Process, optimization and characterization of mebeverine hydrochloride loaded guar gum microspheres for irritable bowel syndrome

Preparation and Characterization of a Novel Multiparticulate Dosage Form Carrying Budesonide-Loaded Chitosan Nanoparticles to Enhance the Efficiency of Pellets in the Colon

An attempt was made to conquer the limitation of orally administered nanoparticles for the delivery of budesonide to the colon. The ionic gelation technique was used to load budesonide on chitosan nanoparticles. The nanoparticles were investigated in terms of size, zeta potential, encapsulation efficiency, shape and drug release. Then, nanoparticles were pelletized using the extrusion-spheronization method and were investigated for their size, mechanical properties, and drug release. Pellets were subsequently coated with a polymeric solution composed of two enteric (eudragit L and S) and time-dependent polymers (eudragit RS) for colon-specific delivery. All formulations were examined for their anti-inflammatory effect in rats with induced colitis and the relapse of the colitis after discontinuation of treatment was also followed. The size of nanoparticles ranged between 288 ± 7.5 and 566 ± 7.7 nm and zeta potential verified their positive charged surface. The drug release from nanoparticles showed an initial burst release followed by a continuous release. Pelletized nanoparticles showed proper mechanical properties and faster drug release in acidic pH compared with alkaline pH. It was interesting to note that pelletized budesonide nanoparticles released the drug throughout the GIT in a sustained fashion, and had long-lasting anti-inflammatory effects while rapid relapse was observed for those treated with conventional budesonide pellets. It seems that there is a synergistic effect of nanoformulation of budesonide and the encapsulation of pelletized nanoparticles in a proper coating system for colon delivery that could result in a significant and long-lasting anti-inflammatory effect.

Developed meloxicam loaded microparticles for colon targeted delivery: Statistical optimization, physicochemical characterization, and in-vivo toxicity study

The study aimed to fabricate and evaluate Meloxicam (MLX) loaded Hydroxypropyl Methylcellulose (HPMC) microparticles for colon targeting because MLX is a potent analgesic used in the treatment of pain and inflammation associated with colorectal cancer (CRC). Nevertheless, its efficiency is limited by poor solubility and gastrointestinal tracts (GIT) associated side effects. Seventeen formulations of MLX loaded HPMC microparticles were fabricated by the oil-in-oil (O/O)/ emulsion solvent evaporation (ESE) technique. A 3-factor, 3-level Box Behnken (BBD) statistical design was used to estimate the combined effects of the independent variables on the dependent variables (responses), such as the percent yield (R1), the entrapment efficiency (EE) (R2), mean particle size (R3) and in vitro percentage of cumulative drug release (R4). For physicochemical characterization FTIR, XRD, DSC, and SEM analyses were performed. Biocompatibility and non-toxicity were confirmed by in-vivo acute oral toxicity determination. The percentage yield and EE were 65.75-90.71%, and 70.62-88.37%, respectively. However, the mean particle size was 62.89-284.55 μm, and the in vitro cumulative drug release percentage was 74.25-92.64% for 24 hours. FTIR analysis showed that the composition of the particles was completely compatible, while XRD analysis confirmed the crystalline nature of the pure drug and its transition into an amorphous state after formulation. DSC analysis revealed the thermal stability of the formulations. The SEM analysis showed dense spherical particles. The toxicity study in albino rabbits showed no toxicity and was found biocompatible. The histopathological evaluation showed no signs of altered patterns. Results of this study highlighted a standard colonic drug delivery system with the ability to improve patient adherence and reduce GIT drug-associated side effects in CRC treatment.

Superhydrophobic Surface for Enhancing the Bioavailability of Salbutamol Sulfate from Cross-Linked Microspheres: Formulation, Characterization, and in vivo Evaluation

Introduction

The aim of the work was to formulate salbutamol sulfate (SB) microspheres by using superhydrophobic surface (SHS) under different processing factors for improving its encapsulation efficiency, controling its release rate, and hence enhancing its bioavailability.

Methods

Cross-linked microspheres of chitosan (CN) and carrageenan (KN) were made on a SHS under a glutaraldehyde-saturated atmosphere. The formulations were designed and optimized based on 4² factorial design. Percentage encapsulation efficiency (%EE), particle size, swelling ratio, and in vitro release rate were characterized, and the in vivo performance of optimized formula was investigated in beagle dogs.

Results

The results showed that the prepared microspheres have a high %EE (97.11±0.78%) for F13. The swelling ratio was 4.2 at the end of the 8 hours for the optimized formula, and the in vitro release rate was controlled for 12 hours. In vivo study verified that there was a 1.61-fold enhancement in SB bioavailability from optimized formula (F13) compared to market tablet.

Conclusion

The study suggested that microspheres prepared from CN/KN crosslinking on an SHS using glutaraldehyde atmosphere is a promising technique that can encapsulate and sustain the release of water-soluble drugs such as SB in addition to improving its in vivo pharmacokinetic profile.

Guar Gum Micro-particles for Targeted Co-delivery of Doxorubicin and Metformin HCL for Improved Specificity and Efficacy Against Colon Cancer: In Vitro and In Vivo Studies

Doxorubicin and Metformin HCL is a known chemotherapeutic combination that wipes out tumors and prevents their recurrence. However, limited site specificity confines its application. Here we report Doxorubicin and Metformin HCL-loaded guar gum micro-particles prepared by emulsification cum-solidification method. Developed micro-particles were characterized as spherical shape particles with smooth surface and micro size diameter. Encapsulation of drugs in combination was confirmed by their characteristic functional groups (FT-IR), change in phase transition temperature (DSC) and X-ray diffraction pattern (XRD). Particles were observed to be stable at 25 and 5°C. The in vitro Doxorubicin and Metformin HCL release study in simulated gastric (SGF), intestinal (SIF) and colonic fluid (SCF) confirms restricted release in SGF (9.3 and 9.6%, respectively, in 2 h) and SIF (10.8 and 14.7%, respectively, in the next 3 h) and highest release in SCF (about 68 and 73.3%, respectively) in colon. Developed micro-particles showed 78% recovery in tumor volume and considerable improvement in histological changes. X-ray images confirmed good target ability of micro-particles to colon. In conclusion, the specially designed, stable micro-particles are able to target drug combination to colon and improve efficacy by ensuring maximum drug release in colon as compared with Doxorubicin and Metformin HCL combination.

Formulation and development of di-dependent microparticulate system for colon-specific drug delivery

Colorectal cancer (CRC) is the third most common cancer globally and the second most common cause of cancer-related deaths. Site-specific delivery of drugs leads to an increase in the availability of drugs at the targeted region. The objective of the present investigation was to develop a dually functional microparticulate colon-targeted drug delivery system of meloxicam for potential application in the prophylaxis of colorectal cancer. Chitosan microspheres were prepared by using emulsification-chemical cross-linking technique. Formulation parameters studied include chitosan concentration, drug to polymer ratio, agitation speed, emulsifier concentration, quantity of cross-linking agent and time for cross-linking. In vitro evaluation of microspheres revealed premature release of drug in the upper part of gastrointestinal tract. Since coating of microspheres is difficult to accomplish (with reproducible results), they were compacted to tablets. Enteric coating of tableted microspheres was achieved using Eudragit® S100. In vitro evaluation and SEM studies depict that the microspheres remain intact during compression process. The developed system was further evaluated for in vivo pharmacokinetic and roentgenography studies. In vivo pharmacokinetic evaluation in rabbits reveal that the onset of drug absorption from the coated tableted microspheres (T _{lag time} = 4.67 ± 0.58 h) was significantly delayed compared to uncoated tableted microspheres. In vivo roentgenographic study revealed that the system remained intact, until it reaches to the colonic region (5 h). Thus, from the results of the study, it can be revealed that the developed system could serve as a potential tool for efficient delivery of drug to the colonic region.

Polysaccharide-based micro/nanocarriers for oral colon-targeted drug delivery

Oral colon-targeted drug delivery has attracted many researchers because of its distinct advantages of increasing the bioavailability of the drug at the target site and reducing the side effects. Polysaccharides that are precisely activated by the physiological environment of the colon hold greater promise for colon targeting. Considerable research efforts have been directed towards developing polysaccharide-based micro/nanocarriers. Types of polysaccharides for colon targeting and in vitro/in vivo assessments of polysaccharide-based carriers for oral colon-targeted drug delivery are summarised. Polysaccharide-based microspheres have gained increased importance not just for the delivery of the drugs for the treatment of local diseases associated with the colon (colon cancer, inflammatory bowel disease (IBD), amoebiasis and irritable bowel syndrome (IBS)), but also for it's potential for the delivery of anti-rheumatoid arthritis and anti-chronic stable angina drugs. Besides, Polysaccharide-based micro/nanocarriers such as microbeads, microcapsules, microparticles, nanoparticles, nanogels and nanospheres are also introduced in this review.

Formulation of gastroresistant tablets containing sodium alendronate-loaded blend microparticles

<p>Sodium alendronate is an antiresorptive drug used for the treatment of postmenopausal osteoporosis. However, its oral administration is associated with low bioavailability and gastroesophageal irritation. This work aimed at developing tablets containing sodium alendronate-loaded microparticles by direct compression to achieve a safe and effective form. The parameters evaluated were average weight, hardness, thickness and drug content. <italic>In vitro</italic> release tests were carried out using simulated gastric and intestinal fluids, and the profiles were analyzed through the Korsmeyer-Peppas mono- or biexponential dependent approaches. Tablets presented adequate average weight, thickness, good mechanical properties and drug content close to 100%. Moreover, the formulation released less than 11% of sodium alendronate in gastric fluid, exhibiting a good gastroresistance. At pH 6.8, almost 100% of the drug was released in 12h, showing a prolonged profile. The mathematical modeling indicated that the experimental data was better fitted to the biexponential equation. Furthermore, a good correlation coefficient was obtained for the Korsmeyer-Peppas model and the release exponent suggested that the drug dissolution was driven by anomalous transport. In conclusion, the microparticulated tablets can be considered a promising alternative for oral delivery of sodium alendronate.</p>

Getting into the colon: approaches to target colorectal cancer

Colorectal cancer (CRC) is the third most common cancer in the world and the second most common cause of cancer related deaths. Conventional treatment of CRC is comprised of drug (chemotherapeutic agents) administration by parenteral route, which delivers the drug to both normal as well as cancerous tissues, thus leading to numerous undesirable effects. Enormous research is going on worldwide for designing an alternative route of administration, among which oral colon-targeted drug delivery systems have gained immense attention amongst scientific community. Direct delivery of drugs at the site of action leads to an increase in the availability of drugs at the targeted region. This causes a reduction in the amount of drug required to exert same therapeutic effect, thus reducing the incidents of adverse effects. Various maneuvers (pH-dependent, time-dependent and microflora-activated systems) have been attempted by researchers for targeting drugs successfully to the colonic region by circumventing the upper part of gastrointestinal tract. This Editorial article aims to put forth an overview of the formulation technologies that have been developed for attaining colon specific drug delivery for the treatment of CRC.

Resistant starch film-coated microparticles for an oral colon-specific polypeptide delivery system and its release behaviors

For the delivery of bioactive components to the colon, an oral colon-specific controlled release system coated with a resistant starch-based film through aqueous dispersion coating process was developed. Starch was modified by a high-temperature-pressure reaction, enzymatic debranching, and retrogradation, resulting in a dramatic increase in the resistibility against enzymatic digestion (meaning the formation of resistant starch, specifically RS3). This increase could be associated with an increase in the relative crystallinity, a greater amount of starch molecular aggregation structure, and the formation of a compact mass fractal structure, resulting from the treatment. The microparticles coated with this RS3 film showed an excellent controlled release property. In streptozotocin (STZ)-induced type II diabetic rats, the RS3 film-coated insulin-loaded microparticles exhibited the ability to steadily decrease the plasma glucose level initially and then maintain the plasma glucose level within the normal range for total 14-22 h with different insulin dosages after oral administration; no glycopenia or glycemic fluctuation was observed. Therefore, the potential of this new RS3 film-coated microparticle system has been demonstrated for the accurate delivery of bioactive polypeptides or protein to the colon.

Tabletted guar gum microspheres of piroxicam for targeted adjuvant therapy for colonic adenocarcinomas

BACKGROUND

In recent years, nonsteroidal anti-inflammatory drugs have been found to be cogent as an adjuvant therapeutic agent in mitigating colorectal cancer. Thus, this present investigation was aimed to formulate an oral, targeted tablet of piroxicam microspheres for sustained and targeted adjuvant therapy for colonic adenocarcinomas.

RESULTS

Crosslinked guar gum microspheres of piroxicam were directly compressed into matrix tablet and coated with Eudragit S100. The optimized tablet that displayed 0% release in simulated gastric fluid, 15% in simulated intestinal fluid and 97.1% in simulated colonic fluid underwent roentgenographic study in rabbits to check its safe transit to the colon. x-ray images revealed intactness of the tablet until it reached the colon where the tablet matrix eroded.

CONCLUSION

The designed, conceptual formulation emerged as potential carrier for targeted adjuvant therapy of piroxicam.