Chain stiffness and extension of chitosans and periodate oxidised chitosans studied by size-exclusion chromatography combined with light scattering and viscosity detectors

Hydrogels Based on Proteins Cross-Linked with Carbonyl Derivatives of Polysaccharides, with Biomedical Applications

Adding carbonyl groups into the hydrogel matrix improves the stability and biocompatibility of the hydrogels, making them suitable for different biomedical applications. In this review article, we will discuss the use of hydrogels based on polysaccharides modified by oxidation, with particular attention paid to the introduction of carbonyl groups. These hydrogels have been developed for several applications in tissue engineering, drug delivery, and wound healing. The review article discusses the mechanism by which oxidized polysaccharides can introduce carbonyl groups, leading to the development of hydrogels through cross-linking with proteins. These hydrogels have tunable mechanical properties and improved biocompatibility. Hydrogels have dynamic properties that make them promising biomaterials for various biomedical applications. This paper comprehensively analyzes hydrogels based on cross-linked proteins with carbonyl groups derived from oxidized polysaccharides, including microparticles, nanoparticles, and films. The applications of these hydrogels in tissue engineering, drug delivery, and wound healing are also discussed.

Reaction kinetics of chitosan nanogels crosslinked by genipin

Crosslinking of chitosan chains in dilute solution by natural crosslinker genipin leads to biocompatible nanogels. Here we investigated the reaction kinetics between chitosan and genipin in a 200 mM acetate buffer at 37 °C, and the structural and conformational evolutions of the nanogels during the crosslinking reaction by multi detection asymmetric flow field-flow fractionation (AF4). Upon crosslinking by genipin, the z-average hydrodynamic radius Rhz of the chitosan chains increased from 26 nm to 130 nm, while the weight average molar mass Mw increased from 2.0 × 105 g/mol to 1.8 × 107 g/mol. The crosslinking reaction appeared to be first-order and size-dependent. In particular, the intrachain crosslinking reaction was preferentially for nanogels having the larger size, leading to formation of branched chains/nanogels having a wide range of molar masses between 106 and 108 g/mol but a similar radius of gyration Rg ∼ 40 nm. For the largest nanogel fractions with M > 2.0 × 108 g/mol, both Rg and Rh showed a scaling relation with exponent 1/3 and a structure parameter Rg/Rh = 0.74, as expected for the hard sphere particle. The reaction was accompanied by a reduction of charge density and an increase in hydrophobicity of chitosan nanogels, which plays a key role in the formation of uniform size nanogels with chain density ρ(Rh) up to 0.45 g/cm3.

Marine collagen-chitosan-fucoidan/chondroitin sulfate cryo-biomaterials loaded with primary human cells envisaging cartilage tissue engineering

Cartilage repair after a trauma or a degenerative disease like osteoarthritis (OA) continues to be a big challenge in current medicine due to the limited self-regenerative capacity of the articular cartilage tissues. To overcome the current limitations, tissue engineering and regenerative medicine (TERM) and adjacent areas have focused their efforts on new therapeutical procedures and materials capable of restoring normal tissue functionalities through polymeric scaffolding and stem cell engineering approaches. For this, the sustainable exploration of marine origin materials has emerged in the last years as a natural alternative to mammal sources, benefiting from their biological properties (e.g., biocompatibility, biodegradability, no toxicity, among others) for the development of several types of scaffolds. In this study, marine collagen(jCOL)-chitosan(sCHT)-fucoidan(aFUC)/chondroitin sulfate(aCS) were cryo-processed (-20 °C, -80 °C, and -196 °C) and a chemical-free crosslinking approach was explored to establish cohesive and stable cryogel materials. The cryogels were intensively characterized to assess their oscillatory behavior, thermal structural stability, thixotropic properties (around 45 % for the best formulations), injectability, and surface structural organization. Additionally, the cryogels demonstrate an interesting microenvironment in in vitro studies using human adipose-derived stem cells (hASCs), supporting their viability and proliferation. In both physic-chemical and in vitro studies, the systems that contain fucoidan in their formulations, i.e., C1 (jCOL, sCHT, aFUC) and C3 (jCOL, sCHT, aFUC, aCS), submitted at -80 °C, are those that demonstrated most promising results for future application in articular cartilage tissues.

Conformation and persistence length of chitosan in aqueous solutions of different ionic strengths via asymmetric flow field-flow fractionation

Conformation of chitosan in acidic aqueous solutions is strongly influenced by ionic strength, but the conventional employed size exclusion chromatography is limited to high ionic strength. Here we show that conformation of chitosan in acetate buffer down to millimolar ionic strength can be studied via asymmetric flow field-flow fractionation (AF4), where the separation is governed by the diffusion properties of the chitosan molecules and assisted by the electrostatic repulsion of the polyelectrolyte from the channel membrane. The size of chitosan decreases with ionic strength due to increasing screening of the polyelectrolyte effect. The persistence length of chitosan in the solutions, obtained by fitting the conformation plot by the wormlike chain model, decreases linearly with the Debye screening length from 44.5 nm at a salt concentration of 1.25 mM dominated by the electrostatic contribution to 8.6 nm in 800 mM acetate buffer close to its intrinsic persistence length of 7.7 nm.

Strain Hardening in Highly Acetylated Chitosan Gels

Strain hardening has recently emerged as a near-universal response of biological tissues to mechanical stimulation as well as a powerful regulator of cell fate. Understanding the mechanistic basis for this nonlinear elasticity is crucial for developing bioinspired materials that mimic extracellular matrix mechanics. Here, we show that covalent networks built from highly acetylated chitosans exhibit strain hardening at physiological pH and osmolarity. While varying the chitosan physical-chemical composition and network connectivity, we provide evidence that temporary nodes arising from the entangling of chains between stable cross-links are at the root of nonlinear elasticity. The contour length (L_c) of the said chains revealed that the larger the chain length between the cross-links, the greater is the entanglement over disentanglement upon network stretching. To this end, we calculated that the minimum number of Khun's segments in L_c that contributes to the onset of strain hardening is 15. Furthermore, we identified a relationship between critical strain marking nonlinear elasticity and the network connectivity, being similar to that found for the cytoskeletal collagen matrix, indicating the potential use of semiflexible (neutral pH-soluble) chitosans in assembling extracellular matrix mimics.

ER, Venâncio T, Valderrama AC. Functionalization of an Alginate-Based Material by Oxidation and Reductive Amination

This research focused on the synthesis of a functional alginate-based material via chemical modification processes with two steps: oxidation and reductive amination. In previous alginate functionalization with a target molecule such as cysteine, the starting material was purified and characterized by UV-Vis, ¹H-NMR and HSQC. Additionally, the application of FT-IR techniques during each step of alginate functionalization was very useful, since new bands and spiked signals around the pyranose ring (1200–1000 cm⁻¹) and anomeric region (1000–750 cm⁻¹) region were identified by a second derivative. Additionally, the presence of C₁-H₁ of β-D-mannuronic acid residue as well as C₁-H₁ of α-L-guluronic acid residue was observed in the FT-IR spectra, including a band at 858 cm⁻¹ with characteristics of the N-H moiety from cysteine. The possibility of attaching cysteine molecules to an alginate backbone by oxidation and post-reductive amination processes was confirmed through ¹³C-NMR in solid state; a new peak at 99.2 ppm was observed, owing to a hemiacetal group formed in oxidation alginate. Further, the peak at 31.2 ppm demonstrates the presence of carbon -CH₂-SH in functionalized alginate—clear evidence that cysteine was successfully attached to the alginate backbone, with 185 μmol of thiol groups per gram polymer estimated in alginate-based material by UV-Visible. Finally, it was observed that guluronic acid residue of alginate are preferentially more affected than mannuronic acid residue in the functionalization.

In vitro biological response of human osteoblasts in 3D chitosan sponges with controlled degree of deacetylation and molecular weight

We have studied the effect of chitosan sponges, produced from chitosan batches with distinct degree of deacetylation (DDA) and molecular weight (Mw), on the adhesion, growth and differentiation of primary human osteoblasts with an aim to offer a suitable tool for guided bone regeneration. All the chitosan sponges revealed similar microstructure, irrespective of the DDA (58, 73, 82, 88, and 91 %) and Mw (749, 547, 263, 215, and 170 kDa, respectively). Cell spreading was higher on sponges having a higher DDA. Higher DDA induced a more pronounced increase in alkaline phosphatase activity, osteopontin (OPN), vascular endothelial growth factor-A (VEGF), interleukin-6 (IL-6), and reduction in monocyte chemoattractant protein-1 (MCP-1), sclerostin (SOST) and dickkopf related protein-1 as compared to lower DDA. Lower DDA induced the increased secretion of osteoprotegerin and SOST as compared to higher DDA. The combination of higher DDA and Mw induced an increased secretion of VEGF and IL-6, however reduced the secretion of OPN as compared to chitosan with similar DDA but with lower Mw. In summary, the variations in cellular responses to the different chitosan sponges indicate a potential for individual tailoring of desired responses in guided bone regeneration.

On the Mechanism of Genipin Binding to Primary Amines in Lactose-Modified Chitosan at Neutral pH

The present manuscript deals with the elucidation of the mechanism of genipin binding by primary amines at neutral pH. UV-VIS and CD measurements both in the presence of oxygen and in oxygen-depleted conditions, combined with computational analyses, led to propose a novel mechanism for the formation of genipin derivatives. The indications collected with chiral and achiral primary amines allowed interpreting the genipin binding to a lactose-modified chitosan (CTL or Chitlac), which is soluble at all pH values. Two types of reaction and their kinetics were found in the presence of oxygen: (i) an interchain reticulation, which involves two genipin molecules and two polysaccharide chains, and (ii) a binding of one genipin molecule to the polymer chain without chain-chain reticulation. The latter evolves in additional interchain cross-links, leading to the formation of the well-known blue iridoid-derivatives.

Design of biostable scaffold based on collagen crosslinked by dialdehyde chitosan with presence of gallic acid

In this study, we have prepared the biostable collagen scaffold which is crosslinked by dialdehyde chitosan (DAC) with presence of Gallic acid (GA) and characterized its physico-chemical, biostable and biocompatible properties. The digital photographic and scanning electron microscopic (SEM) images of the prepared collagen scaffold is exposed well with properly oriented interconnected porous natured structure. The appearance of diffraction peaks showed slightly crystalline characteristic when compared to others. The differential scanning calorimetric (DSC) and thermogravimetric analysis (TGA) measurements indicates well significantly increased denaturation temperature (T_D) and decreased decomposition rate. FT-IR result suggests the structural integrity of collagen which favours the molecular stability. The dialdehyde groups from DAC crosslinked with collagen functional groups that increase the molecular crosslinking owing to the large number of amino groups in its molecular chain. This scaffold exhibited 87% resistance against collagenolytic degradation by collagenase. The results showed that the improved biostability which prevents the free access of the collagenase to binds with the collagen triple helical chains. This scaffold confirm high biocompatibilities; enhanced cell proliferation and adhesions properties. This results gains new insight into the collagen scaffold to improves the biostability. This could be suitable method to preparation of collagenous biomaterials for tissue engineering applications.

The Application of Small-Angle Light Scattering for Rheo-Optical Characterization of Chitosan Colloidal Solutions

In the recent studies on chitosan hydrogels, it was found that understanding both rheological and structural properties plays an important role in their application. Therefore, a combination of two independent techniques was applied to investigate micro- and macroscopic properties of chitosan colloidal system. Studies on viscous properties, as well as the sol-gel phase transition process, were performed using rheological methods coupled with the small angle light scattering (SALS) technique. Based on the anisotropy of scattering patterns obtained during rotational shear tests, it was found that the chitosan solution reveals two different behaviors delimited by the critical value of the shear rate. Below a critical value, chitosan clusters are deformed without breaking up aggregates, whereas after exceeding a critical value, chitosan clusters apart from deformation also breakup into smaller aggregates. The values of the radius of gyration determined by applying the Debye function allow one to state that with an increase of chitosan concentration, molecule size decreases. An analysis of the light scattering data from the temperature ramp test showed that with an increase of temperature, the level of polymer coil swelling increases. Simultaneously, the supply of thermal energy leads to a neutralization of the charge of chitosan chains. As a consequence, the formation of intermolecular links occurs and a gel structure is formed.

Targeted Drug Delivery and Treatment of Endoparasites with Biocompatible Particles of pH-Responsive Structure

Biomaterials conceived for vectorization of bioactives are currently considered for biomedical, biological, and environmental applications. We have produced a pH-sensitive biomaterial composed of natural source alginate and chitosan polysaccharides for application as a drug delivery system via oral administration. The composite particle preparation was in situ monitored by means of isothermal titration calorimetry. The strong interaction established between the macromolecules during particle assembly led to 0.60 alginate/chitosan effective binding sites with an intense exothermic effect and negative enthalpy variation on the order of a thousand kcal/mol. In the presence of model drugs mebendazole and ivermectin, with relatively small and large structures, respectively, mebendazole reduced the amount of chitosan monomers available to interact with alginate by 27%, which was not observed for ivermectin. Nevertheless, a state of intense negative Gibbs energy and large entropic decrease was achieved, providing evidence that formation of particles is thermodynamically driven and favored. Small-angle X-ray scattering provided further evidence of similar surface aspects independent of the presence of drug. The physical responses of the particles to pH variation comprise partial hydration, swelling, and the predominance of positive surface charge in strong acid medium, whereas ionization followed by deprotonation leads to compaction and charge reversal rather than new swelling in mild and slightly acidic mediums, respectively. In vivo performance was evaluated in the treatment of endoparasites in Corydoras fish. Systematically with a daily base oral administration, particles significantly reduced the infections over 15 days of treatment. The experiments provide evidence that utilizing particles granted and boosted the action of the antiparasitic drugs, leading to substantial reduction or elimination of infection. Hence, the pH-responsive particles represent a biomaterial with prominent characteristics that is promising for the development of targeted oral drug delivery.

Rheo-Kinetic Study of Sol-Gel Phase Transition of Chitosan Colloidal Systems

Chitosan colloidal systems, created by dispersing in aqueous solutions of hydrochloric acid, with and without the addition of disodium β-glycerophosphate (β-NaGP), were prepared for the investigation of forming mechanisms of chitosan hydrogels. Three types of chitosan were used in varying molecular weights. The impacts of the charge and shape of the macromolecules on the phase transition process were assessed. The chitosan system without the addition of β-NaGP was characterized by stiff and entangled molecules, in contrast to the chitosan system with the addition of β-NaGP, wherein the molecules adopt a more flexible and disentangled form. Differences in molecules shapes were confirmed using the Zeta potential and thixotropy experiments. The chitosan system without β-NaGP revealed a rapid nature of phase transition-consistent with diffusion-limited aggregation (DLA). The chitosan system with β-NaGP revealed a two-step nature of phase transition, wherein the first step was consistent with reaction-limited aggregation (RLA), while the second step complied with diffusion-limited aggregation (DLA).

Mimicking mechanical response of natural tissues. Strain hardening induced by transient reticulation in lactose-modified chitosan (chitlac)

The effect of transient cross-links has been explored on a lactose-modified chitosan, which previously had shown interesting biological features. The presence of galactose side chains and of the polyol spacer resulted particularly appealing for the reticulation by borate ions. The interaction between chitlac and borax was investigated by means of ¹¹B NMR while rheology pointed to a marked non-linear behavior depending on the amount of borax added to the system. The presence of limited amount of cross-linking ion led to dilatant behavior when the steady flow curve was measured. In addition, strain stiffening was noticed on elastic response upon exceeding a critical stress, indicating a transient nature in the formation of the cross-links. The non-linear response of chitlac in the presence of borax compared surprisingly well with the one showed by proteins composing the natural ECM pointing at a possible role of mechanotransduction in the biological significance of the modified chitosan.

An accurate coarse-grained model for chitosan polysaccharides in aqueous solution

Computational models can provide detailed information about molecular conformations and interactions in solution, which is currently inaccessible by other means in many cases. Here we describe an efficient and precise coarse-grained model for long polysaccharides in aqueous solution at different physico-chemical conditions such as pH and ionic strength. The Model is carefully constructed based on all-atom simulations of small saccharides and metadynamics sampling of the dihedral angles in the glycosidic links, which represent the most flexible degrees of freedom of the polysaccharides. The model is validated against experimental data for Chitosan molecules in solution with various degree of deacetylation, and is shown to closely reproduce the available experimental data. For long polymers, subtle differences of the free energy maps of the glycosidic links are found to significantly affect the measurable polymer properties. Therefore, for titratable monomers the free energy maps of the corresponding links are updated according to the current charge of the monomers. We then characterize the microscopic and mesoscopic structural properties of large chitosan polysaccharides in solution for a wide range of solvent pH and ionic strength, and investigate the effect of polymer length and degree and pattern of deacetylation on the polymer properties.

Nanoindentation and finite element modelling of chitosan-alginate multilayer coated hydrogels

Composite soft materials are used as compounds for determining the effects of mechanical cues on cell behavior and cell encapsulation and for controlling drug release. The appropriate composite soft materials are conventionally prepared by selective deposition of polymers at the surface of an ionic hydrogel. In the present study we address the impact of a mechanically stratified two-layer structure of these materials on their overall mechanical characterization by applying a combination of nanoindentation, confocal microscopy and finite element modelling. We prepare covalent cross-linked hydrogels based on acrylamide (AAM) and including an anionic group, and impregnate them using a multilayer deposition strategy of alternating exposure to cationic chitosan and anionic alginate. The thickness of the chitosan-alginate layer on the hydrogels was determined to be 0.4 ± 0.05 μm for 4 bilayers, and 0.7 ± 0.1 μm for the 8 bilayer deposition procedure employing a fluorescently labelled chitosan and confocal microscopy. The force-indentation data for the AAM gels were highly reproducible, whereas 77% and 50% of the force-indentation data were reproducible following the 4 and 8 bilayer deposition. The main trends in the reproducible force-distance data were found to yield an apparent increased Young's modulus after the deposition. Finite element modelling showed that adaption of a homogeneous Young's modulus for the specimens with deposited layers yields approximately three times too low stiffness compared to the estimate of the mechanical properties of the outer part in the two-layered mechanical model. The thickness of the multilayer region determined by confocal microscopy was used in the model. This study shows that the mechanical layered property needs to be included in the interpretation of the nanoindentation data when there is a significant mechanical contrast.

Squid beak inspired water processable chitosan composites with tunable mechanical properties

By modulating the degree of cross-linking, this lightweight composite can be tuned with a range of mechanical properties.

A novel method to estimate the stiffness of carbohydrate polyelectrolyte polymers based on the ionic strength dependence of zeta potential

Polysaccharides have received a great deal of attention from, for example, the food, cosmetic and pharmaceutical industries. Their conformations (flexibility/stiffness) span a wide range of conformational flexibilities with large hydrated volumes, these properties are important in relation to polysaccharide structure-function relationships. Perhaps the simplest parameter available to estimate the dilute solution conformation of polysaccharides is the Smidsrød-Haug stiffness parameter (B) where the stiffness of polyelectrolytes can be estimated by measuring the intrinsic viscosity at a number of different ionic strengths. In this paper we propose an alternative method for estimating the Smidsrød-Haug stiffness parameter (B) using the ionic strength dependency of zeta potential. For this purpose we have studied a number of different polysaccharides.

Periodate oxidation and macromolecular compaction of hyaluronan

Partial periodate oxidation of hyaluronan (HA) leads to ring opening of the 4-linked D-glucuronate (GlcA) residues, providing a particularly flexible element within otherwise semi-flexible chains. This leads to compaction of the chains as demonstrated by a pronounced decrease in the intrinsic persistence length, which was determined on the basis of the molecular weight dependence of radius of gyration (RG) and the intrinsic viscosity. These parameters were readily obtained using size-exclusion chromatography (SEC) with an online multi-angle laser light scattering (MALLS) detector, a viscosity detector, and a concentration-sensitive detector. The electrostatic contribution to the total persistence length increased with increasing degree of oxidation. Compared to alginates and chitosans, HA becomes less degraded during the oxidation, which is attributed to a protective effect of periodate-resistant N-acetyl-D-glucosamine (GlcNAc) residues adjacent to periodate-sensitive GlcA residues in HA.

Chitosans for delivery of nucleic acids

Alternatives to efficient viral vectors in gene therapy are desired because of their poor safety profiles. Chitosan is a promising non-viral nucleotide delivery vector because of its biocompatibility, biodegradability, low immunogenicity and ease of manufacturing. Since the transfection efficiency of chitosan polyplexes is relatively low compared to viral counterparts, there is an impetus to gain a better understanding of the structure-performance relationship. Recent progress in preparation and characterisation has enabled coupling analysis of chitosans structural parameters that has led to increased TE by tailoring of chitosan's structure. In this review, we summarize the recent advances that have lead to a more rational design of chitosan polyplexes. We present an integrated review of all major areas of chitosan-based transfection, including preparation, chitosan and polyplexes physicochemical characterisation, in vitro and in vivo assessment. In each, we present the obstacles to efficient transfection and the strategies adopted over time to surmount these impediments.

PEGylated chitosan complexes DNA while improving polyplex colloidal stability and gene transfection efficiency

Chitosan is widely explored as a gene delivery vehicle due to its ability to condense DNA, facilitate transport, and subsequent release allowing gene expression, as well as protecting the DNA. Here, we investigate the enhancement of chitosan-DNA dispersion stability while maintaining transfection efficacy by PEGylation of chitosan. Molecular properties of fully deacetylated chitosans and degree of PEGylation were investigated with respect to compaction of DNA, stability and transfection efficacy. Each of the three chitosan samples with varying chain lengths was PEGylated at three different degrees. The chitosans with degree of PEGylation from 0.6 to 1.9% made polyplexes with DNA. PBS induced colloidal aggregation of polyplexes with initial radius of about 100 nm observed for nonPEGylated chitosans was suppressed for 1.9% PEGylated chitosans. The observed increase in transfection efficacy coinciding with increased polyplex colloidal stability suggests that aggregation of gene-delivery packages may reduce the transfection efficacy.

Marine polysaccharides in microencapsulation and application to aquaculture: "from sea to sea"

This review's main objective is to discuss some physico-chemical features of polysaccharides as intrinsic determinants for the supramolecular structures that can efficiently provide encapsulation of drugs and other biological entities. Thus, the general characteristics of some basic polysaccharides are outlined in terms of their conformational, dynamic and thermodynamic properties. The analysis of some polysaccharide gelling properties is also provided, including the peculiarity of the charged polysaccharides. Then, the way the basic physical chemistry of polymer self-assembly is made in practice through the laboratory methods is highlighted. A description of the several literature procedures used to influence molecular interactions into the macroscopic goal of the encapsulation is given with an attempt at classification. Finally, a practical case study of specific interest, the use of marine polysaccharide matrices for encapsulation of vaccines in aquaculture, is reported.

Transcriptional responses of Bacillus cereus towards challenges with the polysaccharide chitosan

The antibacterial activity of the polysaccharide chitosan towards different bacterial species has been extensively documented. The response mechanisms of bacteria exposed to this biopolymer and the exact molecular mechanism of action, however, have hardly been investigated. This paper reports the transcriptome profiling using DNA microarrays of the type-strain of Bacillus cereus (ATCC 14579) exposed to subinhibitory concentrations of two water-soluble chitosan preparations with defined chemical characteristics (molecular weight and degree of acetylation (F(A))). The expression of 104 genes was significantly altered upon chitosan A (weight average molecular weight (M(w)) 36.0 kDa, F(A) = 0.01) exposure and 55 genes when treated with chitosan B (M(w) 28.4 kDa, F(A) = 0.16). Several of these genes are involved in ion transport, especially potassium influx (BC0753-BC0756). Upregulation of a potassium transporting system coincides with previous studies showing a permeabilizing effect on bacterial cells of this polymer with subsequent loss of potassium. Quantitative PCR confirmed the upregulation of the BC0753 gene encoding the K(+)-transporting ATPase subunit A. A markerless gene replacement method was used to construct a mutant strain deficient of genes encoding an ATP-driven K(+) transport system (Kdp) and the KdpD sensor protein. Growth of this mutant strain in potassium limiting conditions and under salt stress did not affect the growth pattern or growth yield compared to the wild-type strain. The necessity of the Kdp system for potassium acquisition in B. cereus is therefore questionable. Genes involved in the metabolism of arginine, proline and other cellular constituents, in addition to genes involved in the gluconeogenesis, were also significantly affected. BC2798 encoding a chitin binding protein was significantly downregulated due to chitosan exposure. This study provides insight into the response mechanisms of B. cereus to chitosan treatment and the significance of the Kdp system in potassium influx under challenging conditions.

Inhibition of Bacillus cereus spore outgrowth and multiplication by chitosan

Bacillus cereus is an endospore-forming bacterium able to cause food-associated illness. Different treatment processes are used in the food industry to reduce the number of spores and thereby the potential of foodborne disease. Chitosan is a polysaccharide with well-documented antibacterial activity towards vegetative cells. The activity against bacterial spores, spore germination and subsequent outgrowth and growth (the latter two events hereafter denoted (out)growth), however, is poorly documented. By using six different chitosans with defined macromolecular properties, we evaluated the effect of chitosan on Bacillus cereus spore germination and (out)growth using optical density assays and a dipicolinic acid release assay. (Out)growth was inhibited by chitosan, but germination was not. The action of chitosan was found to be concentration-dependent and also closely related to weight average molecular weight (M(w)) and fraction of acetylation (F(A)) of the biopolymer. Chitosans of low acetylation (F(A)=0.01 or 0.16) inhibited (out)growth more effectively than higher acetylated chitosans (F(A)=0.48). For the F(A)=0.16 chitosans with medium (56.8kDa) and higher M(w) (98.3kDa), a better (out)growth inhibition was observed compared to low M(w) (10.6kDa) chitosan. The same trend was not evident with chitosans of 0.48 acetylation, where the difference in activity between the low (19.6kDa) and high M(w) (163.0kDa) chitosans was only minor. In a spore test concentration corresponding to 10(2)-10(3)CFU/ml (spore numbers relevant to food), less chitosan was needed to suppress (out)growth compared to higher spore numbers (equivalent to 10(8)CFU/ml), as expected. No major differences in chitosan susceptibility between three different strains of B. cereus were detected. Our results contribute to a better understanding of chitosan activity towards bacterial spore germination and (out)growth.

Dynamics of chitosan by (1)h NMR relaxation

The dynamics of chitosan (CS) in solution have been studied by (1)H NMR relaxation [longitudinal (T(1)) and transverse (T(2)) relaxation times and NOE] as a function of the degrees of acetylation (DA, 1-70) and polymerization (DP, 10-1200), temperature (278-343 K), concentration (0.1-30 g/L), and ionic strength (50-400 mM). This analysis points to CS as a semirigid polymer with increased flexibility at higher DA in agreement with reduced electrostatic repulsions between protonated amino groups.