Preparation of pH- and ionic-strength responsive biodegradable fumaric acid crosslinked carboxymethyl cellulose

The effect of sulfonated reduced graphene oxide on the properties of ionic strength sensitive PEC film comprising protein/polysaccharides combined system

In the current study, sulfonated reduced graphene oxide (SRGO) at different amounts (0.0 %, 0.015 %, 0.030 %, 0.050 % w/v) was incorporated into the polyelectrolyte complex (PEC) which was produced by using protein/polysaccharides combined system composed of gelatin (Gel)/carboxymethyl cellulose (CMC) and hyaluronic acid (HA) not only to enhance mechanical and conductive properties but also to investigate the effect of sulfonyl groups on the ionic strength response of the produced PEC films. While FT-IR, SEM and zeta potential analyses were confirmed the character of produced samples, their mechanical and conductivity tests showed that the introduction of SRGO enhanced both mechanical performance and conductive feature of PEC films. Swelling and 5- fluorouracil (5-FU), a chemotherapeutic agent, release tests carried out in the solution with a varying ionic strength at a pH: 1.2 to simulate acidic stomach environment demonstrated that while pure PEC film has anti-polyelectrolyte behavior, SRGO based PEC films exhibited polyelectrolyte character due to sulfonyl groups with an increasing ionic strength of medium. It could be emphasized from all these results that the produced SRGO based PEC films with enhanced mechanical and conductive properties could be utilized as an ionic strength sensitive drug carrier which ensures controlled and targeted release for cancer treatments.

Synthesis of Multivalent Glycoside-Immobilized Carboxymethyl Cellulose Nanohydrogel Particles with Superadsorption Ability for Lectins

Carboxymethyl cellulose (CMC) is a water-soluble cellulose derivative that is nontoxic, biocompatible, biodegradable, and nonallergenic. As developing an adsorbent material for carbohydrate-binding proteins is challenging, we aimed to synthesize CMC nanohydrogel particles (CMCGPs) with an extremely high lectin adsorption tendency in this study. CMCGPs were used as the backbone of an adsorption carrier that was synthesized by cross-linking CMC with ethylene glycol diglycidyl ether. A series of glycoside-immobilized CMCGPs were synthesized by binding two types of glycans (LacNAc and lactose) to the polyvalent carboxymethyl groups that are present on the CMCGP surface and act as reaction sites. These immobilized glycosides function as molecular recognition sites. Glycan moieties were incorporated into the CMCGP backbone at degrees of immobilization (DI) ranging from 8.7 to 21.0% by altering the reaction composition. LacNAc-CMCGP (3b) showed a 19.9% DI of LacNAc glycoside to the CMCGP carboxymethyl group; on average, its particle size swelled to 418 nm in phosphate-buffered saline, which is approximately 1.4 times its dry-state size. Analyzing the adsorbent properties of glyco-CMCGPs using a lectin-binding assay showed the high structural specificity of glyco-CMCGPs to lectins. The equilibrium isotherm data was explained by the Langmuir adsorption model. Notably, compound 3b adsorbed 1.95 ± 0.05 μg of wheat germ agglutinin (WGA) lectin per 1.0 μg-dry of 3b particles at an adsorption equilibrium time of a few minutes. Furthermore, solid-state 13C nuclear magnetic resonance analysis showed that WGA lectin retained its natural structure without denaturation after binding to LacNAc-CMCGP. These results were also supported by affinity purification experiments of WGA from raw wheat germ extract using LacNAc-CMCGP, demonstrating that glyco-CMCGP is capable of adsorbing and desorbing lectin while maintaining its biological activity. Thus, multivalent glycoside-immobilized CMCGPs that use woody biomass derivatives as the backbone are expected to be applied as biorefinery materials, which specifically and abundantly adsorb not just plant lectins but also pathogenic viruses and toxin proteins.

Intelligent and biocompatible cellulose aerogels featured with high-elastic and fast-hemostatic for epistaxis and wound healing

Nasal tamponade is a commonly employed and highly effective treatment method for preventing nasal bleeding. However, the current nasal packing hemostatic materials exhibit some limitations, such as low hemostatic efficiency, the potential for causing secondary injury when removed from the nasal cavity, limited intelligence in their design, and an inability to promote the healing of nasal mucosa wounds. Herein, we report the fabrication of a smart cellulose aerogel through the covalent cross-linking of carboxymethyl cellulose (CMC) macromolecules, while incorporating one-dimensional cellulose nanofibers (CNF) and two-dimensional MXene as reinforcing network scaffolds and conductive fillers. The abundant hydrogen and ether bonds in aerogels make them possess high elasticity in both dry and wet states, which can be compressed 100 times at 90 % deformation with a stress loss of <10 % under water. The highly elastic aerogels can be filled into the narrow nasal passages, pressuring the capillaries and reducing the amount of bleeding. Moreover, the strong interface between aerogels and blood can promote red blood cell aggregation, platelet adhesion and activation, activate intrinsic coagulation pathway and accelerate blood coagulation, resulting in excellent hemostatic ability. Furthermore, the aerogels exhibit excellent hemocompatibility and cytocompatibility, making them suitable for wound healing and capable of fully healing wounds within 15 days. Notably, the presence of MXene causes the aerogels to form a conductive network when exposed to blood, enabling them to perform real-time hemostatic monitoring without removing the dressing. This innovative biomedical aerogel, prepared from natural materials, shows excellent potential for applications in rapid nasal hemostasis.

A sodium carboxymethyl cellulose-induced emission and gelation system for time-dependent information encryption and anti-counterfeiting

Many lanthanide complexes do not form gel or even exhibit characteristic luminescence of lanthanide ions, which limits their applications in many fields. Therefore, there is an urgent need for a third component that can not only promote emission but also gel the lanthanide complex system to construct new smart materials such as time-dependent information encryption and anti-counterfeiting materials. Herein, a luminescent lanthanide metallogel was successfully prepared by using the third component sodium carboxymethyl cellulose (NaCMC) to induce the gelation and luminescence of the complex (H3L/Tb3+) of 4,4',4″-((benzene-1,3,5-tricarbonyl)tris(azanediyl)) tris(2-hydroxybenzoic acid) (H3L) and Tb3+. The H3L/Tb3+ complex itself does not form gel and has no characteristic luminescence of Tb3+. Moreover, the multicolor emission of H3L/Tb3+/NaCMC gels was prepared based on Förster resonance energy transfer (FRET) platforms to obtain a high-security level information encryption and anti-counterfeiting materials. These multicolor emission gels exhibit emission color tunability with time dependence due to the different energy transfer efficiencies at each pH node controlled by glucono-δ-lactone hydrolysis time. Based on the time response characteristics, the time-dependent information encryption and anti-counterfeiting materials are developed.

Biosafety consideration of nanocellulose in biomedical applications: A review

Nanocellulose-based biomaterials have gained significant attention in various fields, especially in medical and pharmaceutical areas, due to their unique properties, including non-toxicity, high specific surface area, biodegradability, biocompatibility, and abundant feasible and sophisticated strategies for functional modification. The biosafety of nanocellulose itself is a prerequisite to ensure the safe and effective application of biomaterials as they interact with living cells, tissues, and organs at the nanoscale. Potential residual endogenous impurities and exogenous contaminants could lead to the failure of the intended functionalities or even serious health complications if they are not adequately removed and assessed before use. This review summarizes the sources of impurities in nanocellulose that may pose potential hazards to their biosafety, including endogenous impurities that co-exist in the cellulosic raw materials themselves and exogenous contaminants caused by external exposure. Strategies to reduce or completely remove these impurities are outlined and classified as chemical, physical, biological, and combined methods. Additionally, key points that require careful consideration in the interpretation of the biosafety evaluation outcomes were discussed to ensure the safety and effectiveness of the nanocellulose-based biomaterials in medical applications.

Preparation and characterization of photosensitive methacrylate-grafted sodium carboxymethyl cellulose as an injectable material to fabricate hydrogels for biomedical applications

Injectable materials have attracted great attention in the manufacture of in situ forming hydrogels for biomedical applications. In this study, a facile method to prepare methacrylic anhydride (MA)-modified sodium carboxymethyl cellulose (CMC) as an injectable material for the fabrication of hydrogels with controllable properties is reported. The chemical structure of the series of MA-grafted CMC (CMCMAs) with different MA contents was confirmed by Fourier transform infrared and nuclear magnetic resonance spectroscopy, and the properties of CMCMAs were characterized. Then, the CMCMAs gel (CMCMAs-G) was fabricated by crosslinking of MA under blue light irradiation. The gelation performances, swelling behaviors, transmittance, surface porous structures and mechanical properties of CMCMAs-G can be controlled by varying the content of MA grafted on the CMC. The compressive strength of CMCMAs-G was measured by mechanical compressibility tests and up to 180 kPa. Furthermore, the in vitro cytocompatibility evaluation results suggest that the obtained CMCMAs-G exhibit good compatibility for cell proliferation. Hence, our strategy provides a facile approach for the preparation of light-sensitive and an injectable CMC-derived polymer to fabricate hydrogels for biomedical applications.

Progress on green crosslinking of polysaccharide hydrogels for drug delivery and tissue engineering applications

Natural polysaccharides are being studied for their biocompatibility, biodegradability, low toxicity, and low cost in the fabrication of various hydrogel devices. However, due to their insufficient physicochemical and mechanical qualities, polysaccharide hydrogels alone are not acceptable for biological applications. Various synthetic crosslinkers have been tested to overcome the drawbacks of standalone polysaccharide hydrogels; however, the presence of toxic residual crosslinkers, the generation of toxic by-products following biodegradation, and the requirement of toxic organic solvents for processing pose challenges in achieving the desired non-toxic biomaterials. Natural crosslinkers such as citric acid, tannic acid, vanillin, gallic acid, ferulic acid, proanthocyanidins, phytic acid, squaric acid, and epigallocatechin have been used to generate polysaccharide-based hydrogels in recent years. Various polysaccharides, including cellulose, alginate, pectin, hyaluronic acid, and chitosan, have been hydrogelized and investigated for their potential in drug delivery and tissue engineering applications using natural crosslinkers. We attempted to provide an overview of the synthesis of polysaccharide-based hydrogel systems (films, complex nanoparticles, microspheres, and porous scaffolds) based on green crosslinkers, as well as a description of the mechanism of crosslinking and properties with a special emphasis on drug delivery, and tissue engineering applications.

Synthesis and characterization of gellan gum-based hydrogels for drug delivery applications

In this study, gellan gum (Gel) derivatives were allowed to interact via aqueous Diels-Alder chemistry without the need for initiators, producing a crosslinked hydrogel network that exhibited good potential as a drug carrier using tramadol as a drug model. Hydrogel conjugation was achieved by the synthesis of a maleimide and furan-functionalized Gel, and the pre- and post-gelation chemical structure of the resulting hydrogel precursors was fully investigated. Potential uses of the developed hydrogel in the pharmaceutical industry were also evaluated by looking at its gelation duration, temperature, morphologies, swelling, biodegradation, and mechanical characteristics. The Gel-FM hydrogels were safe, showed good antimicrobial activity, and had a low storage modulus, which meant that they could be used in many biochemical fields. The encapsulation and release of tramadol from the hydrogel system in phosphate-buffered saline (PBS) at 37 °C were investigated under acidic and slightly alkaline conditions, replicating the stomach and intestinal tracts, respectively. The in-vitro release profile showed promising results for drug encapsulation, revealing that the drug could safely be well-encapsulated in acidic stomach environments and released more quickly in slightly alkaline intestinal environments. This implies that the hydrogels produced could work well as polymers for specifically delivering medication to the colon.

Thermal, morphology and bacterial analysis of pH-responsive sodium carboxyl methylcellulose/ fumaric acid/ acrylamide nanocomposite hydrogels: Synthesis and characterization

In this present investigation, sodium carboxymethyl cellulose grafted with Fumaric acid/Acrylamide (CMC/FA/AAm=CFA) hydrogel and their silver nanocomposite hydrogels (CFA-Ag x, x = 5, 10 and 20) were developed by simple, cost effective and ecofriendly greener method. Mint leaf extract was used as an efficient natural reducing agent due to presence of active and antioxidant potential of polyphenol and flavonoid components. Swelling equilibrium of CFA hydrogel showed Seq% 3000 both in pH medium and distilled water. CFA (90:10) hydrogel has been produced greater than Seq% 6000. The synthesized CFA (90:10)-Ag-5, CFA (90:10)-Ag-10 and CFA (90:10)-Ag-20 nanocomposite hydrogels have been observed lower Seq% 2000-3000 than the CFA hydrogel. The homogeneous distribution of AgNPs throughout the CFA hydrogel and nanocomposites has been explored by SEM analysis. The interaction of network heteroatoms with AgNPs has been strongly revealed by the FTIR spectra and XRD analysis. The thermal stability of CFA (90:10)-Ag-5, 10, and 20 nanocomposite hydrogels have showed greater stability than CFA hydrogel which is confirmed by TGA/DSC thermogram analysis. The TEM analysis was used to explore a uniform distribution of spherical AgNPs (10 nm-50 nm) embedded on the CFA composite hydrogel. The CFA (90:10)-Ag-20 nanocomposite hydrogel has showed good antibacterial activity beside E. coli (Gram positive) and S. aureus (Gram negative) pathogens. Based on the antibacterial activity and swelling properties of CFA-Ag nanocomposite hydrogels have the ability to accelerate the antibacterial activity and are potential candidates for medical and environmental applications.

Reswellable alginate/activated carbon/carboxymethyl cellulose hydrogel beads for ibuprofen adsorption from aqueous solutions

In this study, alginate (Alg) composite beads were prepared by blending with activated carbon (AC) to enhance adsorption capacity for ibuprofen and carboxymethyl cellulose (CMC) to create a reswellable hydrogel. The dried Alg/AC/CMC composite beads could be recovered to sizes and morphologies similar to the initial hydrogel states via a simple reswelling process; however, the dried Alg/AC composite beads without CMC could not be recovered to the initial hydrogel state. Following the reswelling process, the dried Alg/AC/CMC beads demonstrated an 86 % recovery (qe = 34.0 mg/g) in the adsorption capacity for ibuprofen compared to the initial hydrogel beads (qe = 39.6). In contrast, the reswelled Alg/AC beads exhibited only 18 % (qe = 8.6) of the initial adsorption capacity (qe = 48.1). We elucidated the effects of the substitution degree of CMC, AC content, and solution pH on the reswelling property and ibuprofen adsorption capacity of the Alg/AC/CMC composite beads. The adsorption kinetics and isotherms of the prepared composite beads in the hydrogel and reswelled states fit the pseudo-second-order and Langmuir models, respectively. Furthermore, the reswelled Alg composite beads exhibited high adsorption capacity (>93 %) after 10 cycles. Taken together, our findings indicate that the Alg/AC/CMC composite beads can be used as adsorbents without a considerable decrease in adsorption performance by reswelling the beads with distilled water after long-term storage in a dry state.

A Comprehensive Review of Polysaccharide-Based Hydrogels as Promising Biomaterials

Polysaccharides have emerged as a promising material for hydrogel preparation due to their biocompatibility, biodegradability, and low cost. This review focuses on polysaccharide-based hydrogels' synthesis, characterization, and applications. The various synthetic methods used to prepare polysaccharide-based hydrogels are discussed. The characterization techniques are also highlighted to evaluate the physical and chemical properties of polysaccharide-based hydrogels. Finally, the applications of SAPs in various fields are discussed, along with their potential benefits and limitations. Due to environmental concerns, this review shows a growing interest in developing bio-sourced hydrogels made from natural materials such as polysaccharides. SAPs have many beneficial properties, including good mechanical and morphological properties, thermal stability, biocompatibility, biodegradability, non-toxicity, abundance, economic viability, and good swelling ability. However, some challenges remain to be overcome, such as limiting the formulation complexity of some SAPs and establishing a general protocol for calculating their water absorption and retention capacity. Furthermore, the development of SAPs requires a multidisciplinary approach and research should focus on improving their synthesis, modification, and characterization as well as exploring their potential applications. Biocompatibility, biodegradation, and the regulatory approval pathway of SAPs should be carefully evaluated to ensure their safety and efficacy.

Blends of nitrophenylmaleimide isomers with carboxymethylcellulose for the preparation of supramolecular polymers

Novel water-compatible supramolecular polymers (WCSP) based on the non-covalent interaction between carboxymethylcellulose (CMC) and o, m, and p-nitrophenylmaleimide isomers are proposed. The non-covalent supramolecular polymer was obtained from high viscosity CMC with a degree of substitution 1.03 with o, m, and p-nitrophenylmaleimide molecules that were synthesized from maleic anhydride and its corresponding nitroaniline. Subsequently, blends were made at different nitrophenylmaleimide concentrations, stirring rate, and temperatures, with 1.5% CMC, to select the best conditions for each case and to evaluate the rheological properties. The selected blends were used to form films and analyze spectroscopic, physicochemical, and biological properties. Then, the interaction between a CMC monomer and each isomer of nitrophenylmaleimide was investigated using quantum chemistry computational calculations with the B3LYP/6-311 + G (d,p) method, providing a detailed explanation of their intermolecular interactions. The supramolecular polymers obtained exhibit an increase in viscosity of blends between 20% and 30% compared to CMC, a shift in the wavenumber of the OH infrared band by approximately 66 cm^-1, and the first decomposition peak at the glass transition temperature occurring between 70 and 110 °C. These changes in properties are attributed to the formation of hydrogen bonds between the species. However, the degree of substitution and the viscosity of the CMC affects the physical, chemical, and biological properties of the polymer obtained. The supramolecular polymers are biodegradable regardless of the type of blends made and are easily obtainable. Notably, the CMC with m-nitrophenylmaleimide yields the polymer with the best properties.

The influence of molecular weight of cellulose on the properties of carboxylic acid crosslinked cellulose hydrogels for biomedical and environmental applications

Hydrogels a three-dimensional network structure of hydrophilic polymers have gained significant interest in the field of biomedicine due to its high-water absorption properties and its resemblance to native extracellular matrix. However, the hydrogel's physicochemical properties are important in its ability to serve as a matrix in biomedical applications. The variations on the molecular weight of polymers on the preparation of crosslinked hydrogels may alter the properties. Different molecular weight carboxymethyl cellulose polymers were employed in this work to determine the effect of molecular weight on the physicochemical parameters of the hydrogel's crosslinking reaction. For this study, two distinct molecular weight carboxymethyl cellulose (CMC) polymers (M_w, 250,000 and 700,000) and various concentrations of crosslinker solution were used. The hydrogels were prepared through a chemical crosslinking reaction combining CMC and citric acid, which results in the formation of an ester bond between the two polymer chains. The crosslinking reaction is confirmed by Fourier transform infrared spectroscopy and total carboxyl content analysis. According to the physicochemical, thermal, and mechanical analysis, we have identified that 7 %, 9 % and 10 % citric acid showed the most promising hydrogels and found 7CMC hydrogel had superior quality. In vitro results demonstrated that the citric acid crosslinked CMC had excellent hemocompatibility and cytocompatibility.

Development of soy protein isolate/sodium carboxymethyl cellulose synbiotic microgels by double crosslinking with transglutaminase and aluminum chloride for delivery system of Lactobacillus acidophilus

This study was carried out to develop soy protein isolate (SPI)/sodium carboxymethyl cellulose (NaCMC) synbiotic microgels by applying a double-crosslinking technique using transglutaminase and different concentrations of AlCl₃ (0, 6, 7, 8 %) and also by adding Lactobacillus acidophilus (L. acidophilus) and pectic oligosaccharide. Synbiotic microgels crosslinked using 8 % AlCl₃ (SPI/NaCMC-Al³⁺₈ microgels) showed the highest encapsulation efficiency (92 %). The double-crosslinked microgels exhibited a smooth surface as proved by SEM. FT-IR, XRD, and DSC analyses showed the possible interaction within matrices and demonstrated the higher thermal stability of synbiotic microgels prepared using a higher concentration of AlCl₃. All in all, after exposure to simulated digestion fluid, heat treatment (72 °C, 15 s), and refrigerated storage, more cells in double-crosslinked microgels survived compared to single-crosslinked microgels. In particular, probiotic viability was highest in SPI/NaCMC-Al³⁺₈ microgels. These results indicate that the SPI/NaCMC-Al³⁺₈ microgels developed in this study can effectively protect L. acidophilus against the external environment.

Stimuli-Responsive and Antibacterial Cellulose-Chitosan Hydrogels Containing Polydiacetylene Nanosheets

Herein, we report a stimuli-responsive hydrogel with inhibitory activity against Escherichia coli prepared by chemical crosslinking of carboxymethyl chitosan (CMCs) and hydroxyethyl cellulose (HEC). The hydrogels were prepared by esterification of chitosan (Cs) with monochloroacetic acid to produce CMCs which were then chemically crosslinked to HEC using citric acid as the crosslinking agent. To impart a stimuli responsiveness property to the hydrogels, polydiacetylene-zinc oxide (PDA-ZnO) nanosheets were synthesized in situ during the crosslinking reaction followed by photopolymerization of the resultant composite. To achieve this, ZnO was anchored on carboxylic groups in 10,12-pentacosadiynoic acid (PCDA) layers to restrict the movement of the alkyl portion of PCDA during crosslinking CMCs and HEC hydrogels. This was followed by irradiating the composite with UV radiation to photopolymerize the PCDA to PDA within the hydrogel matrix so as to impart thermal and pH responsiveness to the hydrogel. From the results obtained, the prepared hydrogel had a pH-dependent swelling capacity as it absorbed more water in acidic media as compared to basic media. The incorporation of PDA-ZnO resulted in a thermochromic composite responsive to pH evidenced by a visible colour transition from pale purple to pale pink. Upon swelling, PDA-ZnO-CMCs-HEC hydrogels had significant inhibitory activity against E. coli attributed to the slow release of the ZnO nanoparticles as compared to CMCs-HEC hydrogels. In conclusion, the developed hydrogel was found to have stimuli-responsive properties and inhibitory activity against E. coli attributed to zinc nanoparticles.

Synthesis and Characterization of Starch-Based Acid- and Alkali-Resistant Hydrogels Optimized by Box–Behnken Response Surface Methodology

Applying gel-type solid chlorine dioxide for the sustained release of chlorine dioxide has several shortcomings, such as no resistance to acid and alkali corrosion and poor mechanical properties. However, introducing quaternary ammonium, carboxyl, and amino groups into the hydrogel system can enhance its acid and alkali resistance. In this study, the effects of concentration of dry heat-modified starch, quaternized carboxymethyl cellulose, and chitin on the swelling behavior and mechanical properties of starch-based acid- and alkali-resistant hydrogels are investigated. The feasibility of the actual and predicted values of the tentative results is verified based on the response surface design to determine the optimal concentration ratio of acid- and alkali-resistant hydrogels. The results reveal that optimized process parameters are reliable. The maximum swelling ratio and compressive stress of the hydrogel are 5358.00% and 44.45 kPa, respectively, and its swelling behavior conforms to the pseudo second-order kinetic model. Thus, the present study can provide a new method of developing efficient starch-based chlorine dioxide hydrogels for the sustained release of chlorine dioxide.

Source of Nanocellulose and Its Application in Nanocomposite Packaging Material: A Review

Food packaging nowadays is not only essential to preserve food from being contaminated and damaged, but also to comply with science develop and technology advances. New functional packaging materials with degradable features will become a hot spot in the future. By far, plastic is the most common packaging material, but plastic waste has caused immeasurable damage to the environment. Cellulose known as a kind of material with large output, wide range sources, and biodegradable features has gotten more and more attention. Cellulose-based materials possess better degradability compared with traditional packaging materials. With such advantages above, cellulose was gradually introduced into packaging field. It is vital to make packaging materials achieve protection, storage, transportation, market, and other functions in the circulation process. In addition, it satisfied the practical value such as convenient sale and environmental protection, reduced cost and maximized sales profit. This review introduces the cellulose resource and its application in composite packaging materials, antibacterial active packaging materials, and intelligent packaging materials. Subsequently, sustainable packaging and its improvement for packaging applications were introduced. Finally, the future challenges and possible solution were provided for future development of cellulose-based composite packaging materials.

Synthesis and characterization of photo-crosslinkable cinnamate-functionalized pectin

The polysaccharide pectin (PC) was functionalized with the photo-responsive cinnamic acid hydrazide (CN) to produce the photo-crosslinkable PC-CN hydrogel material that was then evaluated as a carrier for encapsulation of the drug model aspirin. Cinnamic acid hydrazide was first prepared and then incorporated with the abundant -COOCH₃ groups on the pectin chain via hydrazide linkage. The obtained polymeric derivatives have been characterized by means of instrumental techniques including FTIR and NMR. The obtained PC-CN hydrogels with different cinnamic functionality were also freeze-dried and examined by SEM, which indicated more coherent hydrogel texture by increasing the cinnamic functionalization. The effect of the photo-curing time, as well as the functionalization degree, on the swelling and gelation of the obtained hydrogel was also studied to evaluate the potential of the developed material in drug delivery systems using aspirin as a common and available drug model. The developed PC-CN hydrogel materials exhibited high potential as a drug carrier that enables the control of the drug release via optimizing both the degree of cinnamic functionality and the photo-curing time.

Viscoelastic and smart swelling disposition of Carboxymethylcellulose based hydrogels substantiated by Gemini surfactant and in-vitro encapsulation and controlled release of Quercetin

CMC-SA-12-E2-12 hydrogels were prepared from Carboxymethylcellulose (CMC), succinic acid (SA) (biocompatible cross-linker) and Ethane-1,2-diyl-bis(N, N-dimethyl-N-dodecylammoniumacetoxy) (referred as 12-E2-12) (0.0006, 0.0015, 0.003, 0.0045 mMoles) by thermal treatment with economical and easy solution polymerization strategy. The CMC-SA-12E2-12 hydrogels were characterized for mechanical and viscoelastic properties like self-healing, viscosity and modulus using rheological analysis. Further the structural, morphological and thermal properties were investigated by FTIR, SEM and TGA analysis. The investigation revealed significant modulation in mechanical, viscoelastic, self-healing and drug release behavior with the addition of 12-E2-12. The CMC-SA-12-E2-12 hydrogels were investigated for drug release studies in PBS 7.4 for 48 h using Quercetin dihydrate. The results showed sustained release behavior at optimised concentration values of surfactant. Release data fitted nicely to the Higuchi model and hence the release could be seen to be diffusion controlled phenomenon or Fickian diffusion. The biocompatibility of cross-linker and surfactant may potentially make the hydrogels suitable for drug delivery applications.

pH-Responsive Eco-Friendly Chitosan–Chlorella Hydrogel Beads for Water Retention and Controlled Release of Humic Acid

For improving the mechanical strength of controlled release fertilizer (CRF) hydrogels, a novel material of Chlorella was employed as a bio-based filler to prepare chitosan–chlorella hydrogel beads with physical crosslink method. Here, the synthesis mechanism was investigated, and the chitosan–chlorella hydrogel beads exhibited enhanced mechanical stability under centrifugation and sonication than pure chitosan hydrogel beads. Chlorella brought more abundant functional groups to original chitosan hydrogel, hence, chitosan–chlorella hydrogel beads represented greater sensitivity and controllable response to external factors including pH, salt solution, temperature. In distilled water, the hydrogel beads with 40 wt% Chlorella reached the largest water absorption ratio of 42.92 g/g. Moreover, the mechanism and kinetics process of swelling behavior of the chitosan–chlorella hydrogel beads were evaluated, and the loading and releasing of humic acid by the hydrogel beads as a carrier material were pH-dependent and adjustable, which exhibit the potential of chitosan–chlorella hydrogel beads in the field of controlled release carrier biomaterials.

Carboxymethyl Cellulose Hydrogel from Biomass Waste of Oil Palm Empty Fruit Bunch Using Calcium Chloride as Crosslinking Agent

Carboxymethyl cellulose (CMC) is modified cellulose extracted from oil palm empty fruit bunch (OPEFB) biomass waste that has been prepared through etherification using sodium monochloroacetate (SMCA) in the presence of sodium hydroxide. In this research, CMC hydrogel was prepared using calcium chloride (CaCl₂) as the chemical crosslinker. Throughout the optimization process, four important parameters were studied, which were: (1) CMC concentration, (2) CaCl₂ concentration, (3) reaction time, and (4) reaction temperature. From the results, the best gel content obtained was 28.11% at 20% (w/v) of CMC with 1% (w/v) of CaCl₂ in 24 h reaction at room temperature. Meanwhile, the degree of swelling for CMC hydrogel was 47.34 g/g. All samples were characterized using FT-IR, XRD, TGA, and FESEM to study and compare modification on the OPEFB cellulose. The FT-IR spectrum of CMC hydrogel showed a shift of COO^- peaks at 1585 cm^-1 and 1413 cm^-1, indicating the substitution of Ca²⁺ into the CMC molecular chains. The XRD diffractogram of CMC hydrogel showed no observation of sharp peaks, which signified an amorphous hydrogel phase. The CrI value also proved the decrement of the crystalline nature of CMC hydrogel. TGA-DTG thermograms showed that the T_max of CMC hydrogel at 293.33 °C is slightly better in thermal stability compared to CMC. Meanwhile, the FESEM micrograph of CMC hydrogel showed interconnected pores indicating the crosslinkages in CMC hydrogel. CMC hydrogel was successfully synthesized using CaCl₂ as a crosslinking agent, and its swelling ability can be used in various applications such as drug delivery systems, industrial effluent, food additives, heavy metal removal, and many more.

Effect of new crystalline phase on the ionic conduction properties of sodium perchlorate salt doped carboxymethyl cellulose biopolymer electrolyte films

Dopant induced modifications in the microstructure of sodium carboxymethyl cellulose (NaCMC) were characterized by FTIR, XRD, DSC and EIS techniques. FTIR analysis exhibited a considerable microstructural modification in NaCMC upon NaClO4⋅H2O doping invoked through complex formation via Lewis acid-base interaction and hydrogen bond formation between ions and dipoles. This resulted in the modification in the orderliness/disorderliness of polymer chains as observed from XRD deconvolution. At higher salt concentrations, the complexity of the network causes the formation of new amorphous and crystalline phases as reflected in the XRD studies. DSC analysis showed an increase in Tg as the salt concentration increased, indicating a reduction in polymer chains flexibility. The contribution of free ions has masked over the enhancement in amorphous content to conductivity at a lower concentration of salt in the matrix, later on, the formation of a new crystalline phase due to transient crosslinks by Na+…ClO4−…Na+ has affected the ion transport process.

Development of carboxymethylcellulose based composites for bone tissue engineering

The present study focuses on the development of carboxymethylcellulose (CMC)–biphasic calcium phosphate (BCP) composite scaffolds through the freeze-drying process for bone tissue engineering applications. Citric acid or fumaric acid was added as the cross-linker of CMC to improve the stability of composite scaffolds. The effect of change in freezing temperature (−20, −40 or −80°C) on the pore morphology, swelling ability and mechanical properties of composite scaffolds was studied. Cross-linked scaffolds showed an increased thermal degradation temperature compared with non-cross-linked scaffolds. All the composite scaffolds showed a porous structure with homogeneous blending of CMC and BCP. Cross-linked scaffolds showed appreciable swelling ability and stability in phosphate-buffered saline, while non-cross-linked scaffolds were unstable for 24 h. Cross-linked scaffolds had lower compressive strength than non-cross-linked scaffolds under dry conditions. However, in the hydrated state, only citric acid-cross-linked scaffolds were stable with improved compressive strength of 64 ± 4, 57 ± 4 and 67 ± 4 kPa when processed at −20, −40 and −80°C, respectively. Furthermore, three-dimensional culture of Saos-2 cells on citric acid-cross-linked scaffolds showed their suitability for cell proliferation and osteogenic differentiation. Therefore, citric acid-cross-linked CMC–BCP composite scaffolds may be promising scaffolds for bone tissue engineering applications.

Carboxymethyl cellulose-chitosan composite hydrogel: Modelling and experimental study of the effect of composition on microstructure and swelling response

Molecular recognition is essential for the advancement of functional supramolecular natural polymer-based hydrogels. First, a series of carboxymethyl cellulose (CMC)-chitosan (CSN) hydrogels crosslinked with fumaric acid are studied, where the influence of composition on microstructure and swelling is investigated using mathematical modelling and experiment and the hydrolytic properties, microstructure parameters and physicochemical properties are examined. Second, best fit values for the responses are obtained using multiple linear regression and MATLAB R2020a curve fitting and predictive models are generated. Third, the optimum microstructure is loaded with polyethylene glycol (PEG) and bismuth telluride (Bi₂Te₃) and coated on fabric for imparting thermal sensitivity. The results show that (1) optimum microstructure (25.65 ± 1.86 nm mesh size, 116.25 ± 0.00 μmol/cm³ effective crosslinking-density, 348.03 ± 10.81% swelling, and 62.86 ± 1.11% gel fraction) is found at CMC:CSN = 1:3 for G3; (2) the model shows good agreement with experimental data demonstrating potential for estimating hydrogel swelling and microstructure; and (3) G3/PEG and G3/PEG/Bi₂Te₃ enhance thermal conductivity of fabric at ambient, body, and elevated temperatures. The study demonstrates the potential of the generated model in predicting CMC-CSN swelling and G3 as an ideal host matrix for wearable textiles/devices.

In Vitro and In Vivo Evaluation of Carboxymethyl Cellulose Scaffolds for Bone Tissue Engineering Applications

The present study involves the development of citric acid-cross-linked carboxymethyl cellulose (C3CA) scaffolds by a freeze-drying process. Scaffolds were fabricated at different freezing temperatures of -20, -40, or -80 °C to investigate the influence of scaffold pore size on bone regeneration. All three scaffolds were porous in structure, and the pore size was measured to be 74 ± 4, 55 ± 6, and 46 ± 5 μm for -20, -40, and -80 °C scaffolds. The pores were larger in scaffolds processed at -20 °C compared to -40 and -80 °C, indicating the reduction in pore size of the scaffolds with a decrease in freezing temperature. The cytocompatibility, cell proliferation, and differentiation in C3CA scaffolds were assessed with the Saos-2 osteoblast cell line. These scaffolds supported the proliferation and differentiation of Saos-2 cells with significant matrix mineralization in scaffolds processed at -40 °C. Subcutaneous implantation of C3CA scaffolds in the rat model was investigated for its ability of vascularization and new matrix tissue formation. The matrix formation was observed at the earliest of 14 days in the scaffolds when processed at -40 °C while it was observed only after 28 days of implantation with the scaffolds processed at -20 and -80 °C. These results suggest that the citric acid-cross-linked CMC scaffolds processed at -40 °C can be promising for bone tissue engineering application.

Dual-responsive carboxymethyl cellulose/dopamine/cystamine hydrogels driven by dynamic metal-ligand and redox linkages for controllable release of agrochemical

The utilization of agrochemicals in crop production is often inefficient due to lack of appropriate carriers, raising in the significant concerns of ecological environment and public health. To enhance the efficiency of agrochemical delivery, a novel cellulose-based hydrogel was constructed in this work by cross-linking dopamine (DA)-modified carboxymethyl cellulose (CMC) with cystamine (CYS) in the presence of Fe³⁺ ions. The hydrogels displayed reversible sol-gel transitions upon exposure to stimulation of changes in pH and redox, leading to the controllable release of model agrochemical (6-benzyladenine). Compared with single-triggered condition, the hydrogel doubled the cumulative release when co-triggered by pH and redox. The dynamic metal/catechol complexation and disulfide bonding coexist in the hydrogel networks, enabling occurrence of dynamic reaction under a variety of environmental conditions. The finite element method (FEM) was employed to simulate the hydrogel to provide a theoretical insight into the tested drug delivery. Benefitting from the reversibly cross-linked networks and the excellent biodegradability of the hydrogels, we anticipate that this dual-responsive, polysaccharide-based hydrogel will offer diverse applications to reach the full potential in sustainable advancement of crop production.

Controlled release of Mitomycin C from modified cellulose based thermo-gel prevents post-operative de novo peritoneal adhesion

The complications from surgery associated peritoneal adhesion can be alleviated by combination of physical isolation and pharmaceutical treatment. This work aims to develop thermo-sensitive hydrogel barrier by combining mitomycin C (MMC) with modified tempo oxidized nanocellulose (cTOCN) through EDC/NHS-chemical conjugation followed by integration with methyl cellulose (MC). The MMC was successfully combined with cTOCN and ensured controlled release of MMC from hydrogel throughout 14 days. Amount of MC (1.5, 2.5, 3.5% w/v) was proportional to gelation time and inversely proportional to degradation of hydrogel. The optimized hydrogel (C2.5T1M0.2) needed only 30 s for thermoreversible sol-gel (4℃-37℃) phenomenon and did not show in vitro fibroblast cells toxicity as well as ensured complete adhesion prevention efficacy, reperitonealization in rat side wall-cecal abrasion model. Overall, the developed C2.5T1M0.2 thermo-gel advances state-of-the-art in view of cytocompatibility, mechanical stability, optimum degradation, good injectability, sustain drug release from surgical sites, and satisfactory de novo anti-adhesion capacity.

Preparation and characterization of polycaprolactone nanocapsules containing pretilachlor as a herbicide nanocarrier

Polycaprolactone nanocapsules (PCL) containing pretilachlor were prepared, and Fourier transform infrared spectroscopy, atomic force microscopy, and transmission electron microscopy were used for their structural and morphological investigations. The results revealed that the nanocapsules had irregular shape and their particles size was in the range of 70-200 nm. The encapsulation efficiency of pretilachlor was measured as 99.5 ± 1.3% using high-performance liquid chromatography analysis. The physicochemical stability studies over 60 days showed that the nanocapsules were stable in the suspension without any aggregation. The herbicide activity was examined in a pre-emergence manner using barnyard grass as a target plant and rice as a non-target plant. The nanoformulation had no negative effect on rice plant. However, its effect on barnyard grass was significant. The cytotoxicity analysis indicated that the nanocapsulated herbicide is less toxic rather than the commercial formulation. Therefore, encapsulation of pretilachlor in PCL nanocapsules can be used effectively to construct environmentally friendly PCL-herbicide systems in agriculture.

Eco-friendly porous carboxymethyl cellulose/dextran sulfate composite beads as reusable and efficient adsorbents of cationic dye methylene blue

Eco-friendly hydrogel composite beads based on crosslinked-carboxymethyl cellulose (CMC) and dextran sulfate (DS) embedded within network were prepared using ionotropic gelation in presence of sodium n-dodecyl sulfate (SDS) as pore-forming template. The milligels composites C/Dx were characterized by FTIR, SEM/EDX and TGA analyses. The composites exhibited porous structure and enhance in swelling properties with enriching DS as well as pH-sensitivity. The effect of DS on adsorption of composites for cationic dye methylene blue (MB) was investigated by changing influencing factors: pH, adsorbent dosage, time contact, dye concentration, and temperature. The results revealed that adsorption performances were remarkably improved by increasing DS content into beads. Kinetics and isotherm adsorption studies revealed pseudo second-order and Langmuir isotherm as befitting models. The maximum Langmuir equilibrium adsorption capacity (q_m) was found to increase from 82 mg g^-1 for C/D0 to 526 mg g^-1 for C/D1. Thermodynamic study revealed spontaneous and endothermic process nature. Furthermore, milligels displayed good reusability after five adsorption/desorption cycles and with an augment in their removal ability compared to starting ones, reaching 714 mg g^-1 for R-C/D1. In view of easy preparation and recovery, effectiveness adsorption and good regeneration, the composites could be applied as low-cost adsorbents in wastewater treatment.

Preparation, optimization and swelling study of carboxymethyl sago starch (CMSS)-acid hydrogel

In this study, sago starch was modified in order to enhance its physicochemical properties. Carboxymethylation was used to introduce a carboxymethyl group into a starch compound. The carboxymethyl sago starch (CMSS) was used to prepare smart hydrogel by adding acetic acid into the CMSS powder as the crosslinking agent. The degree of substitution of the CMSS obtained was 0.6410. The optimization was based on the gel content and degree of swelling of the hydrogel. In this research, four parameters were studied in order to optimize the formation of CMSS–acid hydrogel. The parameters were; CMSS concentration, acetic acid concentration, reaction time and reaction temperature. From the data analyzed, 76.69% of optimum gel content was obtained with 33.77 g/g of degree of swelling. Other than that, the swelling properties of CMSS–acid hydrogel in different media such as salt solution, different pH of phosphate buffer saline solution as well as acidic and alkaline solution were also investigated. The results showed that the CMSS–acid hydrogel swelled in both alkaline and salt solution, while in acidic or low pH solution, it tended to shrink and deswell. The production of the hydrogel as a smart material offers a lot of auspicious benefits in the future especially related to swelling behaviour and properties of the hydrogel in different types of media.

Functionalized Electrospun Poly(Vinyl Alcohol) Nanofibrous Membranes with Poly(Methyl Vinyl Ether-Alt-Maleic Anhydride) for Protein Adsorption

In this work, electrospun poly(vinyl alcohol) (PVA) nanofiber membranes were functionalized by incorporating poly(methyl vinyl ether-alt-maleic anhydride) (poly(MVE/MA), PMA) for the selective adsorption of proteins. The capture performance was regulated by an optimizing buffer pH, PMA content, and protein concentration. Lysozyme was used as the model protein and a high adsorption capacity of 476.53 ± 19.48 was obtained at pH 6, owing to the electrostatic attraction between the negatively charged nanofibers and positively charged proteins. The large specific surface area, highly open porous structure, and abundant available carboxyl groups contributed to such high adsorption performance. Moreover, the nanofiber membranes exhibited good reusability and good selectivity for positively charged proteins. The obtained results can provide a promising method for the purification of proteins in small analytic devices.

Biopolymer-based strategies in the design of smart medical devices and artificial organs

Advances in regenerative medicine and in modern biomedical therapies are fast evolving and set goals causing an upheaval in the field of materials science. This review discusses recent developments involving the use of biopolymers as smart materials, in terms of material properties and stimulus-responsive behavior, in the presence of environmental physico-chemical changes. An overview on the transformations that can be triggered in natural-based polymeric systems (sol-gel transition, polymer relaxation, cross-linking, and swelling) is presented, with specific focus on the benefits these materials can provide in biomedical applications.