Novel chitosan membranes as support for lipases immobilization: Characterization aspects

Hydrogel Films with Impact Resistance by Sacrificial Micelle-Assisted-Alignment

Various strategies are developed to engineer aligned hierarchical architectures in polymer hydrogels for enhanced mechanical performance. However, chain alignment remains impeded by the presence of hydrogen bonds between adjacent chains. Herein, a facile sacrificial micelle-assisted-alignment strategy is proposed, leading to well-aligned, strong and tough pure chitosan hydrogels. The sacrificial sodium dodecyl sulfate micelles electrostatically interact with the protonated chitosan chains, enabling chain sliding and alignment under uniaxial forces. Subsequently, sacrificial micelles can be easily removed via NaOH treatment, causing the reforming of H-bond in the chain networks. The strength of the pure chitosan hydrogels increases 140-fold, reaching 58.9 ± 3.4 MPa; the modulus increases 595-fold, reaching 226.4 ± 42.8 MPa. After drying-rehydration, the strength and modulus further rise to 70.3 ± 2.4 and 403.5 ± 76.3 MPa, marking a significant advancement in high-strength pure chitosan hydrogel films. Furthermore, the designed multiscale architectures involving enhanced crystallinity, well-aligned fibers, strong interfaces, robust multilayer Bouligand assembly contribute to the exact replica of lobster underbelly with impact resistance up to 6.8 ± 1.0 kJ m-1. This work presents a promising strategy for strong, tough, stiff and impact-resistant polymer hydrogels via well-aligned hierarchical design.

Physicochemical characterization and therapeutic potential of ink from squid, Sepioteuthis lessoniana

In the current study, the squid, Sepioteuthis lessoniana ink was used as a raw material. It summarizes physicochemical, elemental, and spectral properties (UV/Visible spectroscopy and FT-IR) of crude ink, whereas the biochemical analysis was performed with crude ink (CI) as well as melanin-free ink (MFI). The percentage yield was analyzed using various solvent extracts of CI and MFI. GC-MS was performed for the chemical constituents of the methanolic extract of ink. Furthermore, the methanolic extract was subjected to various biological applications. The physicochemical analysis defines the presence of moisture, ash, extractive value, solubility, and thermal stability of CI. The biochemical analysis reveals protein, lipid, and carbohydrate of 2.5, 2.2, and 2.37 mg/ml for CI and 2.8, 3.7, and 4.51 mg/ml for MFI respectively. The extract showed the highest zone of inhibition at 100 μg/ml. The antioxidant activity reveals the highest percentage of radical-scavenging activity in nitric oxide (NO) (89%), and total antioxidant capacity (TAC) assay showed the highest inhibition activity of 0.41 nm at 100 µg/ml. The cytotoxic ability of methanolic extract against MDA-MB-231 breast cancer cell line revealed an IC50 value of 10.13 μg/ml. Toxicity assay showed increased mortality of Artemia nauplii at higher concentrations (1000 ppm/40%) of extract. These findings indicate that S. lessoniana ink is a novel prospective product that needs to be characterized in order to increase its pharmacological activity.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-023-03830-6.

Impact of immobilization strategies on the activity and recyclability of lipases in nanomagnetic supports

The use of enzymes immobilized on nanomagnetic supports has produced surprising results in catalysis, mainly due to the increase in surface area and the potential for recovery and reuse. However, the meticulous control of the process and difficulties in reproducibility have made industrial-scale applications unfeasible. Furthermore, the role of conjugation strategies in the catalytic activity and recycling of catalysts is unclear. Therefore, the objective of this study was to compare the conjugation of enzymes on nanomagnetic supports through physical adsorption (naked) or covalent bonding with mercaptopropyltrimethoxysilane (MPTS) and aminopropyltriethoxysilane (APTS) ligands. The free lipase obtained from Rhizomucor miehei was used as a model enzyme. Total protein and enzyme activity were determined using spectrophotometry (UV-Vis) and the p-nitrophenyl palmitate (p-NPP) hydrolysis method. The results indicated that a more significant enzyme surface loading does not always mean better immobilization success. The physical adsorption binding strategy had higher surface loading and low catalytic activity. On the other hand, covalent coupling with free NH2 had an excellent catalytic activity with very low surface loading. Finally, we show that recyclability can be improved with conjugation mediated by disulfide bonds. The findings presented here are essential for developing nanoconjugates with high enzymatic activity, which can guarantee the success of several industrial applications.

Challenges and Recent Advances in Enzyme-Mediated Wastewater Remediation-A Review

Different classes of artificial pollutants, collectively called emerging pollutants, are detected in various water bodies, including lakes, rivers, and seas. Multiple studies have shown the devastating effects these emerging pollutants can have on human and aquatic life. The main reason for these emerging pollutants in the aquatic environment is their incomplete removal in the existing wastewater treatment plants (WWTPs). Several additional treatments that could potentially supplement existing WWTPs to eliminate these pollutants include a range of physicochemical and biological methods. The use of enzymes, specifically, oxidoreductases, are increasingly being studied for their ability to degrade different classes of organic compounds. These enzymes have been immobilized on different supports to promote their adoption as a cost-effective and recyclable remediation approach. Unfortunately, some of these techniques have shown a negative effect on the enzyme, including denaturation and loss of catalytic activity. This review focuses on the major challenges facing researchers working on the immobilization of peroxidases and the recent progress that has been made in this area. It focuses on four major areas: (1) stability of enzymes upon immobilization, enzyme engineering, and evolution; (2) recyclability and reusability, including immobilization on membranes and solid supports; (3) cost associated with enzyme-based remediation; and (4) scaling-up and bioreactors.

Multicatalytic Hybrid Materials for Biocatalytic and Chemoenzymatic Cascades—Strategies for Multicatalyst (Enzyme) Co-Immobilization

During recent decades, the use of enzymes or chemoenzymatic cascades for organic chemistry has gained much importance in fundamental and industrial research. Moreover, several enzymatic and chemoenzymatic reactions have also served in green and sustainable manufacturing processes especially in fine chemicals, pharmaceutical, and flavor/fragrance industries. Unfortunately, only a few processes have been applied at industrial scale because of the low stabilities of enzymes along with the problematic processes of their recovery and reuse. Immobilization and co-immobilization offer an ideal solution to these problems. This review gives an overview of all the pathways for enzyme immobilization and their use in integrated enzymatic and chemoenzymatic processes in cascade or in a one-pot concomitant execution. We place emphasis on the factors that must be considered to understand the process of immobilization. A better understanding of this fundamental process is an essential tool not only in the choice of the best route of immobilization but also in the understanding of their catalytic activity.

Tailor-made novel electrospun polystyrene/poly(d,l-lactide-co-glycolide) for oxidoreductases immobilization: Improvement of catalytic properties under extreme reaction conditions

Immobilized enzymes find applications in many areas such as pharmacy, medicine, food production and environmental protection. However, protecting these biocatalysts against harsh reaction conditions and retaining their enzymatic activity even after several biocatalytic cycles are major challenges. Properly selected supports and type of surface modifier therefore seem to be crucial for achieving high retention of catalytic activity of immobilized biomolecules. Here we propose production of novel composite electrospun fibers from polystyrene/poly(d,l-lactide-co-glycolide) (PS/PDLG) and its application as a support for immobilization of oxidoreductases such as alcohol dehydrogenase (ADH) and laccase (LAC). Two strategies of covalent binding, (i) (3-aminopropyl)triethoxysilane (APTES) with glutaraldehyde (GA) and (ii) polydopamine (PDA), were applied to attach oxidoreductases to PS/PDLG. The average fiber diameter was shown to increase from 1.252 µm to even 3.367 µm after enzyme immobilization. Effective production of PS/PDLG fibers and biomolecule attachment were confirmed by Fourier transform infrared spectroscopy analysis. The highest substrate conversion efficiency was observed at pH 6.5 and 5 for ADH and LAC, respectively, and at 25 °C for enzymes attached using the APTES + GA approach. Improvement of enzyme stabilization at high temperatures was confirmed in that relative activities of enzymes immobilized onto PS/PDLG fibers were over 20% higher than those of the free biomolecules, and enzyme leaching from the support using acetate and MES buffers was below 10 mg/g.

Electrospun Fibres of Chitosan/PVP for the Effective Chemotherapeutic Drug Delivery of 5-Fluorouracil

Electrospun nanofibrous mats consisting of chitosan (CS) and polyvinylpyrrolidone (PVP) were constructed. Tuning of solution and process parameters was performed and resulted in an electrospun system containing a 6:4 ratio of PVP:CS. This is a significant increase in the proportion of spun CS on the previously reported highest ratio PVP:CS blend. SEM analysis showed that the nanofibrous mats with 4 wt% CS/6 wt% PVP (sample E) comprised homogenous, uniform fibres with an average diameter of 0.569 μm. XPS analysis showed that the surface of the samples consisted of PVP. Raman and FTIR analysis revealed intermolecular interactions (via H-bonding) between PVP and CS. In FTIR spectra, the contribution of chitosan to CS/PVP complexes was shown by the downshift of the C=O band and by the linear increase in intensity of C-O stretching in CS. XPS analysis showed a smaller shift at the binding energy 531 eV, which relates to the amide of the acetylated functional groups. The obtained results demonstrate a sensitivity of Raman and FTIR tests to the presence of chitosan in PVP:CS blend. The chemotherapy drug 5-Fu was incorporated into the constructs and cell viability studies were performed. WST-8 viability assay showed that exposure of A549 human alveolar basal epithelial cells to 10 mg/mL 5-Fu loaded fibres was most effective at killing cells over 24 h. On the other hand, the constructs with loading of 1 mg/mL of drug were not efficient at killing A549 human alveolar basal epithelial cells. This study showed that CS/PVP/5-Fu constructs have potential in chemotherapeutic drug delivery systems.

Different strategies for the lipase immobilization on the chitosan based supports and their applications

Immobilized enzymes have received incredible interests in industry, pharmaceuticals, chemistry and biochemistry sectors due to their various advantages such as ease of separation, multiple reusability, non-toxicity, biocompatibility, high activity and resistant to environmental changes. This review in between various immobilized enzymes focuses on lipase as one of the most practical enzyme and chitosan as a preferred biosupport for lipase immobilization and provides a broad range of studies of recent decade. We highlight several aspects of lipase immobilization on the surface of chitosan support containing various types of lipase and immobilization techniques from physical adsorption to covalent bonding and cross-linking with their benefits and drawbacks. The recent advances and future perspectives that can improve the present problems with lipase and chitosan such as high-price of lipase and low mechanical resistance of chitosan are also discussed. According to the literature, optimization of immobilization methods, combination of these methods with other techniques, physical and chemical modifications of chitosan, co-immobilization and protein engineering can be useful as a solution to overcome the mentioned limitations.

Sandwich construction of chitosan/reduced graphene oxide composite as additive-free electrode material for high-performance supercapacitors

The sandwich construction of chitosan (CS)/reduced graphene oxide (rGO) composite was synthesized through microwave-assisted hydrothermal method without further carbonization or activation process (CRG). CS homogeneous attached between the rGO slice sheet and improve the dispersion of CRG effectively, which can increase its specific surface area with hierarchical porous structure. Dehydration condensation occurred between CS and rGO, forming NHCO groups that can promote the wettability and conductivity of the composites. CRG exhibited improved degree of order and reduced graphitization defect, N-5 and OI groups were the dominant nitrogen and oxygen-containing groups. When used as additive-free electrode, CRG exhibited a high specific capacitance of 274 F g^-1 at the current density of 0.5 A g^-1 with good rate performance in a three-electrode system using 1 M H₂SO₄ electrolyte. Solid-state supercapacitor device was assembled with CRG electrode and lignin hydrogel electrolytes, high gravimetric energy densities of 8.4 Wh kg^-1 at the power density of 50 W kg^-1 was achieved.

Efficacy of topotecan nanoparticles for intravitreal chemotherapy of retinoblastoma

Retinoblastoma (Rb) is the most common intraocular malignancy in children that accounts for approximately 4% of all pediatric malignancies. Since chemotherapy is a widely practiced treatment for Rb, there is a growing interest in developing new and effective drugs to overcome systemic and local side effects of chemotherapy to improve the quality of life and increase the chances of survival. This study sought to fabricate thiolated chitosan nanoparticles containing topotecan (TPH-TCs-NPs) with a view of enhancing drug loading and release control. This research was also designed to assess the ability of TPH-TCs-NPs to improve cell association, increase treatment efficacy in retinoblastoma cells and xenograft-rat-model of retinoblastoma, and overcome current topotecan hydrochloride (TPH) intravitreal administration challenges, including stability loss and poor cellular uptake. Modified ionic gelation method was optimized to fabricate TPH-TCs-NPs and TPH-TMC-NPs (N-trimethyl chitosan nanoparticles containing TPH). We characterized the NPs and quantified topotecan loading and release against a free TPH standard. The efficacy of TPH-NPs was quantified in human retinoblastoma cells (Y79) by XTT and flow cytometry measurement. In addition, Y79 cells were injected intravitreally in both eyes of immunodeficient wistar albino rats to create a xenograft-rat-model to compare the antitumor effectiveness of TPH-NPs and TPH by intravitreal administration. TPH-NPs complexation was confirmed by EDX, FTIR, and DSC techniques. TPH-TCs-NPs and TPH-TMC-NPs had high encapsulation efficiency (85.23 ± 2 and 73.34 ± 2% respectively). TPH-TCs-NPs showed a mean diameter, polidispersity index, and zeta potential of 25±2 nm, 0.21 ± 0.03 and +12 ± 2 mV, respectively. As a function of dose, TCs and TMC NPs were more efficacious than free topotecan (IC50s 53.17 and 85.88 nM, relative to 138.30 nM respectively, P = 0.012). Kruskal-Wallis test showed a statistically significant difference between the groups. Additionally, a significant difference between the tumor control and TPH-TCs-NPs treated group in xenograft-rat-model ( Range of P-value: 0.026 to 0.035) was shown by Bonferroni post hoc test. The current investigation demonstrated enhanced efficacy and association of TPH-TCs-NPs relative to free TPH in retinoblastoma cells and tumor in vitro and in vivo.

Investigation of effect of ultrasound on immobilized C. rugosa lipase: Synthesis of biomass based furfuryl derivative and green metrics evaluation study

The present work deals with the synthesis of lab-made carboxymethyl cellulose (CMC) and chitosan (CHI) based co-polymer cross-linked with glutaraldehyde (GLU) which is used as immobilization matrix for the immobilization of Candida rugosa (CRL) lipase (CMC:CHI:GLU:CRL). This immobilized biocatalyst was subjected to characterization such as lipase-activity, kinetic-parameters, water-content, surface-texture, stability and half-life time etc. Effect of various ultrasound parameters (power, frequency, duty cycle, exposure time) on lipase activity is also tested which indicated that, developed biocatalyst has significant activity-stability and half-life-time in ultrasonicated medium. Further, this biocatalyst was applied to synthesize biomass-derived furfuryl derivative which offering excellent conversion of 99 % of bio-based furfuryl ester. The synthetic protocol is optimized in detail (with twelve reaction parameters) under ultrasonicated medium. Recyclability study offered 68 % conversion of the furfuryl ester after sixth reuse. Moreover, the developed protocol is well extended to synthesize various commercially important compounds. Besides this, we investigated thermodynamic parameters (ΔG*, ΔH*, ΔS*) which demonstrating more feasibility of biocatalytic synthesis in ultrasonicated medium than conventional medium. Finally, green metrics evaluation parameters (E-factor, carbon-efficiency and mass-intensity) are studied which indicating efficient synergetic role of immobilized CMC:CHI:GLU:CRL lipase biocatalysis and ultrasonication in green and sustainable synthesis.

Biomemristic Behavior for Water-Soluble Chitosan Blended with Graphene Quantum Dot Nanocomposite

Bionanocomposite has promising biomemristic behaviors for data storage inspired by a natural biomaterial matrix. Carboxylated chitosan (CCS), a water-soluble derivative of chitosan avoiding the acidic salt removal, has better biodegradability and bioactivity, and is able to absorb graphene quantum dots (GQDs) employed as charge-trapping centers. In this investigation, biomemristic devices based on water-soluble CCS:GQDs nanocomposites were successfully achieved with the aid of the spin-casting method. The promotion of binary biomemristic behaviors for Ni/CCS:GQDs/indium-tin-oxide (ITO) was evaluated for distinct weight ratios of the chemical components. Fourier transform infrared spectroscopy, Raman spectroscopy (temperature dependence), thermogravimetric analyses and scanning electron microscopy were performed to assess the nature of the CCS:GQDs nanocomposites. The fitting curves on the experimental data further confirmed that the conduction mechanism might be attributed to charge trapping-detrapping in the CCS:GQDs nanocomposite film. Advances in water-soluble CCS-based electronic devices would open new avenues in the biocompatibility and integration of high-performance biointegrated electronics.

Recycling performance of graphene oxide-chitosan hybrid hydrogels for removal of cationic and anionic dyes

Water is one of the most important resources for human survival and development. Efficient wastewater treatment techniques such as coagulation, filtration, ozonation, and reverse osmosis have been studied to remove toxic materials from water. Implementation of adsorption columns has been proven to be an efficient wastewater treatment method, particularly for the removal of organic contaminants. In this study, we present the preparation of an eco-friendly graphene oxide-chitosan (GC) composite hydrogel column (GCCHC) and its application as a broad-spectrum adsorbent for wastewater treatment. The GCCHC shows a high removal capacity towards different contaminants including both cationic dyes [methylene blue (MB) and rhodamine B (RhB)] and anionic dyes [methylene orange (MO) and congo red (CR)]. Moreover, the samples can be regenerated and recycled without loss of contaminant removal capacity over successive adsorption and washing cycles.

Immobilization of Trypsin from Porcine Pancreas onto Chitosan Nonwoven by Covalent Bonding

The present study deals with the potential application of chitosan nonwoven for biomedical textiles based on enzyme immobilization. For this, chitosan nonwoven was first cross-linked with glutaraldehyde to introduce aldehyde groups at optimal conditions. To immobilize the enzyme trypsin onto glutaraldehyde-pre-activated chitosan nonwoven, several parameters such as pH, enzyme concentration, and reaction times were investigated. In addition, the pH, thermal stability, storage stability, and reusability of immobilized trypsin were examined. We found that the optimal immobilization conditions for trypsin were pH 8.5, enzyme concentration of 8% (owf), and treatment time of 30 min. Trypsin was immobilized at 25 °C efficiently. The immobilized trypsin showed lower pH stability and better thermal stability than free trypsin. The immobilized trypsin showed 50% of its initial activity after being used 15 times and 80% of that after 20 days of storage at 4 °C. SEM analysis also confirmed that trypsin was immobilized on chitosan nonwoven.

Sustainable removal of pernicious arsenic and cadmium by a novel composite of MnO2 impregnated alginate beads: A cost-effective approach for wastewater treatment

There is a dire necessity of developing low cost waste water treatment systems, for the efficient removal of noxious heavy metals (and metalloids) such as Arsenic (As) and Cadmium (Cd). Magnetic biopolymer (CABs-MO) was synthesized by the entrapment of nanocrystalline MnO₂ in the polymeric microcapsules of calcium alginate (CABs). Batch experiments were conducted under constant pH (6.5), temperature (25^OC), different initial concentrations (30-300 mg L^-1) and contact times (0-48 h) to study the adsorption isotherms and removal kinetics of pristine (CABs) and hybrid biopolymer (CABs-MO) for the removal of As and Cd. The pseudo-equilibrium process was mathematically well explained by the pseudo-second-order kinetic (R² ≥ 0.99) and Langmuir isotherm model (R² ≥ 0.99) with the highest monolayer sorption capacity of 63.6 mg g^-1 for Cd on CABs-MO. The As removal rate was maximum up to 6.5 mg g^-1 after 12 h of contact period in a single contaminant system than in the mixed contaminant (As + Cd) system (0.8 mg g^-1), though the effect was non-significant for Cd (p < 0.05; t-test). The performance of the 10 mM HCl as a regenerating agent was superior (for As in comparison to Cd, p < 0.05; t-test) compared to distilled water (DW) through three to five regeneration cycles. Therefore, the obtained results clearly validate the feasibility of CABs-MO as a potential promising adsorbent for removing metal contaminants from the wastewater. Further research is required to study the decontamination of emerging contaminants with such novel composite beads characterized by varied physico-chemical properties.

Immobilization of cellulase in the non-natural ionic liquid environments to enhance cellulase activity and functional stability

Ionic liquids (ILs) have been applied as an environmentally friendly solvent in the pretreatment of lignocellulosic biomass for more than a decade. The ILs involved pretreatment processes for cellulases mediated saccharification lead to both the breakdown of cellulose crystallinity and the decrease of lignin content, thereby improving the solubility of cellulose and the accessibility of cellulase. However, most cellulases are partially or completely inactivated in the presence of even low amount of ILs. Immobilized cellulases are found to perform improved stability and higher apparent activity in practical application compared with its free counterparts. Enzyme immobilization therefore has become a promising way to relieve the deactivation of cellulase in ILs. Various immobilization carriers and methods have been developed and achieved satisfactory results in improving the stability, activity, and recycling of cellulases in IL pretreatment systems. This review aims to provide detailed introduction of immobilization methods and carrier materials of cellulase, including natural polysaccharides, synthetic polymers, inorganic materials, magnetic materials, and newly developed composite materials, and illustrate key methodologies in improving the performance of cellulase in the presence of ILs. Especially, novel materials and concepts from the recently representative researches are focused and discussed comprehensively, and future trends in immobilization of cellulases in non-natural ILs environments are speculated in the end.

Enhanced antibacterial activity of Egyptian local insects' chitosan-based nanoparticles loaded with ciprofloxacin-HCl

Chitosan (CS), possess enormous properties, being biodegradable, biocompatible, and antimicrobial. CS could be formulated and casted into different forms including 2D films, hydrogels, and nanoparticles. Chitosan-based nanoparticles (CSNPs) showed countless interest as polymeric drug delivery system (DDS) with its improved bioavailability, and stability when compared with traditional DDS. Ciprofloxacin is a prescribed antibiotic for many diseases, but its efficiency was affected by antibacterial resistance. Therefore, in this study, CSNPs loaded with ciprofloxacin (Cipro/CSNPs) were prepared from CS isolated from desert locusts, beetles, honey bee exoskeletons, and shrimp shells were used as a standard control. CSNPs were formulated by ionic crosslinking method, then loaded with ciprofloxacin HCl, and characterized using particle size distribution, zeta potential, and drug entrapment efficiency. The release of ciprofloxacin from CSNPs was evaluated and its kinetic modelling was performed. Antibacterial activity of CSNPs was evaluated against Escherichia coli, Bacillus thuringiensis, Methicillin-resistant Staphylococcus aureus (MRSA) and, Pseudomonas aeruginosa. Minimum inhibitory concentrations (MIC) were determined and compared between chitosan sources. The Cipro/CSNPs results indicate that the highest antibacterial activity against E. coli and MRSA with MIC varying from 0.0043 to 0.01 μg/ml and from 0.07 to 0.14 μg/ml, respectively. In addition, CSNPs enhanced drug delivery, and allowed its controlled release.

Chitosan as a Coupling Agent for Phosphate Glass Fibre/Polycaprolactone Composites

This study shows that chitosan (CS) could be highly useful as a coupling agent in phosphate glass fibre/polycaprolactone (PGF/PCL) composites, as it improved the interfacial shear strength by up to 78%. PGFs of the composition 45P2O5–5B2O3–5Na2O–24CaO–10MgO–11Fe2O3 were dip-coated with CS (with a degree of deacetylation >80%) dissolved in acetic acid solution (2% v/v). Different CS concentrations (3–9 g L−1) and coating processes were investigated. Tensile and fragmentation tests were conducted to obtain the mechanical properties of the single fibres and interfacial properties of the PGF/PCL composites, respectively. It was observed that post-cleaning, the treated fibres had their tensile strength reduced by around 20%; however, the CS-coated fibres experienced strength increases of up to 1.1–11.5%. TGA and SEM analyses were used to confirm the presence of CS on the fibre surface. FTIR, Raman, and X-ray photoelectron spectroscopy (XPS) analyses further confirmed the presence of CS and indicated the protonation of CS amine groups. Moreover, the nitrogen spectrum of XPS demonstrated a minimum threshold of CS coating required to provide an improved interface.

"Smart" chemistry and its application in peroxidase immobilization using different support materials

In the past few decades, the enzyme immobilization technology has been exploited a lot and thus became a matter of rational design. Immobilization is an alternative approach to bio-catalysis with the added benefits, adaptability to automation and high-throughput applications. Immobilization-based approaches represent simple but effective routes for engineering enzyme catalysts with higher activities than wild-type or pristine counterparts. From the chemistry viewpoint, the concept of stabilization via manipulation of functional entities, the enzyme surfaces have been an important driving force for immobilizing purposes. In addition, the unique physiochemical and structural functionalities of pristine or engineered cues, or insoluble support matrices (carrier) such as mean particle diameter, swelling behavior, mechanical strength, and compression behavior are of supreme interest and importance for the performance of the immobilized systems. Immobilization of peroxidases into/onto insoluble support matrices is advantageous for practical applications due to convenience in handling, ease separation of enzymes from a reaction mixture and the reusability. A plethora of literature is available explaining individual immobilization system. However, current literature lacks the chemistry viewpoint of immobilization. This review work presents state-of-the-art "Smart" chemistry of immobilization and novel potentialities of several materials-based cues with different geometries including microspheres, hydrogels and polymeric membranes, nanoparticles, nanofibers, composite and hybrid or blended support materials. The involvement of various functional groups including amino, thiol, carboxylic, hydroxyl, and epoxy groups via "click" chemistry, amine chemistry, thiol chemistry, carboxyl chemistry, and epoxy chemistry over the protein surfaces is discussed.

Magnetic nanoparticles: a versatile carrier for enzymes in bio-processing sectors

Many industrial processes experience the advantages of enzymes which evolved the demand for enzymatic technologies. The enzyme immobilisation technology using different carriers has trustworthy applications in industrial biotechnology as these techniques encompass varied advantages such as enhanced stability, activity along with reusability. Immobilisation onto nanomaterial is highly favourable as it includes almost all aspects of science. Among the various techniques of immobilisation, the uses of nanoparticles are remarkably well perceived as these possess high-specific surface area leading to high enzyme loadings. The magnetic nanoparticles (MNPs) are burgeoning in the field of immobilisation as it possess some of the unique properties such as high surface area to volume ratio, uniform particle size, biocompatibility and particularly the recovery of enzymes with the application of an external magnetic field. Immobilisation of industrially important enzymes onto nanoparticles offers overall combined benefits. In this review, the authors here focus on the current scenario in synthesis and functionalisation of MNPs which makes it more compatible for the enzyme immobilisation and its application in the biotechnological industries.

3D printable conducting hydrogels containing chemically converted graphene

The development of conducting 3D structured biocompatible scaffolds for the growth of electroresponsive cells is critical in the field of tissue engineering. This work reports the synthesis and 3D processing of UV-crosslinkable conducting cytocompatible hydrogels that are prepared from methacrylated chitosan (ChiMA) containing graphenic nanosheets. The addition of chemically converted graphene resulted in mechanical and electrical properties of the composite that were significantly better than ChiMA itself, as well as improved adhesion, proliferation and spreading of L929 fibroblasts cells. The chemically converted graphene/ChiMA hydrogels were amenable to 3D printing and this was used to produce multilayer scaffolds with enhanced mechanical properties through UV-crosslinking.

Sugar ester surfactants: enzymatic synthesis and applications in food industry

Sugar esters are non-ionic surfactants that can be synthesized in a single enzymatic reaction step using lipases. The stability and efficiency of lipases under unusual conditions and using non-conventional media can be significantly improved through immobilization and protein engineering. Also, the development of de novo enzymes has seen a significant increase lately under the scope of the new field of synthetic biology. Depending on the esterification degree and the nature of fatty acid and/or sugar, a range of sugar esters can be synthesized. Due to their surface activity and emulsifying capacity, sugar esters are promising for applications in food industry.

Fe3+-induced bioinspired chitosan hydrogels for the sustained and controlled release of doxorubicin

A novel Fe³⁺-induced mussel-inspired CCS–NACCS hydrogel was developed for the sustained and controlled release of doxorubicin (DOX).

Fe3+-induced oxidation and coordination cross-linking in catechol–chitosan hydrogels under acidic pH conditions

Fe³⁺-induced oxidation and coordination cross-linking in catechol–chitosan (CCS) hydrogels under acidic pH conditions; EDTA was used to disintegrate the coordination cross-linking system.

Physicochemical and nanomechanical investigation of electrodeposited chitosan:PEO blends

Cathodic electrodeposition is a bottom up process that is emerging as a simple yet efficient strategy to engineer thin polymeric films with well-defined physicochemical properties.

Processable conducting graphene/chitosan hydrogels for tissue engineering

Electrically conductive, mechanically improved graphene/chitosan/lactic acid composites were synthesised and could be easily processed into multi-layer scaffolds using additive fabrication techniques.

Enhanced biocatalytic esterification with lipase-immobilized chitosan/graphene oxide beads

In this work, lipase from Candida rugosa was immobilized onto chitosan/graphene oxide beads. This was to provide an enzyme-immobilizing carrier with excellent enzyme immobilization activity for an enzyme group requiring hydrophilicity on the immobilizing carrier. In addition, this work involved a process for the preparation of an enzymatically active product insoluble in a reaction medium consisting of lauric acid and oleyl alcohol as reactants and hexane as a solvent. This product enabled the stability of the enzyme under the working conditions and allowed the enzyme to be readily isolated from the support. In particular, this meant that an enzymatic reaction could be stopped by the simple mechanical separation of the “insoluble” enzyme from the reaction medium. Chitosan was incorporated with graphene oxide because the latter was able to enhance the physical strength of the chitosan beads by its superior mechanical integrity and low thermal conductivity. The X-ray diffraction pattern showed that the graphene oxide was successfully embedded within the structure of the chitosan. Further, the lipase incorporation on the beads was confirmed by a thermo-gravimetric analysis. The lipase immobilization on the beads involved the functionalization with coupling agents, N-hydroxysulfosuccinimide sodium (NHS) and 1-ethyl-(3-dimethylaminopropyl) carbodiimide (EDC), and it possessed a high enzyme activity of 64 U. The overall esterification conversion of the prepared product was 78% at 60°C, and it attained conversions of 98% and 88% with commercially available lipozyme and novozyme, respectively, under similar experimental conditions.

Encapsulation in a sol-gel matrix of lipase from Aspergillus niger obtained by bioconversion of a novel agricultural residue

Lipase from Aspergillus niger was obtained from the solid-state fermentation of a novel agroindustrial residue, pumpkin seed flour. The partially purified enzyme was encapsulated in a sol-gel matrix, resulting in an immobilization yield of 71.4 %. The optimum pH levels of the free and encapsulated enzymes were 4.0 and 3.0, respectively. The encapsulated enzyme showed greater thermal stability at temperatures of 45 and 60 °C than the free enzyme. The positive influence of the encapsulation process was observed on the thermal stability of the enzyme, since a longer half-life t 1/2 and lower deactivation constant were obtained with the encapsulated lipase when compared with the free lipase. Kinetic parameters were found to follow the Michaelis-Menten equation. The K m values indicated that the encapsulation process reduced enzyme-substrate affinity and the V max was about 31.3 % lower than that obtained with the free lipase. The operational stability was investigated, showing 50 % relative activity up to six cycles of reuse at pH 3.0 at 37 °C. Nevertheless, the production of lipase from agroindustrial residue associated with an efficient immobilization method, which promotes good catalytic properties of the enzyme, makes the process economically viable for future industrial applications.

Catalyzed ester synthesis using Candida rugosa lipase entrapped by poly(N-isopropylacrylamide-co-itaconic acid) hydrogel

This study reports the synthesis of polymeric matrices based on N-isopropylacrylamide and itaconic acid and its application for immobilization of lipase from Candida rugosa. The lipase was immobilized by entrapment method. Free and immobilized lipase activities, pH and temperature optima, and storage stability were investigated. The optimum temperature for free and entrapped lipase was found to be 40 and 45°C, while the optimum pH was observed at pH 7 and 8, respectively. Both hydrolytic activity in an aqueous medium and esterolytic activity in an organic medium have been evaluated. Maximum reaction rate (V_max) and Michaelis-Menten constants (K_m) were also determined for immobilized lipase. Storage stability of lipase was increased as a result of immobilization process. Furthermore, the operational stability and reusability of the immobilized lipase in esterification reaction have been studied, and it was observed that after 10 cycles, the residual activity for entrapped lipase was as high as 50%, implying that the developed hydrogel and immobilized system could provide a promising solution for the flavor ester synthesis at the industrial scale.

ZnO nanoparticles induced effects on nanomechanical behavior and cell viability of chitosan films

The aim of this paper is to develop novel chitosan-zinc oxide nanocomposite films for biomedical applications. The films were fabricated with 1, 5, 10 and 15% w/w of zinc oxide (ZnO) nanoparticles (NPs) incorporated with chitosan (CS) using a simple method. The prepared nanocomposite films were characterized using atomic force microscopy, Raman and X-ray diffraction studies. In addition, nano and micro mechanical properties were measured. It was found that the microhardness, nanohardness and its corresponding elastic modulus increased with the increase of ZnO NP percentage in the CS films. However, the ductility of films decreased as the percentage of ZnO NPs increased. Cell attachment and cytotoxicity of the prepared films at days two and five were evaluated in vitro using osteoblasts (OBs). It was observed that OB viability decreased in films with higher than 5% ZnO NPs. This result suggests that although ZnO NPs can improve the mechanical properties of pure CS films, only a low percentage of ZnO NPs can be applied for biomedical and bioengineering applications because of the cytotoxicity effects of these particles.