Effect of extraction time and temperature on the characteristics of loosely bound pectins from Japanese plum

Polysaccharides in fruits: Biological activities, structures, and structure-activity relationships and influencing factors-A review

Fruits are a rich source of polysaccharides, and an increasing number of studies have shown that polysaccharides from fruits have a wide range of biological functions. Here, we thoroughly review recent advances in the study of the bioactivities, structures, and structure-activity relationships of fruit polysaccharides, especially highlighting the structure-activity influencing factors such as extraction methods and chemical modifications. Different extraction methods cause differences in the primary structures of polysaccharides, which in turn lead to different polysaccharide biological activities. Differences in the degree of modification, molecular weight, substitution position, and chain conformation caused by chemical modification can all affect the biological activities of fruit polysaccharides. Furthermore, we summarize the applications of fruit polysaccharides in the fields of pharmacy and medicine, foods, cosmetics, and materials. The challenges and perspectives for fruit polysaccharide research are also discussed.

Extraction, structure and bioactivities of polysaccharide from root of Arctium lappa L.: A review

Arctium lappa L. root is a well-known Chinese medicine with high medicinal and food values. Arctium lappa L. root polysaccharide (ALP), as the main component and bioactive substance, has a variety of biological activities, including anti-inflammatory, antioxidant, hypoglycemic, hypolipidemic, antithrombotic, immunomodulatory activity and improvement of intestinal flora. The biological activities of polysaccharides are closely related to their structures, and different extraction and purification methods will yield different polysaccharide structures. As a kind of natural polysaccharide, ALP has a broad application prospect in drug carrier. In this paper, we reviewed the research progress on the extraction, purification, structural characterization, biological activities, structure-activity relationship and drug carrier application of ALP, in order to provide basic reference for the development and application of medical and health care value. At the same time, the shortcomings of ALP research are discussed in depth, and the potential development prospect and future research direction are prospected.

Pectin extracted from Premna Microphylla Turcz for preparation of a "sandwich" multi-property sensor film involved with deep eutectic solvent

An acidic deep eutectic solvent (DES, choline chloride/citric acid) was used to efficiently extract edible pectin from Premna microphylla Turcz (PMTP) and further prepare the film sensor with the purpose of "four birds with one stone" with the roles of extractant, coalescent, conductivity promoter and bacteriostatic agent. The optimized extraction process accorded with pseudo second-order kinetics, which was carried out at 78.2 °C for 1.29 h with the solid-liquid ratio of 1:34.66 g/mL with the yield up to 0.8210 g/g. After comprehensive characterizations of pectin product, a simple casting method was used to prepare the PMTP-DES based composite film. It showed that the composite film has promising compatibility, smooth surface, good breathability and ideal homogeneity. After 30 power on/power off cycles at 10 V, it exhibited satisfied conductivity stability. Moreover, the PMTP-DES film could be simply assembled as the flexible visual temperature sensor, with sensitive response at breathing or finger touch; it exhibited the highest sensitivity of 134 %/°C when the external temperature changed from 15 to 55 °C. Besides, the composite film also has preferable antimicrobial activity. The whole results and findings were aimed to contribute for the raw material, composition, preparation, and functions of the existing flexible functional materials.

Recent progress in pectin extraction, characterization, and pectin-based films for active food packaging applications: A review

Pectin is an abundant complex polysaccharide obtained from various plants. Safe, biodegradable, and edible pectin has been extensively utilized in the food industry as a gelling agent, thickener, and colloid stabilizer. Pectin can be extracted in a variety of ways, thus affecting its structure and properties. Pectin's excellent physicochemical properties make it suitable for many applications, including food packaging. Recently, pectin has been spotlighted as a promising biomaterial for manufacturing bio-based sustainable packaging films and coatings. Functional pectin-based composite films and coatings are useful for active food packaging applications. This review discusses pectin and its use in active food packaging applications. First, basic information and characteristics of pectin, such as the source, extraction method, and structural characteristics, were described. Then, various methods of pectin modification were discussed, and the following section briefly described pectin's physicochemical properties and applications in the food sector. Finally, the recent development of pectin-based food packaging films and coatings and their use in food packaging were comprehensively discussed.

The Complex Biological Effects of Pectin: Galectin-3 Targeting as Potential Human Health Improvement?

Galectin-3 is the only chimeric representative of the galectin family. Although galectin-3 has ubiquitous regulatory and physiological effects, there is a great number of pathological environments where galectin-3 cooperatively participates. Pectin is composed of different chemical structures, such as homogalacturonans, rhamnogalacturonans, and side chains. The study of pectin's major structural aspects is fundamental to predicting the impact of pectin on human health, especially regarding distinct molecular modulation. One of the explored pectin's biological activities is the possible galectin-3 protein regulation. The present review focuses on revealing the structure/function relationship of pectins, their fragments, and their biological effects. The discussion highlighted by this review shows different effects described within in vitro and in vivo experimental models, with interesting and sometimes contradictory results, especially regarding galectin-3 interaction. The review demonstrates that pectins are promissory food-derived molecules for different bioactive functions. However, galectin-3 inhibition by pectin had been stated in literature before, although it is not a fully understood, experimentally convincing, and commonly agreed issue. It is demonstrated that more studies focusing on structural analysis and its relation to the observed beneficial effects, as well as substantial propositions of cause and effect alongside robust data, are needed for different pectin molecules' interactions with galectin-3.

The Structure and Composition of Extracted Pectin and Residual Cell Wall Material from Processing Tomato: The Role of a Stepwise Approach versus High-Pressure Homogenization-Facilitated Acid Extraction

In literature, different pectin extraction methods exist. In this study, two approaches starting from the alcohol-insoluble residue (AIR) of processing tomato are performed in a parallel way to facilitate the comparison of pectin yield and the compositional and structural properties of the extracted pectin and residual cell wall material obtained. On the one hand, pectin is extracted stepwise using hot water, chelating agents and low-alkaline conditions targeting fractionation of the pectin population. On the other hand, an industrially relevant single-step nitric acid pectin extraction (pH 1.6) is performed. In addition to these conventional solvent pectin extractions, the role of high-pressure homogenization (HPH) as a physically disruptive treatment to facilitate further pectin extraction from the partially pectin-depleted fraction obtained after acid extraction is addressed. The impact of HPH on the pectin cell wall polysaccharide interactions was shown as almost two thirds of the residual pectin were extractable during the subsequent extractions. For both extraction approaches, pectin obtained further in the sequence was characterized by a higher molecular mass and a higher amount of rhamnogalacturonan I domains. The estimated hemicellulose and cellulose content increased from 56 mol% for the AIR to almost 90 mol% for the final unextractable fractions of both methods.

The purification of pectin from commercial fruit flours results in a jaboticaba fraction that inhibits galectin-3 and colon cancer cell growth

Fruits are a prime source of nutrients, bioactive compounds, and dietary fibers. Some products available on the Brazilian market use fruit by-products and claim to have useful effects on human health due to their dietary fiber content. The study aimed to extract and purify the total (28-47 w/w yield) and soluble dietary fiber (4-7 w/w yield) from jaboticaba, papaya, and plum commercial flours sold in Brazil and to study the in vitro biological effects of the fractions. The purified water-soluble fractions consisted mainly of pectin-derived oligosaccharides (5-15 KDa molecular weight) with a negligible content of polyphenols, protein, ashes, and starch. Jaboticaba sample was 95% galacturonic acid while plum and papaya samples were 40% galacturonic acid and 40% galactose (mol%), approximately. The samples were tested for recombinant human galectin-3 inhibition and changes in the cell viability of human colorectal cancer cells. Only the jaboticaba sample inhibited galectin-3 and decreased HCT116 cell viability after 48 h of treatment (p ≤ 0.01) while the plum sample decreased the cell viability after 24 h treatment (p ≤ 0.05). The results obtained in this study demonstrate the relationship between the structure of the soluble fibers extracted from jaboticaba flour and the possible beneficial effects of their consumption.

Influence of drying process and particle size of persimmon fibre on its physicochemical, antioxidant, hydration and emulsifying properties

Persimmon, given its current surplus production, could be an alternative source for the extraction of certain interesting ingredients for the food industry and human health, such as fibre. Thus, the aim of this study was to analyse the influence of hot air and freeze-drying, as well as the particle size of fibre extracted from persimmon peels or pulp on their physicochemical, antioxidant, hydration and emulsifying properties, compared to commercial fibres (from peach, lemon, orange and apple). The results showed that both freeze-dried persimmon pulp and freeze-dried peel had better hydration properties and oil holding capacity than other fibres analysed, although the swelling capacity was higher for lemon fibre. Freeze-dried persimmon peel fibre showed higher values of emulsion stability than commercial fibres. Finally, the antioxidant activity of the smallest sized persimmon peel fibre obtained by freeze-drying was higher than that for lemon, orange and peach fibre.

Pectin from carrot pomace: Optimization of extraction and physicochemical properties

In this study, the central composite design for four variables in five levels was applied to determine the effects of pH (0.5-2.5), temperature (50-90°C), heating time (30-150min) and liquid/solid ratio (10-50v/w) on the yield and degree of esterification (DE) of carrot pomace pectin. The results showed that the pectin yield ranged from 5.0 to 15.2% and also, this pectin is classified as low methoxyl pectin (DE of 22.1-51.8%). The pH of 1.3, temperature of 90°C, time of 79.8min and liquid/solid ratio of 23.3v/w were determined as optimal conditions with a maximum yield of 15.6±0.5%, which was close to the predicted values (16.0%). Under the optimal extraction conditions, the galacturonic acid content and emulsifying activity were 75.5 and 60.3% respectively; moreover, the emulsions had a high stability at two different storage temperatures (4 and 23°C). Furthermore, carrot pectin solutions exhibited viscous and pseudoplastic behavior at 1% w/v.

Aqueous extraction of pectin from sour orange peel and its preliminary physicochemical properties

Sour orange peel, a by-product of the fruit juice industry, was used as a source of pectin. The effects of temperature (75-95°C), time (30-90 min), and liquid-solid ratio (20-40, v/w) were investigated on yield, methoxylation degree (DE), and galacturonic acid content using a Box-Behnken design and response surface methodology. The highest extraction yield (17.95 ± 0.3%) was obtained at temperature of 95°C, time of 90 min, and liquid-solid ratio of 25 (v/w). The DE values for the pectin ranged from 17% to 30.5%, indicating that the pectin was low in methoxyle. The emulsifying activity of pectin extracted under optimal conditions was 45%. The emulsions were 86.6% stable at 4°C and 71.4% at 23°C after 30 days of storage. The pectin exhibited Newtonian flow at low concentrations (≤ 1.0%, w/v); as the concentration increased, pseudoplastic flow became dominant.

Chemical and functional properties of cell wall polymers from two cherry varieties at two developmental stages

The cell wall polysaccharides of Regina and Sunburst cherry varieties at two developmental stages were extracted sequentially, and their changes in monosaccharide composition and functional properties were studied. The loosely-attached pectins presented a lower d-galacturonic acid/rhamnose ratio than ionically-bound pectins, as well as lower thickening effects of their respective 2% aqueous solution: the lowest Newtonian viscosity and shear rate dependence during the pseudoplastic phase. The main constituents of the cell wall matrix were covalently bound pectins (probably through diferulate cross-linkings), with long arabinan side chains at the RG-I cores. This pectin domain was also anchored into the XG-cellulose elastic network. Ripening occurred with a decrease in the proportion of HGs, water extractable GGM and xylogalacturonan, and with a concomitant increase in neutral sugars. Ripening was also associated with higher viscosities and thickening effects, and to larger distribution of molecular weights. The highest firmness and compactness of Regina cherry may be associated with its higher proportion of calcium-bound HGs localized in the middle lamellae of cell walls, as well as to some higher molar proportion of NS (Rha and Ara) in covalently bound pectins. These pectins showed significantly better hydration properties than hemicellulose and cellulose network. Chemical composition and functional properties of cell wall polymers were dependent on cherry variety and ripening stage, and helped explain the contrasting firmness of Regina and Sunburst varieties.