Fabrication of alginate/nanoTiO2 needle composite scaffolds for tissue engineering applications

Biological applications study of bio-nanocomposites based on chitosan/TiO2 nanoparticles polymeric films modified by oleic acid

The aim of the present study was to prepare and characterize nanocomposite films to improve the treatment of skin wounds by applying the film as a bandage. To modify chitosan (Cs) and to prepare nanocomposites, a mixture between titanium dioxide nanoparticles (TiO₂ NPs) was performed at different concentrations (2, 5, 10 and 15 wt%) and oleic acid (OA). The thin nanocomposite films were prepared by using casting method. The prepared films (Cs, Cs/TiO₂ NPs, Cs/OA and Cs/OA/TiO₂ NPs) were described by water absorption (swelling study) and biological degradation. Physico-chemical characterizations of Cs, Cs/OA, Cs/TiO₂ NPs and Cs/OA/TiO₂ NPs (with only 15 wt% TiO₂ NPs) films were determined by X-ray diffraction, transmission high-resolution electron microscopy, field emission scanning electron microscopy, thermal analysis and Fourier transform infrared spectroscopy as well as their mechanical properties. Antimicrobial activity against microorganisms has been studied to assess activity against bacteria. The prepared nanocomposite films showed good antimicrobial activity for both Gram-positive and Gram-negative bacteria. The therapeutic effects of Cs-TiO₂ NPs-oleic acid nanocomposites on healing excision wounds were studied in rat animal model. The data obtained revealed that groups treated with nanocomposites showed enhancement wound closure and speed up wound healing time.

Chitosan-TiO2: A Versatile Hybrid Composite

In recent years, a strong interest has emerged in hybrid composites and their potential uses, especially in chitosan–titanium dioxide (CS–TiO₂) composites, which have interesting technological properties and applications. This review describes the reported advantages and limitations of the functionalization of chitosan by adding TiO₂ nanoparticles. Their effects on structural, textural, thermal, optical, mechanical, and vapor barrier properties and their biodegradability are also discussed. Evidence shows that the incorporation of TiO₂ onto the CS matrix improves all the above properties in a dose-dependent manner. Nonetheless, the CS–TiO₂ composite exhibits great potential applications including antimicrobial activity against bacteria and fungi; UV-barrier properties when it is used for packaging and textile purposes; environmental applications for removal of heavy metal ions and degradation of diverse water pollutants; biomedical applications as a wound-healing material, drug delivery system, or by the development of biosensors. Furthermore, no cytotoxic effects of CS–TiO₂ have been reported on different cell lines, which supports their use for food and biomedical applications. Moreover, CS–TiO₂ has also been used as an anti-corrosive material. However, the development of suitable protocols for CS–TiO₂ composite preparation is mandatory for industrial-scale implementation.

Hybrid Polyester-Hydrogel Electrospun Scaffolds for Tissue Engineering Applications

Electrospinning is an attractive fabrication process providing a cost-effective and straightforward technic to make extra-cellular matrix (ECM) mimicking scaffolds that can be used to replace or repair injured tissues and organs. Synthetic polymers as poly (ε-caprolactone) (PCL) and poly (ethylene oxide terephthalate)-poly(butylene terephthalate) (PEOT/PBT) have been often used to produce scaffolds due to their good processability, mechanical properties, and suitable biocompatibility. While synthetic polymers can mimic the physical features of native ECM, natural polymers like alginate are better suited to recapitulate its hydrated state or introduce functional groups that are recognized by cells (e.g., -NH2). Thus, this study aims at creating electrospun meshes made of blended synthetic and natural polymers for tissue engineering applications. Polyethylene oxide (PEO), PCL, and PEOT/PBT were used as a carrier of Alginate. Scaffolds were electrospun at different flow rates and distances between spinneret and collector (air gap), and the resulting meshes were characterized in terms of fiber morphology, diameter, and mesh inter-fiber pore size. The fiber diameter increased with increasing flow rate, while there was no substantial influence of the air gap. On the other hand, the mesh pore size increased with increasing air gap, while the effect of flow rate was not significant. Cross-linking and washing of alginate electrospun scaffolds resulted in smaller fiber diameter. These newly developed scaffolds may find useful applications for tissue engineering strategies as they resemble physical and chemical properties of tissue ECM. Human Dermal Fibroblasts were cultured on PCL and PCL/Alginate scaffolds in order to create a dermal substitute.

Natural and synthetic polymers/bioceramics/bioactive compounds-mediated cell signalling in bone tissue engineering

Bone is a highly integrative and dynamic tissue of the human body. It is continually remodeled by bone cells such as osteoblasts, osteoclasts. When a fraction of a bone is damaged or deformed, stem cells and bone cells under the influence of several signaling pathways regulate bone regeneration at the particular locale. Effective therapies for bone defects can be met via bone tissue engineering which employs drug delivery systems with biomaterials to enhance cellular functions by acting on signaling pathways such as Wnt, BMP, TGF-β, and Notch. This review provides the current understanding of polymers/bioceramics/bioactive compounds as scaffolds in activation of signaling pathways for the formation of bone.

Effect of Different Manufacturing Methods on the Conflict between Porosity and Mechanical Properties of Spiral and Porous Polyethylene Terephthalate/Sodium Alginate Bone Scaffolds

In order to solve the incompatibility between high porosity and mechanical properties, this study fabricates bone scaffolds by combining braids and sodium alginate (SA) membranes. Polyethylene terephthalate (PET) plied yarns are braided into hollow, porous three dimensional (3D) PET braids, which are then immersed in SA solution, followed by cross-linking with calcium chloride (CaCl₂) and drying, to form PET bone scaffolds. Next, SA membranes are rolled and then inserted into the braids to form the spiral and porous PET/SA bone scaffolds. Samples are finally evaluated for surface observation, porosity, water contact angle, compressive strength, and MTT assay. The test results show that the PET bone scaffolds and PET/SA bone scaffolds both have good hydrophilicity. An increasing number of layers and an increasing CaCl₂ concentration cause the messy, loose surface structure to become neat and compact, which, in turn, decreases the porosity and increases the compressive strength. The MTT assay results show that the cell viability of differing SA membranes is beyond 100%, indicating that the PET/SA bone scaffolds containing SA membranes are biocompatible for cell attachment and proliferation.

Design of biocomposite materials for bone tissue regeneration

Several synthetic scaffolds are being developed using polymers, ceramics and their composites to overcome the limitations of auto- and allografts. Polymer-ceramic composites appear to be the most promising bone graft substitute since the natural bone itself is a composite of collagen and hydroxyapatite. Ceramics provide strength and osteoconductivity to the scaffold while polymers impart flexibility and resorbability. Natural polymers have an edge over synthetic polymers because of their biocompatibility and biological recognition property. But, very few natural polymer-ceramic composites are available as commercial products, and those few are predominantly based on type I collagen. Disadvantages of using collagen include allergic reactions and pathogen transmission. The commercial products also lack sufficient mechanical properties. This review summarizes the recent developments of biocomposite materials as bone scaffolds to overcome these drawbacks. Their characteristics, in vitro and in vivo performance are discussed with emphasis on their mechanical properties and ways to improve their performance.

Development and characterization of novel porous 3D alginate-cockle shell powder nanobiocomposite bone scaffold

A novel porous three-dimensional bone scaffold was developed using a natural polymer (alginate/Alg) in combination with a naturally obtained biomineral (nano cockle shell powder/nCP) through lyophilization techniques. The scaffold was developed in varying composition mixture of Alg-nCP and characterized using various evaluation techniques as well as preliminary in vitro studies on MG63 human osteoblast cells. Morphological observations using SEM revealed variations in structures with the use of different Alg-nCP composition ratios. All the developed scaffolds showed a porous structure with pore sizes ideal for facilitating new bone growth; however, not all combination mixtures showed subsequent favorable characteristics to be used for biological applications. Scaffolds produced using the combination mixture of 40% Alg and 60% nCP produced significantly promising results in terms of mechanical strength, degradation rate, and increased cell proliferation rates making it potentially the optimum composition mixture of Alg-nCP with future application prospects.

In vitro gene expression and preliminary in vivo studies of temperature-dependent titania–graphene nanocomposites for bone replacement applications

To meet the demand for biomaterials due to increasing bone defects and damage, we sought to synthesize titania–graphene nanocomposites at different sintering temperatures and then optimize them to explore their potential applications in biomaterials.

Single step hydrothermal synthesis of hierarchical TiO2 microflowers with radially assembled nanorods for enhanced photovoltaic performance

Herein, 3D hierarchical TiO₂ microflowers with a well faceted profile and high crystallinity were successfully obtained via a surfactant directed single step facile hydrothermal technique.

Evaluation of biocomposite films containing alginate and sago starch impregnated with silver nano particles

In recent years, the metal nanoparticles/polymer composites have created lot of attraction due to their wide range of applications. In the present study, the composite films of alginate (AL) and sago starch (SG) impregnated with silver nano particles (AgNP) with and without antibiotic gentamicin (G) were prepared by solvent casting method. The films prepared were characterized for thermo gravimetric analysis, SEM, TEM and mechanical properties and the results have shown the composite nature of the films. AL-SG-AgNP and AL-SG-AgNP-G composites were used as wound dressing materials in experimental wounds of rats. The healing pattern of the wounds was evaluated by planimetric studies, macroscopic observations, biochemical studies and histopathological observations. The results have shown faster healing pattern in the wounds treated with AL-SG-AgNP and AL-SG-AgNP-G composites compared to untreated control. This study revealed that AL-SG-AgNP film might be a potential and economical wound dressing material.