Water soluble folate-chitosan nanogels crosslinked by genipin

An Investigation into the Effects of Processing Factors on the Properties and Scaling-Up Potential of Propranolol-Loaded Chitosan Nanogels

Chitosan-triphosphate (TPP) nanogels are widely studied drug delivery carrier systems, typically prepared via a simple mixing process. However, the effects of the processing factors on nanogel production have not been extensively explored, despite the importance of understanding and standardising such factors to allow upscaling and commercial usage. This study aims to systematically evaluate the effects of various fabrication and processing factors on the properties of nanogels using a Design of Experiment approach. Hydrodynamic size, polydispersity index (PDI), zeta potential, and encapsulation efficiency were determined as the dependent factors. The temperature, stirring rate, chitosan grade, crosslinker choice, and the interaction term between temperature and chitosan grade were found to have a significant effect on the particle size, whereas the effect of temperature and the addition rate of crosslinker on the PDI was also noteworthy. Moreover, the addition rate of the crosslinker and the volume of the reaction vessel were found to impact the encapsulation efficiency. The zeta potential of the nanogels was found to be governed by the chitosan grade. The optimal fabrication conditions for the development of medium molecular weight chitosan and TPP nanogels included the following: the addition rate for TPP solution was set at 2 mL/min, while the solution was then stirred at a temperature of 50 °C and a stirring speed of 600 rpm. The volume of the glass vial used was 28 mL, while the stirrer size was 20 mm. The second aim of the study was to evaluate the potential for scaling up the nanogels. Size and PDI were found to increase from 128 nm to 151 nm and from 0.232 to 0.267, respectively, when the volume of the reaction mixture was increased from 4 to 20 mL and other processing factors were kept unchanged. These results indicate that caution is required when scaling up as the nanogel properties may be significantly altered with an increasing production scale.

Reaction kinetics of chitosan nanogels crosslinked by genipin

Crosslinking of chitosan chains in dilute solution by natural crosslinker genipin leads to biocompatible nanogels. Here we investigated the reaction kinetics between chitosan and genipin in a 200 mM acetate buffer at 37 °C, and the structural and conformational evolutions of the nanogels during the crosslinking reaction by multi detection asymmetric flow field-flow fractionation (AF4). Upon crosslinking by genipin, the z-average hydrodynamic radius Rhz of the chitosan chains increased from 26 nm to 130 nm, while the weight average molar mass Mw increased from 2.0 × 105 g/mol to 1.8 × 107 g/mol. The crosslinking reaction appeared to be first-order and size-dependent. In particular, the intrachain crosslinking reaction was preferentially for nanogels having the larger size, leading to formation of branched chains/nanogels having a wide range of molar masses between 106 and 108 g/mol but a similar radius of gyration Rg ∼ 40 nm. For the largest nanogel fractions with M > 2.0 × 108 g/mol, both Rg and Rh showed a scaling relation with exponent 1/3 and a structure parameter Rg/Rh = 0.74, as expected for the hard sphere particle. The reaction was accompanied by a reduction of charge density and an increase in hydrophobicity of chitosan nanogels, which plays a key role in the formation of uniform size nanogels with chain density ρ(Rh) up to 0.45 g/cm3.

Chitosan-Based Composites: Development and Perspective in Food Preservation and Biomedical Applications

Chitin, which may be the second-most common polymer after cellulose, is the raw material of chitosan. Chitosan has been infused with various plant extracts and subsidiary polymers to improve its biological and physiological properties. Chitosan's physicochemical properties are enhanced by blending, making them potential candidates that can be utilized in multifunctional areas, including food processing, nutraceuticals, food quality monitoring, food packaging, and storage. Chitosan-based biomaterials are biocompatible, biodegradable, low toxic, mucoadhesive, and regulate chemical release. Therefore, they are used in the biomedical field. The present manuscript highlights the application of chitosan-based composites in the food and biomedical industries.

Recent Development of Functional Chitosan-Based Hydrogels for Pharmaceutical and Biomedical Applications

Chitosan is a promising naturally derived polysaccharide to be used in hydrogel forms for pharmaceutical and biomedical applications. The multifunctional chitosan-based hydrogels have attractive properties such as the ability to encapsulate, carry, and release the drug, biocompatibility, biodegradability, and non-immunogenicity. In this review, the advanced functions of the chitosan-based hydrogels are summarized, with emphasis on fabrications and resultant properties reported in literature from the recent decade. The recent progress in the applications of drug delivery, tissue engineering, disease treatments, and biosensors are reviewed. Current challenges and future development direction of the chitosan-based hydrogels for pharmaceutical and biomedical applications are prospected.

Large-Scale Cultivation of Magnetotactic Bacteria and the Optimism for Sustainable and Cheap Approaches in Nanotechnology

Magnetotactic bacteria (MTB), a diverse group of marine and freshwater microorganisms, have attracted the scientific community's attention since their discovery. These bacteria biomineralize ferrimagnetic nanocrystals, the magnetosomes, or biological magnetic nanoparticles (BMNs), in a single or multiple chain(s) within the cell. As a result, cells experience an optimized magnetic dipolar moment responsible for a passive alignment along the lines of the geomagnetic field. Advances in MTB cultivation and BMN isolation have contributed to the expansion of the biotechnological potential of MTB in recent decades. Several studies with mass-cultured MTB expanded the possibilities of using purified nanocrystals and whole cells in nano- and biotechnology. Freshwater MTB were primarily investigated in scaling up processes for the production of BMNs. However, marine MTB have the potential to overcome freshwater species applications due to the putative high efficiency of their BMNs in capturing molecules. Regarding the use of MTB or BMNs in different approaches, the application of BMNs in biomedicine remains the focus of most studies, but their application is not restricted to this field. In recent years, environment monitoring and recovery, engineering applications, wastewater treatment, and industrial processes have benefited from MTB-based biotechnologies. This review explores the advances in MTB large-scale cultivation and the consequent development of innovative tools or processes.

Fabrication of Chitosan-Based Network Polysaccharide Nanogels

In this study, we developed a method to fabricate chitosan-based network polysaccharides via the condensation between amino groups in water-soluble chitosan (WSCS) and a carboxylate-terminated maltooligosaccharide crosslinker. We previously reported on the fabrication of network-polysaccharide-based macroscopic hydrogels via the chemical crosslinking of water-soluble chitin (WSCh) with the crosslinker. Because the molecular weight of the WSCS was much smaller than that of the WSCh, in the present investigation, the chemical crosslinking of the WSCS with the crosslinker was observed at the nanoscale upon the condensation between amino and carboxylate groups in the presence of a condensing agent, 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride, and N-hydroxysuccinimide, affording nano-sized chitosan-based network polysaccharides. The occurrence of the crosslinking via the formation of amido linkages was supported by the IR analysis and ¹H NMR measurements after the dissolution via acid hydrolysis in DCl/D₂O. The products formed nanogels, whose sizes depended on the amino/carboxylate feed ratio. The nanoscale morphology and size of the products were evaluated via scanning electron microscopy, dynamic light scattering analyses, and transition electron microscopy. In the present study, we successfully developed the method to fabricate nanogel materials based on network polysaccharide structures, which can practically be applied as new polysaccharide-based 3D bionanomaterials.

Genipin, an Inhibitor of UCP2 as a Promising New Anticancer Agent: A Review of the Literature

Genipin is a protein cross-linking agent extracted from Gardenia (Gardenia jasminoides Ellis) fruits. This fruit has conventionally been used as a Chinese herbal medicine for the treatment of inflammation and jaundice and as an edible colorant in oriental countries. Uncoupling protein (UCP)-2 is a member of the family of uncoupling proteins, which are anion transporters positioned in the mitochondrial inner membrane. Genipin has been shown to have hepatoprotective activity, acting as an effective antioxidant and inhibitor of mitochondrial UCP2, and is also reported to exert significant anticancer effects. In this review, the author presents the latest progress of genipin as an anticancer agent and concisely describes its various mechanisms of action. In brief, genipin inhibits UCP2 to attenuate generation of reactive oxygen species (ROS), leading to ROS/c-Jun N-terminal kinase-dependent apoptosis of cancer cells. Genipin also increases the tissue inhibitors of matrix metalloproteases (MMP)-2, a kind of tumor promoter in a variety of cancers, as well as induces caspase-dependent apoptosis in in vitro and in vivo models. These findings suggest that genipin can serve as a promising novel antitumor agent that could be applicable for chemotherapy and/or chemoprevention for cancers.

Cellulosic films reinforced by chitosan-citric complex for meat preservation: Influence of nonenzymatic browning

The methods to obtain cellulose-chitosan composite films exhibiting excellent water-resisting and antibacterial abilities have been widely explored. Cellulose-chitosan-citric films (C-Chx-F) were successfully obtained by a facile coating of chitosan-citric complex on the surface of cellulose. The occurrence of nonenzymatic browning at 80 °C improved the thermal stability, water-resistance, mechanical property and oxygen-barrier ability of C-Chx-F membranes. C-Ch3-F hydrogel showed excellent breaking stress of 6.03 ± 0.25 MPa, and elastic module of 27.09 ± 1.21 MPa, probably assigned to nonenzymatic browning. Under different test temperatures, the nonenzymatic browning and the content of chitosan-citric complex will significantly improve the oxygen barrier property of membranes (P < 0.05), and C-Ch3-F membrane represented the value of oxygen permeation below the detection level. Excellent antibacterial capability of C-Chx-F hydrogels demonstrated that polycationic chitosan-citric complex immobilized in films still retained excellent antibacterial ability. The excellent decontamination in meat preservation endowed C-Chx-F films with potential application in food packaging.

An applied quantum-chemical model for genipin-crosslinked chitosan (GCS) nanocarrier

The genipin-crosslinked chitosan (GCS) nanocarrier has received a lot of attention due to its unique biological and chemical properties as an effective drug delivery system. GCS was modeled by considering two chitosan (CS) polymer sequences with six monomer units that are crosslinked by genipin. To investigate the characteristics of this model, we considered it as a nanocarrier of the anti-cancer drug cladribine (2CdA). Seven configurations of GCS and 2CdA (GCS/2CdA1-7) were optimized at M06-2X/6-31G(d,p) in aqueous solution. The average binding energy above 100 kJ mol^-1 indicates a high drug loading amount. The high adsorption of the drug on GCS is due to the hydrogen bonds that were investigated by AIM analysis. Hydrogen bonds also allow the drug to be released more slowly. These results were confirmed by experimental evidence and the comparison of this model with the simple model of one polymer chain. Also, the mechanism of GCS formation was investigated by calculating the activation parameters, which indicates that solvent (H₂O) molecules are explicitly involved in the formation of GCS.

Gardenia jasminoides Ellis: Ethnopharmacology, phytochemistry, and pharmacological and industrial applications of an important traditional Chinese medicine

ETHNOPHARMACOLOGICAL RELEVANCE

Gardenia jasminoides Ellis is a popular shrub in the Rubiaceae family. The desiccative ripe fruits of this plant (called Zhizi in China) are well known and frequently used not only as an excellent natural colourant, but also as an important traditional medicine for the treatment of different diseases, such as reducing fire except vexed, clearing away heat evil, and cooling blood and eliminating stasis to activate blood circulation. It has also been declared as the first batch of dual-purpose plants used for food and medical functions in China.

AIM OF THE STUDY

This review aims to provide a critical and systematic summary of the traditional uses, ethnopharmacology, phytochemistry, pharmacology, toxicity and industrial applications of Gardenia jasminoides Ellis and briefly proposes several suggestions for future application prospects.

MATERIALS AND METHODS

The related information on Gardenia jasminoides Ellis was obtained from internationally recognized scientific databases through the Internet (PubMed, CNKI, Google Scholar, Baidu Scholar, Web of Science, Medline Plus, ACS, Elsevier and Flora of China) and libraries.

RESULTS

Approximately 162 chemical compounds have been isolated and identified from this herb. Among them, iridoid glycosides and yellow pigment are generally considered the main bioactive and characteristic ingredients. Various pharmacological properties, such as a beneficial effect on the nervous, cardiovascular and digestive systems, hepatoprotective activity, antidepressant activity, and anti-inflammatory activity, were also validated in vitro and in vivo. Moreover, geniposide and genipin are the most important iridoid compounds isolated from Gardenia jasminoides Ellis, and genipin is the aglycone of geniposide. As the predominant active ingredient with a distinct pharmacological activity, genipin is also an outstanding biological crosslinking agent. Gardenia yellow pigment has also been widely used as an excellent natural dye-stuff. Hence, Gardenia jasminoides Ellis has been applied to many other fields, including the food industry, textile industry and chemical industry, in addition to its predominant medicinal uses.

CONCLUSIONS

According to this review, Gardenia jasminoides Ellis is outstanding traditional medical plant used in medicine and food. Pharmacological investigations support the traditional use of this herb and may validate the folk medicinal use of Gardenia jasminoides Ellis to treat different diseases. Iridoid glycosides are potential medicines. Gardenia yellow pigment has been the most important source of a natural colourant for food, cloth and paint for thousands of years. This herb has made great contributions to human survival and development. Moreover, it has also achieved outstanding progress in human life and even in art. Although Gardenia jasminoides Ellis has extremely high and comprehensive utilization values, it is still far from being completely explored. Therefore, the comprehensive development of Gardenia jasminoides Ellis deserves further analysis.

Recent advances in engineered chitosan-based nanogels for biomedical applications

Recent progress in the preparation and biomedical applications of engineered chitosan-based nanogels has been comprehensively reviewed.

Self-Assembled Modified Soy Protein/Dextran Nanogel Induced by Ultrasonication as a Delivery Vehicle for Riboflavin

A simple and green approach was developed to produce a novel nanogel via self-assembly of modified soy protein and dextran, to efficiently deliver riboflavin. First, modified soy protein was prepared by heating denaturation at 60 °C for 30 min or Alcalase hydrolysis for 40 min. Second, modified soy protein was mixed with dextran and ultrasonicated for 70 min so as to assemble nanogels. The modified soy protein-dextran nanogels were characterized by Fourier-transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) and ζ-potential studies to confirm the formation of NGs. Transmission electron microscopy (TEM) revealed the NGs to be spherical with core-shell structures, in the range of 32-40 nm size. The nanogels were stable against various environmental conditions. Furthermore, the particle size of the nanogels hardly changed with the incorporation of riboflavin. The encapsulation efficiency of nanogels was found to be up to 65.9% at a riboflavin concentration of 250 μg/mL. The nanogels exhibited a faster release in simulated intestine fluid (SIF) compared with simulated gastric fluid (SGF). From the results obtained it can be concluded that modified soy protein-dextran nanogels can be considered a promising carrier for drugs and other bioactive molecule delivery purposes.