Bioadsorption of a reactive dye from aqueous solution by municipal solid waste

Physicochemical properties and performance of non-woody derived biochars for the sustainable removal of aquatic pollutants: A systematic review

Biochar is a carbon-rich material produced from the partial combustion of different biomass residues. It can be used as a promising material for adsorbing pollutants from soil and water and promoting environmental sustainability. Extensive research has been conducted on biochars prepared from different feedstocks used for pollutant removal. However, a comprehensive review of biochar derived from non-woody feedstocks (NWF) and its physiochemical attributes, adsorption capacities, and performance in removing heavy metals, antibiotics, and organic pollutants from water systems needs to be included. This review revealed that the biochars derived from NWF and their adsorption efficiency varied greatly according to pyrolysis temperatures. However, biochars (NWF) pyrolyzed at higher temperatures (400-800 °C) manifested excellent physiochemical and structural attributes as well as significant removal effectiveness against antibiotics, heavy metals, and organic compounds from contaminated water. This review further highlighted why biochars prepared from NWF are most valuable/beneficial for water treatment. What preparatory conditions (pyrolysis temperature, residence time, heating rate, and gas flow rate) are necessary to design a desirable biochar containing superior physiochemical and structural properties, and adsorption efficiency for aquatic pollutants? The findings of this review will provide new research directions in the field of water decontamination through the application of NWF-derived adsorbents.

Use of biomass-derived biochar in wastewater treatment and power production: A promising solution for a sustainable environment

Over the past few years, we are witnessing the advent of a revolutionary bioengineering technology in biochar production and its application in waste treatment and an important component in power generation devices. Biochar is a solid product, highly rich in carbon, whose adsorption properties are ideal for wastewater decontamination. Due to its high specific surface area to volume ratio, it can be utilized for many environmental applications. It has diverse applications in various fields. This review focuses on its various applications in wastewater treatment to remove various pollutants such as heavy metals, dyes, organic compounds, and pesticides. This review also highlights several energy-based applications in batteries, supercapacitors, and microbial fuel cells. It described information about the different feedstock materials to produce LB-derived biochar, the various conditions for the production process, i.e., pyrolysis and the modification methods of biochar for improving properties required for wastewater treatment. The present review helps the readers understand the importance of biochar in wastewater treatment and its application in power generation in terms of batteries, supercapacitors, microbial fuel cells, applications in fuel production, pollutant and dye removal, particularly the latest development on using LB-derived biochar. This review also highlights the economic and environmental sustainability along with the commercialization of biochar plants. It also describes various pyrolytic reactors utilized for biochar production.

A critical review on the biochar production techniques, characterization, stability and applications for circular bioeconomy

•

Recent research on remediation of toxic pollutants by biochar has been summarized.

•

The production techniques of the biochar have been narrated.

•

Biochar properties, stability and its environmental issues have been analysed.

•

Applications of biochar in soil fertility and removing pollutants have been reported.

•

The major stumbling block in biochar production is cost of production.

There is an upsurge enthusiasm for utilizing biochar produced from waste-biomass in different fields, to address the most important ecological issues. This review is focused on an overview of remediating harmful contaminants utilizing biochar. Production of biochar utilizing various systems has been discussed. Biochar has received the consideration of numerous analysts in building up their proficiency to remediate contaminants. Process parameters are fundamentally answerable for deciding the yield of biomass. Biochar derived from biomass is an exceptionally rich wellspring of carbon produced from biomass utilizing thermal combustion. Activating biochar is another particular region for the growing utilization of biochar for expelling specific contaminations. Closed-loop systems to produce biochar creates more opportunities. Decentralized biochar production techniques serve as an effective way of providing employment opportunities, managing wastes, increasing resource proficiency in circular bioeconomy. This paper also covers knowledge gaps and perspectives in the field of remediation of toxic pollutants using biochar.

Study of the Digestate as an Innovative and Low-Cost Adsorbent for the Removal of Dyes in Wastewater

Digestate, as an urban solid waste, was considered as an innovative adsorbent for colorant polluted wastewater. Batch adsorption experiments were carried out using digestate as an adsorbent material to remove various dyes belonging to different categories. The removal rate and adsorption capacity of dyes were evaluated and the dose of digestate, contact time, and initial dye concentration were studied. The maximum removal rate was approximately 96% for Methylene Blue. The equilibrium time for the Methylene Blue was 4 h, while for other dyes, a longer contact time was required to reach the equilibrium. The suspicion of colloidal matter release into the solution from solid fraction of the digestate led to the investigation of the consequence of a washing step of the digestate adsorbent upstream the adsorption experiment. Washed and not washed adsorbents were tested and the differences between them in terms of dye removal were compared. Moreover, experimental data were fitted by pseudo-first order, pseudo-second order, and intra-partial diffusion kinetic models as well as Langmuir, Freundlich, and Sips isotherm models. The results from fitted models showed that the adsorption of various dyes onto the digestate was mostly well fitted by the Langmuir isotherm and pseudo-second-order kinetic model.

Biosorption of dicloxacillin from pharmaceutical waste water using tannin from Indian almond leaf: Kinetic and equilibrium studies

•

The maximum adsorption capacity was 86.93 %.

•

Experimental data were in agreement with pseudo-second-order kinetics.

•

Experimental data were followed Langmuir isotherm model.

•

Biosorption of dicloxacilin onto T. catappa L. biomass is possible, spontaneous and exothermic process.

This study focused on the use of Indian almond leaf biomass, a local plant widely found in Thailand, on removal of dicloxacillin from pharmaceutical waste water by biosorption. The biosorption characteristics of dicloxacillin were investigated in terms of equilibrium, kinetics and thermodynamics. Optimum biosorption conditions were determined from pH, initial dicloxacillin concentration, biomass dosage, contact time, and temperature. The maximum adsorption capacity was 86.93 % (pH 6.0, 0.1 g/L biomass, dicloxacillin concentration 20 mg/L, contact time 24 h, temperature 283.15 K). The thermodynamic parameters (298.15 K), free energy change, enthalpy change and entropy change were -3475.79 J/mol, −25.36 kJ/mol, and −73.40 J/mol/K, respectively. The best interpretation for the experimental data was given by the Langmuir isotherm with correlation coefficient of 0.965. The results were found to tie in well with pseudo-second-order kinetics. Considering the cost-effectiveness, Indian almond leaf biomass is considered to be suitable to remove dicloxacillin from pharmaceutical waste water.

A Novel Adsorbent Magnetic Graphene Oxide Modified with Chitosan for the Simultaneous Reduction of Mycotoxins

A novel magnetic graphene oxide modified with chitosan (MGO-CTS) was synthesised as an adsorbent aimed to examine the simultaneous removal of mycotoxins. The composite was characterised by various procedures, namely Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and a scanning electron microscope (SEM). The adsorption evaluation was considered via pH effects, initial mycotoxin concentration, adsorption time and temperature. Adsorption isotherm data and kinetics experiments were acquired at the optimum pH 5 fit Freundlich isotherm as well as pseudo-second-order kinetic models. The thermodynamic results indicated that the adsorption of the mycotoxins was spontaneous, endothermic and favourable.

Ouricuri (Syagrus coronata) fiber: a novel biosorbent to remove methylene blue from aqueous solutions

In this work, the potential of ouricuri (Syagrus coronata) fiber as a novel biosorbent to remove methylene blue (MB) from aqueous solutions was investigated. The fiber was prepared and characterized according to the fundamental features for adsorption. A 2³ experimental design was used to evaluate the effects of adsorbent dosage (M), fiber diameter (D) and agitation (A) on the adsorption capacity. In the more adequate conditions, kinetic and equilibrium studies were performed. The experimental design results showed that M = 10 g L^-1), D = 0.595 mm and A = 200 rpm were the more adequate conditions for MB adsorption. Based on the kinetic study, it was found that the adsorption process was fast, being the equilibrium was attained at about 5 min, with 90% of color removal. The isotherm was properly represented by the Sips model, and the maximum adsorption capacity was 31.7 mg g^-1. In brief, it was demonstrated that ouricuri fiber is an alternative biosorbent to remove MB from aqueous media, taking into account the process efficiency and economic viewpoint.