Electro-Fenton degradation of cellulose using graphite/PTFE electrodes modified by 2-ethylanthraquinone

Electrochemical recycling of polymeric materials

Polymeric materials play a pivotal role in our modern world, offering a diverse range of applications. However, they have been designed with end-properties in mind over recyclability, leading to a crisis in their waste management. The recent emergence of electrochemical recycling methodologies for polymeric materials provides new perspectives on closing their life cycle, and to a larger extent, the plastic loop by transforming plastic waste into monomers, building blocks, or new polymers. In this context, we summarize electrochemical strategies developed for the recovery of building blocks, the functionalization of polymer chains as well as paired electrolysis and discuss how they can make an impact on plastic recycling, especially compared to traditional thermochemical approaches. Additionally, we explore potential directions that could revolutionize research in electrochemical plastic recycling, addressing associated challenges.

Carbonaceous cathode materials for electro-Fenton technology: Mechanism, kinetics, recent advances, opportunities and challenges

Electro-Fenton (EF) technique has gained significant attention in recent years owing to its high efficiency and environmental compatibility for the degradation of organic pollutants and contaminants of emerging concern (CECs). The efficiency of an EF reaction relies primarily on the formation of hydrogen peroxide (H₂O₂) via 2e^─ oxygen reduction reaction (ORR) and the generation of hydroxyl radicals (^●OH). This could be achieved through an efficient cathode material which operates over a wide pH range (pH 3-9). Herein, the current progresses on the advancements of carbonaceous cathode materials for EF reactions are comprehensively reviewed. The insights of various materials such as, activated carbon fibres (ACFs), carbon/graphite felt (CF/GF), carbon nanotubes (CNTs), graphene, carbon aerogels (CAs), ordered mesoporous carbon (OMCs), etc. are discussed inclusively. Transition metals and hetero atoms were used as dopants to enhance the efficiency of homogeneous and heterogeneous EF reactions. Iron-functionalized cathodes widened the working pH window (pH 1-9) and limited the energy consumption. The mechanism, reactor configuration, and kinetic models, are explained. Techno economic analysis of the EF reaction revealed that the anode and the raw materials contributed significantly to the overall cost. It is concluded that most reactions follow pseudo-first order kinetics and rotating cathodes provide the best H₂O₂ production efficiency in lab scale. The challenges, future prospects and commercialization of EF reaction for wastewater treatment are also discussed.

Raw biomass electroreforming coupled to green hydrogen generation

Despite the tremendous progress of coupling organic electrooxidation with hydrogen generation in a hybrid electrolysis, electroreforming of raw biomass coupled to green hydrogen generation has not been reported yet due to the rigid polymeric structures of raw biomass. Herein, we electrooxidize the most abundant natural amino biopolymer chitin to acetate with over 90% yield in hybrid electrolysis. The overall energy consumption of electrolysis can be reduced by 15% due to the thermodynamically and kinetically more favorable chitin oxidation over water oxidation. In obvious contrast to small organics as the anodic reactant, the abundance of chitin endows the new oxidation reaction excellent scalability. A solar-driven electroreforming of chitin and chitin-containing shrimp shell waste is coupled to safe green hydrogen production thanks to the liquid anodic product and suppression of oxygen evolution. Our work thus demonstrates a scalable and safe process for resource upcycling and green hydrogen production for a sustainable energy future.

The scale-up of the coupling of water electroreduction (HER) with organic electrooxidation remains challenging. Here the authors address this challenge by coupling HER with electrooxidation of raw biomass chitin, cogenerating acetate and green hydrogen safely at high current density.

Biochar cathode: Reinforcing electro-Fenton pathway against four-electron reduction by controlled carbonization and surface chemistry

Porous biochars have attracted tremendous interests in electrochemical applications. In this study, a family of biochars were prepared from cellulose subject to different carbonization temperatures ranging from 400 to 700 °C, and the biochars were in-situ activated by a molten salt (ZnCl₂) to construct a hierarchically porous architecture. The activated porous biochars (ZnBC) were used as a carbocatalyst for electro-Fenton (EF) oxidation of organic contaminants. Results showed that high-temperature carbonization improved the activity of biochar for four-electron oxygen reduction reaction (ORR) due to the rich carbon defects, while the mild-temperature treatment regulated the species and distribution of oxygen functional groups to increase the production of hydrogen peroxide (H₂O₂) via a selective two-electron ORR pathway. ZnBC-550 was the best cathode material with a high ORR activity without compromise in H₂O₂ selectivity; a high production rate of H₂O₂ (796.1 mg/g/h) was attained at -0.25 V vs RHE at pH of 1. Furthermore, Fe(II) addition induced an electro-Fenton system to attain fast decomposition of various organic pollutants at -0.25 V vs RHE (reversible hydrogen electrode) and pH of 3 with a satisfactory mineralization efficiency toward phenolic pollutants. The EF system maintains its excellent stability for 10 cycles. Hydroxyl radicals were identified as the dominant reactive oxygen species based on in situ electron paramagnetic resonance (EPR) analysis and radical quenching tests. This study gains new insights into electrocatalytic H₂O₂ production over porous biochars and provides a low-cost, robust and high-performance electro-Fenton cathode for wastewater purification.

Recent advances in the electrooxidation of biomass-based organic molecules for energy, chemicals and hydrogen production

The recent developments in biomass-derivative fuelled electrochemical converters for electricity or hydrogen production together with chemical electrosynthesis have been reviewed.

Ultrahigh yield of hydrogen peroxide and effective diclofenac degradation on a graphite felt cathode loaded with CNTs and carbon black: an electro-generation mechanism and a degradation pathway

A new graphite felt cathode loaded with carbon nanotubes and carbon black was developed.

Conversion of cellulose into reducing sugar by solution plasma process (SPP)

In the present study, cellulose colloids are treated with the solution plasma process in order to prepare reducing sugar. The investigated parameters are treatment time, type of electrodes, and applied pulse frequency of the bipolar supply. The reducing sugar was characterized by DNS method and the%yield of total reducing sugar (TRS) was then calculated. The crystal structure and chemical structure of plasma-treated cellulose was measured by XRD and FT-IR, respectively. The%yield of TRS was greatly enhanced by solution plasma treatment using Fe electrode. SEM and TEM micrograph indicated that Fe electrode yield the incidental Fe nanoparticles, hypothesized to catalyze the cellulose degradation during SPP treatment. The crystal structure of cellulose was destroyed. Solution plasma treatment of cellulose using Fe electrode at the high applied frequency pulse provided the highest%TRS.

Sulfonic acid-grafted polyvinylidene fluoride electrospun mats as electro-Fenton reactor membrane components

Illustration of reaction mechanism of the EF process.

Solvent-free synthesis of the cellulose-based hybrid beads for adsorption of lead ions in aqueous solutions

Modified cellulose hybrid beads were synthesised as absorbents for Pb²⁺removal and CaCO₃was utilized to increase pore structure.