True molecular solutions of natural cellulose in the binary ionic liquid-containing solvent mixtures

Lyophilized Emulsions of Thymol and Eugenol Essential Oils Encapsulated in Cellulose

Efforts to tap into the broad antimicrobial, insecticidal, and antioxidant activities of essential oils (EOs) are limited due to their strong odor and susceptibility to light and oxidation. Encapsulation of EOs and subsequent drying overcome these limitations and extend their applications. This study characterized freeze-dried (lyophilized) emulsions of eugenol (EU) and thymol (TY) EOs, encapsulated by chemically unmodified cellulose, a sustainable and low-cost resource. High-resolution scanning electron microscopy showed successful lyophilization. While the observed "flake-like" structure of the powders differed significantly from that of the emulsified microcapsules, useful properties were retained. Fourier transform infrared spectroscopy confirmed the presence of EOs in their corresponding powders and thermo-gravimetric analysis demonstrated high encapsulation efficiency (87-88%), improved thermal stability and resistance to evaporation, and slow EO release rates in comparison to their free forms. The lightweight and low-cost cellulose encapsulation, together with the results showing retained properties of the dried powder, enable the use of EOs in applications requiring high temperatures, such as EO incorporation into polymer films, that can be used to protect agricultural crops from microbial infections.

Investigation of Cellulose-Based Materials Applied in Life Sciences Using Laser Light Scattering Methods

This review emphasizes the practical importance of laser light scattering methods for characterizing cellulose and its derivatives. The physicochemical parameters like molecular weights, the radius of gyration, hydrodynamic radius, and conformation will be considered when the reproducibility of polymer behavior in solution is necessary for the subsequent optimization of the property profile of a designed product. Since there are various sources of cellulose, and the methods of cellulose extraction and chemical modification have variable yields, materials with variable molecular weights, and size polydispersity will often result. Later, the molecular masses will influence other physicochemical properties of cellulosic materials, both in solution and solid state. Consequently, the most rigorous determination of these quantities is imperative. In this regard, the following are presented and discussed in this review: the theoretical foundations of the light scattering phenomenon, the evolution of the specific instrumentation and detectors, the development of the detector-coupling techniques which include a light scattering detector, and finally, the importance of the specific parameters of polymers in solution, resulting from the data analysis of light scattering signals. All these aspects are summarized according to the chemical classification of the materials: celluloses, esters of cellulose, co-esters of cellulose, alkyl esters of cellulose, ethers of cellulose, and other heterogeneous cellulose derivatives with applications in life sciences.

Facile dissolution of cellulose by superbase-derived ionic liquid using organic solvents as co-solvents at mild temperatures

Dissolving cellulose at low temperatures is a key step in its efficient utilization as a renewable resource to produce high-value-added platform chemicals and high-performance materials. Here, the potential of four aprotic organic solvents was investigated for use as co-solvents with a sustainable DBU-derived ionic liquid (SIL) for the low-temperature dissolution and regeneration of cellulose. Combined experiments, density functional theory calculations, and molecular dynamic simulations were performed. The type and amount of co-solvent were found to have a significant impact on the solubility of cellulose, the dissolution process, and the structure of regenerated cellulose. The addition of organic solvents can significantly reduce the cellulose dissolution temperature and increase the solubility. Among the solvents assessed, 40 wt% DMSO exhibited the most effective synergistic interaction with SIL, where the solubility of cellulose was 14.6 wt% at 75 °C. Subsequently, the effects of the different types and amounts of co-solvents on the microscopic morphology and chemical structure of regenerated cellulose were thoroughly explored. The results showed that different types of organic solvents had different effects on the microstructure of regenerated cellulose. The results may guide the manufacturing specifications of high-performance regenerated fiber materials.

Properties and applications of cellulose regenerated from cellulose/imidazolium-based ionic liquid/co-solvent solutions: A short review

An improvement of ecological conscience currently has increased the consciousness of researchers in reducing the processing time and cost of solvent for the dissolution of cellulose. Latterly, ionic liquids have been employed to process cellulose as they are recyclable and nonvolatile. Besides that, biopolymers such as chitosan, chitin, starch, protein, and cellulose acetate can also be processed by using ionic liquids for diverse applications. In this short review, examples of imidazolium-based ionic liquids that are commonly used for the dissolution of cellulose are implied. Furthermore, examples of organic liquids that are utilized as co-solvents for ionic liquids were revealed. In addition, examples of imidazolium-based ionic liquid/co-solvent mixtures utilized in the dissolution of cellulose and other biopolymers are also demonstrated. The properties and applications of cellulose and its blends regenerated from different types of cellulose/imidazolium-based ionic liquid/co-solvent solutions are also shortly reviewed. The information acquired from this review gives a better understanding of the changes in the properties of regenerated cellulose and regenerated cellulose blends. In addition, this short review serves as a model basis for the creation of novel applications of regenerated cellulose and regenerated cellulose blends by utilizing imidazolium-based ionic liquid/co-solvent mixtures.

Partially Acetylated Cellulose Dissolved in Aqueous Solution: Physical Properties and Enzymatic Hydrolysis

Cellulose acetate is one of the most important cellulose derivatives. The use of ionic liquids in cellulose processing was recently found to act both as a solvent and also as a reagent. A recent study showed that cellulose dissolution in the ionic liquid 1-ethyl-3-methylimidazoliumacetate (EMIMAc) mixed with dichloromethane (DCM) resulted in controlled homogenous cellulose acetylation; yielding water-soluble cellulose acetate (WSCA). This research investigated the properties of cellulose acetate prepared in this manner, in an aqueous solution. The results revealed that WSCA fully dissolves in water, with no significant sign of molecular aggregation. Its conformation in aqueous solution exhibited a very large persistence length, estimated as over 10 nm. The WSCA exhibited surface activity, significantly reducing the surface tension of water. Because of the molecular dissolution of WSCA in water, augmented by its amphiphilicity, aqueous solutions of WSCA exhibited an overwhelmingly high rate of enzymatic hydrolysis.

Molecular partitioning in ternary solutions of cellulose

Neutron scattering measurements on the structure and dynamics of ternary solutions of microcrystalline cellulose (MC) in mixtures of an ionic liquid (IL) 1-ethyl-3-methylimidazolium acetate and a polar organic solvent dimethylformamide (DMF) have shown that MC can be fully dissolved in solvent mixtures. Data also show the molecular partitioning of IL into coexisting states. The structure partitioning is manifested as IL adsorbed to cellulose molecules with additional IL self-assembled to form clusters in solution, while the dynamics partitioning shows dynamical heterogeneities of the IL with slow dynamics resembling neat IL and fast dynamics being coupled with the solvent. The composition dependence of the molecular partitioning results in a solubility gap in dilute cellulose solutions and a phase boundary criterion of the molar ratio of IL / MC ∼ 3 in more concentrated regimes. The two characteristics together define the main features of the dissolution phase diagram of ternary cellulose mixtures of MC / IL / DMF at the room temperature.

New Insights on the Role of Urea on the Dissolution and Thermally-Induced Gelation of Cellulose in Aqueous Alkali

The gelation of cellulose in alkali solutions is quite relevant, but still a poorly understood process. Moreover, the role of certain additives, such as urea, is not consensual among the community. Therefore, in this work, an unusual set of characterization methods for cellulose solutions, such as cryo-transmission electronic microscopy (cryo-TEM), polarization transfer solid-state nuclear magnetic resonance (PTssNMR) and diffusion wave spectroscopy (DWS) were employed to study the role of urea on the dissolution and gelation processes of cellulose in aqueous alkali. Cryo-TEM reveals that the addition of urea generally reduces the presence of undissolved cellulose fibrils in solution. These results are consistent with PTssNMR data, which show the reduction and in some cases the absence of crystalline portions of cellulose in solution, suggesting a pronounced positive effect of the urea on the dissolution efficiency of cellulose. Both conventional mechanical macrorheology and microrheology (DWS) indicate a significant delay of gelation induced by urea, being absent until ca. 60 °C for a system containing 5 wt % cellulose, while a system without urea gels at a lower temperature. For higher cellulose concentrations, the samples containing urea form gels even at room temperature. It is argued that since urea facilitates cellulose dissolution, the high entanglement of the cellulose chains in solution (above the critical concentration, C*) results in a strong three-dimensional network.

Structural Analysis of Cellulose-Coated Oil-in-Water Emulsions Fabricated from Molecular Solution

Natural cellulose has been used as a coating to stabilize oil-in-water (o/w) emulsions by exploiting the amphiphilic character of the cellulose chains molecularly dissolved in the ionic liquid 1-ethyl-3-methylimidazolium acetate. Its cellulose coating exhibits a continuous amorphous structure which differs significantly from the cellulose particle stabilization used in Pickering emulsions. The structure of these cellulose-coated o/w emulsion particles, in particular the cellulose coating shell characteristics (thickness, porosity, and composition), is studied by using a combination of direct imaging methods such as cryogenic electron microscopy and fluorescence microscopy with small-angle neutron scattering measurements. This work suggests a unique multicompartment structure of the emulsion particles: an oil core, surrounded by an inner shell composed of a porous cellulose gel, encapsulated by a dense outer cellulose shell, a few nanometers in thickness. The thickness of the inner cellulose shell varies significantly. The nanoscale emulsion droplets exhibit a thickness of 10 ± 3 nm, whereas the larger micron-sized droplets exhibit a thicker inner cellulose shell of 500-750 nm. It is also inferred that the cellulose shells contain water rather than oil.

Recent Advances in Solvents for the Dissolution, Shaping and Derivatization of Cellulose: Quaternary Ammonium Electrolytes and their Solutions in Water and Molecular Solvents

There is a sustained interest in developing solvents for physically dissolving cellulose, i.e., without covalent bond formation. The use of ionic liquids, ILs, has generated much interest because of their structural versatility that results in efficiency as cellulose solvents. Despite some limitations, imidazole-based ILs have received most of the scientific community’s attention. The objective of the present review is to show the advantages of using quaternary ammonium electrolytes, QAEs, including salts of super bases, as solvents for cellulose dissolution, shaping, and derivatization, and as a result, increase the interest in further investigation of these important solvents. QAEs share with ILs structural versatility; many are liquids at room temperature or are soluble in water and molecular solvents (MSs), in particular dimethyl sulfoxide. In this review we first give a historical background on the use of QAEs in cellulose chemistry, and then discuss the common, relatively simple strategies for their synthesis. We discuss the mechanism of cellulose dissolution by QAEs, neat or as solutions in MSs and water, with emphasis on the relevance to cellulose dissolution efficiency of the charge and structure of the cation and. We then discuss the use of cellulose solutions in these solvents for its derivatization under homogeneous and heterogeneous conditions. The products of interest are cellulose esters and ethers; our emphasis is on the role of solvent and possible side reactions. The final part is concerned with the use of cellulose dopes in these solvents for its shaping as fibers, a field with potential commercial application.

Enhanced hydrolysis of cellulose hydrogels by morphological modification

Cellulose is one of the most abundant bio-renewable materials on earth, yet the potential of cellulosic bio-fuels is not fully exploited, primarily due to the high costs of conversion. Hydrogel particles of regenerated cellulose constitute a useful substrate for enzymatic hydrolysis, due to their porous and amorphous structure. This article describes the influence of several structural aspects of the cellulose hydrogel on its hydrolysis. The hydrogel density was shown to be directly proportional to the cellulose concentration in the initial solution, thus affecting its hydrolysis rate. Using high-resolution scanning electron microscopy, we show that the hydrogel particles in aqueous suspension exhibit a dense external surface layer and a more porous internal network. Elimination of the external surface layer accelerated the hydrolysis rate by up to sixfold and rendered the process nearly independent of cellulose concentration. These findings may be of practical relevance to saccharification processing costs, by reducing required solvent quantities and enzyme load.

Sustainable and Low Viscous 1-Allyl-3-methylimidazolium Acetate + PEG Solvent for Cellulose Processing

Developing sustainable, low viscous and efficient solvents are always advantageous to the processing/fabricating of cellulose materials in practical applications. To this end, in this work novel solvents were developed; ([Amim][CH₃COO]/PEG) by dissolving polyethylene glycol 200 (PEG-200) in 1-allyl-3-methylimidazolium acetate ([Amim][CH₃COO]). The solubilities of cellulose in [Amim][CH₃COO]/PEG solvents were determined as a function of temperature, and the possible dissolution mechanism of cellulose in [Amim][CH₃COO]/PEG solvent was investigated. The novel solvent exhibits outstanding advantages for good dissolution capacity of cellulose, such as low viscosity, negligible vapor pressure, and recycling capability. The [CH₃COO]^- anion and the [Amim]⁺ cation of [Amim][CH₃COO] in [Amim][CH₃COO]/PEG-10 are the driving force for cellulose dissolution verified by the ¹³C NMR spectra. In addition, the regenerated cellulose films from [Amim][CH₃COO]/PEG solvent were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), and thermogravimetric analysis (TGA) to estimate their morphologies and structures.

Nano-Structural Investigation on Cellulose Highly Dissolved in Ionic Liquid: A Small Angle X-ray Scattering Study

We investigated nano-structural changes of cellulose dissolved in 1-ethyl-3-methylimidazolium acetate-an ionic liquid (IL)-using a small angle X-ray scattering (SAXS) technique over the entire concentration range (0-100 mol %). Fibril structures of cellulose disappeared at 40 mol % of cellulose, which is a significantly higher concentration than the maximum concentration of dissolution (24-28 mol %) previously determined in this IL. This behavior is explained by the presence of the anion bridging, whereby an anion prefers to interact with multiple OH groups of different cellulose molecules at high concentrations, discovered in our recent work. Furthermore, we observed the emergence of two aggregated nano-structures in the concentration range of 30-80 mol %. The diameter of one structure was 12-20 nm, dependent on concentration, which is ascribed to cellulose chain entanglement. In contrast, the other with 4.1 nm diameter exhibited concentration independence and is reminiscent of a cellulose microfibril, reflecting the occurrence of nanofibrillation. These results contribute to an understanding of the dissolution mechanism of cellulose in ILs. Finally, we unexpectedly proposed a novel cellulose/IL composite: the cellulose/IL mixtures of 30-50 mol % that possess liquid crystallinity are sufficiently hard to be moldable.

Ionic liquids and deep eutectic solvents for lignocellulosic biomass fractionation

State of the art overview of the fractionation of lignocellulosic biomass with ionic liquids and deep eutectic solvents.

Anion Bridging-Induced Structural Transformation of Cellulose Dissolved in Ionic Liquid

We performed structural investigations of cellulose mixed with 1-ethyl-3-methylimidazolium acetate ([Emim][OAc]) in the entire concentration range (0-100 mol %) by wide-angle X-ray scattering with the aid of quantum chemical calculations and ¹³C solid-state NMR spectroscopy. We particularly focused on a highly concentrated region (≥30 mol %), which has previously been overlooked. At concentrations of 15-30 mol %, a periodic peak corresponding to cellulose chain alignment emerged; this is associated with a lyotropic cholesteric liquid-crystalline phase. At concentrations of ≥30 mol %, the structure is transformed into ordered layers where OAc anions and Emim cations intercalate. This transformation is found to be driven by a change in the interaction between the IL anions and the OH groups of cellulose. At low concentrations, the anion mainly interacts with the OH group of cellulose in a 1:1 ratio, as previously reported; at high concentrations, the anions bridge the OH groups of two cellulose chains.

Reversible and non-reactive cellulose separations from ionic liquid mixtures with compressed carbon dioxide

A novel physical (non-reactive) separation of cellulose from an ionic liquid (IL)/cosolvent mixture by compressed carbon dioxide is presented. The precipitation is completely reversible and rapid within small changes of pressure i.e. liquid phase CO2 composition. High pressure phase equilibrium, high pressure NMR, and solid state NMR have been utilized to understand the separation phenomena.

Cellulose gel dispersion: From pure hydrogel suspensions to encapsulated oil-in-water emulsions

Cellulose hydrogel particles were fabricated from molecularly-dissolved cellulose/IL solutions. The characteristics of the formed hydrogels (cellulose content, particles' size and porosity) were determined as a function of cellulose concentration in the precursor solutions. There is a significant change in the hydrogel structure when the initial cellulose solution concentration increases above about 7-9%wt. These changes include increase of the cellulose content in the hydrogel, and decrease in its pore size. The finest cellulose particle dispersions can be obtained using low concentration cellulose/IL solutions (cellulose concentration in dispersion less than 2%wt.) or hydrogels (concentration less than 1%wt.) in a dispersing medium consisting of IL with no more than 20%wt. water. Stable paraffin oil-in-water emulsions are achieved by mixing oil and water with cellulose/IL solutions. The optimal conditions for obtaining the finest particles (about 20μm in diameter) are attained using cellulose solutions of concentration between 0.7 and 4%wt. at temperature of 70°C and oil/cellulose mass ratios between 1 and 1.5.

From cellulose fibrils to single chains: understanding cellulose dissolution in ionic liquids

Continued improvement on the structure of elementary fibrils, simulation of larger elementary fibrils and systematic work on the solution structure of cellulose in ILs are three interacting modules to unravel the mechanism of cellulose dissolution in ILs.