Electrospun nanofibrous chitosan membranes modified with polyethyleneimine for formaldehyde detection

High-sensitivity QCM humidity sensor based on chitosan/carboxymethylated multiwalled carbon nanotubes composite for non-contact respiratory monitoring

Respiratory humidity is an important indicator that can reflect respiratory disorders and is easily accessible in daily life, thus attracting attention in non-contact home respiratory monitoring systems. In this work, a high-sensitivity quartz crystal microbalance (QCM) humidity sensor based on a chitosan/carboxymethylated multiwalled carbon nanotubes composite coating is developed with a response time of 36 s and a recovery time of 38 s. The humidity variations from 11 to 97 % can be detected while the wet hysteresis is 0.95 % RH. The sensor also exhibits good repeatability and stability. The physicochemical characterizations of the materials reveal the mechanism of the rapid humidity response, i.e., compared to the physically blended CS with MWCNT, the crosslinking CS-MWCNT formed the new intercalation by stronger hydrogen and amide bonding, which leads to the homogeneous coverage of CS on MWCNT, exposing more active sites and facilitating the binding rate of water molecules. Combined with respiration monitoring, the sensor is able to accurately monitor human respiration rate and depth in real time, effectively predicting and differentiating between different types of obstructive sleep apnea syndromes, providing a fast and reliable solution for daily health monitoring.

Solution and gaseous phase sensing of formaldehyde with economical triphenylmethane based sensors: a tool to estimate formaldehyde content in stored fish samples

The use of formalin to preserve raw food items such as fish, meat, vegetables etc. is very commonly practiced in the present day. Also, formaldehyde (FA), which is the main constituent of formalin solution, is known to cause serious health issues on exposure. Considering the ill effects of formaldehyde, herein we report synthesis of highly sensitive triphenylmethane based formaldehyde (FA) sensors from a single step reaction of inexpensive reagents namely 4-hydroxy benzaldehyde and 2,6-dimethyl phenol. The synthetic method also provides highly pure product in bulk quantity. The analytical activity of the triphenylmethane sensor 1 with a limit of detection (LOD) value of 2.31 × 10-6 M for FA was significantly enhanced through induced deprotonation and thereafter a LOD value of 1.82 × 10-8 M could be achieved. To the best of our knowledge, the LOD value of the deprotonated form (sensor 2) for FA was superior to those of all the FA optical sensors reported so far. The mechanism of sensing was demonstrated by 1H-NMR titration and recording mass spectra before and after addition of FA to a solution of sensor 2. Both sensor 1 and sensor 2 exhibit quenching in emission upon addition of FA. A fluorescence study also demonstrates enhancement in analytical activity of the sensor upon induced deprotonation. Then the sensor was effectively immobilized into a hydrophilic and biocompatible starch-PVA polymer matrix which enabled detection of FA in a 100% aqueous system reversibly. Again, quick and effective sensing of FA in real food samples (stored fish) with the help of a computational application was demonstrated. The sensors have significant practical applicability as they effectively detect FA in real food samples qualitatively and quantitatively.

Green synthesis of carbon quantum dots toward highly sensitive detection of formaldehyde vapors using QCM sensor

In the present study, an eco-friendly method for the preparation of carbon quantum dots (CQDs) is demonstrated using hydrothermal treatment of laurel leaves. The optical and structural characteristics of the prepared CQDs are investigated using transmission electron microscopy (TEM), X-ray photoelectron (XPS), fluorescent and UV-visible spectroscopies, Fourier transform infrared (FTIR), and X-ray diffraction (XRD). The quartz crystal microbalance (QCM) sensor designed and modified with CQDs is capable of detecting formaldehyde vapors in the presence of other interfering chemical-vapor analytes. The changes in the frequency of the QCM sensor are linearly correlated with the injected formaldehyde concentrations. The sensing properties of formaldehyde, including sensitivity and reversibility, are investigated. Detection of formaldehyde in the presence of humidity is carefully discussed for home or workplace room environment use. The adsorption kinetics of various VOCs vapors are also calculated and discussed.

A Review on Electrospinning as Versatile Supports for Diverse Nanofibers and Their Applications in Environmental Sensing

Rapid industrialization is accompanied by the deterioration of the natural environment. The deepening crisis associated with the ecological environment has garnered widespread attention toward strengthening environmental monitoring and protection. Environmental sensors are one of the key technologies for environmental monitoring, ultimately enabling environmental protection. In recent decades, micro/nanomaterials have been widely studied and applied in environmental sensing owing to their unique dimensional properties. Electrospinning has been developed and adopted as a facile, quick, and effective technology to produce continuous micro- and nanofiber materials. The technology has advanced rapidly and become one of the hotspots in the field of nanomaterials research. Environmental sensors made from electrospun nanofibers possess many advantages, such as having a porous structure and high specific surface area, which effectively improve their performance in environmental sensing. Furthermore, by introducing functional nanomaterials (carbon nanotubes, metal oxides, conjugated polymers, etc.) into electrospun fibers, synergistic effects between different materials can be utilized to improve the catalytic activity and sensitivity of the sensors. In this review, we aimed to outline the progress of research over the past decade on electrospinning nanofibers with different morphologies and functional characteristics in environmental sensors.

2D Polymer Nanonets: Controllable Constructions and Functional Applications

Two-dimensional (2D) polymer nanonets have demonstrated great potential in various application fields due to their integrated advantages of ultrafine diameter, small pore size, high porosity, excellent interconnectivity, and large specific surface area. Here, a comprehensive overview of the controlled constructions of the polymer nanonets derived from electrospinning/netting, direct electronetting, self-assembly of cellulose nanofibers, and nonsolvent-induced phase separation is provided. Then, the widely researched multifunctional applications of polymer nanonets in filtration, sensor, tissue engineering, and electricity are also given. Finally, the challenges and possible directions for further developing the polymer nanonets are also intensively highlighted. This article is protected by copyright. All rights reserved.

Highly sensitive formaldehyde sensors based on CuO/ZnO composite nanofibrous mats using porous cellulose acetate fibers as templates

An innovative formaldehyde sensor based on CuO/ZnO composite nanofibrous mats (C-NFMs) coated quartz crystal microbalance (QCM), which is capable of stable determination of formaldehyde gas at ambient temperatures sensitively and selectively, has been successfully fabricated. Triaxial and highly porous C-NFMs with high surface area (126.53 m² g^-1) were synthesized by electrospinning a sol-gel cellulose acetate (CA)/CuAc₂/ZnAc₂ complex solution and following by calcination process. Benefiting from the unique heterojunction structure, immense pore interconnectivity and large surface area of C-NFMs, the as-developed QCM sensors exhibited an extremely low limit of detection (LOD) down to 26 ppb and a limit of quantification value equals to 87 ppb. Besides, the C-NFMs coated QCM sensors also demonstrated short response times (80s), the long-term stability during 3 weeks as well as good selectivity to formaldehyde over diverse volatile organic compounds. The sorption equilibrium in the adsorption process of QCM coated sensors was well met with the Freundlich model, which certified the heterogeneous adsorption between formaldehyde gas and C-NFMs.

Luminescence turn-on response of naphthalene diimide based chemosensor with Formaldehyde: A novel stratagem for estimation of formaldehyde in storage fish samples

A new strategy has been developed for selective estimation of toxic Formaldehyde (FA) in storage fish samples by a simple chemosensor (BNDI) based on naphthalene diimide core in aqueous medium at neutral pH. The rapid "lightning-up" fluorescence feature of BNDI has been implied to detect and estimate aqueous FA selectively at very low concentration. The chemosensing properties of BNDI with aqueous FA have been established through a unique interaction pattern which is proven by different spectroscopic and theoretical analysis.

Electrospinning of chitosan-based nanofibers: from design to prospective applications

Chitosan is a biopolymer originating from renewable resources, with great properties which make it an attractive candidate for plenty of applications of contemporary interest. By manufacturing chitosan into nanofibers using the electrospinning method, its potential is amplified due to the enhancement of the active surface and the low preparation cost. Many attempts were made with the aim of preparing chitosan-based nanofibers with controlled morphology targeting their use for tissue engineering, wound healing, food packaging, drug delivery, air and water purification filters. This was a challenging task, which resulted in a high amount of data, sometimes with apparent contradictory results. In this light, the goal of the paper is to present the main routes reported in the literature for chitosan electrospinning, stressing the advantages and disadvantages of each of them. Special emphasis is placed on the influence of various electrospinning parameters on the morphological characteristics of the fibers and their suitability for distinct applications.

Sensitive Formaldehyde Detection with QCM Sensor Based on PAAm/MWCNTs and PVAm/MWCNTs

Two formaldehyde detection methods are proposed by applying composite film quartz crystal microbalance (QCM) sensors. QCM sensor coated with PAAm/MWCNTs and PVAm/MWCNTs shows excellent characteristics of lower limit and high sensitivity. The lower limit of PVAm/MWCNTs is 0.5 ppm, and its detection sensitivity is 0.74 ppm/Hz. Upon working at different concentrations of formaldehyde and fabricating in different proportions, the reuse performance, gas selectivity, and response at room temperature show contrasting results. The main advantages of the two sensors presented are fast reaction, low cost, and easy manufacture. Compared to other formaldehyde sensors based on QCM, the PAAm/MWCNT- and PVAm/MWCNT-coated QCM sensors are able to concurrently show excellent selectivity, reuse performance, and high sensitivity, which is of great significance to detect the environmental quality.

Recent Advances in Fluorescence Light-Up Endogenous and Exogenous Carbon Monoxide Detection in Biology

Considerable attention has been paid by the scientific community to detect toxic carbon monoxide (CO) in sub-cellular organelles like mitochondria, lysosomes, nuclei, etc. due to their generation and accumulation through numerous biological processes and their role as signal transducer, therapeutics, etc. Various methods are also available for detection of CO, but fluorescence light-up detection is considered the best due to its easy and accurate sensing capability. As of now, no review is available in the literature dedicated to fluorescent detection of only CO both in vitro and in vivo, but considering the huge amount of work reporting every year, it is necessary to have an account of all the recent significant works devoted to it. This review will give special attention to the most noteworthy development of fluorescent light-up probes for the detection of cellular and sub-cellular targetable CO starting from 2012 and emphasizing also the mechanism of action and the applications.

UV-Enhanced Humidity Sensing of Chitosan-SnO2 Hybrid Nanowires

The surface of SnO₂ nanowires was functionalized by chitosan for the development of room-temperature conductometric humidity sensors. SnO₂ nanowires were synthesized by the seed-mediated physical-vapor-deposition (PVD) method. Chitosan layers were deposited on top of the SnO₂ nanowires by spin coating. Surface morphology, crystal structure, and optical properties of the synthesized hybrid nanostructure were investigated by scanning electron microscope, grazing incidence X-ray diffraction, and UV–Vis absorption measurements. During electrical conductivity measurements, the hybrid nanostructure showed unusual behavior towards various relative humidity (RH) concentrations (25%, 50%, 75%), under UV-light irradiation, and in dark conditions. The highest sensor responses were recorded towards an RH level of 75%, resulting in 1.1 in the dark and 2.5 in a UV-irradiated chamber. A novel conduction mechanism of hybrid nanowires is discussed in detail by comparing the sensing performances of chitosan film, SnO₂ nanowires, and chitosan@SnO₂ hybrid nanostructures.

Chitosan wrapped multiwalled carbon nanotubes as quartz crystal microbalance sensing material for humidity detection

In this work, the chitosan wrapped multiwalled carbon nanotubes (MWCNTs-CS) composited material was prepared by surface deposition and crosslinking method. This mild process can maintain the unique properties of the original carbon nanotubes intact. The morphological character of MWCNTs-CS was examined via Fourier transform infrared spectroscopy and field emission scanning electron microscopy. MWCNTs-CS was used as sensing film to fabricate quartz crystal microbalance (QCM) humidity sensors. The optimized sensor possesses high response sensitivity (46.7 Hz/% RH), negligible humidity hysteresis (around 1.1% RH), quick response and recovery time (75 s/34 s), and remarkable reversibility, repeatability, long-term stability and selectivity. Langmuir adsorption isotherm model was used to study the adsorption process of water molecules on MWCNTs-CS film, and the Gibbs free adsorption energy was calculated as -21.85 kJ/mol. By combining the good mechanic properties of MWCNTs and the high hydrophilia of chitosan, the MWCNTs-CS composites are promising for humidity sensing application.

Luminescent, stabilized and environmentally friendly [EuW10O36]9--Chitosan films for sensitive detection of hydrogen peroxide

Fabrications and applications of luminescent films have been an interesting and important challenge within the realm of academia and industry. Herein, a novel fluorescence-based strategy for the H₂O₂ detection has been developed by fabrication of stabilized, thin, transparent, and luminescent films composed of europium-containing polyoxometalates (Eu-POM) and environmentally friendly chitosan (CS) via a facile solution casting approach. In comparison with pure Eu-POM, enhanced fluorescent properties are obtained from the as-prepared Eu-POM/CS films in terms of prolonged fluorescence lifetime and a remarkable fluorescent quenching effect in the presence of hydrogen peroxide (H₂O₂). The fluorescence intensity of Eu-POM/CS films exhibits a linear correlation in response to the H₂O₂ concentration over a wide range of 1.1-66 μM, with a detection limit of 0.11 μM. Furthermore, the fluorescent films display a high detection selectivity which are capable of differentiating hydrogen peroxide (H₂O₂) from the interfering species, such as sugars, l-amino acids, and other metabolites. All these advances towards the development of Eu-POM/CS films open up new applications for luminescent films, but most importantly, they can help in the far-reaching technological implementations of a simple, cost-effective method for the detection of H₂O₂ in many fields.

Polyacrylonitrile Nanofiber-Based Quartz Crystal Microbalance for Sensitive Detection of Safrole

Safrole is the main precursor for producing the amphetamine-type stimulant (ATS) drug, N-methyl-3,4-methylenedioxyamphetamine (MDMA), also known as ecstasy. We devise a polyacrylonitrile (PAN) nanofiber-based quartz crystal microbalance (QCM) for detecting safrole. The PAN nanofibers were fabricated by direct electrospinning to modify the QCM chips. The PAN nanofiber on the QCM chips has a diameter of 240 ± 10 nm. The sensing of safrole by QCM modified with PAN nanofiber shows good reversibility and an apparent sensitivity of 4.6 Hz·L/mg. The proposed method is simple, inexpensive, and convenient for detecting safrole, and can be an alternative to conventional instrumental analytical methods for general volatile compounds.

Competitive removal of heavy metal ions from squid oil under isothermal condition by CR11 chelate ion exchanger

Heavy metal ions (HMIs) are serious threats to the environment. Sub-critical water treatment was used to mimic contamination of squid oil in aqueous, metal-soap and oil phases. Isothermal adsorption of HMIs (Cu²⁺, Pb²⁺, Cd²⁺ and Zn²⁺) was studied from aqueous phase to oil phase (493, 523, 548, and 573K) for solutions with different initial concentration of HMIs was studied. Decomposition of glycerides into fatty acids was favored at high subcritical temperatures, with metal-soap phase showing the highest chelation ability toward Cu²⁺ (96%, isotherm 573K). The removal-ability of HMIs from contaminated oil was performed by CR11 chelate ion exchanger, showing facilitated removal from metal-soap and oil phases at low temperatures compared to general-purpose PEI-chitosan bead and PEI-chitosan fiber sorbents. The chelation behavior of Pb²⁺ and Cd²⁺ was the same in the OIL, with maximum values of 5.7×10^-3 (mol/l) and 5.0×10^-3 (mol/l) at 573K, respectively. By contrast, concentration of Zn²⁺ ion showed a slight increase with increasing temperature due to electrostatic forces between Zn²⁺ and active sites of glycerides in oil phase. For oil solution, the selectivity of adsorption for CR11, especially for Zn²⁺, was at least five-fold larger compared to PEI-chitosan bead and PEI-chitosan fiber adsorbents.

Fluorescent probes and materials for detecting formaldehyde: from laboratory to indoor for environmental and health monitoring

Formaldehyde (FA), as a vital industrial chemical, is widely used in building materials and numerous living products.

Recent advances in cellulose and chitosan based membranes for water purification: A concise review

Recently membrane technology has emerged as a new promising and pervasive technology due to its innate advantages over traditional technologies such as adsorption, distillation and extraction. In this article, some of the recent advances in developing polymeric composite membrane materials for water purification from natural polysaccharide based polymers namely cellulose derivatives and chitosan are concisely reviewed. The impact of human social, demographic and industrial evolution along with expansion through environment has significantly affected the quality of water by pollution with large quantities of pesticides, minerals, drugs or other residues. At the forefront of decontamination and purification techniques, we found the membrane materials from polymers as a potential alternative. In an attempt to reduce the number of technical polymers widely used in the preparation of membranes, many researchers have reported new solutions for desalination or retention of organic yeasts, based on bio renewable polymers like cellulose derivatives and chitosan. These realizations are presented and discussed in terms of the most important parameters of membrane separation especially water flux and retention in this article.

The enhanced formaldehyde-sensing properties of P3HT-ZnO hybrid thin film OTFT sensor and further insight into its stability

A thin-film transistor (TFT) having an organic–inorganic hybrid thin film combines the advantage of TFT sensors and the enhanced sensing performance of hybrid materials. In this work, poly(3-hexylthiophene) (P3HT)-zinc oxide (ZnO) nanoparticles' hybrid thin film was fabricated by a spraying process as the active layer of TFT for the employment of a room temperature operated formaldehyde (HCHO) gas sensor. The effects of ZnO nanoparticles on morphological and compositional features, electronic and HCHO-sensing properties of P3HT-ZnO thin film were systematically investigated. The results showed that P3HT-ZnO hybrid thin film sensor exhibited considerable improvement of sensing response (more than two times) and reversibility compared to the pristine P3HT film sensor. An accumulation p-n heterojunction mechanism model was developed to understand the mechanism of enhanced sensing properties by incorporation of ZnO nanoparticles. X-ray photoelectron spectroscope (XPS) and atomic force microscopy (AFM) characterizations were used to investigate the stability of the sensor in-depth, which reveals the performance deterioration was due to the changes of element composition and the chemical state of hybrid thin film surface induced by light and oxygen. Our study demonstrated that P3HT-ZnO hybrid thin film TFT sensor is beneficial in the advancement of novel room temperature HCHO sensing technology.

Design of an ultra-sensitive gold nanorod colorimetric sensor and its application based on formaldehyde reducing Ag+

HCHO could reduce Ag⁺ to Ag on the surface of AuNRs to form Au core–Ag shell nanorods (Au@Ag↓NRs) in AuNRs–Ag⁺–HCHO system, which caused LPAB of AuNRs to redshift. Thus, a responsive AuNRs colorimetric sensor for the detection HCHO has been developed.

Cyclodextrin facilitated electrospun chitosan nanofibers

Cyclodextrin complexation of chitosan presents a novel route to achieve nanofibers of chitosan and other difficult-to-electrospin biopolymers.

Facile fabrication of hierarchical cellulose nanospicules via hydrolytic hydrogenation

A new spicule-like cellulose nanostructure is prepared from electrospun cellulose nanofibers using a one-pot bifunctional catalysis strategy namely hydrolytic hydrogenation. The electrospun cellulose nanofibers or cellulose film was treated in presence of catalyst consisting of an alkali and a metal to produce celluloses with structures like nanospicules, nanoflowers or nanorods, respectively. This work highlights the promising combination of electrospinning and hydrolysis/hydrogenation for facile production of hierarchical cellulose nanostructures such as nanospicules and nanorods.