crucial for the pathology of Alzheimer's disease. Despite the tremendous biomedical importance, the molecular pathway of growth propagation is not completely understood and remains challenging to investigate by simulations due to the long time scales involved. Here, we apply extensive all-atom molecular dynamics simulations in explicit water to obtain free energy profiles and kinetic information from position-dependent diffusion profiles for three different Aβ9-40-growth processes: fibril elongation by single monomers at the structurally unequal filament tips and association of larger filament fragments. Our approach provides insight into the molecular steps of the kinetic pathway and allows close agreement with experimental binding free energies and macroscopic growth rates. Water plays a decisive role, and solvent entropy is identified as the main driving force for assembly. Fibril growth is disfavored energetically due to cancellation of direct peptide-peptide interactions and solvation effects. The kinetics of growth is consistent with the characteristic dock/lock mechanism, and docking is at least 2 orders of magnitude faster. During initial docking, interactions are mediated by transient non-native hydrogen bonds, which efficiently catch the incoming monomer or fragment already at separations of about 3 nm. In subsequent locking, the dynamics is much slower due to formation of kinetically trapped conformations caused by long-lived non-native hydrogen bonds. Fibril growth additionally requires collective motion of water molecules to create a dry binding interface. Fibril growth is further retarded due to reduced mobility of the involved hydration water, evident from a 2-fold reduction of the diffusion coefficient.

Unfolding and folding internal friction of β-hairpins is smaller than that of α-helices

By the forced unfolding of polyglutamine and polyalanine homopeptides in competing α-helix and β-hairpin secondary structures, we disentangle equilibrium free energetics from nonequilibrium dissipative effects. We find that α-helices are characterized by larger friction or dissipation upon unfolding, regardless of whether they are free energetically preferred over β-hairpins or not. Our analysis, based on MD simulations for atomistic peptide models with explicit water, suggests that this difference is related to the internal friction and mostly caused by the different number of intrapeptide hydrogen bonds in the α-helix and β-hairpin states.

Rate-dependent behavior of the amorphous phase of spider dragline silk

The time-dependent stress-strain behavior of spider dragline silk was already observed decades ago, and has been attributed to the disordered sequences in silk proteins, which compose the soft amorphous matrix. However, the actual molecular origin and magnitude of internal friction within the amorphous matrix has remained inaccessible, because experimentally decomposing the mechanical response of the amorphous matrix from the embedded crystalline units is challenging. Here, we used atomistic molecular dynamics simulations to obtain friction forces for the relative sliding of peptide chains of Araneus diadematus spider silk within bundles of these chains as a representative unit of the amorphous matrix in silk fibers. We computed the friction coefficient and coefficient of viscosity of the amorphous phase to be in the order of 10(-6) Ns/m and 10(4) Ns/m(2), respectively, by extrapolating our simulation data to the viscous limit. Finally, we used a finite element method for the amorphous phase, solely based on parameters derived from molecular dynamics simulations including the newly determined coefficient of viscosity. With this model the time scales of stress relaxation, creep, and hysteresis were assessed, and found to be in line with the macroscopic time-dependent response of silk fibers. Our results suggest the amorphous phase to be the primary source of viscosity in silk and open up the avenue for finite element method studies of silk fiber mechanics including viscous effects.

Viscous friction between crystalline and amorphous phase of dragline silk

The hierarchical structure of spider dragline silk is composed of two major constituents, the amorphous phase and crystalline units, and its mechanical response has been attributed to these prime constituents. Silk mechanics, however, might also be influenced by the resistance against sliding of these two phases relative to each other under load. We here used atomistic molecular dynamics (MD) simulations to obtain friction forces for the relative sliding of the amorphous phase and crystalline units of Araneus diadematus spider silk. We computed the coefficient of viscosity of this interface to be in the order of 10(2) Ns/m(2) by extrapolating our simulation data to the viscous limit. Interestingly, this value is two orders of magnitude smaller than the coefficient of viscosity within the amorphous phase. This suggests that sliding along a planar and homogeneous surface of straight polyalanine chains is much less hindered than within entangled disordered chains. Finally, in a simple finite element model, which is based on parameters determined from MD simulations including the newly deduced coefficient of viscosity, we assessed the frictional behavior between these two components for the experimental range of relative pulling velocities. We found that a perfectly relative horizontal motion has no significant resistance against sliding, however, slightly inclined loading causes measurable resistance. Our analysis paves the way towards a finite element model of silk fibers in which crystalline units can slide, move and rearrange themselves in the fiber during loading.

Assessment of local friction in protein folding dynamics using a helix cross-linker

Internal friction arising from local steric hindrance and/or the excluded volume effect plays an important role in controlling not only the dynamics of protein folding but also conformational transitions occurring within the native state potential well. However, experimental assessment of such local friction is difficult because it does not manifest itself as an independent experimental observable. Herein, we demonstrate, using the miniprotein trp-cage as a testbed, that it is possible to selectively increase the local mass density in a protein and hence the magnitude of local friction, thus making its effect directly measurable via folding kinetic studies. Specifically, we show that when a helix cross-linker, m-xylene, is placed near the most congested region of the trp-cage it leads to a significant decrease in both the folding rate (by a factor of 3.8) and unfolding rate (by a factor of 2.5 at 35 °C) but has little effect on protein stability. Thus, these results, in conjunction with those obtained with another cross-linked trp-cage and two uncross-linked variants, demonstrate the feasibility of using a nonperturbing cross-linker to help quantify the effect of internal friction. In addition, we estimate that a m-xylene cross-linker could lead to an increase in the roughness of the folding energy landscape by as much as 0.4-1.0k(B)T.