Susceptibility of dibutyryl chitin and regenerated chitin fibres to deacylation and depolymerization by lipases

A Novel Porous Butyryl Chitin-Animal Derived Hydroxyapatite Composite Scaffold for Cranial Bone Defect Repair

Bone defects, a common orthopedic problem in clinical practice, are a serious threat to human health. As alternative materials to autologous bone grafts, synthetic cell-free functionalized scaffolds have been the focus of recent research in designing scaffolds for bone tissue engineering. Butyryl chitin (BC) is a derivative of chitin (CT) with improved solubility. It has good biocompatibility, but few studies have investigated its use in bone repair. In this study, BC was successfully synthesized with a degree of substitution of 2.1. BC films were prepared using the cast film method and showed strong tensile strength (47.8 ± 4.54 N) and hydrophobicity (86.4 ± 2.46°), which was favorable for mineral deposition. An in vitro cytological assay confirmed the excellent cell attachment and cytocompatibility of the BC film; meanwhile, in vivo degradation indicated the good biocompatibility of BC. Hydroxyapatite (HA), extracted from bovine cancellous bone, had good cytocompatibility and osteogenic induction activity for the mouse osteoblast cell line MC3T3-E1. With the aim of combining the advantages of BC and HA, a BC-HA composite scaffold, with a good pore structure and mechanical strength, was prepared by physical mixing. Administered into skull defects of rats, the scaffolds showed perfect bone-binding performance and effective structural support, and significantly promoted the regeneration of new bone. These results prove that the BC-HA porous scaffold is a successful bone tissue engineering scaffold and has strong potential to be further developed as a substitute for bone transplantation.

Preparation of High Mechanical Strength Chitosan Nanofiber/NanoSiO2/PVA Composite Scaffolds for Bone Tissue Engineering Using Sol-Gel Method

The majority of chitosan-based bone tissue engineering (BTE) scaffolds have the problem of poor mechanical properties. However, modifying chitosan with conventional silane coupling agents to improve the mechanical properties of scaffolds will introduce additional complications, including cytotoxicity and poor biocompatibility. In this study, two types of organic−inorganic composite scaffolds (F-A-T0/T3/T5 and F-B-T5-P0/P0.5/P1.5/P2.5) were prepared using chitosan nanofibers (CSNF) prepared by the beating-homogenization method, combined with the sol−gel method, and further introduced polyvinyl alcohol (PVA). The F-A-T3 and F-B-T5-P1.5 exhibited interconnected pore and surface nanofibers structures, high porosity (>70%), outstanding swelling properties, and a controllable degradation rate. The Young’s modulus of TEOS: 5.0% (w/w), PVA: 1.5% (w/w) chitosan fiber scaffold is 8.53 ± 0.43 MPa in dry conditions, and 237.78 ± 8.86 kPa in wet conditions, which is four times that of F-A-T5 and twice that of F-B-T5-P0. Additionally, cell (MC3T3-E1) experiments confirmed that the two composite scaffolds had great cytocompatibility and were predicted to be used in the future in the field of BTE scaffolds.

Determination of Carbohydrate Composition in Mealworm (Tenebrio molitor L.) Larvae and Characterization of Mealworm Chitin and Chitosan

Mealworm (Tenebrio molitor L.) is a classic edible insect with high nutritional value for substituting meats from vertebrates. While interest in mealworms has increased, the determination of carbohydrate constituents of mealworms has been overlooked. Thus, the aim of the present study was to investigate the carbohydrate content and composition of mealworms. In addition, the characteristics of mealworm chitin were determined as these were the major components of mealworm carbohydrate. The crude carbohydrate content of mealworms was 11.5%, but the total soluble sugar content was only 30% of the total carbohydrate content, and fructose was identified as the most abundant free sugar in mealworms. Chitin derivatives were the key components of mealworm carbohydrate with a yield of 4.7%. In the scanning electron microscopy images, a lamellar structure with α-chitin configuration was observed, and mealworm chitosan showed multiple pores on its surface. The overall physical characteristics of mealworm chitin and chitosan were similar to those of the commercial products derived from crustaceans. However, mealworm chitin showed a significantly softer texture than crustacean chitin with superior anti-inflammatory effects. Hence, mealworm chitin and chitosan could be employed as novel resources with unique advantages in industries.

A Cost-Effective Nano-Sized Curcumin Delivery System with High Drug Loading Capacity Prepared via Flash Nanoprecipitation

Flash nanoprecipitation (FNP) is an efficient technique for encapsulating drugs in particulate carriers assembled by amphiphilic polymers. In this study, a novel nanoparticular system of a model drug curcumin (CUR) based on FNP technique was developed by using cheap and commercially available amphiphilic poly(vinyl pyrrolidone) (PVP) as stabilizer and natural polymer chitosan (CS) as trapping agent. Using this strategy, high encapsulation efficiency (EE > 95%) and drug loading capacity (DLC > 40%) of CUR were achieved. The resulting CUR-loaded nanoparticles (NPs) showed a long-term stability (at least 2 months) and pH-responsive release behavior. This work offers a new strategy to prepare cost-effective drug-loaded NPs with high drug loading capacity and opens a unique opportunity for industrial scale-up.

Pacific white shrimp (Litopenaeus vannamei) shell chitosan and the conjugate with epigallocatechin gallate: Antioxidative and antimicrobial activities

Chitin was isolated from Pacific white shrimp (Litopenaeus vannamei) shell by demineralization and deproteinization using 1 M HCl (1:20, w/v) for 2 hr and 1 M NaOH (1:30 w/v) for 80 min at 70ºC, respectively, with 29.96% optimum yield. Thereafter, the chitin was deacetylated at various temperatures for different times, in which the chitosan prepared at 130ºC for 4 hr (CS-130-4) showed higher yield (73.11%), crystallinity index (19.75%), and 85.28% degree of deacetylation (DDA) as measured by ¹ H-NMR. CS-130-4 was then conjugated to epigallocatechin gallate (EGCG) at various concentrations (2-8%, w/w of chitosan). CS-130-4 was grafted with 8% EGCG (CE-8) had the higher conjugation efficiency (92.63%) and antimicrobial/antioxidant activities as compared to other conjugates (p < .05). ¹ H-NMR analysis also confirmed the successful conjugation of CE-8. All the conjugates were completely water soluble. Therefore, CE-8 may be used as the natural antimicrobial and antioxidant agents in various food products. PRACTICAL APPLICATIONS: Shrimp shells are generally considered as processing by-products of the shellfish industries and can cause environmental pollution when improperly disposed. Chitosan from shrimp shells has been widely produced but it is soluble mainly in acidic solutions, which limits its applications. However, grafting of epigallocatechin gallate (EGCG) onto chitosan yielded water-soluble conjugates with enhanced antioxidant and antimicrobial properties. Although several preservatives have been applied in foods, their health hazards have been a major concern. To mitigate this limitation, chitosan-EGCG conjugates could be employed as alternative natural preservatives or additives for shelf-life extension of various foods.

Sulfone-modified chitosan as selective adsorbent for the extraction of toxic Hg(II) metal ions

In this study, a new category of sulfone-modified chitosan derivatives as surface-selective adsorbents for the extraction of toxic Hg(II) metal has been synthesized in good yield. Sulfone-modified chitosan/5–20 based on variable loading of the corresponding phenacyl bromide (5, 10, 15, and 20% with respect to the original weight of the pure chitosan) was synthesized. The β-ketosulfone derivative, namely 1–(4-bromophenyl)-2-(phenylsulfonyl)ethanone, was first prepared by treatment of the corresponding phenacyl bromide with a sufficient amount of sodium benzene sulfinate; its chemical structure was confirmed by spectral analyses, including Fourier transform infrared spectroscopy, 1H-NMR, 13C-NMR, and mass spectrometry. Then, sulfone-modified chitosan/5–20 derivatives were synthesized by the interaction of chitosan with a freshly prepared p-bromo-β-ketosulfone derivative in a mildly acidic aqueous solution using the solution-blending technique. Sulfone-modified chitosan/5–20 derivatives were identified and characterized using common characterization techniques, including Fourier transform infrared spectroscopy, field-emission scanning electron microscope, powder X-ray diffraction, and thermal behaviour. A strong interaction was displayed between chitosan and its corresponding β-ketosulfones in powder X-ray diffraction, which was confirmed by significant 2θ shifts. Sulfone-modified chitosan/5–20 derivatives were detected as catalysts, which efficiently increased the thermal decomposition of pure chitosan. More particularly, the efficiency of sulfone-modified chitosan/5–20 derivatives for Hg(II), Pb(II), Ni(II), Al(III), Sr(II), Cr(III), Fe(III), Zn(II), and Mn(II) detection and adsorption was also investigated using inductively coupled plasma optical emission spectrometry. The sulfone-modified chitosan/5 derivative exhibited the highest adsorption efficiency. The most effective quantitative adsorption onto the sulfone-modified chitosan/5 surface was detected at pH = 2. In addition to that, the adsorption isotherm showed that the adsorption capacity of sulfone-modified chitosan/5 for Hg(II) was 122.47 mg g−1 and that its adsorption isotherm was in agreement with the Langmuir adsorption isotherm.

Fabrication of magnetic and fluorescent chitin and dibutyrylchitin sub-micron particles by oil-in-water emulsification

Chitin is a carbohydrate polymer with unique pharmacological and immunological properties, however, because of its unwieldy chemistry, the synthesis of discreet sized sub-micron particles has not been well reported. This work describes a facile and flexible method to fabricate biocompatible chitin and dibutyrylchitin sub-micron particles. This technique is based on an oil-in-water emulsification/evaporation method and involves the hydrophobization of chitin by the addition of labile butyryl groups onto chitin, disrupting intermolecular hydrogen bonds and enabling solubility in the organic solvent used as the oil phase during fabrication. The subsequent removal of butyryl groups post-fabrication through alkaline saponification regenerates native chitin while keeping particles morphology intact. Examples of encapsulation of hydrophobic dyes and nanocrystals are demonstrated, specifically using iron oxide nanocrystals and coumarin 6. The prepared particles had diameters between 300-400nm for dibutyrylchitin and 500-600nm for chitin and were highly cytocompatible. Moreover, they were able to encapsulate high amounts of iron oxide nanocrystals and were able to label mammalian cells.

STATEMENT OF SIGNIFICANCE

We describe a technique to prepare sub-micron particles of highly acetylated chitin (>90%) and dibutyrylchitin and demonstrate their utility as carriers for imaging. Chitin is a polysaccharide capable of stimulating the immune system, a property that depends on the acetamide groups, but its insolubility limits its use. No method for sub-micron particle preparation with highly acetylated chitins have been published. The only approach for the preparation of sub-micron particles uses low acetylation chitins. Dibutyrylchitin, a soluble chitin derivative, was used to prepare particles by oil in water emulsification. Butyryl groups were then removed, forming chitin particles. These particles could be suitable for encapsulation of hydrophobic payloads for drug delivery and cell imaging, as well as, adjuvants for vaccines.

Mechanochemical synthesis of chitosan submicron particles from the gladius of Todarodes pacificus

The present work focused on the synthesis of β-chitosan submicron particles (CSPs) from Todarodes pacificus using mechanochemical techniques. The gladius was submitted to a sequence of mechanical and chemical treatments to synthesize β-chitin (CT), which was further deacetylated to form spherical chitosan submicron particles with an average diameter of ⩽100 nm. The surface morphology of β-chitin and CSPs was observed using electron microscopy. The degree of deacetylation (DD%), evaluated from the absorbance peak of a Fourier Transform Infrared (FTIR) spectrum, was 80 ± 2.5%. Physicochemical characterization exhibited good crystallinity, positive zeta potential and low molecular weight, as well as reduced ash content and high water-binding capacity. CSPs exhibit significant antimicrobial properties toward all tested pathogenic bacterial and fungal microorganisms. Antioxidant analysis revealed high reducing power and excellent scavenging and chelating ability. Hence, CSPs synthesized from gladius of Todarodes pacificus using mechanochemical techniques are promising candidates for biomedical applications.

Emerging biomedical applications of nano-chitins and nano-chitosans obtained via advanced eco-friendly technologies from marine resources

The present review article is intended to direct attention to the technological advances made in the 2010-2014 quinquennium for the isolation and manufacture of nanofibrillar chitin and chitosan. Otherwise called nanocrystals or whiskers, n-chitin and n-chitosan are obtained either by mechanical chitin disassembly and fibrillation optionally assisted by sonication, or by e-spinning of solutions of polysaccharides often accompanied by poly(ethylene oxide) or poly(caprolactone). The biomedical areas where n-chitin may find applications include hemostasis and wound healing, regeneration of tissues such as joints and bones, cell culture, antimicrobial agents, and dermal protection. The biomedical applications of n-chitosan include epithelial tissue regeneration, bone and dental tissue regeneration, as well as protection against bacteria, fungi and viruses. It has been found that the nano size enhances the performances of chitins and chitosans in all cases considered, with no exceptions. Biotechnological approaches will boost the applications of the said safe, eco-friendly and benign nanomaterials not only in these fields, but also for biosensors and in targeted drug delivery areas.

Proteomic analysis of enzyme production by Bacillus licheniformis using different feather wastes as the sole fermentation media

This study evaluates the use of different types of feathers as fermentation media for enzyme production. Bacillus licheniformis was grown on the feathers, which lead to total biodegradation due to bacterial enzymatic hydrolytic excretion. B. licheniformis excretes protease and lipase activity, with feather concentration being the main parameter controlling their generation. Using a proteomic approach, the proteins excreted during fermentation were identified, and the influence of the chemical composition of the feathers on protein secretion was tested. The identified proteins are hydrolytic enzymes such as keratinase, gamma-glutamyltranspeptidase, chitosanases, and glicosidases. The diversity of proteins is related to the chemical complexity of the feathers. Understanding the composition of a hydrolytic system, when B. licheniformis is cultured on different feathers, may assist in utilizing such a system for producing different hydrolytic enzymes. The data indicate that proteomics can be a valuable tool for describing the physiological state of B. licheniformis cell populations growing on different wastes.

Application of spectroscopic methods for structural analysis of chitin and chitosan

Chitin, the second most important natural polymer in the world, and its N-deacetylated derivative chitosan, have been identified as versatile biopolymers for a broad range of applications in medicine, agriculture and the food industry. Two of the main reasons for this are firstly the unique chemical, physicochemical and biological properties of chitin and chitosan, and secondly the unlimited supply of raw materials for their production. These polymers exhibit widely differing physicochemical properties depending on the chitin source and the conditions of chitosan production. The presence of reactive functional groups as well as the polysaccharide nature of these biopolymers enables them to undergo diverse chemical modifications. A complete chemical and physicochemical characterization of chitin, chitosan and their derivatives is not possible without using spectroscopic techniques. This review focuses on the application of spectroscopic methods for the structural analysis of these compounds.

Effects of nonwoven mats of Di-O-butyrylchitin and related polymers on the process of wound healing

The aim of the study was to observe the effects of dibutyrylchitin (DBC) on the repair processes and to explain the mechanisms of its action in comparison with other dressing materials made of butyrylchitin (BC), regenerated chitin (RC), and chitosan. The results showed that DBC implanted subcutaneously to the rats increased weight of the granulation tissue. Increased cell number isolated from the wound and cultured on the DBC films was also revealed. The DBC was proved to reduce also the necrotic cells number in the culture. DBC elevates the glycosaminoglycans (GAG) level in the granulation tissue. The total collagen content in the wound was not influenced by all applied dressing materials. However, a low level of the poorly polymerized soluble collagen in the wounds treated with DBC and BC indicated better polymerization of the remaining part of that protein. Both DBC and chitosan increased the weight of granulation tissue. However, chitosan contrary to DBC lowered GAG content and increased water capacity in the wound. The study documents the beneficial influence of DBC on the repair, which could be explained by the modification of the extracellular matrix and cells number. The best effects were observed after application of DBC with [eta] DBC-1 = 1.75 dL/g.

First evidence of chitin as a component of the skeletal fibers of marine sponges. Part I. Verongidae (demospongia: Porifera)

The Porifera (sponges) are often regarded as the oldest, extant metazoan phylum, also bearing the ancestral stage for most features occurring in higher animals. The absence of chitin in sponges, except for the wall of peculiar resistance bodies produced by a highly derived fresh-water group, is puzzling, since it points out chitin to be an autapomorphy for a particular sponge family rather than the ancestral condition within the metazoan lineage. By investigating the internal proteinaceous (spongin) skeleton of two demosponges (Aplysina sp. and Verongula gigantea) using a wide array of techniques (Fourier transform infrared (FTIR), Raman, X-ray, Calcofluor White Staining, Immunolabeling, and chitinase test), we show that chitin is a component of the outermost layer (cuticle) of the skeletal fibers of these demosponges. FTIR and Raman spectra, as well as X-ray difractograms consistently revealed that sponge chitin is much closer to the alpha-chitin known from other animals than to beta-chitin. These findings support the view that the occurrence of a chitin-producing system is the ancestral condition in Metazoa, and that the alpha-chitin is the primitive form in animals.

The biocompatibility of dibutyryl chitin in the context of wound dressings

Dibutyryl chitin (DBC) is a modified chitin carrying butyryl groups at 3 and 6 positions; its peculiarity is that it dissolves promptly in common solvents, while being insoluble in aqueous systems. The high biocompatibility of dibutyryl chitin in the form of films and non-wovens has been demonstrated for human, chick and mouse fibroblasts by the Viability/Cytotoxicity assay, In situ Cell Proliferation assay, Neutral Red Retention assay, Lactate Dehydrogenase Release assay, MTS cytotoxicity assay, and scanning electron microscopy. DBC was hardly degradable by lysozyme, amylase, collagenase, pectinase and cellulase over the observation period of 48 days at room temperature, during which no more than 1.33% by weight of the DBC filaments (0.3 mm diameter) was released to the aqueous medium. DBC non-wovens were incorporated into 5-methylpyrrolidinone chitosan solution and submitted to freeze-drying to produce a reinforced wound dressing material. The latter was tested in vivo in full thickness wounds in rats. The insertion of 4x4 mm pieces did not promote any adverse effect on the healing process, as shown histologically. DBC is therefore suitable for contacting intact and wounded human tissues.