Characterization of cellulose acetate-reinforced aliphatic–aromatic copolyester composites

Biodegradation of PHB/PBAT films and isolation of novel PBAT biodegraders from soil microbiomes

Polyhydroxyalkanoates (PHAs) are important candidates for replacing petroleum-based plastics. This transition is urgent for the development of a biobased economy and to protect human health and natural ecosystems. PHAs are biobased and biodegradable polyesters that when blended with other polymers, such as poly(butylene adipate-co-terephthalate) (PBAT), acquire remarkable improvements in their properties, which allow them to comply with the requirements of packaging applications. However, the biodegradation of such blends should be tested to evaluate the impact of those polymers in the environment. For instance, PBAT is a compostable aliphatic-aromatic copolyester, and its biodegradation in natural environments, such as soil, is poorly studied. In this work, we evaluated the biodegradation of a bilayer film composed of PHB and PBAT, by a soil microbiome. The bilayer film reached 47 ± 1 % mineralization in 180 days and PHB was no longer detected after this period. The increased crystallinity of the PBAT residue was a clear sign of biodegradation, indicating that the amorphous regions were preferentially biodegraded. Seven microorganisms were isolated, from which 4 were closely related to microorganisms already known as PHB degraders, but the other 3 species, closely related to Streptomyces coelicoflavus, Clonostachys rosea and Aspergillus insuetus, were found for the first time as PHB degraders. Most remarkably, two fungi closely related to Purpureocillium lilacinum and Aspergillus pseudodeflectus (99.83 % and 100 % identity by ITS sequencing) were isolated and identified as PBAT degraders. This is very interesting due to the rarity of isolating PBAT-degrading microorganisms. These results show that the bilayer film can be biodegraded in soil, at mesophilic temperatures, showing its potential to replace synthetic plastics in food packaging.

The impact of esterified nanofibrillated cellulose content on the properties of thermoplastic starch/PBAT biocomposite films through ball-milling

To enhance the mechanical properties and interfacial compatibility of thermoplastic starch (TPS) highly filled poly(butylene adipate co-terephthalate) (PBAT) composite films, esterified NFC was innovatively fabricated and introduced into the composite system. The influences of NFC content and ball-milling treatment were thoroughly investigated. Interestingly, the amphiphilic esterified NFC provided a "bridge-like" effect between TPS and PBAT interfaces, which significantly improved the interfacial compatibility and mechanical properties. Notably, the tensile properties of the composite films reached their maximums at a 7 wt% NFC content, displaying a tensile strength of 6.2 MPa and an elastic modulus of 263 MPa. These values corresponded to a 59 % and 180 % increase, respectively, compared to the composition without NFC. More importantly, ball-milling contributed to uniform dispersion and surface activation of NFC, preventing starch retrogradation, and enhancing the tensile strength and elastic modulus by 30.3 % and 56.6 %, respectively. Additionally, the film exhibited excellent UV-blocking, foldable, writable, and transparent performance. These findings provide valuable data supporting the expanded applications of starch-based composite films.

Idiosyncratic cellulose acetate nanocomposite membranes: synthesis and performance control study for desalination

In order to enhance the characteristic performance of cellulose acetate (CA) membranes, a novel nanofiller synergy is adopted herein for desalination purpose. Activated zinc oxide and aero-silica synergy in seven different ratio based combinations were introduced into CA matrix adopting solution mixing technique. The functionalized nanofillers loading impact on membranes surface texture, crystalline structural difference, functional groups presence, thermal decomposition and phase transition temperatures were scrutinized. The sole membranes were practically employed to determine salts (NaCl and MgCl₂) rejection tested by dead-end filtration system. Time dependent flux rate and fouling study were performed to decide the reuseability of nanocomposite membranes. The results validate a remarkable improvement by idiosyncratically synthesized nanocomposite membranes.

Renewable polyesters derived from 10-undecenoic acid and vanillic acid with versatile properties

A series of renewable polyesters were synthesized derived from 10-undecenoic acid and vanillic acid. An outstanding feature is that the incorporation of vanillic acid segments into the polyester backbone results in improved mechanical properties.

Development of functionalized cellulosic biopolymers by graft copolymerization

Natural lignocellulosic polymers are one of the most promising biodegradable, non-toxic and eco-friendly polymeric materials which have been used to develop various products for number of applications especially in green composites. However, these cellulosic materials have certain drawbacks, like sensitivity to water and moisture, and need to be modified. So in this article, a treatment of lignocellulose biopolymers with suitable acrylate monomer was investigated. The influence of different reaction parameters on efficiency (grafting) was investigated. SEM, TGA and Fourier transform infrared spectroscopy (FT-IR) were used to study the graft copolymerization between the monomer and hydroxyl groups of lignocellulosic biopolymers. This article also discusses swelling, and chemical resistance properties of the both the grafted/ungrafted cellulosic biopolymer and their potential candidature for green composite applications.

Rapid synthesis of graft copolymers from natural cellulose fibers

Cellulose is the most abundant natural polysaccharide polymer, which is used as such or its derivatives in a number of advanced applications, such as in paper, packaging, biosorption, and biomedical. In present communication, in an effort to develop a proficient way to rapidly synthesize poly(methyl acrylate)-graft-cellulose (PMA-g-cellulose) copolymers, rapid graft copolymerization synthesis was carried out under microwave conditions using ferrous ammonium sulfate-potassium per sulfate (FAS-KPS) as redox initiator. Different reaction parameters such as microwave radiation power, ratio of monomer, solvent and initiator concentrations were optimized to get the highest percentage of grafting. Grafting percentage was found to increase with increase in microwave power up to 70%, and maximum 36.73% grafting was obtained after optimization of all parameters. Fourier transforms infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA/DTA/DTG) analysis were used to confirm the graft copolymerization of poly(methyl acrylate) (PMA) onto the mercerized cellulose. The grafted cellulosic polymers were subsequently subjected to the evaluation of different physico-chemical properties in order to access their application in everyday life, in a direction toward green environment. The grafted copolymers demonstrated increased chemical resistance, and higher thermal stability.