Multilayers of cellulose derivatives and chitosan on nanofibrillated cellulose

Biobased Nanomaterials─The Role of Interfacial Interactions for Advanced Materials

This review presents recent advances regarding biomass-based nanomaterials, focusing on their surface interactions. Plant biomass-based nanoparticles, like nanocellulose and lignin from industry side streams, hold great potential for the development of lightweight, functional, biodegradable, or recyclable material solutions for a sustainable circular bioeconomy. However, to obtain optimal properties of the nanoparticles and materials made thereof, it is crucial to control the interactions both during particle production and in applications. Herein we focus on the current understanding of these interactions. Solvent interactions during particle formation and production, as well as interactions with water, polymers, cells and other components in applications, are addressed. We concentrate on cellulose and lignin nanomaterials and their combination. We demonstrate how the surface chemistry of the nanomaterials affects these interactions and how excellent performance is only achieved when the interactions are controlled. We furthermore introduce suitable methods for probing interactions with nanomaterials, describe their advantages and challenges, and introduce some less commonly used methods and discuss their possible applications to gain a deeper understanding of the interfacial chemistry of biobased nanomaterials. Finally, some gaps in current understanding and interesting emerging research lines are identified.

Chitosan-based smart hybrid materials: a physico-chemical perspective

Chitosan is one of the most studied cationic polysaccharides. Due to its unique characteristics of being water soluble, biocompatible, biodegradable, and non-toxic, this macromolecule is highly attractive for a broad range of applications. In addition, its complex behavior and the number of ways it interacts with different components in a system result in an astonishing variety of chitosan-based materials. Herein, we present recent advances in the field of chitosan-based materials from a physico-chemical perspective, with focus on aqueous mixtures with oppositely charged colloids, chitosan-based thin films, and nanocomposite systems. In this review, we focus our attention on the physico-chemical properties of chitosan-based materials, including solubility, mechanical resistance, barrier properties, and thermal behaviour, and provide a link to the chemical peculiarities of chitosan, such as its intrinsic low solubility, high rigidity, large charge separation, and strong tendency to form intra- and inter-molecular hydrogen bonds.

Low - cost multilayered green fiber for the treatment of textile industry waste water

Layer by layer (LbL) assembly can be regarded as an emerging technology for the separation of organic micro-pollutants from water. Direct assembly of polyelectrolytes (PEs) under LbL mode on natural support material is rare. Here we report the integration of LbL to one of the most resourceful support materials that might have an enduring impact on water treatment in color industry. A low-cost adsorbent is developed from chitosan (CHI) and polyacrylic acid (PAA) through LbL deposition on coir fiber (CF) by alternate exposure to their aqueous solutions. Their layer dependent formation is characterized by spectroscopic and microscopic techniques. CHI/PAA multilayer coated coir fiber or simply, layered coir fiber (LCF) showed high loading of cationic and anionic dyes both at acidic and alkaline loading pH. The loading was between 70% and 99% at the acidic pH 3 which is attributed to the binding between LCF and dye molecules by electrostatic and hydrophobic forces. The performance of LCF in presence of NaCl, Na₂SO₄ and sodium dodecyl sulfate (SDS) in dye solution is discussed. Textile industrial waste water showed significant reduction in dye (81%) content along with COD (84%) and TDS.

Stimuli-responsive nanoparticles from ionic cellulose derivatives

Stimuli-responsive nanoparticles (NPs) based on sustainable polymeric feedstock still need more exploration in comparison with NPs based on synthetic polymers. In this report, stimuli-responsive NPs from novel ionic cellulose derivatives were prepared via a facile nanoprecipitation. Cellulose 10-undecenoyl ester (CUE) with a degree of substitution (DS) of 3 was synthesized by esterification of cellulose with 10-undecenoyl chloride. Then, CUE was modified by photo-induced thiol-ene reactions, in order to obtain organo-soluble ionic cellulose derivatives with DSs of ∼3, namely cellulose 11-((3-carboxyl)ethylthio)undecanoate (CUE-MPA), cellulose 11-((2-aminoethyl)thio)undecanoate (CUE-CA), cellulose 11-(2-(2-(diethylamino)ethyl)thio)undecanoate (CUE-DEAET) and cellulose 11-(2-(2-(dimethylamino)ethyl)thio)undecanoate (CUE-DMAET). CUE-MPA could be transformed into NPs with average diameters in the range of 80-330 nm, but these NPs did not show particular stimuli-responsive properties. Moreover, the dropping technique resulted in smaller NPs than a dialysis technique. Stable NPs with average diameters in the range of 90-180 nm showing pH-responsive and switchable sizes were obtained from CUE-DEAET and CUE-DMAET possessing tertiary amines using nanoprecipitation. Thus, altering the terminal functional groups will be a new approach to prepare stimuli-responsive cellulose-derived polymeric NPs.

Self-Healing Hydrogels Based on Carboxymethyl Chitosan and Acryloyl-6-aminocaproic Acid

Once cracks have formed within hydrogel materials, the integrity of the structure is signifcantly compromised, regardless of the application. Here, we demonstrate cross-linked CMCS hydrogels can be engineered to exhibit self-healing under mild conditions. CMCS hydrogels based on CMCS and acryloyl-6-aminocaproic acid (A6ACA) were synthesized by free radical aqueous copolymerization using ammonium persulfate as initiator. A series of hydrogels was synthesized varying the percentage of A6ACA. The hydrogels were characterized by Fourier transform infrared spectroscopy (FTIR) techniques and their morphologies were investigated by scanning electron microscope (SEM) images. When the proportion of A6ACA was increased, the compressive strength, stress, and strain of hydrogels were increased. The cross-linked hydrogel based on CMCS that can autonomously heal between cut surfaces after 1 h was formed under mild conditions. The increase of A6ACA content in the hydrogels will lead to increased mechanical properties and mechanical healing efficiencies for highly cross-linked polymeric networks. Hydrogen bond is the main reason for self-healing ability, and the covalent cross-linkss and noncovalent cross-links both bear loads in the hyrogel. Polymers with the ability to self-repair after sustaining damage could extend the lifetime of materials used in many applications.