Mineralization of hydroxyapatite upon a unique xanthan gum hydrogel by an alternate soaking process

Bacteria for Bioplastics: Progress, Applications, and Challenges

Bioplastics are one of the answers that can point society toward a sustainable future. Under this premise, the synthesis of polymers with competitive properties using low-cost starting materials is a highly desired factor in the industry. Also, tackling environmental issues such as nonbiodegradable waste generation, high carbon footprint, and consumption of nonrenewable resources are some of the current concerns worldwide. The scientific community has been placing efforts into the biosynthesis of polymers using bacteria and other microbes. These microorganisms can be convenient reactors to consume food and agricultural wastes and convert them into biopolymers with inherently attractive properties such as biodegradability, biocompatibility, and appreciable mechanical and chemical properties. Such biopolymers can be applied to several fields such as packing, cosmetics, pharmaceutical, medical, biomedical, and agricultural. Thus, intending to elucidate the science of microbes to produce polymers, this review starts with a brief introduction to bioplastics by describing their importance and the methods for their production. The second section dives into the importance of bacteria regarding the biochemical routes for the synthesis of polymers along with their advantages and disadvantages. The third section covers some of the main parameters that influence biopolymers' production. Some of the main applications of biopolymers along with a comparison between the polymers obtained from microorganisms and the petrochemical-based ones are presented. Finally, some discussion about the future aspects and main challenges in this field is provided to elucidate the main issues that should be tackled for the wide application of microorganisms for the preparation of bioplastics.

Current application and modification strategy of marine polysaccharides in tissue regeneration: A review

Marine polysaccharides (MPs) are exceptional bioactive materials that possess unique biochemical mechanisms and pharmacological stability, making them ideal for various tissue engineering applications. Certain MPs, including agarose, alginate, carrageenan, chitosan, and glucan have been successfully employed as biological scaffolds in animal studies. As carriers of signaling molecules, scaffolds can enhance the adhesion, growth, and differentiation of somatic cells, thereby significantly improving the tissue regeneration process. However, the biological benefits of pure MPs composite scaffold are limited. Therefore, physical, chemical, enzyme modification and other methods are employed to expand its efficacy. Chemically, the structural properties of MPs scaffolds can be altered through modifications to functional groups or molecular weight reduction, thereby enhancing their biological activities. Physically, MPs hydrogels and sponges emulate the natural extracellular matrix, creating a more conducive environment for tissue repair. The porosity and high permeability of MPs membranes and nanomaterials expedite wound healing. This review explores the distinctive properties and applications of select MPs in tissue regeneration, highlighting their structural versatility and biological applicability. Additionally, we provide a brief overview of common modification strategies employed for MP scaffolds. In conclusion, MPs have significant potential and are expected to be a novel regenerative material for tissue engineering.

Biomineralization-Inspired Anti-Caries Strategy Based on Multifunctional Nanogels as Mineral Feedstock Carriers

Background

Dentin caries remains a significant public concern, with no clinically viable material that effectively combines remineralization and antimicrobial properties. To address this issue, this study focused on the development of a bio-inspired multifunctional nanogel with both antibacterial and biomineralization properties.

Methods

First, p(NIPAm-co-DMC) (PNPDC) copolymers were synthesized from N-isopropylacrylamide (NIPAm) and 2-methacryloyloxyethyl-trimethyl ammonium chloride (DMC). Subsequently, PNPDC was combined with γ-polyglutamic acid (γ-PGA) through physical cross-linking to form nanogels. These nanogels served as templates for the mineralization of calcium phosphate (Cap), resulting in Cap-loaded PNPDC/PGA nanogels. The nanogels were characterized using various techniques, including TEM, particle tracking analysis, XRD, and FTIR. The release properties of ions were also assessed. In addition, the antibacterial properties of the Cap-loaded PNPDC/PGA nanogels were evaluated using the broth microdilution method and a biofilm formation assay. The remineralization effects were examined on both demineralized dentin and type I collagen in vitro.

Results

PNPDC/PGA nanogels were successfully synthesized and loaded with Cap. The diameter of the Cap-loaded PNPDC/PGA nanogels was measured as 196.5 nm at 25°C and 162.3 nm at 37°C. These Cap-loaded nanogels released Ca2+ and PO43- ions quickly, effectively blocking dental tubules with a depth of 10 μm and promoting the remineralization of demineralized dentin within 7 days. Additionally, they facilitated the heavy intrafibrillar mineralization of type I collagen within 3 days. Moreover, the Cap-loaded nanogels exhibited MIC50 and MIC90 values of 12.5 and 50 mg/mL against Streptococcus mutans, respectively, with an MBC value of 100 mg/mL. At a concentration of 50 mg/mL, the Cap-loaded nanogels also demonstrated potent inhibitory effects on biofilm formation by Streptococcus mutans while maintaining good biocompatibility.

Conclusion

Cap-loaded PNPDC/PGA nanogels are a multifunctional biomimetic system with antibacterial and dentin remineralization effects. This strategy of using antibacterial nanogels as mineral feedstock carriers offered fresh insight into the clinical management of caries.

There Are over 60 Ways to Produce Biocompatible Calcium Orthophosphate (CaPO4) Deposits on Various Substrates

A The present overview describes various production techniques for biocompatible calcium orthophosphate (abbreviated as CaPO4) deposits (coatings, films and layers) on the surfaces of various types of substrates to impart the biocompatible properties for artificial bone grafts. Since, after being implanted, the grafts always interact with the surrounding biological tissues at the interfaces, their surface properties are considered critical to clinical success. Due to the limited number of materials that can be tolerated in vivo, a new specialty of surface engineering has been developed to desirably modify any unacceptable material surface characteristics while maintaining the useful bulk performance. In 1975, the development of this approach led to the emergence of a special class of artificial bone grafts, in which various mechanically stable (and thus suitable for load-bearing applications) implantable biomaterials and artificial devices were coated with CaPO4. Since then, more than 7500 papers have been published on this subject and more than 500 new publications are added annually. In this review, a comprehensive analysis of the available literature has been performed with the main goal of finding as many deposition techniques as possible and more than 60 methods (double that if all known modifications are counted) for producing CaPO4 deposits on various substrates have been systematically described. Thus, besides the introduction, general knowledge and terminology, this review consists of two unequal parts. The first (bigger) part is a comprehensive summary of the known CaPO4 deposition techniques both currently used and discontinued/underdeveloped ones with brief descriptions of their major physical and chemical principles coupled with the key process parameters (when possible) to inform readers of their existence and remind them of the unused ones. The second (smaller) part includes fleeting essays on the most important properties and current biomedical applications of the CaPO4 deposits with an indication of possible future developments.

Polysaccharide-protein microparticles based-scaffolds to recover soft tissue loss in mild periodontitis

Periodontal regeneration is extremely limited and unpredictable due to structural complications, as it requires the simultaneous restoration of different tissues, including cementum, gingiva, bone, and periodontal ligament. In this work, spray-dried microparticles based on green materials (polysaccharides - gums - and a protein - silk fibroin) are proposed to be implanted in the periodontal pocket as 3D scaffolds during non-surgical treatments, to prevent the progression of periodontal disease and to promote the healing in mild periodontitis. Arabic or xanthan gum have been associated to silk fibroin, extracted from Bombyx mori cocoons, and loaded with lysozyme due to its antibacterial properties. The microparticles were prepared by spray-drying and cross-linked by water vapor annealing, inducing the amorphous to semi-crystalline transition of the protein component. The microparticles were characterized in terms of their chemico-physical features (SEM, size distribution, structural characterization - FTIR and SAXS, hydration and degradation properties) and preclinical properties (lysozyme release, antibacterial properties, mucoadhesion, in vitro cells adhesion and proliferation and in vivo safety on a murine incisional wound model). The encouraging preclinical results highlighted that these three-dimensional (3D) microparticles could provide a biocompatible platform able to prevent periodontitis progression and to promote the healing of soft tissues in mild periodontitis.

Recent Advances of Natural Polysaccharide-based Double-network Hydrogels for Tissue Repair

Natural polysaccharide hydrogels have been extensively explored for many years due to their outstanding biocompatibility and biodegradability, which are very promising candidates as artificial soft materials for biomedical applications. However, their inferior mechanical performances greatly limited their applications. Introduction of double-network (DN) structure has been well documented to be an efficient strategy for significant improvement of the mechanical property of hydrogels. Here, recent progress of natural polysaccharide-based DN hydrogels is reviewed from the perspective of fundamental concepts on both design rationale and preparation strategies to biomedical application in tissue repair. Retrospect of the DN-strengthened polysaccharide hydrogels can give a deep insight into the fundamental relationship of such bio-based hydrogels among structural design, mechanical properties and practical demands, thereby prompting their translation to clinical application prospects.

Nano-hydroxyapatite incorporated quince seed mucilage bioscaffolds for osteogenic differentiation of human adipose-derived mesenchymal stem cells

In this study, the therapeutic hydrocolloid quince seed mucilage (QSM) from Cydonia oblonga Miller fruit is enriched with needle-like nano-hydroxyapatite (nHAp) crystals to fabricate a novel biomimetic osteogenic bioscaffold. The molecular weight (M_w) of water-based extracted QSM was measured with GPC (8.67 × 10⁵ g/mol), and the composite blend was prepared at a ratio of 1:1 (w/w) QSM_aq and nHAp. The porous bioscaffolds were manufactured by the freeze-drying method, and evaluated in-depth with advanced analyses. The XRD, ATR-FTIR, SEM-EDX, and elemental mapping analyses revealed a uniform coated semi-crystalline structure with no covalent bindings between QSM and nHAp. Moreover, due to the hydrocolloid backbone, a supreme swelling ratio (w/w, 6523 ± 190%) with suitable pore size (208.12 ± 99.22 μm) for osteogenic development was obtained. Further, the cytocompatible bioscaffolds were evaluated for osteogenic differentiation in vitro using human adipose-derived mesenchymal stem cells (hAMSCs). The immuno/histochemical (I/HC) staining revealed that the cells with the spherical morphology invaded the pores of the prepared bioscaffolds. Also, relatively early up-regulated osteogenic markers were observed by the qRT-PCR analyses. Overall, it is believed that the QSM-nHAp bioscaffolds might be favorable in non-load bearing applications, especially in the cranio-maxillofacial region, due to their regenerative, bendable, and durable features.

Effect on Rheological Properties and 3D Printability of Biphasic Calcium Phosphate Microporous Particles in Hydrocolloid-Based Hydrogels

The production of patient-specific bone substitutes with an exact fit through 3D printing is emerging as an alternative to autologous bone grafting. To the success of tissue regeneration, the material characteristics such as porosity, stiffness, and surface topography have a strong influence on the cell–material interaction and require significant attention. Printing a soft hydrocolloid-based hydrogel reinforced with irregularly-shaped microporous biphasic calcium phosphate (BCP) particles (150–500 µm) is an alternative strategy for the acquisition of a complex network with good mechanical properties that could fulfill the needs of cell proliferation and regeneration. Three well-known hydrocolloids (sodium alginate, xanthan gum, and gelatin) have been combined with BCP particles to generate stable, homogenous, and printable solid dispersions. Through rheological assessment, it was determined that the crosslinking time, printing process parameters (infill density percentage and infill pattern), as well as BCP particle size and concentration all influence the stiffness of the printed matrices. Additionally, the swelling behavior on fresh and dehydrated 3D-printed structures was investigated, where it was observed that the BCP particle characteristics influenced the constructs’ water absorption, particle diffusion out of the matrix and degradability.

Hydroxyapatite Nanoparticles Fortified Xanthan Gum-Chitosan Based Polyelectrolyte Complex Scaffolds for Supporting the Osteo-Friendly Environment

Nanoparticle-reinforced polymer-based scaffolding matrices as artificial bone-implant materials are potential suitors for bone regenerative medicine as they simulate the native bone. In the present work, a series of bioinspired, osteoconductive tricomposite scaffolds made up of nano-hydroxyapatite (NHA) embedded xanthan gum-chitosan (XAN-CHI) polyelectrolyte complex (PEC) are explored for their bone-regeneration potential. The Fourier transform infrared spectroscopy studies confirmed complex formation between XAN and CHI and showed strong interactions between the NHA and PEC matrix. The X-ray diffraction studies indicated regulation of the nanocomposite (NC) scaffold crystallinity by the physical cues of the PEC matrix. Further results exhibited that the XAN-CHI/NHA5 scaffold, with a 50/50 (polymer/NHA) ratio, has optimized porous structure, appropriate compressive properties, and sufficient swelling ability with slower degradation rates, which are far better than those of CHI/NHA and other XAN-CHI/NHA NC scaffolds. The simulated body fluid studies showed XAN-CHI/NHA5 generated apatite-like surface structures of a Ca/P ratio ∼1.66. Also, the in vitro cell-material interaction studies with MG-63 cells revealed that relative to the CHI/NHA NC scaffold, the cellular viability, attachment, and proliferation were better on XAN-CHI/NHA scaffold surfaces, with XAN-CHI/NHA5 specimens exhibiting an effective increment in cell spreading capacity compared to XAN-CHI/NHA4 and XAN-CHI/NHA6 specimens. The presence of an osteo-friendly environment is also indicated by enhanced alkaline phosphatase expression and protein adsorption ability. The higher expression of extracellular matrix proteins, such as osteocalcin and osteopontin, finally validated the induction of differentiation of MG-63 cells by tricomposite scaffolds. In summary, this study demonstrates that the formation of PEC between XAN and CHI and incorporation of NHA in XAN-CHI PEC developed tricomposite scaffolds with robust potential for use in bone regeneration applications.

Xanthan gum as a carrier for bacterial cell entrapment: Developing a novel immobilised biocatalyst

Xanthan gum (XAN) is a widely used polysaccharide in various industries. Because of its unique properties, in this study, an attempt was made to adopt the procedure of xanthan gum cross-linking for the entrapment of bacterial cells that are able to biodegrade naproxen. The developed procedure proved to be completely neutral for Bacillus thuringiensis B1(2015b) cells, which demonstrated a survival rate of 99%. A negative impact of entrapment was noted for strain Planococcus sp. S5, which showed a survival rate in the 93-51% range. To achieve good mechanical properties of the composites, they were additionally hardened using polydopamine (PDA). XAN/PDA composites revealed a high stability in a wide range of pH, and their sorption capacity included both cationic and anionic molecules. Analysis of the survival rate during storage at 4 °C in 0.9% NaCl showed that, after 35 days, 98-99% of B1(2015b) and 47% of S5 cells entrapped in XAN/PDA remained alive. This study also presents the results of naproxen biodegradation conducted using XAN/PDA/B1(2015b) in a trickling filter with autochthonous microflora. Hence, owing to the significant acceleration of drug biodegradation (1 mg/L in 14 days) and the chemical oxygen demand removal, the entrapped B1(2015b) cells in XAN/PDA composites showed a promising potential in bioremediation studies and industrial applications.

Impact of the magnetic field on 3T3-E1 preosteoblasts inside SMART silk fibroin-based scaffolds decorated with magnetic nanoparticles

This paper reports the impact of the magnetic field on 3T3-E1 preosteoblasts within silk-fibroin scaffolds decorated with magnetic nanoparticles. Scaffolds were prepared from silk fibroin and poly(2-hydroxyethyl methacrylate) template in which magnetite nanoparticles were embedded. The presence of the magnetite specific peaks within scaffolds compositions was evidenced by RAMAN analysis. Structural investigation was done by XRD analysis and morphological information including internal structure was obtained through SEM analysis. Geometrical evaluation (size and shape), crystalline structure of magnetic nanoparticles and the morphology of the silk fibroin scaffolds were investigated by HR-TEM. Magnetic nanoparticles were distributed within scaffolds structure. Biomineralization of hydroxyapatite on silk fibroin scaffolds with and without magnetic nanoparticles was investigated by an alternate soaking process. SEM images showed that the magnetic scaffolds were covered in an almost continuously film, which has a phase with nanostructured characteristics. This phase, which has as main components Ca and P, is made of lamellar formations. The design of an original magnetic 3D cell culture setup allowed us to observe cellular modifications under the exposure to magnetic field in the presence of magnetic silk fibroin biomaterials. The cellular proliferation potential of 3T3-E1 cell line was found increased under the magnetic field, especially in the presence of the magnetite nanoparticles. In addition, we showed that the low static magnetic field positively impacts on the osteogenic differentiation potential of the cells inside the biomimetic magnetic scaffolds.

Recent Advances in Natural Gum-Based Biomaterials for Tissue Engineering and Regenerative Medicine: A Review

The engineering of tissues under a three-dimensional (3D) microenvironment is a great challenge and needs a suitable supporting biomaterial-based scaffold that may facilitate cell attachment, spreading, proliferation, migration, and differentiation for proper tissue regeneration or organ reconstruction. Polysaccharides as natural polymers promise great potential in the preparation of a three-dimensional artificial extracellular matrix (ECM) (i.e., hydrogel) via various processing methods and conditions. Natural polymers, especially gums, based upon hydrogel systems, provide similarities largely with the native ECM and excellent biological response. Here, we review the origin and physico-chemical characteristics of potentially used natural gums. In addition, various forms of scaffolds (e.g., nanofibrous, 3D printed-constructs) based on gums and their efficacy in 3D cell culture and various tissue regenerations such as bone, osteoarthritis and cartilage, skin/wound, retinal, neural, and other tissues are discussed. Finally, the advantages and limitations of natural gums are precisely described for future perspectives in tissue engineering and regenerative medicine in the concluding remarks.

Engineering hydrogels by soaking: from mechanical strengthening to environmental adaptation

The soaking strategy could not only strengthen hydrogels with superior mechanical properties but also provide the hydrogels with environmentally adapting properties.

Biological Role of Gellan Gum in Improving Scaffold Drug Delivery, Cell Adhesion Properties for Tissue Engineering Applications

Over the past few decades, gellan gum (GG) has attracted substantial research interest in several fields including biomedical and clinical applications. The GG has highly versatile properties like easy bio-fabrication, tunable mechanical, cell adhesion, biocompatibility, biodegradability, drug delivery, and is easy to functionalize. These properties have put forth GG as a promising material in tissue engineering and regenerative medicine fields. Nevertheless, GG alone has poor mechanical strength, stability, and a high gelling temperature in physiological conditions. However, GG physiochemical properties can be enhanced by blending them with other polymers like chitosan, agar, sodium alginate, starch, cellulose, pullulan, polyvinyl chloride, xanthan gum, and other nanomaterials, like gold, silver, or composites. In this review article, we discuss the comprehensive overview and different strategies for the preparation of GG based biomaterial, hydrogels, and scaffolds for drug delivery, wound healing, antimicrobial activity, and cell adhesion. In addition, we have given special attention to tissue engineering applications of GG, which can be combined with another natural, synthetic polymers and nanoparticles, and other composites materials. Overall, this review article clearly presents a summary of the recent advances in research studies on GG for different biomedical applications.

Biosynthesis, structure and antioxidant activities of xanthan gum from Xanthomonas campestris with additional furfural

Lignocellulosic-like materials are potentially low-cost fermentation substrates, but their pretreatment brings about by-products. This work investigated the effects of furfural on xanthan gum (XG) production, and product quality was evaluated by structure, viscosity and antioxidant capacities. Xanthomonas campestris maintained steady polysaccharide yield (above 13 g·L^-1) with enhanced cell growth at low furfural concentrations (below 3.2 g·L^-1). The products were verified as XG by FT-IR, XRD, NMR and monosaccharide analysis. Moreover, they were found to have reduced acetyl, rising pyruvate and up-to-down glucuronic acid groups as increasing furfural concentration. Furthermore, XG product with 1 g·L^-1 furfural addition showed the best hydroxyl scavenging effects, though reducing powers presented no variation. It was demonstrated that furfural, the common hydrolysis by-product, was not necessarily an inhibitor for fermentation, and an appropriate amount of furfural was beneficial to XG production with steady yield and good quality.

Recyclable Xanthan/TiO2 Composite Cryogels towards the Photodegradation of Cr(VI) Ions and Methylene Blue Dye

Composite cryogels were prepared from xanthan gum (XG) precursor gels at 20 g L-1 containing TiO2 load at 5, 10, and 20 wt% and citric acid, as crosslinker. The effect of the pH over precursor gel on the properties of the resulting cryogels was evaluated. The characterization of the XG/TiO2 cryogels comprised compression tests, swelling degree (SD) determination, Fourier transform infrared vibrational spectroscopy in the attenuated total reflectance mode (FTIR-ATR), scanning electron microscopy (SEM), and X-ray microtomography (CT) analyses. The largest compressive modulus (E) was observed for XG/TiO2 10% cryogels prepared at pH 4.0, which amounted to 100±7 kPa, whereas the E value determined for bare XG cryogels was 29±3 kPa. XG/TiO2 10% cryogels presented larger pores and thicker walls than bare XG cryogels, as evidenced by SEM and CT analyses. FTIR-ATR spectra evidenced the ester bonds stemming from the esterification among carboxylic acid groups and/or XG hydroxyl groups. XG/TiO2 10% cryogels presented SD of (61±2) gwater/gcryogel, long-term stability in water, and outstanding photocatalytic properties in the presence of Cr(VI) ions and methylene blue (MB). The photocatalytic processes for the reduction of Cr(VI) to Cr(III) and for the photobleaching of MB fitted the first-order kinetic model, yielding rate constants of 0.019 varying min-1 and 0.0096 min-1, respectively. For both processes, the XG/TiO2 10% cryogels could be recycled five times without losing shape or efficiency.

Calcium phosphate coatings elaborated by the soaking process on titanium dental implants: Surface preparation, processing and physical-chemical characterization

OBJECTIVE

Dental implant manufacturers are looking for new surfaces to improve osseointegration. It is accepted that calcium phosphate coatings favor bone healing. Among all the techniques, the soaking process seems attractive because of its ability in producing a bioactive coating at low temperature. The objective of this study is to improve the titanium implant surface roughness and chemistry by optimizing the surface preparation and the soaking process parameters to produce a bioactive and adherent calcium phosphate coating.

METHODS

Titanium samples were sandblasted and acid etched. Coatings were realized by an alternate soaking process including a centrifugation step to create a phosphate solution thin film on the implant that reacts with the calcium of the second bath. We performed a characterization of the sample surface with complementary physical and physico-chemical techniques to assess the effect of surface preparation and coating process operating parameters on coating formation and characteristics.

RESULTS

Surface preparation led to a roughness around 1.6μm, micro-porosities, high surface wettability and removed the embedded sandblasting particles. We showed that the centrifugation step is critical and determines the coating formation, coverage and thickness. A thin coating (∼2μm) composed of apatite analogous to bone mineral was deposited. The coating adhesion was demonstrated by screwing/unscrewing test in an artificial jawbone.

SIGNIFICANCE

The titanium dental implant pre-treatment and coating developed in this study is expected to favor early implant osseointegration through coating dissolution in vivo and could be associated with biological active agents to confer additional functionality to the coating.

Fabrication and characterization of hydroxypropyl guar-poly (vinyl alcohol)-nano hydroxyapatite composite hydrogels for bone tissue engineering

Biocompatible bone implants composed of natural materials are highly desirable in orthopedic reconstruction procedures. In this study, novel and ecofriendly bionanocomposite hydrogels were synthesized using a blend of hydroxypropyl guar (HPG), poly vinyl alcohol (PVA), and nano-hydroxyapatite (n-HA) under freeze-thaw and mild reaction conditions. The hydrogel materials were characterized using various techniques. TGA studies indicate that both composites, HPG/PVA and HPG/PVA/n-HA, have higher thermal stability compared to HPG alone whereas HPG/PVA/n-HA shows higher stability compared to PVA alone. The HPG/PVA hydrogel shows porous morphology as revealed by the SEM, which is suitable for bone tissue regeneration. Additionally, the hydrogels were found to be transparent and flexible in nature. In vitro biomineralization study performed in simulated body fluid shows HPG/PVA/n-HA has an apatite like structure. The hydrogel materials were employed as extracellular matrices for biocompatibility studies. In vitro cell viability studies using mouse osteoblast MC3T3 cells were performed by MTT, Trypan blue exclusion, and ethidium bromide/acridine orange staining methods. The cell viability studies reveal that composite materials support cell growth and do not show any signs of cytotoxicity compared to pristine PVA. Osteoblastic activity was confirmed by an increased alkaline phosphatase enzyme activity in MC3T3 bone cells grown on composite hydrogel matrices.

Bioinspired Anti-digestive Hydrogels Selected by a Simulated Gut Microfluidic Chip for Closing Gastrointestinal Fistula

The anti-digestive features given to hydrogels can prolong their action time in gut environment; however, these types of hydrogels have rarely been reported. Inspired by indigestibility of dietary fibers, we introduced an injectable covalent hydrogel through photopolymerization of glycidyl methacrylate-modified xanthan. This newly synthesized hydrogel exhibited a specific concentration-dependent porosity, swelling ratio, and stiffness. The intestinal epithelial cells-6 could grow on the surface of the stiffer hydrogel, and achieved their gut barrier functions. A simulated gut microfluidic chip was manufactured to demonstrate the hydrogel's good performance of anti-digestion compared with the current product, fibrin sealant. Furthermore, calcium ions could induce the swelling-shrinking behavior of the hydrogel, which assisted in removing the hydrogels at the proper time so as to avoid the mismatch of hydrogel degradation and tissue regeneration. Therefore, this hydrogel is expected to be an outstanding gut repair material, especially for closing gastrointestinal fistula.

Biomimetic mineralization of a hydroxyapatite crystal in the presence of a zwitterionic polymer

The biomimetic mineralization of nano-hydroxyapatite using a zwitterionic polymer as a template to cognize the biomineralization of natural bone in vivo.

Application of xanthan gum as polysaccharide in tissue engineering: A review

Xanthan gum is a microbial high molecular weight exo-polysaccharide produced by Xanthomonas bacteria (a Gram-negative bacteria genus that exhibits several different species) and it has widely been used as an additive in various industrial and biomedical applications such as food and food packaging, cosmetics, water-based paints, toiletries, petroleum, oil-recovery, construction and building materials, and drug delivery. Recently, it has shown great potential in issue engineering applications and a variety of modification methods have been employed to modify xanthan gum as polysaccharide for this purpose. However, xanthan gum-based biomaterials need further modification for several targeted applications due to some disadvantages (e.g., processing and mechanical performance of xanthan gum), where modified xanthan gum will be well suited for tissue engineering products. In this review, the current scenario of the use of xanthan gum for various tissue engineering applications, including its origin, structure, properties, modification, and processing for the preparation of the hydrogels and/or the scaffolds is precisely reviewed.

Recombinant DNA technology and click chemistry: a powerful combination for generating a hybrid elastin-like-statherin hydrogel to control calcium phosphate mineralization

Understanding the mechanisms responsible for generating different phases and morphologies of calcium phosphate by elastin-like recombinamers is supreme for bioengineering of advanced multifunctional materials. The generation of such multifunctional hybrid materials depends on the properties of their counterparts and the way in which they are assembled. The success of this assembly depends on the different approaches used, such as recombinant DNA technology and click chemistry. In the present work, an elastin-like recombinamer bearing lysine amino acids distributed along the recombinamer chain has been cross-linked via Huisgen [2 + 3] cycloaddition. The recombinamer contains the SNA15 peptide domains inspired by salivary statherin, a peptide epitope known to specifically bind to and nucleate calcium phosphate. The benefit of using click chemistry is that the hybrid elastin-like-statherin recombinamers cross-link without losing their fibrillar structure. Mineralization of the resulting hybrid elastin-like-statherin recombinamer hydrogels with calcium phosphate is described. Thus, two different hydroxyapatite morphologies (cauliflower- and plate-like) have been formed. Overall, this study shows that crosslinking elastin-like recombinamers leads to interesting matrix materials for the generation of calcium phosphate composites with potential applications as biomaterials.

A detailed study of homogeneous agarose/hydroxyapatite nanocomposites for load-bearing bone tissue

Agarose/hydroxyapatite (agar/HA) nanocomposites for load-bearing bone substitutes were successfully fabricated via a novel in situ precipitation method. Observation via SEM and TEM revealed that the spherical inorganic nanoparticles of approximately 50 nm were well dispersed in the organic matrix, and the crystallographic area combined closely with the amorphous area. The uniform dispersion of HA nanoparticles had prominent effect on improving the mechanical properties of the agar/HA nanocomposites (the highest elastic modulus: 1104.42 MPa; the highest compressive strength: 400.039 MPa), which proved to be potential load-bearing bone substitutes. The thermal stability of agarose and nanocomposites was also studied. The MG63 osteoblast-like cells on the composite disks displayed fusiform and polygonal morphology in the presence of HA, suggesting that the cell maturation was promoted. The results of cell proliferation and cell differentiation indicated that the cells cultured on the agar/HA composite disks significantly increased the alkaline phosphatase activity and calcium deposition. The structural role of agarose in the composite system was investigated to better understand the effect of biopolymer on structure and properties of the composites. The optimal properties were the result of a comprehensive synergy of the components.

Calcium orthophosphate deposits: Preparation, properties and biomedical applications

Since various interactions among cells, surrounding tissues and implanted biomaterials always occur at their interfaces, the surface properties of potential implants appear to be of paramount importance for the clinical success. In view of the fact that a limited amount of materials appear to be tolerated by living organisms, a special discipline called surface engineering was developed to initiate the desirable changes to the exterior properties of various materials but still maintaining their useful bulk performances. In 1975, this approach resulted in the introduction of a special class of artificial bone grafts, composed of various mechanically stable (consequently, suitable for load bearing applications) implantable biomaterials and/or bio-devices covered by calcium orthophosphates (CaPO4) to both improve biocompatibility and provide an adequate bonding to the adjacent bones. Over 5000 publications on this topic were published since then. Therefore, a thorough analysis of the available literature has been performed and about 50 (this number is doubled, if all possible modifications are counted) deposition techniques of CaPO4 have been revealed, systematized and described. These CaPO4 deposits (coatings, films and layers) used to improve the surface properties of various types of artificial implants are the topic of this review.

Fast setting and anti-washout injectable calcium–magnesium phosphate cement for minimally invasive treatment of bone defects

The fa-ICMPC exhibited potent anti-washout properties, fast setting, improved injectability, good biodegradability and osteoconductivity.