Synthesis, characterization and swelling studies of pH responsive psyllium and methacrylamide based hydrogels for the use in colon specific drug delivery

A novel pH-responsive hydrogel system based on Prunus armeniaca gum and acrylic acid: Preparation and evaluation as a potential candidate for controlled drug delivery

pH-responsive hydrogels have become effective and attractive materials for the controlled release of drugs at pre-determined destinations. In the present study, a novel hydrogel system based on Prunus armeniaca gum (PAG) and acrylic acid (AA) was prepared by a free radical mechanism using N, N-methylene bisacrylamide (MBA) as cross-linker and potassium persulfate (KPS) as initiator. A series of hydrogels varying PAG, AA, and MBA concentration was developed to determine the impact of these components. Formulated hydrogels were characterized for pH-responsive swelling, drug release, gel content, and porosity. Structural analysis was performed by FTIR, XRD, and SEM analysis. TGA study was applied to assess thermal stability. Oral acute toxicity and in vivo drug release were performed in rabbits. Hydrogels exhibited pH-dependent swelling and drug release. Swelling, drug loading and release, and porosity increased by increasing PAG and AA concentration while decreased by increasing MBA. The gel content of formulations was increased by increasing all three components. FTIR studies confirmed the development of copolymeric networks and the loading of drug. XRD studies revealed that hydrogels were amorphous, and the crystalline drug was changed into an amorphous form during loading. TGA results indicated that hydrogels were stable up to 600 °C. Acute oral toxicity results confirm that hydrogels were nontoxic up to a dose of 2 g/kg body weight in rabbits. The pharmacokinetic evaluation revealed that hydrogels prolonged the availability of the drug and the peak plasma concentration of the drug was obtained in 6 h as compared to the oral solution of the drug. Tramadol hydrochloride (THC) was used as a model drug. Hence, pH-responsive swelling and release, nontoxic nature and improved pharmacokinetics support that PAG-based hydrogels may be considered as potential controlled-release polymeric carriers.

Mucoadhesive microspheres of glutaraldehyde crosslinked mucilage of Isabgol husk for sustained release of gliclazide

Mucoadhesive microspheres have their own significant amongst the various sustained release drug delivery systems. The prolonged residence time of these delivery devices at drug absorption site results in steep concentration gradient and enhanced bioavailability. In this study, the mucilage of Isabgol husk was applied as polymeric backbone to develop gliclazide loaded microspheres by crosslinking with glutaraldehyde. The formulations were studied for surface morphology, swelling behavior, particle size, in vitro release, release kinetics, in vitro mucoadhesion and gamma scintigraphy in rabbits. The release of gliclazide from microspheres was controlled by swelling of crosslinked microspheres followed by diffusion. Gamma scintigraphic images acquired for microspheres retention in gastrointestinal track of rabbits indicated the residence of formulation upto 24 h after oral administration. Gliclazide retained its integrity in polymeric matrix of microspheres as observed by Fourier transform infrared spectroscopy, differential scanning calorimetry and powder X-ray diffractometry. The sustained release of gliclazide and prolonged retention of microspheres in gastrointestinal track disclosed the rationality of mucoadhesive Isabgol husk microspheres in controlling the hyperglycemia in diabetes.

Hydrogels as potential drug-delivery systems: network design and applications

Hydrogels are 3D crosslinked polymer matrices having a colossal tendency to imbibe water and exhibit swelling under physiological conditions without deformation in their hydrophilic network. Hydrogels being biodegradable and biocompatible, gained consideration due to some unique characteristics: responsiveness to external stimuli (pH, temperature) and swelling in aqueous solutions. Hydrogels offer a promising option for various pharmaceutical and biomedical applications, including tissue-specific drug delivery at a predetermined, controlled rate. This article presents a brief review of the recent and fundamental advances to design hydrogels, the swelling and deswelling mechanism, various crosslinking methods and their use as an intelligent carrier in the pharmaceutical field. Recent applications of hydrogels are also briefly discussed and exemplified.

Localized delivery of active targeting micelles from nanofibers patch for effective breast cancer therapy

Nanofibers based transdermal drug delivery is a promising platform, and it effectively delivers the drug to tumor sites. The objective of the study was to fabricate stimuli-responsive polymeric nanofibers encapsulated with an active targeting micellar system for in situ drug delivery. Stimuli-responsive core-shell nanofibers release thedrug at target sites with minimum side effects to the other organs, decrease the drug administration concentration. Initially, we prepared CA conjugated PCPP polymeric micelles loaded with PTX. Then, core-shell nanofibers were prepared using PHM with coaxial electrospinning and distinct core-shell nanofibers formation confirm by SEM and TEM. Nanofibers showed a homogenous distribution of micelles inside the fiber mesh, diffusion, and erosion processes lead to a controlled release of PTX.In vitro drug release and swelling, revealed the pH based sustained release of the drug for 180 h from the nanofibers mat. Functional and stimuli-responsive nanofibers highly absorb H⁺ ions and repulsion of cations promoting maximum swelling to release more drugs in acidic pH. An increased transportation rate of 70% drug release through epidermis for 120 h. Nanofibers effectively internalize to the skin, and it confirmed by confocal microscopy. MCF-7 cells grown and spread over the nanofibers, which show the biocompatibility of nanofibers. Compared to PTX, drug-loaded nanofibers exhibited higher cytotoxicity for 8 days which was confirmed by the flow cytometry. These promising results confirm, the novel stimuli-responsive core-shell nanofibers actively target breast cancer cells and lead the way to safe cancer therapy.

Polyacrylamide-Metilcellulose Hydrogels Containing Aloe barbadensis Extract as Dressing for Treatment of Chronic Cutaneous Skin Lesions

Chronic wounds are severe breaks in the skin barrier that fail to heal in an acceptable time-frame, thus preventing the complete restoration of the tissue’s anatomical and functional integrity, increasing the likelihood of infections and apoptosis. Hydrogels are known as a drug delivery system and have the potential to cover wounds and burns on the skin. Aloe barbadensis contains over 75 different bioactive compounds which are responsible for its anti-inflammatory and antimicrobial properties. In this study, the polyacrylamide-co-methylcellulose hydrogel containing Aloe barbadensis were developed. The extract was prepared from lyophilized Aloe barbadensis, using methanolic extraction, characterized by high performance liquid chromatography and incorporated into the hydrogels. These Aloe barbadensis hydrogels were characterized by degree of swelling, Fourier-transform infrared spectroscopy, scanning electron microscopy, and thermal profiling using thermogravimetric analysis. The minimum inhibitory concentration test was done on the Aloe barbadensis extract to evaluate its antibacterial and antifungal activity in vitro. The Aloe barbadensis hydrogels and were shown to swell to almost 2000% of their original sizes. The Fourier-transform infrared spectroscopy indicated the presence of bands characteristic of Aloe barbadensis and hydrogel polymers. The basic hydrogel showed greater thermal stability than the hydrogels with Aloe barbadensis. The minimum inhibitory concentration showed inhibition of the growth of S. aureus and Salmonella spp. at specific concentrations. The hydrogel therefore presents itself as an excellent potential curative cover of cutaneous lesions.

Natural and synthetic polymer-based smart biomaterials for management of ulcerative colitis: a review of recent developments and future prospects

Ulcerative colitis (UC) is an inflammatory disease of the colon that severely affects the quality of life of patients and usually responds well to anti-inflammatory agents for symptomatic relief; however, many patients need colectomy, a surgical procedure to remove whole or part of the colon. Though various types of pharmacological agents have been employed for the management of UC, the lack of effectiveness is usually predisposed to various reasons including lack of target-specific delivery of drugs and insufficient drug accumulation at the target site. To overcome these glitches, many researchers have designed and characterized various types of versatile polymeric biomaterials to achieve target-specific delivery of drugs via oral route to optimize their targeting efficiency to the colon, to improve drug accumulation at the target site, as well as to ameliorate off-target effects of chemotherapy. Therefore, the aim of this review was to summarize and critically discuss the pharmaceutical significance and therapeutic feasibility of a wide range of natural and synthetic biomaterials for efficient drug targeting to colon and rationalized treatment of UC. Among various types of biomaterials, natural and synthetic polymer-based hydrogels have shown promising targeting potential due to their innate pH responsiveness, sustained and controlled release characteristics, and microbial degradation in the colon to release the encapsulated drug moieties. These characteristic features make natural and synthetic polymer-based hydrogels superior to conventional pharmacological strategies for the management of UC.

Heparin binding chitosan derivatives for production of pro-angiogenic hydrogels for promoting tissue healing

Our aim was to develop a biocompatible hydrogel that could be soaked in heparin and placed on wound beds to improve the vasculature of poorly vascularized wound beds. In the current study, a methodology was developed for the synthesis of a new chitosan derivative (CSD-1). Hydrogels were synthesized by blending CSD-1 for either 4 or 24h with polyvinyl alcohol (PVA). The physical/chemical interactions and the presence of specific functional groups were confirmed by Fourier transform infrared (FT-IR) spectroscopy and proton nuclear magnetic resonance (¹H NMR). The porous nature of the hydrogels was confirmed by scanning electron microscopy (SEM). Thermal gravimetric analysis (TGA) showed that these hydrogels have good thermal stability which was slightly increased as the blending time was increased. Hydrogels produced with 24h of blending supported cell attachment more and could be loaded with heparin to induce new blood vessel formation in a chick chorionic allantoic membrane assay.

Macro- and Micronutrient Simultaneous Slow Release from Highly Swellable Nanocomposite Hydrogels

Clay-loaded hydrogels have been arousing great interest from researchers and academics due to their unique properties and broad applicability range. Here we developed hydrogel-based nanocomposites intended for slow/controlled release of macro- and micronutrients into independent or concurrent systems. The produced nanocomposites underwent a hydrolysis treatment that improved their physicochemical properties. We obtained materials capable of absorbing water contents 5000 times greater than their weights, an outcome that makes them promising, particularly if compared with commercially available materials. Though swelling degree was affected by the presence of calcium montmorillonite (MMt), MMt has increased nutrient (urea and boron) loading capacity and, as a consequence of its interaction with the studied nutrients, has led to a slower release behavior. By evaluating the simultaneous release behavior, we observed that both the ionic (sodium octaborate) and the nonionic (urea) sources competed for the same active sites within the nanocomposites as suggested by the decreased loading and release values of both nutrients when administrated simultaneously. Because of its great swelling degree, higher than 2000 times in water, the nanocomposites formulated with high MMt contents (approximately 50.0% wt) as well as featuring high loading capacity and individual (approximately 74.2 g of urea g(-1) of nanocomposite and 7.29 g of boron g(-1) of nanocomposite) and simultaneous release denote interesting materials for agricultural applications (e.g., carriers for nutrient release).

Dextrin and poly(acrylic acid)-based biodegradable, non-cytotoxic, chemically cross-linked hydrogel for sustained release of ornidazole and ciprofloxacin

Herein, novel biodegradable, stimulus-responsive, chemically cross-linked and porous hydrogel has been synthesized to evaluate its applicability as an efficient carrier for sustained release of ornidazole and ciprofloxacin. The cross-linked hydrogel (c-Dxt/pAA) has been developed from dextrin and poly(acrylic acid) using N,N'-methylene bis(acrylamide) cross-linker via Michael-type addition reaction. With the variation of reaction parameters, various c-Dxt/pAA hydrogels have been synthesized to optimize the best one. c-Dxt/pAA hydrogel has been characterized using various physicochemical characterization techniques. The hydrogel demonstrates significant pH and temperature sensitivity. Gel characteristics and gel kinetics have been performed through the measurement of rheological parameters. The hydrogel shows noncytotoxic behavior toward human mesenchymal stem cells. Biodegradation study predicts that c-Dxt/pAA is degradable in nature. The in vitro release of ornidazole and ciprofloxacin suggests that the hydrogel released both the drugs in a controlled manner with extensive stability up to 3 months. The results suggest that c-Dxt/pAA is probably a promising candidate for controlled release of ornidazole and ciprofloxacin.

Development and application of a nanocomposite derived from crosslinked HPMC and Au nanoparticles for colon targeted drug delivery

Herein, we report a novel route for the synthesis of poly(acrylamide) (PAAm) crosslinked hydroxypropyl methyl cellulose/Au nanocomposite where chemically crosslinked HPMC (c-HPMC) works as a reducing agent.

Rheological Characterization of Isabgol Husk, Gum Katira Hydrocolloids, and Their Blends

The rheological parameters of Isabgol husk, gum katira, and their blends were determined in different media such as distilled water, 0.1 N HCl, and phosphate buffer (pH 7.4). The blend properties of Isabgol husk and gum katira were measured for four different percentage compositions in order to understand their compatibility in dispersion form such as 00 : 100, 25 : 50, 50 : 50, 75 : 25, and 100 : 00 in the gel strength of 1 mass%. The miscibility of blends was determined by calculating Isabgol husk-gum katira interaction parameters by Krigbaum and Wall equation. Other rheological properties were analyzed by Bingham, Power, Casson, Casson chocolate, and IPC paste analysis. The study revealed that the power flow index "p" was less than "1" in all concentrations of Isabgol husk, gum katira, and their blends dispersions indicating the shear-thinning (pseudoplastic) behavior. All blends followed pseudoplastic behavior at thermal conditions as 298.15, 313.15, and 333.15°K and in dispersion media such as distilled water, 0.1 N HCl, and phosphate buffer (pH 7.4). Moreover, the study indicated the applicability of these blends in the development of drug delivery systems and in industries, for example, ice-cream, paste, nutraceutical, and so forth.

Dextrin/poly (HEMA): pH responsive porous hydrogel for controlled release of ciprofloxacin

Herein, we report an oral route administration for ciprofloxacin hydrochloride delivery using dextrin and poly (2-hydroxyethyl methylacrylate) based crosslinked hydrogel (c-Dxt/pHEMA). Various characteristics such as FTIR spectra, XRD analyses, UV-VIS-NIR spectra, FESEM and E-SEM analyses, rheological characteristics, gel kinetics, deswelling characteristics as well as biodegradation study of the hydrogel have been carried out. FTIR, XRD along with solid state UV-VIS-NIR analyses explain the good compatibility between the drug and the hydrogel matrix. The in vitro release study demonstrates that c-Dxt/pHEMA releases ciprofloxacin in a sustained way (33.75% of drug has been released in 18h) and is expected to be a promising matrix for ciprofloxacin carrier. The release kinetics and mechanism suggest that drug release follows first order kinetics and non-Fickian diffusion mechanism. Finally, the hydrogel shows excellent physical stability as carrier for ciprofloxacin up to 3 months.

Study of Swelling Properties and Thermal Behavior of Poly(N,N-Dimethylacrylamide-co-Maleic Acid) Based Hydrogels

Hydrogels copolymers N,N-dimethylacrylamide (DMA) and maleic acid (MA) were prepared by free-radical polymerization at 56°C in aqueous solution, using N,N-methylenebisacrylamide (NMBA) as cross-linking agent and potassium persulfate (KPS) as initiator. The effects of comonomer composition, cross-linker content, and variation of pH solutions on the swelling behavior of polymers were investigated. The obtained results showed an increase of the swelling of poly(N,N-dimethylacrylamide-co-maleic acid) (P(DMA-MAx)) as the content of maleic acid increases in the polymeric matrix, while they indicate a great reduction of the degree of swelling as the cross-linking agent ratio increases. It was also shown that the swelling of copolymer hydrogels increased with the increase of pH and the maximum extent was reached at pH 8.7 in all compositions. Fourier transform infrared spectroscopy (FTIR) revealed the existence of hydrogen bonding interactions between the carboxylic groups of MA and the carbonyl groups of DMA. Differential scanning calorimetry analysis (DSC) showed an increase of the glass-transition temperature (Tg) as concentrations of MA and NMBA increased. Thermogravimetric analysis (TGA) of copolymers was performed to investigate the degradation mechanism.

Thiol modification of psyllium husk mucilage and evaluation of its mucoadhesive applications

Thiol functionalization of psyllium was carried out to enhance its mucoadhesive potential. Thiolation of psyllium was achieved by esterification with thioglycolic acid. Thiolation was observed to change the surface morphology of psyllium from fibrous to granular and result in a slight increase in the crystallinity and swelling. Thiolated psyllium was found to contain 3.282 m moles of thiol groups/g of the polymer. Mucoadhesive applications of thiolated psylium were explored by formulating gels using metronidazole as the model drug. On comparative evaluation thiolated psyllium gels showed 3-fold higher mucoadhesive strength than the psyllium gels as determined by modified physical balance using chicken buccal pouch. The results of in vitro release study revealed that thiolated psyllium gels provided a prolonged release of metronidazole. Further, the psyllium and thiolated psyllium gels were found to release the drug following first-order kinetics by combination of polymer relaxation and diffusion through the matrix.

Nanocomposite PAAm/methyl cellulose/montmorillonite hydrogel: evidence of synergistic effects for the slow release of fertilizers

In this work, we synthesized a novel series of hydrogels composed of polyacrylamide (PAAm), methylcellulose (MC), and calcic montmorillonite (MMt) appropriate for the controlled release of fertilizers, where the components presented a synergistic effect, giving very high fertilizer loading in their structure. The synthesized hydrogel was characterized in relation to morphological, hydrophilic, spectroscopic, structural, thermal, and kinetic properties. After those characterizations, the application potential was verified through sorption and desorption studies of a nitrogenated fertilizer, urea (CO(NH2)2). The swelling degree results showed that the clay loading considerably reduces the water absorption capability; however, the hydrolysis process favored the urea adsorption in the hydrogel nanocomposites, increasing the load content according to the increase of the clay mass. The FTIR spectra indicated that there was incorporation of the clay with the polymeric matrix of the hydrogel and that incorporation increased the water absorption speed (indicated by the kinetic constant k). By an X-ray diffraction technique, good nanodispersion (intercalation) and exfoliation of the clay platelets in the hydrogel matrix were observed. Furthermore, the presence of the montmorillonite in the hydrogel caused the system to liberate the nutrient in a more controlled manner than that with the neat hydrogel in different pH ranges. In conclusion, excellent results were obtained for the controlled desorption of urea, highlighting the hydrolyzed hydrogels containing 50% calcic montmorillonite. This system presented the best desorption results, releasing larger amounts of nutrient and almost 200 times slower than pure urea, i.e., without hydrogel. The total values of nutrients present in the system show that this material is potentially viable for application in agriculture as a nutrient carrier vehicle.

Mechanism of interactions between calcium and viscous polysaccharide from the seeds of Plantago asiatica L

The present study aimed at investigating the mechanism of interactions between calcium and the psyllium polysaccharide. Plantago asiatica L. crude polysaccharide (PLCP) was subjected to ethylenediaminetetraacetic acid (EDTA) to yield calcium-depleted polysaccharide named PLCP-E. There was essentially no difference in the structure between PLCP-E and PLCP. However, PLCP-E exhibited a much lower apparent viscosity compared to that of PLCP. PLCP was treated with sodium hydroxide to deplete ferulic acid. The resultant material was named PLCP-FAS, which also exhibited lower viscosity. Adding Ca(2+) could both increase apparent viscosity of PLCP-E and PLCP-FAS, but only PLCP-E could keep the high viscosity when dialysis was carried out to remove free Ca(2+) in the solution. Thermal analysis showed that the thermal stability of the polysaccharide was reduced after EDTA chelation. Scanning electron microscopy (SEM) analysis showed that PLCP-E was flaky and curly aggregation, while PLCP was mostly filamentous in appearance. The results suggested that there are strong interactions between Ca(2+) and the polysaccharide. The interactions contributed to the high viscosity, weak gelling property, and thermal stability of the polysaccharide.

Investigação do processo de absorção de água de hidrogéis de polissacarídeo: efeito da carga iônica, presença de sais, concentrações de monômero e polissacarídeo

Neste trabalho foi reportada a caracterização de hidrogéis constituídos por metilcelulose (MC) e poliacrilamida (PAAm) preparados pelo processo de reticulação cruzada. As propriedades espectroscópicas e morfológicas foram investigadas por espectroscopia no infravermelho com transformada de Fourier e microscopia eletrônica de varredura, respectivamente. O efeito da carga iônica, presença de sais, concentrações de monômero AAm e polissacarídeo MC na absorção de água e nas propriedades cinéticas dos hidrogéis foi detalhadamente investigado. Os resultados indicaram que o decréscimo da concentração de MC ou aumento da concentração de AAm, carga iônica do contra-íon do sal de cloreto e a presença de fertilizante no meio externo de intumescimento provocaram diminuição significativa na absorção de água dos hidrogéis. O mecanismo de absorção de água dos hidrogéis de PAAm-MC em água seguiu o modelo de difusão Fickiana; já o mecanismo dos hidrogéis intumescidos em sais (cloreto ou fertilizante) seguiu o modelo de transporte anômalo. Pela alta e rápida absorção de água, as matrizes porosas e tridimensionais compostas por PAAm e MC podem em potencial ser aplicadas na agricultura como veículos carreadores.

Strategies of targeting oral drug delivery systems to the colon and their potential use for the treatment of colorectal cancer

Colorectal cancer (CRC) is the third most common cause of cancer-related death in both men and women. Often, surgical intervention remains the choice in treating CRC. Traditional dosage forms used for treating CRC deliver drug to wanted as well as unwanted sites of drug action resulting in several adverse side effects. Targeted oral drug delivery systems are being investigated to target and deliver chemotherapeutic and chemopreventive agents directly to colon and rectum. Site-specific delivery of a drug to colon increases its concentration at the target site, and thus requires a lower dose with reduced incidence of side effects. The major obstacle to be overcome for successful targeting of drug to colon through oral route is that drug absorption/degradation must be avoided in stomach and small intestine before the dosage form reaches colon. The review includes discussion of physiological factors that must be considered when targeting drugs directly to colorectal region, an outline on drugs used for treatment and prevention of CRC, and a brief description of various types of colon-targeted oral drug delivery systems. The focus is on the assessment of various formulation approaches being investigated for oral colon-specific delivery of drugs used in the treatment and prevention of CRC.

Hidrogéis semi-IPN baseados em rede de alginato-Ca2+ com PNIPAAm entrelaçado: propriedades hidrofílicas, morfológicas e mecânicas

Neste trabalho, a termossensibilidade dos hidrogéis do tipo semi-IPN baseados em rede de alginato-Ca2+com poli(N-isopropil acrilamida) (PNIPAAm) entrelaçado, com diferentes teores de alginato e de PNIPAAm, foi caracterizada por meio de medidas de grau de intumescimento (Q), microscopia eletrônica de varredura (MEV) e propriedades mecânicas [tensão máxima de compressão (σ), densidade aparente de reticulação (νe) e módulo de elasticidade (E)]. Os valores de Q variam inversamente com νe. Para o parâmetro νe contribuem as concentrações de retículos alginato-Ca2+ e de cadeias de PNIPAAm. Hidrogéis com maiores valores de Q possuem maiores poros. Resultados de propriedades mecânicas demonstraram que hidrogéis com maior νe apresentam maior rigidez e resistência à compressão, sendo este efeito mais intenso acima da LCST do PNIPAAm. O controle dessas propriedades nesses hidrogéis termos-sensíveis torna esses materiais potencialmente viáveis para aplicação em sistemas carreadores para liberação controlada e/ou prolongada de fármacos e substratos para crescimento e cultura de célula.