Alginate/starch blend fibers and their properties for drug controlled release

Aloe vera-based biomaterial ink for 3D bioprinting of wound dressing constructs

This study emphasizes the development of a multifunctional biomaterial ink for wound healing constructs. The biomaterial ink benefits from Aloe vera's intrinsic biocompatible, biodegradable, antioxidant, antimicrobial, anti-inflammatory, and immunomodulatory attributes, thus alleviating the need for supplementary substances employed to combat infections and stimulate tissue regeneration. Moreover, this biomaterial ink seeks to address the scarcity of standardized printable materials possessing adequate biocompatibility and physicochemical properties, which hinder its widespread clinical adoption. The biomaterial ink was synthesized via ionic crosslinking to enhance its rheological and mechanical characteristics. The findings revealed that Aloe vera substantially boosted the hydrogel's viscoelastic behavior, enabling superior compressive modulus and the extrusion of fine filaments. The bioprinted constructs exhibited desirable resolution and mechanical strength while displaying a porous microstructure analogous to the native extracellular matrix. Biological response demonstrated no detrimental impact on stem cell viability upon exposure to the biomaterial ink, as confirmed by live/dead assays. These outcomes validate the potential of the developed biomaterial ink as a resource for the bioprinting of wound dressings that effectively foster cellular proliferation, thereby promoting enhanced wound healing by leveraging Aloe vera's inherent properties.

Effects of cerium-doped bioactive glass incorporation on an alginate/gelatin scaffold for bone tissue engineering: In vitro characterizations

Bioactive glasses (BGs) have been extensively employed in treating bone defects due to their capacity to bond and integrate with hard and soft tissues. To promote their characteristics, BGs are doped with therapeutic inorganic ions; Among these, Cerium (Ce) is of special attention because of its material and biological properties. This study aimed to investigate the effects of the addition of Ce to BG on the physicochemical and biological properties of the alginate/gelatin (Alg-Gel) scaffold compared with a similar scaffold that only contains BG45S5. The scaffolds were characterized for their biocompatibility using human bone marrow-derived mesenchymal stem cells (hBM-MSCs) by MTT analysis. The osteogenic differentiation of hBM-MSCs cultured on the scaffolds was assessed by evaluating the alkaline phosphatase (ALP) activity and the expression of osteogenic-related genes. Scanning electron microscopy of the prepared scaffolds showed an interconnected porous structure with an average diameter of 212-272 μm. The Young's modulus of the scaffolds significantly increased from 13 ± 0.82 MPa for Alg-Gel to 91 ± 1.76 MPa for Alg-Gel-BG/Ce. Ce doping improved the osteogenic differentiation of hBM-MSCs and ALP secretion compared to the other samples, even without adding an osteogenic differentiation medium. The obtained results demonstrated the biocompatibility and osteo-inductive potentials of the Alg-Gel-BG/Ce scaffold for bone tissue engineering.

Starch-based materials for drug delivery in the gastrointestinal tract-A review

Starch is a natural copolymer with unique physicochemical characteristics. Historically, it has been physically, chemically, or enzymatically modified to obtain ad-hoc functional properties for its use in different applications. In this context, the use of starch-based materials in drug delivery systems (DDSs) has gained great attention mainly because it is cheap, biodegradable, biocompatible, and renewable. This paper reviews the state of the art in starch-based materials design for their use in drug-controlled release with internal stimulus responsiveness; i.e., pH, temperature, colonic microbiota, or enzymes; specifically, those orally administered for its release in the gastrointestinal tract (GIT). Physical-chemical principles in the design of these materials taking into account their response to a particular stimulus are discussed. The relationship between the type of DDSs structure, starch modification routes, and the corresponding drug release profiles are systematically analyzed. Furthermore, the challenges and prospects of starch-based materials for their use in stimulus-responsive DDSs are also debated.

Reduced graphene oxide coated alginate scaffolds: potential for cardiac patch application

BACKGROUND

Cardiovascular diseases, particularly myocardial infarction (MI), are the leading cause of death worldwide and a major contributor to disability. Cardiac tissue engineering is a promising approach for preventing functional damage or improving cardiac function after MI. We aimed to introduce a novel electroactive cardiac patch based on reduced graphene oxide-coated alginate scaffolds due to the promising functional behavior of electroactive biomaterials to regulate cell proliferation, biocompatibility, and signal transition.

METHODS

The fabrication of novel electroactive cardiac patches based on alginate (ALG) coated with different concentrations of reduced graphene oxide (rGO) using sodium hydrosulfite is described here. The prepared scaffolds were thoroughly tested for their physicochemical properties and cytocompatibility. ALG-rGO scaffolds were also tested for their antimicrobial and antioxidant properties. Subcutaneous implantation in mice was used to evaluate the scaffolds' ability to induce angiogenesis.

RESULTS

The Young modulus of the scaffolds was increased by increasing the rGO concentration from 92 ± 4.51 kPa for ALG to 431 ± 4.89 kPa for ALG-rGO-4 (ALG coated with 0.3% w/v rGO). The scaffolds' tensile strength trended similarly. The electrical conductivity of coated scaffolds was calculated in the semi-conductive range (~ 10-4 S/m). Furthermore, when compared to ALG scaffolds, human umbilical vein endothelial cells (HUVECs) cultured on ALG-rGO scaffolds demonstrated improved cell viability and adhesion. Upregulation of VEGFR2 expression at both the mRNA and protein levels confirmed that rGO coating significantly boosted the angiogenic capability of ALG against HUVECs. OD620 assay and FE-SEM observation demonstrated the antibacterial properties of electroactive scaffolds against Escherichia coli, Staphylococcus aureus, and Streptococcus pyogenes. We also showed that the prepared samples possessed antioxidant activity using a 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging assay and UV-vis spectroscopy. Histological evaluations confirmed the enhanced vascularization properties of coated samples after subcutaneous implantation.

CONCLUSION

Our findings suggest that ALG-rGO is a promising scaffold for accelerating the repair of damaged heart tissue.

Plant-Derived Biomaterials and Their Potential in Cardiac Tissue Repair

Cardiovascular disease remains the leading cause of mortality worldwide. The inability of cardiac tissue to regenerate after an infarction results in scar tissue formation, leading to cardiac dysfunction. Therefore, cardiac repair has always been a popular research topic. Recent advances in tissue engineering and regenerative medicine offer promising solutions combining stem cells and biomaterials to construct tissue substitutes that could have functions similar to healthy cardiac tissue. Among these biomaterials, plant-derived biomaterials show great promise in supporting cell growth due to their inherent biocompatibility, biodegradability, and mechanical stability. More importantly, plant-derived materials have reduced immunogenic properties compared to popular animal-derived materials (e.g., collagen and gelatin). In addition, they also offer improved wettability compared to synthetic materials. To date, limited literature is available to systemically summarize the progression of plant-derived biomaterials in cardiac tissue repair. Herein, this paper highlights the most common plant-derived biomaterials from both land and marine plants. The beneficial properties of these materials for tissue repair are further discussed. More importantly, the applications of plant-derived biomaterials in cardiac tissue engineering, including tissue-engineered scaffolds, bioink in 3D biofabrication, delivery vehicles, and bioactive molecules, are also summarized using the latest preclinical and clinical examples.

Controlled drug release contenders comprising starch/poly(allylamine hydrochloride) biodegradable composite films

The blending of natural polysaccharides with synthetic polymers has attracted much attention in drug delivery models owing to their remarkable biodegradable and biocompatible characteristics. This study focuses on the facile preparation of a sequence of composite films having Starch/Poly(allylamine hydrochloride) (ST/PAH) in different compositions to propose a novel drug delivery system (DDS). ST/PAH blend films were developed and characterized. FT-IR evaluation confirmed the involvement of intermolecular H-bonding between the ST and PAH counterparts in blended films. The water contact angle (WCA) ranged from 71° to 100° indicating that all the films were hydrophobic. TPH-1 (90 % ST and 10 % PAH) was evaluated for in vitro controlled drug release (CDR) at 37 ± 0.5 °C in a time-dependent fashion. CDR was recorded in phosphate buffer saline (PBS) and simulated gastric fluid (SGF). In the case of SGF (pH 1.2), the percentile drug release (DR) for TPH-1 was approximately 91 % in 110 min, while the maximum DR was 95 % in 80 min in PBS (pH 7.4) solution. Our results demonstrate that the fabricated biocompatible blend films can be a promising candidate for a sustained-release DDS for oral drug administration, tissue engineering, wound dressings, and other biomedical applications.

Development of the new pH-driven carrier from alginate/carboxymethyl starch bio-coated co-drugs@COF-OH for controlled and concomitant colon cancer treatment

To develop a new more efficient colon cancer treatment bio-vehicle, in frontier research, for the first time, an attempt has been made to design a unique colon-targeted bio-carrier containing polysaccharides along with nanoporous materials. So, at first, an imine-based covalent organic framework (COF-OH) with respectively an average pore diameter and surface area at 8.5058 nm and 208.29 m²·g^-1 was fabricated. In the next step, about 41.68 % and 95.8 % of 5-fluorouracil (5-Fu) and curcumin (CUR) respectively were loaded on COF-OH, and 5-Fu + CUR@COF-OH was achieved. Due to the higher rate of drug releases in simulated stomach media, 5-Fu + CUR@COF-OH was coated with a mixture of alginate (Alg) and carboxymethyl starch (CMS) via the ionic crosslinking (Alg/CMS@(5-Fu + CUR@COF-OH)). Findings displayed that the use of polysaccharide coat reduce the drug releases in simulated gastric and improved it in simulated intestinal and colonic fluids. The beads swelled about 93.33 % under simulated gastrointestinal conditions, but this value was found higher in the simulated colonic environment and reached 326.67 %. The hemolysis rate lower than 5 %, as well as the cell viability higher than 80 %, were the main showing signs of system biocompatibility. Altogether, the results of the preliminary investigations can highlight the potential of the Alg/CMS@(5-Fu + CUR@COF-OH) for colon-specific drug delivery.

Polyhydroxybutyrate-starch/carbon nanotube electrospun nanocomposite: A highly potential scaffold for bone tissue engineering applications

Blend nanofibers composed of synthetic and natural polymers with carbon nanomaterial, have a great potential for bone tissue engineering. In this study, the electrospun nanocomposite scaffolds based on polyhydroxybutyrate(PHB)-Starch-multiwalled carbon nanotubes (MWCNTs) were fabricated with different concentrations of MWCNTs including 0.5, 0.75 and 1 wt%. The synthesized scaffolds were characterized in terms of morphology, porosity, thermal and mechanical properties, biodegradation, bioactivity, and cell behavior. The effect of the developed structures on MG63 cells was determined by real-time PCR quantification of collagen type I, osteocalcin, osteopontin and osteonectin genes. Our results showed that the scaffold containing 1 wt% MWCNTs presented the lowest fiber diameter (124 ± 44 nm) with a porosity percentage above 80 % and the highest tensile strength (24.37 ± 0.22 MPa). The addition of MWCNTs has a positive effect on surface roughness and hydrophilicity. The formation of calcium phosphate sediments on the surface of the scaffolds after immersion in SBF is observed by SEM and verified by EDS and XRD analysis.MG63 cells were well cultured on the scaffold containing MWCNTs and presented more cell viability, ALP secretion, calcium deposition and gene expression compared to the scaffolds without MWCNTs. The PHB-starch-1wt.%MWCNTs scaffold can be considerable for studies of supplemental bone tissue engineering applications.

Pickering emulsion hydrogel based on alginate-gellan gum with carboxymethyl chitosan as a pH-responsive controlled release delivery system

Pickering emulsion hydrogels (PEHs) were developed as a pH-responsive, controlled-release delivery system to address the limitations of Pickering emulsions in some harsh processing or gastrointestinal conditions. Specifically, the PEHs were fabricated based on alginate and various concentrations of gellan gum (GG) with carboxymethyl chitosan (CMCS) matrix. The encapsulation efficiency (EE), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) results proved the successful encapsulation. Furthermore, the hydrogels remained stable in the presence of destabilizing ions (Na⁺ or phosphate ions) and high osmotic pressure mediums. The texture profile analysis (TPA) characteristics and Young's modulus of the 0.8 % GG (w/v) PEHs were superior to the others. The PEHs prevented the emulsions from being released at pH 2.0, while the emulsions were entirely released at pH 7.4 in vitro, with the rate of release controlled by CMCS and the degree by GG concentration. This work facilitates the delivery of Pickering emulsions with excellent stability and pH-responsive controlled release for hydrophobic actives in food applications.

Electrospun halloysite nanotube loaded polyhydroxybutyrate-starch fibers for cartilage tissue engineering

Articular cartilage is a connective load-bearing tissue with a low rate of regeneration due to slow metabolism. Fabricating tissue-like structure modified based on natural features can improve healing process. Fibrous scaffolds based on the composition of hydrophobic polyhydroxybutyrate (PHB) and hydrophilic starch reinforced using halloysite nanotubes (HNTs) with appropriate physico-chemical and biological properties was produced via electrospinning technique for long-term applications like cartilage regeneration. Textural properties were analyzed through SEM imaging that showed incorporating HNTs up to 2 wt% decreased mean fiber diameter to 158 ± 48 nm with larger pore size and appropriate porosity percentage. Moreover, the tensile strength was improved up to 4.21 ± 0.31 MPa after HNTs incorporation support chondrocyte cell growth. Furthermore, incorporating HNTs induced surface hydrophilicity and in vitro degradation. The biological assays both MTT assay and cell attachment of chondrocyte cells on 2 wt% HNTs incorporated into PHB-starch fibers indicated that HNTs incorporation can support cell growth and attachment without any toxicity for biomedical applications. To conclude, the obtained results demonstrated PHB-starch/HNTs fibrous scaffold could be potential for further experimental studies for tissue engineering applications like cartilage.

Synthesis of pH-Sensitive Cross-Linked Basil Seed Gum/Acrylic Acid Hydrogels by Free Radical Copolymerization Technique for Sustained Delivery of Captopril

The pH-sensitive polymeric matrix of basil seed gum (BSG), with two different monomers, such as acrylic acid (AA) and N, N-Methylene-bis-acrylamide (MBA), was selected to use in hydrogels preparation through a free radical copolymerization technique using potassium per sulfate (KPS) as a cross linker. BSG, AA and MBA were used in multiple ratios to investigate the polymer, monomer and initiator effects on swelling properties and release pattern of captopril. Characterization of formulated hydrogels was done by FTIR, DSC/TGA, XRD and SEM techniques to confirm the stability. The hydrogels were subjected to a variety of tests, including dynamic swelling investigations, drug loading, in vitro drug release, sol–gel analyses and rheological studies. FTIR analysis confirmed that after the polymeric reaction of BSG with the AA monomer, AA chains grafted onto the backbone of BSG. The SEM micrographs illustrated an irregular, rough, and porous form of surface. Gel content was increased by increasing the contents of polymeric gum (BSG) with monomers (AA and MBA). Acidic and basic pH effects highlighted the difference between the swelling properties with BSG and AA on increasing concentration. Kinetic modelling suggested that Korsmeyer Peppas model release pattern was followed by the drug with the non-Fickian diffusion mechanism.

Assessment of Ultrasonic Stress on Survival and β-Glucosidase Activity of Encapsulated Lactiplantibacillus plantarum BCRC 10357 in Fermentation of Black Soymilk

The enhanced β-glucosidase activity of encapsulated Lactiplantibacillus plantarum BCRC 10357 within calcium alginate capsules was investigated by ultrasonic stimulation to induce the stress response of the bacteria for the biotransformation of isoflavones in black soymilk. The effects of various ultrasound durations, sodium alginate concentrations (% ALG), and cell suspensions on the β-glucosidase activity of encapsulated bacteria were explored. The β-glucosidase activity of encapsulated L. plantarum BCRC 10357 with ultrasonic stimulation (40 kHz/300 W) was greater than that without ultrasound. With 20 min of ultrasonic treatment, the β-glucosidase activity of encapsulated L. plantarum BCRC 10357 from 2% ALG/0.85% NaCl cell suspension was 11.47 U/mL at 12 h, then increased to 27.43 U/mL at 36 h and to 26.25 U/mL at 48 h in black soymilk at 37 °C, showing the high adaptation of encapsulated L. plantarum BCRC 10357 encountering ultrasonic stress to release high β-glucosidase until 48 h, at which point the ratio of isoflavone aglycones (daidzein and genistein) in total isoflavones (daidzin, genistin, daidzein, and genistein) was 98.65%, reflecting the effective biotransformation of isoflavone glycosides into aglycones by β-glucosidase. In this study, the survivability and β-glucosidase activity of encapsulated L. plantarum BCRC 10357 were enhanced under ultrasonic stimulation, and were favorably used in the fermentation of black soymilk.

F-GO/sodium alginate composite hydrogels for tissue regeneration and antitumor applications

Biopolymers have attracted tremendous attention for wound applications. Since sodium alginate is a biopolymer, they offer excellent therapeutic options with long-term drug release and low side effects. To prepare multifunctional composite hydrogels with anticancer and tissue regeneration capabilities, sodium alginate (SA) and graphene oxide (GO) were covalently linked and crosslinked with tetraethyl orthosilicate (TEOS) by the solvothermal method. The structural and morphological results show that the hydrogels exhibit the desired functionality and porosity. The swelling of hydrogels in an aqueous and PBS medium was investigated. SGT-4 had the highest swelling in both aqueous and PBS media. Swelling and biodegradation of the hydrogel were inversely related. The drug release of SGT-4 was determined in different pH media (pH 6.4, 7.4, and 8.4) and the kinetics of drug release was determined according to the Higuchi model (R2 = 0.93587). Antibacterial activities were evaluated against severe infectious agents. Uppsala (U87) and osteoblast (MC3T3-E1) cell lines were used to determine the anticancer and biocompatibility of the composite hydrogels, respectively. These results suggest that the composite hydrogels could be used as wound dressings.

Construction of disulfide containing redox-responsive polymeric nanomedicine

Disulfide bonds (S-S) are widely found in chemistry, biology, and materials science. Polymer nanomaterials containing disulfide bonds with a variety of excellent properties have great potential as drug and gene delivery carriers. The disulfide bond can exist stably in extracellular environment, but upon entering cancer cells, it will undergo a sulfhydryl-disulfide bond exchange reaction with glutathione (GSH) in the cytoplasm, causing the disulfide bond cleavage. Therefore, polymeric nanomaterials containing disulfide bonds are promising in cancer treatment due to the elevated GSH concentration inside cancer cells. This review highlights various synthetic approaches to prepare disulfide containing redox-responsive polymeric nanomedicine, including synthesis of disulfide bonds containing polymers, construction of polymeric nanoparticle with shell or core crosslinked disulfide bonds, preparation of polymer-drug conjugates via disulfide linkers, and disulfide linked responsive payloads.

A Novel Three-Polysaccharide Blend In Situ Gelling Powder for Wound Healing Applications

In this paper, alginate/pectin and alginate/pectin/chitosan blend particles, in the form of an in situ forming hydrogel, intended for wound repair applications, have been successfully developed. Particles have been used to encapsulate doxycycline in order to control the delivery of the drug, enhance its antimicrobial properties, and the ability to inhibit host matrix metalloproteinases. The presence of chitosan in the particles strongly influenced their size, morphology, and fluid uptake properties, as well as drug encapsulation efficiency and release, due to both chemical interactions between the polymers in the blend and interactions with the drug demonstrated by FTIR studies. In vitro antimicrobial studies highlighted an increase in antibacterial activity related to the chitosan amount in the powders. Moreover, in situ gelling powders are able to induce a higher release of IL-8 from the human keratinocytes that could stimulate the wound healing process in difficult-healing. Interestingly, doxycycline-loaded particles are able to increase drug activity against MMPs, with good activity against MMP-9 even at 0.5 μg/mL over 72 h. Such results suggest that such powders rich in chitosan could be a promising dressing for exudating wounds.

Recent Advances in Microfluidically Spun Microfibers for Tissue Engineering and Drug Delivery Applications

In recent years, the unique and tunable properties of microfluidically spun microfibers have led to tremendous advancements for the field of biomedical engineering, which have been applied to areas such as tissue engineering, wound dressing, and drug delivery, as well as cell encapsulation and cell seeding. In this article, we analyze the most recent advances in microfluidics and microfluidically spun microfibers, with an emphasis on biomedical applications. We explore in detail these new and innovative experiments, how microfibers are made, the experimental purpose of making microfibers, and the future work that can be done as a result of these new types of microfibers. We also focus on the applications of various materials used to fabricate microfibers, as well as their many promises and limitations.

Advances in carbohydrate-based polymers for the design of suture materials: A review

Suture materials constitute one of the largest biomedical material groups with a huge global market of $ 1.3 billion annually and employment in over 12 million procedures per year. Suture materials have radically evolved over the years, from basic strips of linen to more advanced synthetic polymer sutures. Yet, the journey to the ideal suture material is far from over and we now stand on the brink of a new era of improved suture materials with greater safety and efficacy. This next step in the evolutionary timeline of suture materials, involves the use of natural, carbohydrate polymers that have, until recent years, never before been considered for suture material applications. This review exposes the latest and most important advancements in suture material development while digging deep into how natural, carbohydrate polymers can serve to advance this field.

Alginate and alginate composites for biomedical applications

Alginate is an edible heteropolysaccharide that abundantly available in the brown seaweed and the capsule of bacteria such as Azotobacter sp. and Pseudomonas sp. Owing to alginate gel forming capability, it is widely used in food, textile and paper industries; and to a lesser extent in biomedical applications as biomaterial to promote wound healing and tissue regeneration. This is evident from the rising use of alginate-based dressing for heavily exuding wound and their mass availability in the market nowadays. However, alginate also has limitation. When in contact with physiological environment, alginate could gelate into softer structure, consequently limits its potential in the soft tissue regeneration and becomes inappropriate for the usage related to load bearing body parts. To cater this problem, wide range of materials have been added to alginate structure, producing sturdy composite materials. For instance, the incorporation of adhesive peptide and natural polymer or synthetic polymer to alginate moieties creates an improved composite material, which not only possesses better mechanical properties compared to native alginate, but also grants additional healing capability and promote better tissue regeneration. In addition, drug release kinetic and cell viability can be further improved when alginate composite is used as encapsulating agent. In this review, preparation of alginate and alginate composite in various forms (fibre, bead, hydrogel, and 3D-printed matrices) used for biomedical application is described first, followed by the discussion of latest trend related to alginate composite utilization in wound dressing, drug delivery, and tissue engineering applications.

Starch modified alginate nanoparticles for drug delivery application

Natural polymers have been widely studied as vehicles that have gained much interest in the encapsulation and delivery of drugs and bioactive molecules. In this study, we developed starch-modified alginate nanoparticles using a green facile technique for drug delivery application. The potential of the prepared nanoparticles for controlled drug delivery applications is demonstrated using theophylline and bovine serum albumin as model drugs. The nanoparticles possessed the encapsulation efficiency of 60 to 75%. The results of in vitro drug release studies showed the pH dependent characteristics of the prepared nanoparticles. In vitro cytotoxicity test revealed the biocompatibility of the developed nanoparticles against L929 fibroblast cell lines. The in vitro cellular uptake of nanoparticles was visualized in L929 fibroblast cells using fluorescent microscopy. The preliminary investigation suggests the developed nanoparticle is a promising candidate for drug delivery application.

Long-term antibacterial composite via alginate aerogel sustained release of antibiotics and Cu used for bone tissue bacteria infection

Bone related-bacterial diseases including wound infections and osteomyelitis (OM) remain a serious problem accompanied with amputation in most severe cases. In this work, we report an exceptional effective antibacterial alginate aerogel, which consists of tigecycline (TGC) and octahedral Cu crystal as an organo-inorganic synergy platform for antibacterial and local infection therapy applications. The alginate aerogel could greatly prolong the release of copper ions and maintain effective antibacterial concentration over 18 days. The result of in-vitro experiments demonstrated that the alginate aerogel has an exceptional effective function on antibacterial activity. Cytotoxicity tests indicated that the alginate aerogel has low biological toxicity (average cell viability >75%). These remarkable results suggested that the alginate aerogel exhibits great potential for the treatment of OM, and has a prosperous future of application in bone tissue engineering.

Highly effective antibacterial zeolitic imidazolate framework-67/alginate fibers

Antibacterial fibers have great potential in many applications including wound dressings, surgical gowns, and surgical sutures, and play an important role in our daily life. However, the traditional fabrication method for the antibacterial fibers shows high cost, complexity, and inferior antibacterial durability. Herein, we report a facile and scalable fabrication of highly effective antibacterial alginate (SA) composite fibers through blend spinning of zeolitic imidazolate framework-67 (ZIF-67) particles and SA. The fabricated ZIF-67@SA composite fibers show high tensile strength and initial modulus. More importantly, the ZIF-67@SA composite fibers demonstrate excellent antibacterial properties, and the antibacterial efficiency reaches over 99% at ultralow ZIF-67 loading (0.05 wt%). In addition, the ZIF-67@SA fibers show good antibacterial durability even after five laundering cycles. The excellent antibacterial performance of the ZIF-67@SA fibers is attributed to the synergistic effects of the highly effective antibacterial ZIF-67 particles, swelling of alginate, and immobilization of ZIF-67 particles both inside and outside the fiber surface. This work may shed light on the antibacterial mechanism of metal organic frameworks and pave the way for the development of high-performance antibacterial textiles.

Antibacterial photodynamic activity of photosensitizer-embedded alginate-pectin-carboxymethyl cellulose composite biopolymer films

Antimicrobial photodynamic therapy (APDT) is a promising approach for treatment of wounds infected with antibiotic-resistant bacteria. In this approach, delivery of appropriate concentration of photosensitizer (PS) at the infected site is a critical step; it is therefore essential that PS need to be administered at the infected site in a suitable formulation. Here, we report preparation of PS-embedded composite biopolymer films and their photobactericidal properties against methicillin-resistant Staphylococcus aureus (MRSA) and biocompatibility. Sodium alginate (SA), pectin (PC), and carboxymethyl cellulose (CMC) were used for preparing films containing chlorin p₆ (Cp₆, anionic PS) or methylene blue (MB, cationic PS). Films containing 1% CMC (15 mm diameter; 110 ± 09 μm thickness) showed ~ 55% light transmission in 500 to 750 nm region and high swelling rate as indicated by ~ 38% increase in diameter within 1 h. Absorption spectroscopic studies of PS-embedded films revealed that while Cp₆ existed mainly in monomeric state, MB existed in both dimeric and monomeric forms. MRSA incubated with the film for 1 h displayed substantial uptake of Cp₆ and MB as indicated by the presence of Cp₆ fluorescence and MB staining in cells under the microscope. Furthermore, photodynamic treatment (660 nm, 10 J/cm²) of MRSA with Cp₆ embedded in film or free Cp₆ resulted in ~ 3 log reduction in colony-forming units (cfu), whereas decrease in cfu was less (~ 1 log) for MB-embedded film than for free MB (~ 6 logs). Studies on human keratinocyte (HaCaT) cells showed that there was no significant change in the viability of cells when they were incubated with solubilized films (plain) for 24 h or subjected to treatment with PS-containing films followed by PDT. These results suggest that films are biocompatible and have potential application in photodynamic treatment of MRSA-infected wounds.

Agar-based edible films for food packaging applications - A review

Agar is a biopolymer extracted from certain red algae. The continuous and transparent film made from agar gum is becoming a common and renewable alternative for plastic-based food packaging materials. However, plain agar film suffers from brittleness, high moisture permeability, and poor thermal stability. Considerable researches have been devoted to improving the properties of agar films to extend their applications. These include reinforcements by nanomaterials, blending with other biopolymers, and incorporating plasticizers, hydrophobic components, or antimicrobial agents into their structure. This article comprehensively reviews the functional properties and defects of edible films made from agar gum. Also, it describes various strategies and components used to make an agar film with desirable properties. Moreover, the applications of agar-based edible films with improved functionality for food packaging are discussed.

Robust ZIF-8/alginate fibers for the durable and highly effective antibacterial textiles

Antibacterial fibers have great potential in many applications, such as medical dressings, surgical sutures and masks, etc. owing to their good growth inhibition against bacteria. However, for the fabrication of antibacterial fibers, the traditional inorganic nanoparticles coating method shows the disadvantages of high cost, low stability and binding fastness. Herein, we develop a facile, scalable and cost-effective blend spinning strategy to fabricate the highly effective antibacterial zeolitic imidazolate framework-8@alginate (ZIF-8@SA) fibers through wet spinning of the mixture of ZIF-8 and SA. The fabricated ZIF-8@SA fibers show high antibacterial efficiency, good durability and high tensile strength. The antibacterial performance of ZIF-8@SA fibers is superior to the most reported inorganic nanoparticles modified fibers. The excellent antibacterial performance of ZIF-8@SA fibers is attributed to the reactive oxygen species from the ZIF-8 and the swelling of SA. This work may shed light on the antibacterial mechanisms of metal organic frameworks and pave the way for the development of high-performance, durable and highly effective antibacterial textiles.

Chitosan-Coated Alginate Nanoparticles Enhanced Absorption Profile of Insulin Via Oral Administration

BACKGROUND

In this study, four nanoparticle formulations (F1 to F4) comprising varying ratios of alginate, Pluronic F-68 and calcium chloride with a constant amount of insulin and chitosan as a coating material were prepared using polyelectrolyte complexation and ionotropic gelation methods to protect insulin against enzymatic degradation.

METHODS

This study describes the formulation design, optimisation, characterisation and evaluation of insulin concentration via oral delivery in rats. A reversed-phase high-performance liquid chromatography (HPLC) method was developed and validated to quantify insulin concentration in rat plasma. The proposed method produced a linear response over the concentration range of 0.39 to 50 µg/ml.

RESULTS

In vitro release study showed that dissolution of insulin in simulated gastric juice of pH 1.2 was prevented by alginate core and chitosan coating but rapidly released in simulated intestinal fluid (pH 6.8). Additionally, Formulation 3 (F3) has a particle size of 340.40 ± 2.39 nm with narrow uniformity exhibiting encapsulation efficiency (EE) of 72.78 ± 1.25 % produced highest absorption profile of insulin with a bioavailability of 40.23 ±1.29% and reduced blood glucose after its oral administration in rats.

CONCLUSION

In conclusion, insulin oral delivery system containing alginate and chitosan as a coating material has the ability to protect the insulin from enzymatic degradation thus enhance its absorption in the intestine. However, more work should be done for instance to involve human study to materialise this delivery system for human use.

Potential of novel electrospun core-shell structured polyurethane/starch (hyaluronic acid) nanofibers for skin tissue engineering: In vitro and in vivo evaluation

The biomaterials with excellent biocompatibility and biodegradability ¬can lead to satisfactory wound healing. In this study, core-shell structured PU (polyurethane)/St (Starch) and PU/St (Hyaluronic Acid (HA)) nanofibers were fabricated with coaxial electrospinning technique. The morphology characterization of the core-shell structure of nanofibers was investigated by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images. Contact-angle measurements were confirmed the core/shell structure of the electrospun nanofibers with shell and core feed rates of 0.675 L/min and <0.135 L/min, respectively. The average fiber diameter values were calculated for polyurethane nanofibers (836 ± 172.13 nm), PU/St nanofibers (612 ± 93.21 nm) and PU/St (HA) nanofibers (428 ± 78.32 nm). The average porosity values of scaffolds were determined for PU (1.251 ± 0.235 μm), PU/St (1.734 ± 0.284 μm) and PU/St (HA) (3.186 ± 0.401 μm). The core-shell PU/St and PU/St (HA) nanofibers were evaluated in vitro by using mouse fibroblasts (L929) cells. Cell morphology and viability results were exhibited significant enhancement in cell promoting and cell attachment. Furthermore, in vivo studies was indicated Core-shell PU/St (HA) wound dressing can be an appropriate candidate for skin tissue engineering and wound healing.

Synergistic effect of cellulose nanofibres and bio- extracts for fabricating high strength sodium alginate based composite bio-sponges with antibacterial properties

This study investigates the synergistic potential of natural bio-extracts for preparing "all-natural" composite bio-sponges of sodium alginate (SA) with the reinforcement of a natural bio-nanomaterial i.e., cellulose nanofibres (CNFs). Aqueous suspensions of SA and CNFs in various combinations of bio-extracts (Rice water (Rw) and Giloy extract (Ge)) were freeze-dried to obtain the composite bio-sponges. Composites prepared using Rw resulted in structurally more stable samples with porosity above 75% that showed a compact honeycomb-like microstructure with interlocked CNFs network structures. A significant improvement in mechanical performance (400% increment in compressive strength and 800% increment in modulus) and thermal stability (decomposition temperature reaching up to 240 °C from 200 °C) for SA based composite bio-sponges was achieved due to the synergistic effect of Rw and CNFs as compared to conventionally prepared sponges in water. Additionally, the use of Ge has resulted in developing antimicrobial surfaces with up to 98% and 90% growth inhibition efficiency for gram-negative and gram-positive bacteria, respectively. Hence, CNFs and bio-extracts together played a competent role in effective tailoring of structural, thermo-mechanical and antibacterial properties of composite bio-sponges.

Functional polymeric dialdehyde dextrin network capped mesoporous silica nanoparticles for pH/GSH dual-controlled drug release

Multi-stimulation responsive nanomaterial-based drug delivery systems promise enhanced therapeutic efficacy in cancer therapy. This work examines a smart pH/GSH dual-responsive drug delivery system by using dialdehyde dextrin (DAD) end-capped mesoporous silica nanoparticles (MSNs). Specifically, DAD was applied as a "gatekeeper polymer" agent to seal drug loads inside the mesoporous of MSNs via a pH-sensitive Schiff bond, whereas the formed DAD polymer shells were further cross-linked by GSH-sensitive disulfide bonds. Results revealed that the DAD gatekeeper polymer could tightly close the mesopores of MSNs to control premature drug release under physiological conditions and respond to acidic and GSH conditions to release the trapped drugs. Significantly, fluorescent microscopy observation and cytotoxicity studies indicated that drug-loaded nanoparticles could be rapidly internalized through a passive targeting effect to inhibit cancer growth. Taken together, these polymer-modified pH/GSH dual-responsive MSNs could be used as promising candidates for "on-demand" anticancer drug delivery applications.

Modulating the release of proteins from a loaded carrier of alginate/gelatin porous spheres immersed in different solutions

BACKGROUND

A biodegradable porous particle for the controlled biofactor delivery which assembly of pores in scaffolds can improve the permeation and diffusion of drugs or growth factors.

OBJECTIVE

Porous-spheres in millimeter scale were prepared by mixing sodium alginate and gelatin interpenetrating networks with cross-linkers; interconnected open pores were fabricated through solvent casting and particulate leaching.

METHODS

Morphological characteristics, degradation, and bovine serum albumin (BSA) release rates of the porous-spheres immersed in three different solutions, namely, deionized distilled water, simulated body fluid (SBF), and phosphate-buffered saline (PBS), were detected.

RESULTS

Porous-spheres with a large amount of gelatin exhibited an increase in water absorption rates without affecting scaffold strength and no cytotoxicity was elicited. Highly interconnected pores with a diameter of 100-200 µm were uniformly distributed in scaffolds. The weight loss in PBS was faster than that in other solutions; the highest release rate of BSA in SBF was observed for 2 h. The release rates also exhibited linear patterns from 2 h to 24 h in all of the groups.

CONCLUSIONS

After 1 d of immersion in solutions, BSA release rates in scaffolds logarithmically decreased for 14 d. The degradation of porous-spheres also showed an inverse pattern.

Starch/PCL composite nanofibers by co-axial electrospinning technique for biomedical applications

BACKGROUND

In this study, starch and polycaprolactone (PCL), composite nanofibers were fabricated by co-axial needle electrospinning technique. Processing parameters such as polymer concentration, flow rate and voltage had a marked influence on the composite fiber diameter. Fourier transform infrared spectroscopy, scanning electron microscopy (SEM), mechanical and physical properties (such as density, viscosity and electrical conductivity) of the composite fibres were evaluated. Moreover, a cell culture test was performed in order to determine their cytotoxicity for wound dressing application.

RESULTS

The effect of starch ratio in the solution on the properties and morphological structure of the fibers produced was presented. With lower starch concentration values, the fibers have greater ultimate tensile strength characteristic (mostly 4 and 5 wt%). According to SEM results, it can be figured out that the nanofibers fabricated have good spinnability and morphology. The mean diameter of the fibers is about 150 nm. According to results of cell culture study, the finding can be determined that the increase of starch in the fiber also increases the cell viability.

CONCLUSIONS

Composite nanofibers of starch/PCL have been prepared using a co-axial needle electrospinning technique. PCL was successfully encapsulated within starch. Fiber formation was observed for different ratio of starch. With several test, analysis and measurement performed, some important parameters such as quality and effectuality of each fiber obtained for wound dressing applications were discussed in detail.