Characterization of Scenedesmus obtusiusculus AT-UAM for high-energy molecules accumulation: deeper insight into biotechnological potential of strains of the same species

Lutein Production by Halophilic Microalgae Using Anaerobic Digestate as the Substrate and Its Potential Application as a Biopesticide

Production of value-added products from waste anaerobic digestate is economically and environmentally important for sustainable development of industrial process and products. In this study halophilic microalgae, Chlorella vulgaris 92001, Chlorella vulgaris 50291, Chlorella vulgaris 10241 and Tetraselmis indica, were initially screened for lutein production using synthetic dairy digestate (DD), municipal digestate (MD) and poultry digestate (PD) as no-cost substrates. Screening and optimization of parameters, such as dilution, pH, MgCl2, NaCl, NaHCO3 and inoculum concentration for maximum lutein production were further performed employing statistically designed Plackett-Burman and response surface methodology. Cultivation of C. vulgaris 92001 in a split column photobioreactor under optimum culture condition showed increase in lutein production by 2.36-fold in batch mode. The influence of different hydraulic retention time (HRT) values of 150, 130, 100 and 90 h on lutein production was evaluated in continuous mode with the split column photobioreactor. Lutein produced using the synthetic poultry digestate showed good potential biopesticide activity against Spodoptera litura (fall armyworm). Overall, this study demonstrated bioprocess development to produce lutein using synthetic anaerobic digestate from marine algae and its potential application as a biopesticide.

Microalgae as tools for bio-circular-green economy: Zero-waste approaches for sustainable production and biorefineries of microalgal biomass

Microalgae are promising organisms that are rapidly gaining much attention due to their numerous advantages and applications, especially in biorefineries for various bioenergy and biochemicals. This review focuses on the microalgae contributions to Bio-Circular-Green (BCG) economy, in which zero-waste approaches for sustainable production and biorefineries of microalgal biomass are introduced and their possible integration is discussed. Firstly, overviews of wastewater upcycling and greenhouse gas capture by microalgae are given. Then, a variety of valuable products from microalgal biomass, e.g., pigments, vitamins, proteins/peptides, carbohydrates, lipids, polyunsaturated fatty acids, and exopolysaccharides, are summarized to emphasize their biorefinery potential. Techno-economic and environmental analyses have been used to evaluate sustainability of microalgal biomass production systems. Finally, key issues, future perspectives, and challenges for zero-waste microalgal biorefineries, e.g., cost-effective techniques and innovative integrations with other viable processes, are discussed. These strategies not only make microalgae-based industries commercially feasible and sustainable but also reduce environmental impacts.

Recent Advances in Marine Microalgae Production: Highlighting Human Health Products from Microalgae in View of the Coronavirus Pandemic (COVID-19)

Blue biotechnology can greatly help solve some of the most serious social problems due to its wide biodiversity, which includes marine environments. Microalgae are important resources for human needs as an alternative to terrestrial plants because of their rich biodiversity, rapid growth, and product contributions in many fields. The production scheme for microalgae biomass mainly consists of two processes: (I) the Build-Up process and (II) the Pull-Down process. The Build-Up process consists of (1) the super strain concept and (2) cultivation aspects. The Pull-Down process includes (1) harvesting and (2) drying algal biomass. In some cases, such as the manufacture of algal products, the (3) extraction of bioactive compounds is included. Microalgae have a wide range of commercial applications, such as in aquaculture, biofertilizer, bioenergy, pharmaceuticals, and functional foods, which have several industrial and academic applications around the world. The efficiency and success of biomedical products derived from microalgal biomass or its metabolites mainly depend on the technologies used in the cultivation, harvesting, drying, and extraction of microalgae bioactive molecules. The current review focuses on recent advanced technologies that enhance microalgae biomass within microalgae production schemes. Moreover, the current work highlights marine drugs and human health products derived from microalgae that can improve human immunity and reduce viral activities, especially COVID-19.

Energy and nutrients recovery from wastewater cultivated microalgae: Assessment of the impact of wastewater dilution on biogas yield

In this study, microalgae culture was integrated into wastewater treatment as tertiary treatment to recover nutrients such as nitrogen and phosphorous. Different wastewater dilutions were assessed to investigate the effect on microalgae biomass composition for further energy recovery in the form of biogas: photobioreactor (PBR)1: control; PBR2: 10% wastewater; PBR3 50% wastewater and PBR4: 100% wastewater. After 10 days of cultivation, PBR3 presented the highest biomass productivity, which was 47.37% higher than the control. All PBRs containing wastewater presented a 100% removal of phosphorous and up to 97.85% removal of ammonia nitrogen. Each microalgae biomass was harvested and dried for further biogas production, although no significant difference was observed, PBR4 presented a higher biogas accumulated production of 204.47 mL. These results suggest that it is suitable to integrate microalgae culture as a wastewater tertiary treatment as nutrients can be recovered in the form of biogas.

Identification, characterization, and lipid profiling of microalgae Scenedesmus sp. NC1, isolated from coal mine effluent with potential for biofuel production

An autoflocculating microalgal strain was isolated from coal mine effluent wastewater which was named as Scenedesmus sp. NC1 after morphological and molecularly characterization. Further analysis of internal transcribed spacer 2 (ITS2) and compensatory base changes (CBCs) showed it does not belong to the clade comprising Scenedesmus sensu stricto. In stationary phase of growth, Scenedesmus sp. NC1 exhibited excellent autoflocculation efficiency (> 88 %) within 150 min of setting. Temperature, pH, and inorganic metals exhibited minor influence on the autoflocculation activity of Scenedesmus sp. NC1. The fatty acid profiling of Scenedesmus sp.NC1 showed that palmitic acid (C16:0), oleic acid (C18:1), and stearic acid (18:0) accounted for more than 68 % of total fatty acids. Moreover, Scenedesmus sp. NC1 demonstrated significant bioflocculation potential over non-flocculating freshwater microalgae, Chlorella sp. NCQ and Micractinium sp. NCS2. Hence, Scenedesmus sp. NC1 could be effective for economical harvesting of other non-flocculating microalgae for productions of biodiesel and other metabolites.

Methanotroph-microalgae co-culture for greenhouse gas mitigation: Effect of initial biomass ratio and methane concentration

This work evaluated the effect of different initial biomass ratios in a co-culture of an alkaliphilic methanotrophic bacteria consortium (AMB) and the green microalga Scenedesmus obtusiusculus (GM) on the maximum CH₄ specific biodegradation rate and global carbon uptake. The highest maximum specific biodegradation rate was 589 ± 0.01 mg_CH4 g_biomass^-1 d^-1 obtained for a proportion of 3:1 AMB-GM (w w^-1) and 8% of initial CH₄ in the headspace. The methane degradation rate was 1.5 times lower than the value obtained solely by the AMB consortium, and it was associated with pH increases due to the evolved CO₂ consumption by the microalga. Increased activity of the AMB consortium along the experiments was due to progressive adaptation. Massive sequencing revealed the presence of methanotrophic/methylotrophic species such as Methylocystis sp., Methylomicrobium sp., Methylophaga sp., and Hyphomicrobium sp. Successful complete methane and carbon dioxide uptake was obtained with the 3:1, 4:1, and 5:1 AMB-GM biomass ratios, while for the rest of the ratios tested, more than 70% of the initial methane was transformed into biomass and inorganic carbon. This study showed that methanotrophic-microalgal co-cultures lead to a promising strategy for greenhouse gases mitigation in one step.

Biomitigation of CO2 from flue gas by Scenedesmus obtusiusculus AT-UAM using a hybrid photobioreactor coupled to a biomass recovery stage by electro-coagulation-flotation

The microalga Scenedesmus obtusiusculus AT-UAM efficiently captured CO₂ from two flue gas streams in a hybrid photobioreactor located in a greenhouse. Uptake rates of CO₂, NO, and SO₂ from a formulated gas stream were 160.7 mg L^-1 day^-1, 0.73 mg L^-1 day^-1, and 1.56 mg L^-1 day^-1, respectively, with removal efficiencies of 100% for all gases. Exhaust gases of a motor generator were also removed with uptake rates of 111.4 mg L^-1 day^-1, 0.42 mg L^-1 day^-1, and 0.98 mg L^-1 day^-1, obtaining removal efficiencies of 77%, 71%, and 53% for CO₂, NO_x, and SO₂, respectively. On average, 61% of the CO₂ from both flue gas streams was assimilated as microalgal biomass. The maximum CO₂ uptake rate of 182 mg L^-1 day^-1 was achieved for formulated flue gas flow rate above 100 mL min^-1. The biomass recovery of 88% was achieved using a 20-L electro-coagulation-flotation chamber coupled to a settler with a low specific power consumption of 0.27 kWh kg^-1. The photobioreactor was operated for almost 7 months without contamination of invasive species or a decrease in the activity. It is a very encouraging result for long-term operation in flue gas treatment.

Exploration of green integrated approach for effluent treatment through mass culture and biofuel production from unicellular alga, Acutodesmus obliquus RDS01

This study deals with the open pond (OP) pilot scale treatment of cassava effluent and enhancement of Ribulose-1,5-bisphosphate carboxylase/oxygenase (RuBisCO) enzyme through CO₂ utilization by the microalga, Acutodesmus obliquus RDS01. The cassava effluent treatment (ET) revealed maximum reduction of ammonia (96.8%), calcium (94.6%), chloride (95.2%), chlorine (98.5%), inorganic phosphate (94.6%), magnesium (96.8%), nitrate (96.89%), organic carbon (95.9%), organic phosphorus (96.3%), potassium (97.9%), sodium (97.1%), and sulfate (95.4%) on 15^th day using A. obliquus. The microalga produced highest RuBisCO enzyme activity (90%), CO₂ utilization efficiency (95%), biomass (8.9 gL^-1), lipid (176.65 mg mL^-1), carbohydrate (96.78 mg mL^-1), biodiesel (4.1 mL g^-1), and bioethanol (3.7 mL g^-1) during OP treatment. The isolated RuBisCO gene (rbcL) was used to construct the protein model by homology modeling. The microalgal-lipid content was analyzed through thin layer chromatography, the biodiesel produced was analyzed using Fourier-transform infrared spectroscopy and gas chromatography mass spectrometry (GCMS). The bioethanol production was confirmed by high performance liquid chromatography and GCMS analyses. A. obliquus produced of 98.75% biodiesel and 96.83% bioethanol in the OP pilot scale treatment A. obliquus. Overall, the microalga A. obliquus could act as an effective CO₂ capturing and bioremediation agent in the cassava ET, and also for the biodiesel and bioethanol can be produced.

Advances in metabolic modeling of oleaginous microalgae

Production of biofuels and bioenergy precursors by phototrophic microorganisms, such as microalgae and cyanobacteria, is a promising alternative to conventional fuels obtained from non-renewable resources. Several species of microalgae have been investigated as potential candidates for the production of biofuels, for the most part due to their exceptional metabolic capability to accumulate large quantities of lipids. Constraint-based modeling, a systems biology approach that accurately predicts the metabolic phenotype of phototrophs, has been deployed to identify suitable culture conditions as well as to explore genetic enhancement strategies for bioproduction. Core metabolic models were employed to gain insight into the central carbon metabolism in photosynthetic microorganisms. More recently, comprehensive genome-scale models, including organelle-specific information at high resolution, have been developed to gain new insight into the metabolism of phototrophic cell factories. Here, we review the current state of the art of constraint-based modeling and computational method development and discuss how advanced models led to increased prediction accuracy and thus improved lipid production in microalgae.