1
|
Thai NLB, Beaman HT, Perlman M, Obeng EE, Du C, Monroe MBB. Chitosan Poly(vinyl alcohol) Methacrylate Hydrogels for Tissue Engineering Scaffolds. ACS APPLIED BIO MATERIALS 2024. [PMID: 38380883 DOI: 10.1021/acsabm.3c01209] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/22/2024]
Abstract
A major challenge in tissue engineering scaffolds is controlling scaffold degradation rates during healing while maintaining mechanical properties to support tissue formation. Hydrogels are three-dimensional matrices that are widely applied as tissue scaffolds based on their unique properties that can mimic the extracellular matrix. In this study, we develop a hybrid natural/synthetic hydrogel platform to tune the properties for tissue engineering scaffold applications. We modified chitosan and poly(vinyl alcohol) (PVA) with photo-cross-linkable methacrylate functional groups and then synthesized a library of chitosan PVA methacrylate hydrogels (ChiPVAMA) with two different photoinitiators, Irgacure 2959 (I2959) and lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP). ChiPVAMA hydrogels showed tunability in degradation rates and mechanical properties based on both the polymer content and photoinitiator type. This tunability could enable their application in a range of tissue scaffold applications. In a 2D scratch wound healing assay, all hydrogel samples induced faster wound closure compared to a gauze clinical wound dressing control. NIH/3T3 cells encapsulated in hydrogels showed a high viability (∼92%) over 14 days, demonstrating the capacity of this system as a supportive cell scaffold. In addition, hydrogels containing a higher chitosan content demonstrated a high antibacterial capacity. Overall, ChiPVAMA hydrogels provide a potential tissue engineering scaffold that is tunable, degradable, and suitable for cell growth.
Collapse
Affiliation(s)
- Nghia Le Ba Thai
- Department of Biomedical and Chemical Engineering, Syracuse Biomaterials Institute, and BioInspired Syracuse: Institute for Material and Living Systems, Syracuse University, Syracuse, New York 13244, United States
| | - Henry T Beaman
- Department of Biomedical and Chemical Engineering, Syracuse Biomaterials Institute, and BioInspired Syracuse: Institute for Material and Living Systems, Syracuse University, Syracuse, New York 13244, United States
| | - Megan Perlman
- Department of Biomedical and Chemical Engineering, Syracuse Biomaterials Institute, and BioInspired Syracuse: Institute for Material and Living Systems, Syracuse University, Syracuse, New York 13244, United States
| | - Ernest E Obeng
- Department of Biomedical and Chemical Engineering, Syracuse Biomaterials Institute, and BioInspired Syracuse: Institute for Material and Living Systems, Syracuse University, Syracuse, New York 13244, United States
| | - Changling Du
- Department of Biomedical and Chemical Engineering, Syracuse Biomaterials Institute, and BioInspired Syracuse: Institute for Material and Living Systems, Syracuse University, Syracuse, New York 13244, United States
| | - Mary Beth B Monroe
- Department of Biomedical and Chemical Engineering, Syracuse Biomaterials Institute, and BioInspired Syracuse: Institute for Material and Living Systems, Syracuse University, Syracuse, New York 13244, United States
| |
Collapse
|
2
|
Özdamar B, Sürmeli Y, Şanlı-Mohamed G. Immobilization of Olive Leaf Extract with Chitosan Nanoparticles as an Adjunct to Enhance Cytotoxicity. ACS OMEGA 2023; 8:28994-29002. [PMID: 37599944 PMCID: PMC10433347 DOI: 10.1021/acsomega.3c01494] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 03/05/2023] [Accepted: 07/18/2023] [Indexed: 08/22/2023]
Abstract
We immobilized the olive leaf extract (OLE) with chitosan nanoparticles (CNPs) by optimizing the effect of various immobilization conditions, and OLE-loaded CNPs (OLE-CNPs) were then elaborately characterized physicochemically by scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy, dynamic light scattering (DLS), and atomic force microscopy (AFM). Under optimal conditions, CNPs were able to accommodate the OLE with a loading capacity of 97.5%. The resulting OLE-CNPs had a spherical morphology, and their average diameter was approximately 100 nm. The cytotoxic influence, cell cycle distribution, and apoptosis stage of OLE and OLE-CNPs were analyzed on lung carcinoma (A549) and breast adenocarcinoma (MCF-7) cell lines. In an in vitro cytotoxic assay, IC50 values of OLE-CNPs were determined to be 540 μg/mL for A549 and 810 μg/mL for MCF-7. The treatment of both A549 and MCF-7 with OLE-CNPs caused the highest cell arrest in G0/G1 in a dose-independent manner. OLE-CNPs affected cell cycle distribution in a manner different from free OLE treatment in both cancer cells. A549 and MCF-7 cells were predominantly found in the late apoptosis and necrosis phases, respectively, upon treatment of 1000 μM OLE-CNPs. Our results suggest that CNPs enhance the utility of OLEs as nutraceuticals in cancer and that OLE-CNPs can be utilized as an adjunct to cancer therapy.
Collapse
Affiliation(s)
- Burcu Özdamar
- Department
of Chemistry, İzmir Institute of
Technology, 35430 İzmir, Turkey
| | - Yusuf Sürmeli
- Department
of Biotechnology and Bioengineering, İzmir
Institute of Technology, 35430 İzmir, Turkey
- Department
of Agricultural Biotechnology, Namık
Kemal University, 59030 Tekirdağ, Turkey
| | - Gülşah Şanlı-Mohamed
- Department
of Chemistry, İzmir Institute of
Technology, 35430 İzmir, Turkey
- Department
of Biotechnology and Bioengineering, İzmir
Institute of Technology, 35430 İzmir, Turkey
| |
Collapse
|
3
|
Bal Y, Sürmeli Y, Şanlı-Mohamed G. Antiproliferative and Apoptotic Effects of Olive Leaf Extract Microcapsules on MCF-7 and A549 Cancer Cells. ACS OMEGA 2023; 8:28984-28993. [PMID: 37599941 PMCID: PMC10433482 DOI: 10.1021/acsomega.3c01493] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 03/05/2023] [Accepted: 07/18/2023] [Indexed: 08/22/2023]
Abstract
Alginate microcapsules are a talented means for the delivery of broad curative biomacromolecules. In this study, we immobilized olive leaf extract (OLE) by calcium alginate (CA) and chitosan-coated CA (CCA) and characterized the OLE-loaded CA and CCA. The cytotoxic effect, the cell cycle arrest, and the apoptotic effect of OLE and its microcapsules were investigated against breast adenocarcinoma (MCF-7) and lung carcinoma (A549). As a result, the loading capacity of OLE-CA and OLE-CCA was found to be 80 and 99%, respectively, in optimal conditions. Also, OLE-CA and OLE-CCA were characterized by unique FTIR peaks and morphological display relative to the empty CCA microcapsules. The cytotoxicity analysis showed that the IC50 values of OLE-CA and OLE-CCA were determined to be 312 and 0.94 μg mL-1 against A549, respectively, whereas these were found to be 865.4 and 425.5 μg mL-1 for MCF-7 cells. On the other hand, the OLE microcapsules did not possess in any concentration of cytotoxic influence on the BEAS 2B healthy cell line. Also, the exposure of OLE-CCA to MCF-7 and A549 resulted in the arrest of more MCF-7 and A549 cells at the G0/G1 phase compared to the OLE. A549 and MCF-7 cells were predominantly found in the late apoptosis phase and necrosis phase, respectively. Optical microscopy images confirmed that OLE microcapsules were more effective against MCF-7 and A549 than free OLE. The present work suggested that the OLE microcapsules might be administered as nutrition supplements for cancer therapy.
Collapse
Affiliation(s)
- Yıldız Bal
- Department
of Biotechnology and Bioengineering, İzmir
Institute of Technology, 35430 İzmir, Turkey
| | - Yusuf Sürmeli
- Department
of Biotechnology and Bioengineering, İzmir
Institute of Technology, 35430 İzmir, Turkey
- Department
of Agricultural Biotechnology, Tekirdağ
Namık Kemal University, 59030 Tekirdağ, Turkey
| | - Gülşah Şanlı-Mohamed
- Department
of Biotechnology and Bioengineering, İzmir
Institute of Technology, 35430 İzmir, Turkey
- Department
of Chemistry, İzmir Institute of
Technology, 35430 İzmir, Turkey
| |
Collapse
|
4
|
Syed MH, Zahari MAKM, Khan MMR, Beg MDH, Abdullah N. An overview on recent biomedical applications of biopolymers: Their role in drug delivery systems and comparison of major systems. J Drug Deliv Sci Technol 2022. [DOI: 10.1016/j.jddst.2022.104121] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/29/2022]
|
5
|
A Self-Forming Hydrogel from a Bactericidal Copolymer: Synthesis, Characterization, Biological Evaluations and Perspective Applications. Int J Mol Sci 2022; 23:ijms232315092. [PMID: 36499417 PMCID: PMC9741259 DOI: 10.3390/ijms232315092] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/08/2022] [Revised: 11/26/2022] [Accepted: 11/28/2022] [Indexed: 12/03/2022] Open
Abstract
Objects touched by patients and healthcare workers in hospitals may harbor pathogens, including multi-drug resistant (MDR) staphylococci, enterococci (VRE), Escherichia coli, Acinetobacter, and Pseudomonas species. Medical devices contaminated by these pathogens may also act as a source of severe and difficult-to-treat human infections, thus becoming a critical public health concern requiring urgent resolutions. To this end, we recently reported the bactericidal effects of a cationic copolymer (CP1). Here, aiming at developing a bactericidal formulation possibly to be used either for surfaces disinfection or to treat skin infections, CP1 was formulated as a hydrogel (CP1_1.1-Hgel). Importantly, even if not cross-linked, CP1 formed the gel upon simple dispersion in water, without requiring gelling agents or other additives which could be skin-incompatible or interfere with CP1 bactericidal effects in possible future topical applications. CP1_1.1-Hgel was characterized by attenuated-total-reflectance Fourier transform infrared (ATR-FTIR) and UV-Vis spectroscopy, as well as optic and scanning electron microscopy (OM and SEM) to investigate its chemical structure and morphology. Its stability was assessed by monitoring its inversion properties over time at room temperature, while its mechanical characteristics were assessed by rheological experiments. Dose-dependent cytotoxicity studies performed on human fibroblasts for 24 h with gel samples obtained by diluting CP_1.1-Hgel at properly selected concentrations established that the 3D network formation did not significantly affect the cytotoxic profile of CP1. Also, microbiologic investigations carried out on two-fold serial dilutions of CP1-gel confirmed the minimum inhibitory concentrations (MICs) previously reported for the not formulated CP1.Selectivity indices values up to 12 were estimated by the values of LD50 and MICs determined here on gel samples.
Collapse
|
6
|
Wei Z, Wang M, Li Y, An Y, Li K, Bo K, Guo M. Sodium alginate as an eco-friendly rheology modifier and salt-tolerant fluid loss additive in water-based drilling fluids. RSC Adv 2022; 12:29852-29864. [PMID: 36321088 PMCID: PMC9580471 DOI: 10.1039/d2ra04448j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/19/2022] [Accepted: 10/05/2022] [Indexed: 12/02/2022] Open
Abstract
The rheological and filtration performance of drilling fluids greatly depends on the additives used. To address the negative impact on the drilling fluid performance stemming from electrolyte contamination, a sustainable sodium alginate (SA) biopolymer was employed as an additive in water-based drilling fluids to overcome the performance deterioration caused by the polyelectrolyte effect under salt contamination. The results demonstrated that SA performs better than sodium carboxymethyl cellulose (Na-CMC) and polyanionic cellulose (PAC-LV), the widely used drilling fluid additives. Although exposed to highly concentrated salt contamination, the addition of SA can mitigate viscosity variation and maintain a lower filtration volume of a base fluid (BF), whereas an advanced variation in CMC/BF and PAC/BF was observed. The possible rheology and filtration mechanism of SA under highly concentrated salt contamination were investigated through zeta potential, particle size distribution, and scanning electron microscopy (SEM). The results revealed that the anchoring groups on the SA molecular chain enable them to strongly adsorb on the negatively charged bentonite surface via hydrogen and ionic bond interactions, leading to a significant improvement in both rheological and filtration performance. Therefore, SA with excellent salt tolerance and sustainability confers practical applicability that could extend to the preparation of saltwater-based and other inhibitive drilling fluids.
Collapse
Affiliation(s)
- Zhaojie Wei
- College of Construction Engineering, Jilin UniversityChangchun 130021China,Key Laboratory of Drilling and Exploitation Technology in Complex Conditions, Ministry of Natural Resources, Jilin UniversityChangchun 130021China
| | - Maosen Wang
- College of Construction Engineering, Jilin UniversityChangchun 130021China,Key Laboratory of Drilling and Exploitation Technology in Complex Conditions, Ministry of Natural Resources, Jilin UniversityChangchun 130021China
| | - Ying Li
- College of Construction Engineering, Jilin UniversityChangchun 130021China,Key Laboratory of Drilling and Exploitation Technology in Complex Conditions, Ministry of Natural Resources, Jilin UniversityChangchun 130021China
| | - Yinghui An
- College of Construction Engineering, Jilin UniversityChangchun 130021China,Key Laboratory of Drilling and Exploitation Technology in Complex Conditions, Ministry of Natural Resources, Jilin UniversityChangchun 130021China
| | - Kaijun Li
- College of Construction Engineering, Jilin UniversityChangchun 130021China,Key Laboratory of Drilling and Exploitation Technology in Complex Conditions, Ministry of Natural Resources, Jilin UniversityChangchun 130021China
| | - Kun Bo
- College of Construction Engineering, Jilin UniversityChangchun 130021China,Key Laboratory of Drilling and Exploitation Technology in Complex Conditions, Ministry of Natural Resources, Jilin UniversityChangchun 130021China
| | - Mingyi Guo
- College of Construction Engineering, Jilin UniversityChangchun 130021China,Key Laboratory of Drilling and Exploitation Technology in Complex Conditions, Ministry of Natural Resources, Jilin UniversityChangchun 130021China
| |
Collapse
|
7
|
Khan F, Atif M, Haseen M, Kamal S, Khan MS, Shahid S, Nami SAA. Synthesis, classification and properties of hydrogels: their applications in drug delivery and agriculture. J Mater Chem B 2021; 10:170-203. [PMID: 34889937 DOI: 10.1039/d1tb01345a] [Citation(s) in RCA: 49] [Impact Index Per Article: 16.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Absorbent polymers or hydrogel polymer materials have an enhanced water retention capacity and are widely used in agriculture and medicine. The controlled release of bioactive molecules (especially drug proteins) by hydrogels and the encapsulation of living cells are some of the active areas of drug discovery research. Hydrogel-based delivery systems may result in a therapeutically advantageous outcome for drug delivery. They can provide various sequential therapeutic agents including macromolecular drugs, small molecule drugs, and cells to control the release of molecules. Due to their controllable degradability, ability to protect unstable drugs from degradation and flexible physical properties, hydrogels can be used as a platform in which various chemical and physical interactions with encapsulated drugs for controlled release in the system can be studied. Practically, hydrogels that possess biodegradable properties have aroused greater interest in drug delivery systems. The original three-dimensional structure gets broken down into non-toxic substances, thus confirming the excellent biocompatibility of the gel. Chemical crosslinking is a resource-rich method for forming hydrogels with excellent mechanical strength. But in some cases the crosslinker used in the synthesis of the hydrogels may cause some toxicity. However, the physically cross-linked hydrogel preparative method is an alternative solution to overcome the toxicity of cross-linkers. Hydrogels that are responsive to stimuli formed from various natural and synthetic polymers can show significant changes in their properties under external stimuli such as temperature, pH, light, ion changes, and redox potential. Stimulus-responsive hydrogels have a wider range of applications in biomedicine including drug delivery, gene delivery and tissue regeneration. Stimulus-responsive hydrogels loaded with multiple drugs show controlled and sustained drug release and can act as drug carriers. By integrating stimulus-responsive hydrogels, such as those with improved thermal responsiveness, pH responsiveness and dual responsiveness, into textile materials, advanced functions can be imparted to the textile materials, thereby improving the moisture and water retention performance, environmental responsiveness, aesthetic appeal, display and comfort of textiles. This review explores the stimuli-responsive hydrogels in drug delivery systems and examines super adsorbent hydrogels and their application in the field of agriculture.
Collapse
Affiliation(s)
- Faisal Khan
- Department of Chemistry, Aligarh Muslim University, Aligarh 202002, India.
| | - Mohd Atif
- Department of Chemistry, Aligarh Muslim University, Aligarh 202002, India.
| | - Mohd Haseen
- Department of Chemistry, Aligarh Muslim University, Aligarh 202002, India.
| | - Shahid Kamal
- Department of Chemistry, Aligarh Muslim University, Aligarh 202002, India.
| | - Mohd Shoeb Khan
- Interdisciplinary Nanotechnology Centre, Aligarh Muslim University, Aligarh 202002, India
| | - Shumaila Shahid
- Division of Plant Pathology, ICAR-Indian Agricultural Research Institute, New Delhi 110012, India
| | - Shahab A A Nami
- Department of Chemistry, Aligarh Muslim University, Aligarh 202002, India.
| |
Collapse
|
8
|
Kesharwani P, Bisht A, Alexander A, Dave V, Sharma S. Biomedical applications of hydrogels in drug delivery system: An update. J Drug Deliv Sci Technol 2021. [DOI: 10.1016/j.jddst.2021.102914] [Citation(s) in RCA: 19] [Impact Index Per Article: 6.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
9
|
Song F, Kong Y, Shao C, Cheng Y, Lu J, Tao Y, Du J, Wang H. Chitosan-based multifunctional flexible hemostatic bio-hydrogel. Acta Biomater 2021; 136:170-183. [PMID: 34610476 DOI: 10.1016/j.actbio.2021.09.056] [Citation(s) in RCA: 65] [Impact Index Per Article: 21.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/17/2021] [Revised: 09/04/2021] [Accepted: 09/29/2021] [Indexed: 12/17/2022]
Abstract
Realizing the potential application of chitosan as an effective biomedical hemostatic agent has become an emerging research hotspot. However, fabricating a flexible chitosan-based hemostatic bio-hydrogel with self-adhesion feature in humid conditions and rapid hemostasis capability remains a challenge. Herein, we reported the development of chitosan-based hydrogels (DCS-PEGSH gels) with typical multilevel pore structures, which were cross-linked by 3-(3,4-dihydroxyphenyl) propionic acid-modified chitosan (DCS) and sebacic acid-terminated polyethylene glycol modified by p-hydroxybenzaldehyde (PEGSH). By precisely regulating the proportion of PEGSH, the fabricated bio-hydrogels displayed favorable cytocompatibility, suitable stretchability (∼780%), and blood absorbability (1300% ± 50%). Moreover, the strong adhesion (∼68.5 kPa) of the assembled bio-hydrogel ensured its firm adherence on pigskin and on bleeding wound in both static and dynamic humid environments without shedding, thus providing a long service life. The fabricated hydrogels exhibited shorter blood clotting time (50 s) and lower blood clotting index (BCI, 41) than the commercial chitosan sponge (288 s, BCI 65). Notably, the amount of blood loss from the liver in mice was reduced by almost 90% as compared to that for the control group. This study paves a solid way for developing a chitosan-based hydrogel with self-adhesive, self-healing, stretchability, biocompatibility, and antibacterial and antioxidant properties through molecular design and structural regulation, which will enable the biomedical application of chitosan in emergency hemostasis, particularly in joints and extremities. STATEMENT OF SIGNIFICANCE: The design and preparation of multifunctional integrated green adhesive bio-hydrogels while avoiding the use of organic solvents and toxic chemical reagents has been an emerging challenge. Herein, a flexible chitosan-based hemostatic bio-hydrogel that integrates multifunctional properties was successfully synthesized. The bio-hydrogel displayed suitable stretchability (780%) and blood absorbability (1300% ± 50%). Moreover, the strong adhesion (68.5 kPa) ensured firm adherence of the assembled hydrogel on pigskin and on the bleeding wound site in both static and dynamic humid environments without shedding, thus providing a long service life. In addition, the designed hydrogel showed good compatibility and antibacterial performance. The dynamic Schiff base endowed the bio-hydrogel with excellent self-healing performance without any external stimuli.
Collapse
|
10
|
Florowska A, Florowski T, Sokołowska B, Adamczak L, Szymańska I. Effects of Pressure Level and Time Treatment of High Hydrostatic Pressure (HHP) on Inulin Gelation and Properties of Obtained Hydrogels. Foods 2021; 10:foods10112514. [PMID: 34828795 PMCID: PMC8619442 DOI: 10.3390/foods10112514] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/11/2021] [Revised: 10/15/2021] [Accepted: 10/15/2021] [Indexed: 11/25/2022] Open
Abstract
The aim of this study was the evaluation of the influence of different HHP levels (150 and 300 MPa) and time treatment (5, 10, 20 min) on the gelation and properties of hydrogels with different inulin concentration (15, 20, 25 g/100 g). High-pressure treatment, in tested ranges, induces inulin gels and allows obtaining gel structures even at a lowest tested inulin content (i.e., 15 g/100 g). Selecting the pressure parameters, it is possible to modify the characteristics of the created hydrogels. The use of higher pressure (i.e., 300 MPa) allows to increase the stability of the hydrogels and change their structure to more compressed, which results in higher yield stress, lower spreadability, harder and more adhesive structure. For example, increasing the inulin gelling induction pressure (concentration 20 g/100 g) from 150 to 300 MPa with a time treatment of 10 min resulted in an increase in yield stress from 38.1 to 711.7 Pa, spreadability force from 0.59 to 4.59 N, firmness from 0.11 to 1.46 N, and adhesiveness from −0.06 to −0.65 N. Extending the time treatment of HHP increases this effect, but mainly when higher pressure and a higher concentration of inulin are being used. For example, extension of time treatment at 300 MPa pressure from 5 to 20 min resulted in an increase in yield stress from 774.8 to 1273.8 Pa, spreadability force from 6.28 to 8.43 N, firmness from 1.87 to 2.98 N, and adhesiveness from −0.94 to −1.27 N. The obtained results indicate the possibility of using HHP to create inulin hydrogels tailored to the characteristics in a specific food product.
Collapse
Affiliation(s)
- Anna Florowska
- Institute of Food Sciences, Warsaw University of Life Sciences-SGGW, 159c Nowoursynowska Street, 02-787 Warsaw, Poland; (T.F.); (L.A.); (I.S.)
- Correspondence:
| | - Tomasz Florowski
- Institute of Food Sciences, Warsaw University of Life Sciences-SGGW, 159c Nowoursynowska Street, 02-787 Warsaw, Poland; (T.F.); (L.A.); (I.S.)
| | - Barbara Sokołowska
- Department of Microbiology, Prof. Wacław Dąbrowski Institute of Agricultural and Food Biotechnology—State Research Institute, 36 Rakowiecka Street, 02-532 Warsaw, Poland;
- Institute of High Pressure Physics of Polish Academy of Sciences, 29/37 Sokołowska Street, 01-142 Warsaw, Poland
| | - Lech Adamczak
- Institute of Food Sciences, Warsaw University of Life Sciences-SGGW, 159c Nowoursynowska Street, 02-787 Warsaw, Poland; (T.F.); (L.A.); (I.S.)
| | - Iwona Szymańska
- Institute of Food Sciences, Warsaw University of Life Sciences-SGGW, 159c Nowoursynowska Street, 02-787 Warsaw, Poland; (T.F.); (L.A.); (I.S.)
| |
Collapse
|
11
|
Abstract
Hydrogels are 3D crosslinked polymer matrices having a colossal tendency to imbibe water and exhibit swelling under physiological conditions without deformation in their hydrophilic network. Hydrogels being biodegradable and biocompatible, gained consideration due to some unique characteristics: responsiveness to external stimuli (pH, temperature) and swelling in aqueous solutions. Hydrogels offer a promising option for various pharmaceutical and biomedical applications, including tissue-specific drug delivery at a predetermined, controlled rate. This article presents a brief review of the recent and fundamental advances to design hydrogels, the swelling and deswelling mechanism, various crosslinking methods and their use as an intelligent carrier in the pharmaceutical field. Recent applications of hydrogels are also briefly discussed and exemplified.
Collapse
|
12
|
Fu PS, Wang JC, Lai PL, Liu SM, Chen YS, Chen WC, Hung CC. Effects of Gamma Radiation on the Sterility Assurance, Antibacterial Ability, and Biocompatibility of Impregnated Hydrogel Macrosphere Protein and Drug Release. Polymers (Basel) 2021; 13:938. [PMID: 33803715 PMCID: PMC8003089 DOI: 10.3390/polym13060938] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/17/2021] [Revised: 03/12/2021] [Accepted: 03/14/2021] [Indexed: 12/25/2022] Open
Abstract
Devices and medicines used in the medical field must be sterile. Gamma (γ)-irradiation is commonly used for sterilization because its high rate of penetration ensures uniform sterilization. To confirm that hydrogel macrosphere carriers inherit excellent liquid absorption with no cytotoxicity after γ-irradiation sterilization, investigating whether the physiochemical properties of hydrogel macrospheres differ before and after sterilization is essential. The present study evaluated the influence of the recommended 25-kGy γ-irradiation dose on the physicochemical characteristics and in vitro release of bovine serum albumin and vancomycin (an antibiotic medication) from alginate/gelatin with a w/w ratio of 1/4 crosslinking gel macrospheres. Gel macrosphere properties before and after sterilization were compared according to optical and scanning electron microscopy, infrared spectroscopy analysis, the amino residual crosslinking index, water absorption, degradation, sterility assurance, in vitro drug release, antibacterial ability, and cytotoxicity. The crosslinking index was almost unchanged; however, the γ-irradiation caused in situ hydrogel debonding and recrosslinking, which led to a decrease in the water absorption and increase in the degradation rate of the macrospheres after immersion. The release of gel macrospheres carrying vancomycin did not significantly affect antibacterial ability or biocompatibility after γ-irradiation. Accordingly, we conclude that γ-irradiation is suitable for macrospherical formulation.
Collapse
Affiliation(s)
- Po-Sung Fu
- School of Dentistry, College of Dental Medicine, Kaohsiung Medical University, Kaohsiung 807378, Taiwan; (P.-S.F.); (J.-C.W.)
- Department of Dentistry, Kaohsiung Municipal Ta-Tung Hospital, Kaohsiung 80145, Taiwan
| | - Jen-Chyan Wang
- School of Dentistry, College of Dental Medicine, Kaohsiung Medical University, Kaohsiung 807378, Taiwan; (P.-S.F.); (J.-C.W.)
- Division of Prosthodontics, Department of Dentistry, Kaohsiung Medical University Hospital, Kaohsiung 807378, Taiwan;
- Dental Medical Devices and Materials Research Center, College of Dental Medicine, Kaohsiung Medical University, Kaohsiung 807378, Taiwan
| | - Pei-Ling Lai
- Division of Prosthodontics, Department of Dentistry, Kaohsiung Medical University Hospital, Kaohsiung 807378, Taiwan;
| | - Shih-Ming Liu
- Advanced Medical Devices and Composites Laboratory, Department of Fiber and Composite Materials, Feng Chia University, Taichung 40724, Taiwan; (S.-M.L.); (Y.-S.C.)
| | - Ya-Shun Chen
- Advanced Medical Devices and Composites Laboratory, Department of Fiber and Composite Materials, Feng Chia University, Taichung 40724, Taiwan; (S.-M.L.); (Y.-S.C.)
| | - Wen-Cheng Chen
- Dental Medical Devices and Materials Research Center, College of Dental Medicine, Kaohsiung Medical University, Kaohsiung 807378, Taiwan
- Advanced Medical Devices and Composites Laboratory, Department of Fiber and Composite Materials, Feng Chia University, Taichung 40724, Taiwan; (S.-M.L.); (Y.-S.C.)
| | - Chun-Cheng Hung
- School of Dentistry, College of Dental Medicine, Kaohsiung Medical University, Kaohsiung 807378, Taiwan; (P.-S.F.); (J.-C.W.)
- Division of Prosthodontics, Department of Dentistry, Kaohsiung Medical University Hospital, Kaohsiung 807378, Taiwan;
- Dental Medical Devices and Materials Research Center, College of Dental Medicine, Kaohsiung Medical University, Kaohsiung 807378, Taiwan
| |
Collapse
|
13
|
Teixeira MO, Antunes JC, Felgueiras HP. Recent Advances in Fiber-Hydrogel Composites for Wound Healing and Drug Delivery Systems. Antibiotics (Basel) 2021; 10:248. [PMID: 33801438 PMCID: PMC8001440 DOI: 10.3390/antibiotics10030248] [Citation(s) in RCA: 28] [Impact Index Per Article: 9.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/29/2021] [Revised: 02/23/2021] [Accepted: 02/25/2021] [Indexed: 12/19/2022] Open
Abstract
In the last decades, much research has been done to fasten wound healing and target-direct drug delivery. Hydrogel-based scaffolds have been a recurrent solution in both cases, with some reaching already the market, even though their mechanical stability remains a challenge. To overcome this limitation, reinforcement of hydrogels with fibers has been explored. The structural resemblance of fiber-hydrogel composites to natural tissues has been a driving force for the optimization and exploration of these systems in biomedicine. Indeed, the combination of hydrogel-forming techniques and fiber spinning approaches has been crucial in the development of scaffolding systems with improved mechanical strength and medicinal properties. In this review, a comprehensive overview of the recently developed fiber-hydrogel composite strategies for wound healing and drug delivery is provided. The methodologies employed in fiber and hydrogel formation are also highlighted, together with the most compatible polymer combinations, as well as drug incorporation approaches creating stimuli-sensitive and triggered drug release towards an enhanced host response.
Collapse
Affiliation(s)
| | | | - Helena P. Felgueiras
- Centre for Textile Science and Technology (2C2T), Department of Textile Engineering, University of Minho, Campus of Azurém, 4800-058 Guimarães, Portugal; (M.O.T.); (J.C.A.)
| |
Collapse
|
14
|
Bakr RO, Amer RI, Attia D, Abdelhafez MM, Al-Mokaddem AK, El-Gendy AENG, El-Fishawy AM, Fayed MAA, Gad SS. In-vivo wound healing activity of a novel composite sponge loaded with mucilage and lipoidal matter of Hibiscus species. Biomed Pharmacother 2021; 135:111225. [PMID: 33434856 DOI: 10.1016/j.biopha.2021.111225] [Citation(s) in RCA: 17] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/10/2020] [Revised: 12/30/2020] [Accepted: 12/31/2020] [Indexed: 02/06/2023] Open
Abstract
Many researches have been undergone to hasten the natural wound healing process. In this study, several Hibiscus species (leaves) were extracted with petroleum ether, methanol, and their mucilage was separated. All the tested species extracts were assessed for their viability percentage using the water-soluble tetrazolium. H.syriacus was the plant of choice to be incorporated in a new drug delivery system and evaluated for its wound healing activity. H.syriacus petroleum ether extract (PEE) showed a high percentage of palmitic and oleic acids while its mucilage demonstrated high glucosamine and galacturonic acid. It was selected to be formulated and pharmaceutically evaluated into three different composite sponges using chitosan in various ratios. Fourier-transformed infrared spectroscopy investigated the chemical interaction between the utilized sponges' ingredients. Morphological characteristics were evaluated using scanning electron microscopy. H.syriacus composite sponge of mucilage: chitosan (1:5) was loaded with three different concentrations of PEE. Medicated formulations were assessed in rat model of excision wound model. The wound healing ability was clearly proved by the clinical acceleration, histopathological examination, and modulation of correlated inflammatory parameters as tumor necrosis factor in addition to vascular endothelial growth factor suggesting a promising valuable candidate that supports the management of excision wounds using single-dose preparation.
Collapse
Affiliation(s)
- Riham O Bakr
- Department of Pharmacognosy, Faculty of Pharmacy, October University for Modern Sciences and Arts (MSA), 11787, Giza, Egypt.
| | - Reham I Amer
- Department of Pharmaceutics and Industrial Pharmacy, Faculty of Pharmacy, Al-Azhar University, Cairo, Egypt; Department of Pharmaceutics, Faculty of Pharmacy, October University for Modern Sciences and Arts (MSA), Giza, Egypt
| | - Dalia Attia
- Department of Pharmaceutics and Pharmaceutical Technology, Faculty of Pharmacy, The British University in Egypt (BUE), Cairo, Egypt
| | - Mai M Abdelhafez
- Department of Pharmacology, Faculty of Pharmacy, October University for Modern Sciences and Arts (MSA), Giza, Egypt
| | - Asmaa K Al-Mokaddem
- Department of Pathology, Faculty of Veterinary Medicine, Cairo University, 12211 Giza, Egypt
| | - Abd El-Nasser G El-Gendy
- Department of Medicinal and Aromatic Plants Research, National Research Center, Giza, 12622, Egypt
| | - Ahlam M El-Fishawy
- Department of Pharmacognosy, Faculty of Pharmacy, Cairo University, 11562 Giza, Egypt
| | - Marwa A A Fayed
- Department of Pharmacognosy, Faculty of Pharmacy, University of Sadat City, 32897, Egypt
| | - Sameh S Gad
- Department of Pharmacology, Faculty of Pharmacy, October University for Modern Sciences and Arts (MSA), Giza, Egypt
| |
Collapse
|
15
|
Abbass MMS, El-Rashidy AA, Sadek KM, Moshy SE, Radwan IA, Rady D, Dörfer CE, Fawzy El-Sayed KM. Hydrogels and Dentin-Pulp Complex Regeneration: From the Benchtop to Clinical Translation. Polymers (Basel) 2020; 12:E2935. [PMID: 33316886 PMCID: PMC7763835 DOI: 10.3390/polym12122935] [Citation(s) in RCA: 41] [Impact Index Per Article: 10.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/22/2020] [Revised: 11/08/2020] [Accepted: 11/10/2020] [Indexed: 02/06/2023] Open
Abstract
Dentin-pulp complex is a term which refers to the dental pulp (DP) surrounded by dentin along its peripheries. Dentin and dental pulp are highly specialized tissues, which can be affected by various insults, primarily by dental caries. Regeneration of the dentin-pulp complex is of paramount importance to regain tooth vitality. The regenerative endodontic procedure (REP) is a relatively current approach, which aims to regenerate the dentin-pulp complex through stimulating the differentiation of resident or transplanted stem/progenitor cells. Hydrogel-based scaffolds are a unique category of three dimensional polymeric networks with high water content. They are hydrophilic, biocompatible, with tunable degradation patterns and mechanical properties, in addition to the ability to be loaded with various bioactive molecules. Furthermore, hydrogels have a considerable degree of flexibility and elasticity, mimicking the cell extracellular matrix (ECM), particularly that of the DP. The current review presents how for dentin-pulp complex regeneration, the application of injectable hydrogels combined with stem/progenitor cells could represent a promising approach. According to the source of the polymeric chain forming the hydrogel, they can be classified into natural, synthetic or hybrid hydrogels, combining natural and synthetic ones. Natural polymers are bioactive, highly biocompatible, and biodegradable by naturally occurring enzymes or via hydrolysis. On the other hand, synthetic polymers offer tunable mechanical properties, thermostability and durability as compared to natural hydrogels. Hybrid hydrogels combine the benefits of synthetic and natural polymers. Hydrogels can be biofunctionalized with cell-binding sequences as arginine-glycine-aspartic acid (RGD), can be used for local delivery of bioactive molecules and cellularized with stem cells for dentin-pulp regeneration. Formulating a hydrogel scaffold material fulfilling the required criteria in regenerative endodontics is still an area of active research, which shows promising potential for replacing conventional endodontic treatments in the near future.
Collapse
Affiliation(s)
- Marwa M. S. Abbass
- Oral Biology Department, Faculty of Dentistry, Cairo University, Cairo 11562, Egypt; (M.M.S.A.); (S.E.M.); (I.A.R.); (D.R.)
- Stem Cells and Tissue Engineering Research Group, Faculty of Dentistry, Cairo University, Cairo 11562, Egypt; (A.A.E.-R.); (K.M.S.)
| | - Aiah A. El-Rashidy
- Stem Cells and Tissue Engineering Research Group, Faculty of Dentistry, Cairo University, Cairo 11562, Egypt; (A.A.E.-R.); (K.M.S.)
- Biomaterials Department, Faculty of Dentistry, Cairo University, Cairo 11562, Egypt
| | - Khadiga M. Sadek
- Stem Cells and Tissue Engineering Research Group, Faculty of Dentistry, Cairo University, Cairo 11562, Egypt; (A.A.E.-R.); (K.M.S.)
- Biomaterials Department, Faculty of Dentistry, Cairo University, Cairo 11562, Egypt
| | - Sara El Moshy
- Oral Biology Department, Faculty of Dentistry, Cairo University, Cairo 11562, Egypt; (M.M.S.A.); (S.E.M.); (I.A.R.); (D.R.)
- Stem Cells and Tissue Engineering Research Group, Faculty of Dentistry, Cairo University, Cairo 11562, Egypt; (A.A.E.-R.); (K.M.S.)
| | - Israa Ahmed Radwan
- Oral Biology Department, Faculty of Dentistry, Cairo University, Cairo 11562, Egypt; (M.M.S.A.); (S.E.M.); (I.A.R.); (D.R.)
- Stem Cells and Tissue Engineering Research Group, Faculty of Dentistry, Cairo University, Cairo 11562, Egypt; (A.A.E.-R.); (K.M.S.)
| | - Dina Rady
- Oral Biology Department, Faculty of Dentistry, Cairo University, Cairo 11562, Egypt; (M.M.S.A.); (S.E.M.); (I.A.R.); (D.R.)
- Stem Cells and Tissue Engineering Research Group, Faculty of Dentistry, Cairo University, Cairo 11562, Egypt; (A.A.E.-R.); (K.M.S.)
| | - Christof E. Dörfer
- Clinic for Conservative Dentistry and Periodontology, School of Dental Medicine, Christian Albrechts University, 24105 Kiel, Germany;
| | - Karim M. Fawzy El-Sayed
- Stem Cells and Tissue Engineering Research Group, Faculty of Dentistry, Cairo University, Cairo 11562, Egypt; (A.A.E.-R.); (K.M.S.)
- Clinic for Conservative Dentistry and Periodontology, School of Dental Medicine, Christian Albrechts University, 24105 Kiel, Germany;
- Oral Medicine and Periodontology Department, Faculty of Dentistry, Cairo University, Cairo 11562, Egypt
| |
Collapse
|
16
|
Sharma S, Tiwari S. RETRACTED: A review on biomacromolecular hydrogel classification and its applications. Int J Biol Macromol 2020; 162:737-747. [PMID: 32553961 DOI: 10.1016/j.ijbiomac.2020.06.110] [Citation(s) in RCA: 106] [Impact Index Per Article: 26.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/08/2020] [Revised: 06/10/2020] [Accepted: 06/11/2020] [Indexed: 12/13/2022]
Abstract
This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editor-in-Chief and Author. The work included substantial parts copied without attribution from a prior work by Varaprasad et al (2017): https://doi.org/10.1016/j.msec.2017.05.096
Collapse
Affiliation(s)
- Swati Sharma
- Department of Chemistry, Institute of Science, Banaras Hindu University, Varanasi 221005, (UP), India.
| | - Shachi Tiwari
- Department of Chemistry, Institute of Science, Banaras Hindu University, Varanasi 221005, (UP), India
| |
Collapse
|
17
|
Bejan A, Doroftei F, Cheng X, Marin L. Phenothiazine-chitosan based eco-adsorbents: A special design for mercury removal and fast naked eye detection. Int J Biol Macromol 2020; 162:1839-1848. [PMID: 32745550 DOI: 10.1016/j.ijbiomac.2020.07.232] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/29/2020] [Revised: 07/22/2020] [Accepted: 07/22/2020] [Indexed: 12/16/2022]
Abstract
The aim of the paper was to investigate the ability of an eco-friendly luminescent xerogel prepared by chitosan crosslinking with a phenothiazine luminogen to detect and remove heavy metals. Its ability to give a divergent morphological and optical response towards fifteen environmental relevant metals was investigated by naked eye and UV lamp, fluorescence spectroscopy and scanning electron microscopy. A distinct response was noted for mercury, consisting in the transformation of the xerogel into a rubber-like material accompanied by the red shifting of the color of emitted light from yellow-green to greenish-yellow domain. The particularities of the metals anchoring into the xerogel were analyzed by FTIR spectroscopy and X-ray diffraction. The morphological changes and the metal uptake were analyzed by SEM-EDAX, swelling and gravimetric methods. It was concluded that mercury has a superior affinity towards this heteroatoms rich system, leading to a secondary crosslinking. This directed a great absorption capacity of 1673 mg/g and a specific morphological response for mercury ion concentrations up to 0.001 ppm.
Collapse
Affiliation(s)
- Andrei Bejan
- "Petru Poni" Institute of Macromolecular Chemistry of Romanian Academy, 41A Grigore Ghica Voda Alley, Iasi 700487, Romania
| | - Florica Doroftei
- "Petru Poni" Institute of Macromolecular Chemistry of Romanian Academy, 41A Grigore Ghica Voda Alley, Iasi 700487, Romania
| | - Xinjian Cheng
- School of Chemistry and Environmental Engineering, Wuhan Institute of Technology, Wuhan 430073, China.
| | - Luminita Marin
- "Petru Poni" Institute of Macromolecular Chemistry of Romanian Academy, 41A Grigore Ghica Voda Alley, Iasi 700487, Romania.
| |
Collapse
|
18
|
Gelatin-Based Hydrogels for the Controlled Release of 5,6-Dihydroxyindole-2-Carboxylic Acid, a Melanin-Related Metabolite with Potent Antioxidant Activity. Antioxidants (Basel) 2020; 9:antiox9030245. [PMID: 32197438 PMCID: PMC7139803 DOI: 10.3390/antiox9030245] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/27/2020] [Revised: 03/13/2020] [Accepted: 03/16/2020] [Indexed: 02/07/2023] Open
Abstract
The ability of gelatin-based hydrogels of incorporating and releasing under controlled conditions 5,6-dihydroxyindole-2-carboxylic acid (DHICA), a melanin-related metabolite endowed with marked antioxidant properties was investigated. The methyl ester of DHICA, MeDHICA, was also tested in view of its higher stability, and different solubility profile. Three types of gelatin-based hydrogels were prepared: pristine porcine skin type A gelatin (HGel-A), a pristine gelatin cross-linked by amide coupling of lysines and glutamic/aspartic acids (HGel-B), and a gelatin/chitosan blend (HGel-C). HGel-B and HGel-C differed in the swelling behavior, showed satisfactorily high mechanical strength at physiological temperatures and well-defined morphology. The extent of incorporation into all the gelatins tested using a 10% w/w indole to gelatin ratio was very satisfactory ranging from 60 to 90% for either indoles. The kinetics of indole release under conditions of physiological relevance was evaluated up to 72 h. The highest values were obtained with HGel-B and HGel-C for MeDHICA (90% after 6 h), and an appreciable release was observed for DHICA reaching 30% and 40% at 6 h for HGel-B and HGel-C, respectively. At 72 h, DHICA and MeDHICA were released at around 30% from HGel-A at pH 7.4, with an increase up to 40% at pH 5.5 in the case of DHICA. DHICA incorporated into HGel-B proved fairly stable over 6 h whereas the free compound at the same concentration was almost completely oxidized. The antioxidant power of the indole loaded gelatins was monitored by chemical assays and proved unaltered even after prolonged storage in air, suggesting that the materials could be prepared in advance with respect to their use without alteration of their efficacy.
Collapse
|
19
|
Chi H, Qiao Y, Wang B, Hou Y, Li Q, Li K, Liu Z. Swelling, thermal stability, antibacterial properties enhancement on composite hydrogel synthesized by chitosan-acrylic acid and ZnO nanowires. POLYM-PLAST TECH MAT 2019. [DOI: 10.1080/25740881.2018.1563138] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/27/2022]
Affiliation(s)
- Hongjin Chi
- School of Environmental and Chemical Engineering, Yanshan University, Qinhuangdao, Hebei, China
| | - Yu Qiao
- School of Environmental and Chemical Engineering, Yanshan University, Qinhuangdao, Hebei, China
| | - Bo Wang
- School of Environmental and Chemical Engineering, Yanshan University, Qinhuangdao, Hebei, China
| | - Yatong Hou
- School of Environmental and Chemical Engineering, Yanshan University, Qinhuangdao, Hebei, China
| | - Qiurong Li
- School of Environmental and Chemical Engineering, Yanshan University, Qinhuangdao, Hebei, China
| | - Kun Li
- School of Environmental and Chemical Engineering, Yanshan University, Qinhuangdao, Hebei, China
- Engineering Research Center of Functional Nucleic Acids in Qinhuangdao, Qinhuangdao, Hebei, China
| | - Zhiwei Liu
- School of Environmental and Chemical Engineering, Yanshan University, Qinhuangdao, Hebei, China
- Engineering Research Center of Functional Nucleic Acids in Qinhuangdao, Qinhuangdao, Hebei, China
| |
Collapse
|
20
|
Joseph J, Deshmukh K, Tung T, Chidambaram K, Khadheer Pasha SK. 3D Printing Technology of Polymer Composites and Hydrogels for Artificial Skin Tissue Implementations. LECTURE NOTES IN BIOENGINEERING 2019. [DOI: 10.1007/978-3-030-04741-2_7] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/06/2023]
|
21
|
Improvement of the surface wettability of silicone hydrogel films by self-assembled hydroxypropyltrimethyl ammonium chloride chitosan mixed colloids. Colloids Surf A Physicochem Eng Asp 2018. [DOI: 10.1016/j.colsurfa.2018.08.073] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
|
22
|
Rheological characterization of new thermosensitive hydrogels formed by chitosan, glycerophosphate, and phosphorylated β-cyclodextrin. Carbohydr Polym 2018; 201:471-481. [DOI: 10.1016/j.carbpol.2018.08.076] [Citation(s) in RCA: 22] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/28/2018] [Revised: 07/21/2018] [Accepted: 08/19/2018] [Indexed: 01/20/2023]
|
23
|
Qin H, Wang J, Wang T, Gao X, Wan Q, Pei X. Preparation and Characterization of Chitosan/β-Glycerophosphate Thermal-Sensitive Hydrogel Reinforced by Graphene Oxide. Front Chem 2018; 6:565. [PMID: 30555817 PMCID: PMC6282227 DOI: 10.3389/fchem.2018.00565] [Citation(s) in RCA: 45] [Impact Index Per Article: 7.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/29/2018] [Accepted: 10/31/2018] [Indexed: 02/05/2023] Open
Abstract
Thermal-sensitive hydrogel based on chitosan (CS) and β-glycerophosphate (GP) has shown good biocompatibility and biodegradability. But the application of such hydrogel is limited due to its poor mechanical property. Recently, graphene oxide(GO) is widely used as a reinforcement agent to prepare nanocomposites with different polymers for improving the properties of the materials. In this study, CS/GP-based hydrogels with different weight ratio of GO/CS (0.5, 1, 2%) were fabricated. The gelation time of the hydrogels at body temperature was evaluated by tube inverting method. The gelation process during heating was monitored by rheological measurement. The morphology, porosities, chemical structure, swelling properties of the lyophilized hydrogels were investigated by scanning electron microscopy, liquid displacement method, Fourier transform infrared spectroscopy and gravimetric method. Mechanical property of the hydrogels was analyzed by rheological measurement and unconfined compression test. MC3T3-E1 mouse pre-osteoblast cell line was used to assess the biological properties of the hydrogels. The results obtained from those assessments revealed that the addition of GO into CS/GP improved the properties of the prepared hydrogels without changing the high porous and interconnected microstructure and swelling ability of the hydrogels. The gelation time at body temperature was significantly reduced by nearly 20% with the addition of small amount of GO (0.5% weight ratio of CS). The mechanical properties of the hydrogels containing GO were improved significantly over that of CS/GP. The storage (G′)/loss (G″) moduli of the hydrogels with GO were 1.12 to 1.69 times that of CS/GP at the gelling temperature. The Young's modulus of 0.5%GO/CS/GP hydrogel is 1.76 times that of CS/GP. Moreover, the 0.5%GO/CS/GP hydrogel revealed remarkable biological affinity such as cellular attachment, viability and proliferation. All of these results suggest that 0.5%GO/CS/GP hydrogel has great potential for practical application in biomedical field.
Collapse
Affiliation(s)
- Han Qin
- State Key Laboratory of Oral Diseases, Department of Prosthodontics, National Clinical Research Center for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, China
| | - Jian Wang
- State Key Laboratory of Oral Diseases, Department of Prosthodontics, National Clinical Research Center for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, China
| | - Tong Wang
- State Key Laboratory of Oral Diseases, Department of Prosthodontics, National Clinical Research Center for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, China
| | - Xiaomeng Gao
- State Key Laboratory of Oral Diseases, Department of Prosthodontics, National Clinical Research Center for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, China
| | - Qianbing Wan
- State Key Laboratory of Oral Diseases, Department of Prosthodontics, National Clinical Research Center for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, China
| | - Xibo Pei
- State Key Laboratory of Oral Diseases, Department of Prosthodontics, National Clinical Research Center for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, China
| |
Collapse
|
24
|
Batista RA, Espitia PJP, Quintans JDSS, Freitas MM, Cerqueira MÂ, Teixeira JA, Cardoso JC. Hydrogel as an alternative structure for food packaging systems. Carbohydr Polym 2018; 205:106-116. [PMID: 30446085 DOI: 10.1016/j.carbpol.2018.10.006] [Citation(s) in RCA: 96] [Impact Index Per Article: 16.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/26/2018] [Revised: 09/16/2018] [Accepted: 10/02/2018] [Indexed: 12/17/2022]
Abstract
Hydrogels are three-dimensional, hydrophilic networks, comprising polymeric chains linked through physical or chemical bonds. In the area of food, hydrogels have great potential to be used in food packaging systems or as carriers of bioactive components. This paper reviews the nature of hydrogels, their 3D network conformation, their functional properties, and their potential applications in food packaging systems. Regarding their potential food packaging applications, hydrogels can present a conformation which allows their use as part of a packaging system to control the humidity generated by food products with high water content. Moreover, the incorporation of nanoparticles into hydrogels may grant them antimicrobial activity. Finally, although the current research in this field is still limited, the results obtained so far are promising for innovative and potential applications in the food field, which also include their integration into intelligent food packaging systems and their direct incorporation into food matrices as a flavor carrier system.
Collapse
Affiliation(s)
- Rejane Andrade Batista
- Tiradentes University, Northeast Biotechnology Network (PGP - RENORBIO) - Av. Murilo Dantas, 300, Farolândia, Aracaju, SE, 49032-490, Brazil
| | | | | | - Mayanna Machado Freitas
- Tiradentes University, Northeast Biotechnology Network (PGP - RENORBIO) - Av. Murilo Dantas, 300, Farolândia, Aracaju, SE, 49032-490, Brazil
| | - Miguel Ângelo Cerqueira
- International Iberian Nanotechnology Laboratory, Av. Mestre José Veiga s/n, 4715-330 Braga, Portugal.
| | - José António Teixeira
- Center of Biological Engineering, Universidade do Minho, Campus de Gualtar, 4710-057 Braga, Portugal.
| | - Juliana Cordeiro Cardoso
- Tiradentes University, Northeast Biotechnology Network (PGP - RENORBIO) - Av. Murilo Dantas, 300, Farolândia, Aracaju, SE, 49032-490, Brazil; Institute of Technology and Research - Av. Murilo Dantas, 300, Farolândia, Aracaju, SE, 49032-490, Brazil.
| |
Collapse
|
25
|
Physical, antibacterial and antioxidant properties of chitosan films containing hardleaf oatchestnut starch and Litsea cubeba oil. Int J Biol Macromol 2018; 118:707-715. [DOI: 10.1016/j.ijbiomac.2018.06.126] [Citation(s) in RCA: 27] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/27/2018] [Revised: 06/19/2018] [Accepted: 06/25/2018] [Indexed: 12/22/2022]
|
26
|
In vitro and In vivo characterization of quercetin loaded multiphase hydrogel for wound healing application. Int J Biol Macromol 2018; 115:1211-1217. [DOI: 10.1016/j.ijbiomac.2018.05.010] [Citation(s) in RCA: 45] [Impact Index Per Article: 7.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/08/2017] [Revised: 04/25/2018] [Accepted: 05/02/2018] [Indexed: 11/22/2022]
|
27
|
Chen Y, Mu X, Wang F. Preparation and Drug Release of PVA Composite Nanofibers Loaded Chitosan Microsphere. POLYMER SCIENCE SERIES A 2018. [DOI: 10.1134/s0965545x18030112] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
|
28
|
Skwarczynska A, Kaminska M, Owczarz P, Bartoszek N, Walkowiak B, Modrzejewska Z. The structural (FTIR, XRD, and XPS) and biological studies of thermosensitive chitosan chloride gels with β-glycerophosphate disodium. J Appl Polym Sci 2018. [DOI: 10.1002/app.46459] [Citation(s) in RCA: 15] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
Affiliation(s)
- Agata Skwarczynska
- Department of Civil, Environmental Engineering and Architecture; Rzeszow University of Technology, Powstancow Warszawy 6; Rzeszow 35-959 Poland
| | - Marta Kaminska
- Institute of Materials Science and Engineering, Lodz University of Technology, Stefanowskiego 1/15; Lodz 90-924 Poland
| | - Piotr Owczarz
- Faculty of Process and Environmental Engineering; Lodz University of Technology, Wolczanska 175; Lodz 90-924 Poland
| | - Nina Bartoszek
- BioNanoPark Laboratories of Lodz Regional Park of Science and Technology, Dubois 144; Lodz 93-465 Poland
| | - Bogdan Walkowiak
- Institute of Materials Science and Engineering, Lodz University of Technology, Stefanowskiego 1/15; Lodz 90-924 Poland
- BioNanoPark Laboratories of Lodz Regional Park of Science and Technology, Dubois 144; Lodz 93-465 Poland
| | | |
Collapse
|
29
|
Huang Y, Peng G, Chen B, Yong P, Yao N, Yang L, Pirraco RP, Reis RL, Chen J. Preparation and characteristics of the sulfonated chitosan derivatives electrodeposited onto 316l stainless steel surface. JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION 2017; 29:236-256. [DOI: 10.1080/09205063.2017.1409047] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/18/2022]
Affiliation(s)
- Ye Huang
- Department of Chemical Engineering and Technology, School of Environmental and Chemical Engineering, Shanghai University, Shanghai, P. R. China
| | - Guangjia Peng
- Department of Chemical Engineering and Technology, School of Environmental and Chemical Engineering, Shanghai University, Shanghai, P. R. China
| | - Bin Chen
- Department of Chemical Engineering and Technology, School of Environmental and Chemical Engineering, Shanghai University, Shanghai, P. R. China
| | - Ping Yong
- Department of Chemical Engineering and Technology, School of Environmental and Chemical Engineering, Shanghai University, Shanghai, P. R. China
| | - Nan Yao
- Department of Chemical Engineering and Technology, School of Environmental and Chemical Engineering, Shanghai University, Shanghai, P. R. China
| | - Liming Yang
- Department of Chemical Engineering and Technology, School of Environmental and Chemical Engineering, Shanghai University, Shanghai, P. R. China
| | - Rogério P. Pirraco
- 3B’s Research Group – Biomaterials, Biodegradables and Biomimetics, University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, Guimarães, Portugal
| | - Rui L. Reis
- ICVS/3B’s – PT Government Associate Laboratory, Guimarães, Portugal
| | - Jie Chen
- Department of Chemical Engineering and Technology, School of Environmental and Chemical Engineering, Shanghai University, Shanghai, P. R. China
| |
Collapse
|
30
|
Recent advances in smart biotechnology: Hydrogels and nanocarriers for tailored bioactive molecules depot. Adv Colloid Interface Sci 2017; 249:163-180. [PMID: 28527520 DOI: 10.1016/j.cis.2017.05.009] [Citation(s) in RCA: 33] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/15/2017] [Revised: 05/06/2017] [Accepted: 05/08/2017] [Indexed: 12/18/2022]
Abstract
Over the past ten years, the global biopharmaceutical market has remarkably grown, with ten over the top twenty worldwide high performance medical treatment sales being biologics. Thus, biotech R&D (research and development) sector is becoming a key leading branch, with expanding revenues. Biotechnology offers considerable advantages compared to traditional therapeutic approaches, such as reducing side effects, specific treatments, higher patient compliance and therefore more effective treatments leading to lower healthcare costs. Within this sector, smart nanotechnology and colloidal self-assembling systems represent pivotal tools able to modulate the delivery of therapeutics. A comprehensive understanding of the processes involved in the self-assembly of the colloidal structures discussed therein is essential for the development of relevant biomedical applications. In this review we report the most promising and best performing platforms for specific classes of bioactive molecules and related target, spanning from siRNAs, gene/plasmids, proteins/growth factors, small synthetic therapeutics and bioimaging probes.
Collapse
|
31
|
Varaprasad K, Raghavendra GM, Jayaramudu T, Yallapu MM, Sadiku R. A mini review on hydrogels classification and recent developments in miscellaneous applications. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2017. [DOI: 10.1016/j.msec.2017.05.096] [Citation(s) in RCA: 171] [Impact Index Per Article: 24.4] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/22/2022]
|
32
|
Yao Y, Xia M, Wang H, Li G, Shen H, Ji G, Meng Q, Xie Y. Preparation and evaluation of chitosan-based nanogels/gels for oral delivery of myricetin. Eur J Pharm Sci 2016; 91:144-53. [DOI: 10.1016/j.ejps.2016.06.014] [Citation(s) in RCA: 45] [Impact Index Per Article: 5.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/10/2016] [Revised: 06/06/2016] [Accepted: 06/17/2016] [Indexed: 11/27/2022]
|
33
|
Segale L, Giovannelli L, Mannina P, Pattarino F. Calcium Alginate and Calcium Alginate-Chitosan Beads Containing Celecoxib Solubilized in a Self-Emulsifying Phase. SCIENTIFICA 2016; 2016:5062706. [PMID: 27127680 PMCID: PMC4834166 DOI: 10.1155/2016/5062706] [Citation(s) in RCA: 42] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/04/2015] [Revised: 02/25/2016] [Accepted: 03/09/2016] [Indexed: 06/05/2023]
Abstract
In this work alginate and alginate-chitosan beads containing celecoxib solubilized into a self-emulsifying phase were developed in order to obtain a drug delivery system for oral administration, able to delay the drug release in acidic environment and to promote it in the intestinal compartment. The rationale of this work was linked to the desire to improve celecoxib therapeutic effectiveness reducing its gastric adverse effects and to favor its use in the prophylaxis of colon cancer and as adjuvant in the therapy of familial polyposis. The systems were prepared by ionotropic gelation using needles with different diameters (400 and 600 μm). Morphology, particle size, swelling behavior, and in vitro drug release performance of the beads in aqueous media with different pH were investigated. The experimental results demonstrated that the presence of chitosan in the formulation caused an increase of the mechanical resistance of the bead structure and, as a consequence, a limitation of the bead swelling ability and a decrease of the drug release rate at neutral pH. Alginate-chitosan beads could be a good tool to guarantee a celecoxib colon delivery.
Collapse
Affiliation(s)
- Lorena Segale
- Dipartimento di Scienze del Farmaco, Università del Piemonte Orientale, Largo Donegani 2, 28100 Novara, Italy
| | - Lorella Giovannelli
- Dipartimento di Scienze del Farmaco, Università del Piemonte Orientale, Largo Donegani 2, 28100 Novara, Italy
| | - Paolo Mannina
- Dipartimento di Scienze del Farmaco, Università del Piemonte Orientale, Largo Donegani 2, 28100 Novara, Italy
| | - Franco Pattarino
- Dipartimento di Scienze del Farmaco, Università del Piemonte Orientale, Largo Donegani 2, 28100 Novara, Italy
| |
Collapse
|
34
|
Kim C, Park KS, Kang SM, Kim J, Song Y, Lee CS. Comparison of Pectin Hydrogel Collection Methods in Microfluidic Device. KOREAN CHEMICAL ENGINEERING RESEARCH 2015. [DOI: 10.9713/kcer.2015.53.6.740] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
|
35
|
Chen L, Liu K, Ye JR, Shen Q. Controlled formation of surface hydrophilicity enhanced chitosan film by layer-by-layer electro-assembly. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2015; 56:518-21. [DOI: 10.1016/j.msec.2015.07.021] [Citation(s) in RCA: 14] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/19/2015] [Revised: 05/06/2015] [Accepted: 07/10/2015] [Indexed: 01/22/2023]
|
36
|
Sa Y, Wang M, Deng H, Wang Y, Jiang T. Beneficial effects of biomimetic nano-sized hydroxyapatite/antibiotic gentamicin enriched chitosan–glycerophosphate hydrogel on the performance of injectable polymethylmethacrylate. RSC Adv 2015. [DOI: 10.1039/c5ra15915f] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/11/2022] Open
Abstract
Preparation and characterization and injectable p-PMMA/CS-GP/nano-HA/GM cements.
Collapse
Affiliation(s)
- Yue Sa
- The State Key Laboratory Breeding Base of Basic Science of Stomatology (Hubei-MOST) & Key Laboratory of Oral Biomedicine Ministry of Education
- School & Hospital of Stomatology
- Wuhan University
- Wuhan 430079
- PR China
| | - Man Wang
- The State Key Laboratory Breeding Base of Basic Science of Stomatology (Hubei-MOST) & Key Laboratory of Oral Biomedicine Ministry of Education
- School & Hospital of Stomatology
- Wuhan University
- Wuhan 430079
- PR China
| | - Hongbing Deng
- Department of Environmental Science
- College of Resource and Environmental Science
- Wuhan University
- Wuhan 430079
- PR China
| | - Yining Wang
- The State Key Laboratory Breeding Base of Basic Science of Stomatology (Hubei-MOST) & Key Laboratory of Oral Biomedicine Ministry of Education
- School & Hospital of Stomatology
- Wuhan University
- Wuhan 430079
- PR China
| | - Tao Jiang
- The State Key Laboratory Breeding Base of Basic Science of Stomatology (Hubei-MOST) & Key Laboratory of Oral Biomedicine Ministry of Education
- School & Hospital of Stomatology
- Wuhan University
- Wuhan 430079
- PR China
| |
Collapse
|
37
|
Mayet N, Kumar P, Choonara YE, Tomar LK, Tyagi C, du Toit LC, Pillay V. Synthesis of a semi-interpenetrating polymer network as a bioactive curcumin film. AAPS PharmSciTech 2014; 15:1476-89. [PMID: 24984920 PMCID: PMC4245434 DOI: 10.1208/s12249-014-0170-3] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/17/2014] [Accepted: 06/09/2014] [Indexed: 01/23/2023] Open
Abstract
This study focused on the synthesis and characterization of a natural polymeric system employing the interpenetrating polymer network (IPN) comprising curcumin as a bioactive. Biopolymers and actives such as chitosan, hypromellose, citric acid, genipin, and curcumin were used to develop an effective, biodegradable, and biocompatible film employed therapeutically as a wound healing platform. The semi-IPN films were investigated for their physicochemical, physicomechanical, and biological properties by quantification by FTIR, DSC, and Young's modulus. Following characterization, an optimum candidate formulation was produced whereby further in vitro and ex vivo studies were performed. Results revealed a burst release occurring at the first hour with 1.1 mg bioactive released when in contact with the dissolution medium and 2.23 mg due to bioactive permeation through the skin, thus suggesting that the lipophilic nature of skin greatly impacted the bioactive release rate. Furthermore, chemical and mechanical characterization and tensile strength analysis revealed that the degree of crosslinking and concentration of polymeric material used significantly influenced the properties of the film.
Collapse
Affiliation(s)
- Naeema Mayet
- Wits Advanced Drug Delivery Platform Research Unit, Department of Pharmacy and Pharmacology, School of Therapeutic Sciences, Faculty of Health Sciences, University of the Witwatersrand, 7 York Road, Parktown, Johannesburg, 2193 South Africa
| | - Pradeep Kumar
- Wits Advanced Drug Delivery Platform Research Unit, Department of Pharmacy and Pharmacology, School of Therapeutic Sciences, Faculty of Health Sciences, University of the Witwatersrand, 7 York Road, Parktown, Johannesburg, 2193 South Africa
| | - Yahya E. Choonara
- Wits Advanced Drug Delivery Platform Research Unit, Department of Pharmacy and Pharmacology, School of Therapeutic Sciences, Faculty of Health Sciences, University of the Witwatersrand, 7 York Road, Parktown, Johannesburg, 2193 South Africa
| | - Lomas K. Tomar
- Wits Advanced Drug Delivery Platform Research Unit, Department of Pharmacy and Pharmacology, School of Therapeutic Sciences, Faculty of Health Sciences, University of the Witwatersrand, 7 York Road, Parktown, Johannesburg, 2193 South Africa
| | - Charu Tyagi
- Wits Advanced Drug Delivery Platform Research Unit, Department of Pharmacy and Pharmacology, School of Therapeutic Sciences, Faculty of Health Sciences, University of the Witwatersrand, 7 York Road, Parktown, Johannesburg, 2193 South Africa
| | - Lisa C. du Toit
- Wits Advanced Drug Delivery Platform Research Unit, Department of Pharmacy and Pharmacology, School of Therapeutic Sciences, Faculty of Health Sciences, University of the Witwatersrand, 7 York Road, Parktown, Johannesburg, 2193 South Africa
| | - Viness Pillay
- Wits Advanced Drug Delivery Platform Research Unit, Department of Pharmacy and Pharmacology, School of Therapeutic Sciences, Faculty of Health Sciences, University of the Witwatersrand, 7 York Road, Parktown, Johannesburg, 2193 South Africa
| |
Collapse
|
38
|
Glycerophosphate-based chitosan thermosensitive hydrogels and their biomedical applications. Carbohydr Polym 2014; 117:524-536. [PMID: 25498667 DOI: 10.1016/j.carbpol.2014.09.094] [Citation(s) in RCA: 240] [Impact Index Per Article: 24.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/07/2014] [Revised: 09/24/2014] [Accepted: 09/25/2014] [Indexed: 11/23/2022]
Abstract
Chitosan is non-toxic, biocompatible and biodegradable polysaccharide composed of glucosamine and derived by deacetylation of chitin. Chitosan thermosensitive hydrogel has been developed to form a gel in situ, precluding the need for surgical implantation. In this review, the recent advances in chitosan thermosensitive hydrogels based on different glycerophosphate are summarized. The hydrogel is prepared with chitosan and β-glycerophosphate or αβ-glycerophosphate which is liquid at room temperature and transits into gel as temperature increases. The gelation mechanism may involve multiple interactions between chitosan, glycerophosphate, and water. The solution behavior, rheological and physicochemical properties, and gelation process of the hydrogel are affected not only by the molecule weight, deacetylation degree, and concentration of chitosan, but also by the kind and concentration of glycerophosphate. The properties and the three-dimensional networks of the hydrogel offer them wide applications in biomedical field including local drug delivery and tissue engineering.
Collapse
|
39
|
Ghasemi Tahrir F, Ganji F, Mani AR, Khodaverdi E. In vitro and in vivo evaluation of thermosensitive chitosan hydrogel for sustained release of insulin. Drug Deliv 2014; 23:1038-46. [DOI: 10.3109/10717544.2014.932861] [Citation(s) in RCA: 29] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/13/2022] Open
Affiliation(s)
| | - Fariba Ganji
- Biomedical Engineering Group, Department of Chemical Engineering,
| | - Ali Reza Mani
- Department of Physiology, Tarbiat Modares University, Tehran, Iran, and
| | - Elham Khodaverdi
- Pharmaceutical Research Center, School of Pharmacy, Mashhad University of Medical Sciences, Mashhad, Iran
| |
Collapse
|
40
|
Sirousazar M, Forough M, Farhadi K, Shaabani Y, Molaei R. Hydrogels: Properties, Preparation, Characterization and Biomedical, Applications in Tissue Engineering, Drug, Delivery and Wound Care. Adv Healthc Mater 2014. [DOI: 10.1002/9781118774205.ch9] [Citation(s) in RCA: 14] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
|
41
|
Preparation and characteristics of sodium alginate/Na+rectorite-g-itaconic acid/acrylamide hydrogel films. Carbohydr Polym 2014; 105:351-8. [DOI: 10.1016/j.carbpol.2014.01.043] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/24/2013] [Accepted: 01/12/2014] [Indexed: 11/22/2022]
|
42
|
Ye JR, Chen L, Zhang Y, Zhang QC, Shen Q. Turning the chitosan surface from hydrophilic to hydrophobic by layer-by-layer electro-assembly. RSC Adv 2014. [DOI: 10.1039/c4ra10327k] [Citation(s) in RCA: 28] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
By employing an electrostatic generator to enhance or reduce the van der Waals force in a novel layer-by-layer electro-assembly process, this work proves that the chitosan surface can be prepared with tunable wettability, e.g. from hydrophilic to hydrophobic.
Collapse
Affiliation(s)
- Jia-Ru Ye
- State Key Laboratory for Modification of Chemical Fiber and Polymer Materials
- Polymer Department of Donghua University
- Shanghai, China
| | - Li Chen
- State Key Laboratory for Modification of Chemical Fiber and Polymer Materials
- Polymer Department of Donghua University
- Shanghai, China
| | - Yi Zhang
- State Key Laboratory for Modification of Chemical Fiber and Polymer Materials
- Polymer Department of Donghua University
- Shanghai, China
| | - Qi-Chen Zhang
- State Key Laboratory for Modification of Chemical Fiber and Polymer Materials
- Polymer Department of Donghua University
- Shanghai, China
| | - Qing Shen
- State Key Laboratory for Modification of Chemical Fiber and Polymer Materials
- Polymer Department of Donghua University
- Shanghai, China
| |
Collapse
|
43
|
Enhanced mechanical properties of thermosensitive chitosan hydrogel by silk fibers for cartilage tissue engineering. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2013; 33:4786-94. [DOI: 10.1016/j.msec.2013.07.043] [Citation(s) in RCA: 180] [Impact Index Per Article: 16.4] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/16/2013] [Revised: 07/12/2013] [Accepted: 07/29/2013] [Indexed: 02/06/2023]
|
44
|
Park SJ, Li Z, Hwang IN, Huh KM, Min KS. Glycol chitin-based thermoresponsive hydrogel scaffold supplemented with enamel matrix derivative promotes odontogenic differentiation of human dental pulp cells. J Endod 2013; 39:1001-7. [PMID: 23880267 DOI: 10.1016/j.joen.2013.04.021] [Citation(s) in RCA: 25] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/31/2012] [Revised: 03/18/2013] [Accepted: 04/03/2013] [Indexed: 01/09/2023]
Abstract
INTRODUCTION Hydrogels have been widely studied as tissue engineering scaffolds over the past 2 decades because of their favorable biological properties. Recently, a new biodegradable glycol chitin-based thermoresponsive hydrogel scaffold (GC-TRS) was developed that can be easily applied as a mild viscous solution at room temperature but quickly transforms into a durable hydrogel under physiological conditions. The aim of this study was to investigate the effects of GC-TRS on the proliferation and odontogenic differentiation of colony-forming human dental pulp cells (hDPCs) in the presence of enamel matrix derivative. METHODS Glycol chitin was synthesized by N-acetylation of glycol chitosan. The morphology of the thermoresponsive hydrogel scaffold was observed by using scanning electron microscopy. The sol gel phase transition of the aqueous solution of glycol chitin was investigated by using the tilting method and rheometer studies. hDPCs were isolated based on their ability to generate clonogenic adherent cell clusters. The effect of GC-TRS and collagen on cell viability was examined by performing 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Expression of markers for odontogenic/osteogenic differentiation (ie, dentin sialophosphoprotein, dentin matrix protein-1, osteonectin, and osteopontin) was analyzed by performing real-time polymerase chain reaction. RESULTS GC-TRS exhibited a highly macroporous and well-interconnected porous structure. The polymer solution existed in a mildly viscous sol state, but it transitioned to a gel state and did not flow above approximately 37°C. Rheometer studies showed that the glycol chitin solution exhibited a fast sol gel transition approximately at body temperature. GC-TRS and collagen did not inhibit cell viability until 7 days. Dentin sialophosphoprotein and dentin matrix protein-1 were expressed by cells cultured in GC-TRS at a higher level than that in cells cultured in collagen (P < .05). In both the scaffold groups, dentin sialophosphoprotein, dentin matrix protein-1, and osteopontin messenger RNA was up-regulated significantly in EMD-treated hDPCs when compared with the nontreated cells (P < .05). CONCLUSIONS GC-TRS allowed the proliferation and odontogenic differentiation of hDPCs. Furthermore, the differentiation was facilitated by EMD. These results suggest that GC-TRS has the potential to be used in tissue engineering techniques for dentin regeneration.
Collapse
Affiliation(s)
- Su-Jung Park
- Department of Conservative Dentistry, Wonkwang University School of Dentistry, Iksan, Korea
| | | | | | | | | |
Collapse
|
45
|
Preparation and characterization of mucilage polysaccharide for biomedical applications. Carbohydr Polym 2013; 98:89-94. [PMID: 23987320 DOI: 10.1016/j.carbpol.2013.04.062] [Citation(s) in RCA: 74] [Impact Index Per Article: 6.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/13/2013] [Revised: 04/05/2013] [Accepted: 04/17/2013] [Indexed: 11/21/2022]
Abstract
In the present investigation, the polysaccharide/mucilage from waste of Abelmoscus esculentus by modification in hot extraction using two different solvents (Acetone, Methanol) were extracted, characterized and further compared with seaweed polysaccharide for their potential applications. The percentage yield, emulsifying capacity and swelling index of this mucilage were determined. The macro algae and okra waste, gave high % yield (22.2% and 8.6% respectively) and good emulsifying capacity (EC%=52.38% and 54.76% respectively) with acetone, compared to methanol (11.3% and 0.28%; EC%=50%) (PH=7) while swelling index was greater with methanol than acetone extracts respectively. The infrared (I.R.) spectrum of the samples was recorded to investigate the chemical structure of mucilage. Thermal analysis of the mucilage was done with TGA (Thermal Gravimetric Analyzer) and DSC (Differential Scanning Calorimeter) which showed both okra and algal polysaccharide were thermostable hydrogels.
Collapse
|
46
|
Munro NH, McGrath KM. How important is polyelectrolyte complex formation in biomimetic mineralisation? Manipulation via alcohol addition. Dalton Trans 2013; 42:8259-69. [PMID: 23595573 DOI: 10.1039/c3dt50299f] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Understanding the formation of biominerals like nacre can lead to the fabrication of more advanced biomimetic materials. Several factors are known to influence the final form of both native nacre and biomimetic synthetic variants. Two important components in calcium carbonate biominerals such as nacre are the organic scaffold and the acidic proteins. Interactions between these two components may also influence final composite characteristics. In this investigation chitosan hydrogels were prepared from acidic aqueous solution using four alcohols as cosolvents. The addition of alcohol enables direct modification of the network of the chitosan hydrogel (and thereby the nanometre and micrometre length-scale structure of the hydrogel). Both alcohol-modified chitosan and subsequently reacetylated chitin scaffolds were then mineralised with a combined soaking mineralisation method in the presence of poly(acrylic acid), the latter of which mimics the role of the acidic proteins in the native system. The effects of these structural variations of the hydrogel, induced by the presence of alcohol during fabrication, on (1) the formation of a polyelectrolyte complex between the chitosan or chitin and the poly(acrylic acid) and (2) the subsequent polymorph and morphology of calcium carbonate crystals mineralised within the hydrogel scaffold were investigated. Increasing the amount of the alcohols 1,2-propanediol or 1,3-propanediol led to increased disruption of the hydrogen bonding of the hydrogel scaffold and significant changes to, or reduced formation of, the polyelectrolyte complex formed between the scaffold carbohydrate and the poly(acrylic acid). The disruption of the polyelectrolyte complex in turn led to a loss of control over which polymorph of calcium carbonate is nucleated. These results show that the physical form of the polymer scaffold in these organic/inorganic composites, and the formation of the polyelectrolyte complex play a crucial role in determining the final composite structure and the calcium carbonate polymorphs and morphologies.
Collapse
Affiliation(s)
- Natasha H Munro
- MacDiarmid Institute for Advanced Materials and Nanotechnology, School of Chemical and Physical Sciences, Victoria University of Wellington, PO Box 600, Wellington, New Zealand
| | | |
Collapse
|
47
|
Xin S, Li X, Ma Z, Lei Z, Zhao J, Pan S, Zhou X, Deng H. Cytotoxicity and antibacterial ability of scaffolds immobilized by polysaccharide/layered silicate composites. Carbohydr Polym 2013; 92:1880-6. [DOI: 10.1016/j.carbpol.2012.11.040] [Citation(s) in RCA: 25] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/17/2012] [Revised: 08/30/2012] [Accepted: 11/14/2012] [Indexed: 11/30/2022]
|
48
|
He G, Wang Z, Zheng H, Yin Y, Xiong X, Lin R. Preparation, characterization and properties of aminoethyl chitin hydrogels. Carbohydr Polym 2012; 90:1614-9. [DOI: 10.1016/j.carbpol.2012.07.040] [Citation(s) in RCA: 18] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/12/2011] [Revised: 07/10/2012] [Accepted: 07/12/2012] [Indexed: 11/27/2022]
|
49
|
de Oliveira V, de Morais W, Pereira M, Fonseca J. Dynamic light scattering in semidilute and concentrated chitosan solutions. Eur Polym J 2012. [DOI: 10.1016/j.eurpolymj.2012.07.017] [Citation(s) in RCA: 18] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/25/2022]
|
50
|
Nanofibrous mats layer-by-layer assembled via electrospun cellulose acetate and electrosprayed chitosan for cell culture. Eur Polym J 2012. [DOI: 10.1016/j.eurpolymj.2012.08.001] [Citation(s) in RCA: 63] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
|