Adhesion and friction of an isolated gecko setal array: The effects of substrates and relative humidity

Tailoring and application of a multi-responsive cellulose nanofibre-based 3D nanonetwork wound dressing

The rapid loss of drugs and the weak curative effects due to cyclical urination are the main reasons why wound heal with difficulty after bladder tumour resection. Here, a bioinspired cellulose nanofibre (CNF)-based magnetic 3D nanonetwork wound dressing with excellent tissue adhesion and biocompatibility is designed by the assembly of pH- and near infrared-responsive CNF nanoskeletons, magnetic switching Fe₃O₄ nanoparticles, and temperature switching Pluronic®F-127. The dressing with high loading capacity for mitomycin and indocyanine green can form a sticky 3D nanonetwork at the wound site and remain for a long time to release drugs through an external magnetic field. Interestingly, the dressing possessed excellent antibacterial activity, bacterial biofilm elimination, T24 tumour cell killing, and wound healing promotion through photothermal, photodynamic, and chemotherapy. Therefore, it has promising application for bladder postoperative infected wound healing to avoid rapid loss of drugs due to cyclical urination.

Effects of loading and unloading control parameters on adhesive performance for biomimetic controllable adhesive with wedge-shaped microstructures

The adhesive performance of biomimetic controllable adhesive based on wedge-shaped microstructures is affected by some relevant control parameters in the process of loading and unloading. An appropriate selection of these control parameters is of great significance for its effective application. However, little research has concentratively and comprehensively explored these control parameters. In order to make up for the shortcoming, this study systematically explored the macroscopic adhesive performance of the self-developed wedge-shaped microstructures under different loading and unloading control parameters. The results show that preloading depth and tangential dragging distance have a positive effect on the adhesive performance, while preloading angle and peeling angle have a negative effect on the adhesive performance. Specifically, a low preloading angle can weaken the normal preloading force under the same preloading depth, thereby improving the preloading benefit; the application of tangential dragging distance can also induce the normal preloading force generated in the preloading stage to change the adhesion, so as to stimulate more adhesion. Based on the interactive analysis of these control parameters, it can be sure that applying a moderate normal preloading force and a larger tangential dragging distance to the wedge-shaped microstructures at low preloading angle not only makes the wedge-shaped microstructures possess better adhesive capacity, but also can obtain a good preloading benefit. In addition, the promotion effect of a low peeling angle on the adhesive performance also implies that a higher peeling angle should be used to realize the easy detachment of the adhesive interface. The first concentrative and comprehensive investigation of the relevant control parameters of wedge-shaped microstructures lays the foundation for designing a climbing robot or adhesive gripper based on the wedge-shaped microstructures, and also provides guidance for formulating the corresponding control strategies.

Direct evidence of acid-base interactions in gecko adhesion

While it is generally accepted that van der Waals (vdW) forces govern gecko adhesion, several studies indicate contributions from non-vdW forces and highlight the importance of understanding the adhesive contact interface. Previous work hypothesized that the surface of gecko setae is hydrophobic, with nonpolar lipid tails exposed on the surface. However, direct experimental evidence supporting this hypothesis and its implications on the adhesion mechanism is lacking. Here, we investigate the sapphire-setae contact interface using interface-sensitive spectroscopy and provide direct evidence of the involvement of acid-base interactions between polar lipid headgroups exposed on the setal surface and sapphire. During detachment, a layer of unbound lipids is left as a footprint due to cohesive failure within the lipid layer, which, in turn, reduces wear to setae during high stress sliding. The absence of this lipid layer enhances adhesion, despite a small setal-substrate contact area. Our results show that gecko adhesion is not exclusively a vdW-based, residue-free system.

On the physicochemical origin of nanoscale friction: the polarizability and electronegativity relationship tailoring nanotribology

Friction is a ubiquitous manifestation of nature, and when it is studied at the nanoscale, complex and interesting effects arise from fundamental physical and chemical surface properties. Surprisingly, and probably due to the complexity of nanofriction studies, this aspect has not been completely discussed in prior studies. To fully consider the physicochemical influence in nanoscale friction, amorphous carbon films with different amounts of hydrogen and fluorine were prepared, chemically characterized, and evaluated via lateral force microscopy. Hydrogen and fluorine were selected because although they exhibit different physicochemical properties, both contribute to frictional force reduction. Indeed, to explain the experimental behavior, it is necessary to propose a new damping constant unifying both polarizability (physical) and electronegativity (chemical) properties. The satisfactory agreement between theory and experiments may encourage and enhance deeper discussion and new experiments that take into account the chemical peculiarities of frictional behavior relating to nanoscale elastic regimes.

Stick or Slip: Adhesive Performance of Geckos and Gecko-Inspired Synthetics in Wet Environments

The gecko adhesive system has inspired hundreds of synthetic mimics principally focused on replicating the strong, reversible, and versatile properties of the natural system. For geckos native to the tropics, versatility includes the need to remain attached to substrates that become wet from high humidity and frequent rain. Paradoxically, van der Waals forces, the principal mechanism responsible for gecko adhesion, reduce to zero when two contacting surfaces separate even slightly by entrapped water layers. A series of laboratory studies show that instead of slipping, geckos maintain and even improve their adhesive performance in many wet conditions (i.e., on wet hydrophobic substrates, on humid substrates held at low temperatures). The mechanism for this is not fully clarified, and likely ranges in scale from the chemical and material properties of the gecko's contact structures called setae (e.g., setae soften and change surface confirmation when exposed to water), to their locomotor biomechanics and decision-making behavior when encountering water on a substrate in their natural environment (e.g., some geckos tend to run faster and stop more frequently on misted substrates than dry). Current work has also focused on applying results from the natural system to gecko-inspired synthetic adhesives, improving their performance in wet conditions. Gecko-inspired synthetic adhesives have also provided a unique opportunity to test hypotheses about the natural system in semi-natural conditions replicated in the laboratory. Despite many detailed studies focused on the role of water and humidity on gecko and gecko-inspired synthetic adhesion, there remains several outstanding questions: (1) what, if any, role does capillary or capillary-like adhesion play on overall adhesive performance of geckos and gecko-inspired synthetics, (2) how do chemical and material changes at the surface and in the bulk of gecko setae and synthetic fibrils change when exposed to water, and what does this mean for adhesive performance, and (3) how much water do geckos encounter in their native environment, and what is their corresponding behavioral response? This review will detail what we know about gecko adhesion in wet environments, and outline the necessary next steps in biological and synthetic system investigations.

Characterizing the surface forces between two individual nanowires using optical microscopy based nanomanipulation

The adhesion and friction between two Al₂O₃ nanowires (NWs) was characterized by the use of optical microscopy based nanomanipulation, with which peeling, shearing and sliding was performed. The elastically deformed shape of the NWs during peeling and shearing was used to calculate the adhesion and frictional forces; force sensing was not required. The obtained adhesion stress between two Al₂O₃ NWs varied from 0.14 to 0.25 MPa, lower than that observed for carbon nanotube junctions, and was attributed to van der Waals attraction. Stick-slip was observed during the shearing and sliding of two NWs, and was the consequence of discrete contact between surface asperities. The obtained static and kinetic frictional stresses varied from 0.7 to 1.3 MPa and 0.4 to 0.8 MPa, respectively; significantly greater than the obtained adhesion stress.

Sticking to the story: outstanding challenges in gecko-inspired adhesives

The natural clinging ability of geckos has inspired hundreds of studies seeking design principles that could be applied to creating synthetic adhesives with the same performance capabilities as the gecko: adhesives that use no glue, are self-cleaning and reusable, and are insensitive to a wide range of surface chemistries and roughness. Important progress has been made, and the basic mechanics of how 'hairy' adhesives work have been faithfully reproduced, advancing theory in surface science and portending diverse practical applications. However, after 15 years, no synthetic mimic can yet perform as well as a gecko and simultaneously meet of all the criteria listed above. Moreover, processes for the production of inexpensive and scalable products are still not clearly in view. Here, we discuss our perspective on some of the gaps in understanding that still remain; these gaps in our knowledge should stimulate us to turn to deeper study of the way in which free-ranging geckos stick to the variety of surfaces found in their natural environments and to a more complete analysis of the materials composing the gecko toe pads.

The effect of temperature and humidity on adhesion of a gecko-inspired adhesive: implications for the natural system

The adhesive system of geckos has inspired hundreds of synthetic adhesives. While this system has been used relentlessly as a source of inspiration, less work has been done in reverse, where synthetics are used to test questions and hypotheses about the natural system. Here we take such an approach. We tested shear adhesion of a mushroom-tipped synthetic gecko adhesive under conditions that produced perplexing results in the natural adhesive system. Synthetic samples were tested at two temperatures (12 °C and 32 °C) and four different humidity levels (30%, 55%, 70%, and 80% RH). Surprisingly, adhesive performance of the synthetic samples matched that of living geckos, suggesting that uncontrolled parameters in the natural system, such as surface chemistry and material changes, may not be as influential in whole-animal performance as previously thought. There was one difference, however, when comparing natural and synthetic adhesive performance. At 12 °C and 80% RH, adhesion of the synthetic structures was lower than expected based on the natural system's performance. Our approach highlights a unique opportunity for both biologists and material scientists, where new questions and hypotheses can be fueled by joint comparisons of the natural and synthetic systems, ultimately improving knowledge of both.